Skip to content

Instantly share code, notes, and snippets.

@gokrazy-bot

gokrazy-bot/boot-log-2024-03-02T03:45:00Z Secret

Created March 2, 2024 03:45
Show Gist options
  • Save gokrazy-bot/eaf5bb50c0cb0d429286d9e9bb85a731 to your computer and use it in GitHub Desktop.
Save gokrazy-bot/eaf5bb50c0cb0d429286d9e9bb85a731 to your computer and use it in GitHub Desktop.
Download ZIP
gokrazy boot log
Raw
boot-log-2024-03-02T03:45:00Z
(drain) [Raspberry Pi 3 B+] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Linux version 6.7.6 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
(drain) [Raspberry Pi 3 B+] [ 0.000000] KASLR enabled
(drain) [Raspberry Pi 3 B+] [ 0.000000] random: crng init done
(drain) [Raspberry Pi 3 B+] [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
(drain) [Raspberry Pi 3 B+] [ 0.000000] efi: UEFI not found.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
(drain) [Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
(drain) [Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: No NUMA configuration found
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: NODE_DATA [mem 0x372079c0-0x37209fff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Zone ranges:
(drain) [Raspberry Pi 3 B+] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] DMA32 empty
(drain) [Raspberry Pi 3 B+] [ 0.000000] Normal empty
(drain) [Raspberry Pi 3 B+] [ 0.000000] Movable zone start for each node
(drain) [Raspberry Pi 3 B+] [ 0.000000] Early memory node ranges
(drain) [Raspberry Pi 3 B+] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
(drain) [Raspberry Pi 3 B+] [ 0.000000] percpu: Embedded 22 pages/cpu s51304 r8192 d30616 u90112
(drain) [Raspberry Pi 3 B+] [ 0.000000] Detected VIPT I-cache on CPU0
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 843419
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 845719
(drain) [Raspberry Pi 3 B+] [ 0.000000] alternatives: applying boot alternatives
(drain) [Raspberry Pi 3 B+] [ 0.000000] Kernel command line: dma.dmachans=0x7ff5 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x46461240 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-557c925d0001/PARTNROFF=2 init=/gokrazy/init rootwait panic=10 oops=panic
(drain) [Raspberry Pi 3 B+] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Fallback order for Node 0: 0
(drain) [Raspberry Pi 3 B+] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
(drain) [Raspberry Pi 3 B+] [ 0.000000] Policy zone: DMA
(drain) [Raspberry Pi 3 B+] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
(drain) [Raspberry Pi 3 B+] [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
(drain) [Raspberry Pi 3 B+] [ 0.000000] software IO TLB: area num 4.
(drain) [Raspberry Pi 3 B+] [ 0.000000] software IO TLB: mapped [mem 0x0000000035f00000-0x0000000036000000] (1MB)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Memory: 830936K/970752K available (21760K kernel code, 5044K rwdata, 13968K rodata, 11072K init, 855K bss, 74280K reserved, 65536K cma-reserved)
(drain) [Raspberry Pi 3 B+] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU event tracing is enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Trampoline variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Tracing variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
(drain) [Raspberry Pi 3 B+] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
(drain) [Raspberry Pi 3 B+] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
(drain) [Raspberry Pi 3 B+] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
(drain) [Raspberry Pi 3 B+] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
(drain) [Raspberry Pi 3 B+] [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
(drain) [Raspberry Pi 3 B+] [ 0.000548] Console: colour dummy device 80x25
(drain) [Raspberry Pi 3 B+] [ 0.000564] printk: legacy console [tty1] enabled
(drain) [Raspberry Pi 3 B+] [ 0.001553] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
(drain) [Raspberry Pi 3 B+] [ 0.001600] pid_max: default: 32768 minimum: 301
(drain) [Raspberry Pi 3 B+] [ 0.001738] LSM: initializing lsm=capability,landlock,integrity
(drain) [Raspberry Pi 3 B+] [ 0.001823] landlock: Up and running.
(drain) [Raspberry Pi 3 B+] [ 0.001971] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.002023] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.004679] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B+] [ 0.004817] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B+] [ 0.005208] rcu: Hierarchical SRCU implementation.
(drain) [Raspberry Pi 3 B+] [ 0.005234] rcu: Max phase no-delay instances is 1000.
(drain) [Raspberry Pi 3 B+] [ 0.009216] EFI services will not be available.
(drain) [Raspberry Pi 3 B+] [ 0.009666] smp: Bringing up secondary CPUs ...
(drain) [Raspberry Pi 3 B+] [ 0.010374] Detected VIPT I-cache on CPU1
(drain) [Raspberry Pi 3 B+] [ 0.010511] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.011443] Detected VIPT I-cache on CPU2
(drain) [Raspberry Pi 3 B+] [ 0.011547] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.012551] Detected VIPT I-cache on CPU3
(drain) [Raspberry Pi 3 B+] [ 0.012655] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.012900] smp: Brought up 1 node, 4 CPUs
(drain) [Raspberry Pi 3 B+] [ 0.013023] SMP: Total of 4 processors activated.
(drain) [Raspberry Pi 3 B+] [ 0.013047] CPU features: detected: 32-bit EL0 Support
(drain) [Raspberry Pi 3 B+] [ 0.013069] CPU features: detected: 32-bit EL1 Support
(drain) [Raspberry Pi 3 B+] [ 0.013094] CPU features: detected: CRC32 instructions
(drain) [Raspberry Pi 3 B+] [ 0.013178] CPU: All CPU(s) started at EL2
(drain) [Raspberry Pi 3 B+] [ 0.013215] alt
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 supervise.go:568: sending sigterm to all services
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 randomd.go:92: persisting random seed failed: open /perm/random.seed: read-only file system
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 supervise.go:580: all services shut down
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 update.go:406: Unmounting /perm
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 update.go:408: unmounting /perm failed: invalid argument
[Raspberry Pi 3 B+] 2024/03/02 04:44:04 update.go:353: Rebooting
[Raspberry Pi 3 B+] [ 193.462482] kvm: exiting hardware virtualization
[Raspberry Pi 3 B+] [ 193.469080] reboot: Restarting system
[Raspberry Pi 3 B+] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.000000] Linux version 6.7.7 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
[Raspberry Pi 3 B+] [ 0.000000] KASLR enabled
[Raspberry Pi 3 B+] [ 0.000000] random: crng init done
[Raspberry Pi 3 B+] [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[Raspberry Pi 3 B+] [ 0.000000] efi: UEFI not found.
[Raspberry Pi 3 B+] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[Raspberry Pi 3 B+] [ 0.000000] NUMA: No NUMA configuration found
[Raspberry Pi 3 B+] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] NUMA: NODE_DATA [mem 0x372069c0-0x37208fff]
[Raspberry Pi 3 B+] [ 0.000000] Zone ranges:
[Raspberry Pi 3 B+] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] DMA32 empty
[Raspberry Pi 3 B+] [ 0.000000] Normal empty
[Raspberry Pi 3 B+] [ 0.000000] Movable zone start for each node
[Raspberry Pi 3 B+] [ 0.000000] Early memory node ranges
[Raspberry Pi 3 B+] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
[Raspberry Pi 3 B+] [ 0.000000] percpu: Embedded 22 pages/cpu s51304 r8192 d30616 u90112
[Raspberry Pi 3 B+] [ 0.000000] Detected VIPT I-cache on CPU0
[Raspberry Pi 3 B+] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 843419
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 845719
[Raspberry Pi 3 B+] [ 0.000000] alternatives: applying boot alternatives
[Raspberry Pi 3 B+] [ 0.000000] Kernel command line: dma.dmachans=0x7ff5 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x46461240 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-557c925d0001/PARTNROFF=2 init=/gokrazy/init rootwait panic=10 oops=panic
[Raspberry Pi 3 B+] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[Raspberry Pi 3 B+] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[Raspberry Pi 3 B+] [ 0.000000] Fallback order for Node 0: 0
[Raspberry Pi 3 B+] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
[Raspberry Pi 3 B+] [ 0.000000] Policy zone: DMA
[Raspberry Pi 3 B+] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[Raspberry Pi 3 B+] [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[Raspberry Pi 3 B+] [ 0.000000] software IO TLB: area num 4.
[Raspberry Pi 3 B+] [ 0.000000] software IO TLB: mapped [mem 0x0000000035f00000-0x0000000036000000] (1MB)
[Raspberry Pi 3 B+] [ 0.000000] Memory: 830932K/970752K available (21760K kernel code, 5044K rwdata, 13968K rodata, 11072K init, 855K bss, 74284K reserved, 65536K cma-reserved)
[Raspberry Pi 3 B+] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Raspberry Pi 3 B+] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU event tracing is enabled.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[Raspberry Pi 3 B+] [ 0.000000] Trampoline variant of Tasks RCU enabled.
[Raspberry Pi 3 B+] [ 0.000000] Tracing variant of Tasks RCU enabled.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[Raspberry Pi 3 B+] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[Raspberry Pi 3 B+] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[Raspberry Pi 3 B+] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[Raspberry Pi 3 B+] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[Raspberry Pi 3 B+] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Raspberry Pi 3 B+] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Raspberry Pi 3 B+] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Raspberry Pi 3 B+] [ 0.000553] Console: colour dummy device 80x25
[Raspberry Pi 3 B+] [ 0.000569] printk: legacy console [tty1] enabled
[Raspberry Pi 3 B+] [ 0.001532] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[Raspberry Pi 3 B+] [ 0.001579] pid_max: default: 32768 minimum: 301
[Raspberry Pi 3 B+] [ 0.001711] LSM: initializing lsm=capability,landlock,integrity
[Raspberry Pi 3 B+] [ 0.001796] landlock: Up and running.
[Raspberry Pi 3 B+] [ 0.001941] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.001993] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.004619] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B+] [ 0.004756] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B+] [ 0.005143] rcu: Hierarchical SRCU implementation.
[Raspberry Pi 3 B+] [ 0.005169] rcu: Max phase no-delay instances is 1000.
[Raspberry Pi 3 B+] [ 0.009095] EFI services will not be available.
[Raspberry Pi 3 B+] [ 0.009537] smp: Bringing up secondary CPUs ...
[Raspberry Pi 3 B+] [ 0.010240] Detected VIPT I-cache on CPU1
[Raspberry Pi 3 B+] [ 0.010377] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.011298] Detected VIPT I-cache on CPU2
[Raspberry Pi 3 B+] [ 0.011399] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.012381] Detected VIPT I-cache on CPU3
[Raspberry Pi 3 B+] [ 0.012482] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.012729] smp: Brought up 1 node, 4 CPUs
[Raspberry Pi 3 B+] [ 0.012849] SMP: Total of 4 processors activated.
[Raspberry Pi 3 B+] [ 0.012873] CPU features: detected: 32-bit EL0 Support
[Raspberry Pi 3 B+] [ 0.012894] CPU features: detected: 32-bit EL1 Support
[Raspberry Pi 3 B+] [ 0.012918] CPU features: detected: CRC32 instructions
[Raspberry Pi 3 B+] [ 0.012999] CPU: All CPU(s) started at EL2
[Raspberry Pi 3 B+] [ 0.013034] alternatives: applying system-wide alternatives
[Raspberry Pi 3 B+] [ 0.015889] devtmpfs: initialized
[Raspberry Pi 3 B+] [ 0.027561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Raspberry Pi 3 B+] [ 0.027636] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B+] [ 0.030790] pinctrl core: initialized pinctrl subsystem
[Raspberry Pi 3 B+] [ 0.033874] DMI not present or invalid.
[Raspberry Pi 3 B+] [ 0.035456] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[Raspberry Pi 3 B+] [ 0.040860] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.041098] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.041486] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.041850] audit: initializing netlink subsys (disabled)
[Raspberry Pi 3 B+] [ 0.042166] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[Raspberry Pi 3 B+] [ 0.044163] thermal_sys: Registered thermal governor 'step_wise'
[Raspberry Pi 3 B+] [ 0.044175] thermal_sys: Registered thermal governor 'power_allocator'
[Raspberry Pi 3 B+] [ 0.044303] cpuidle: using governor menu
[Raspberry Pi 3 B+] [ 0.045621] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[Raspberry Pi 3 B+] [ 0.045801] ASID allocator initialised with 32768 entries
[Raspberry Pi 3 B+] [ 0.049789] Serial: AMBA PL011 UART driver
[Raspberry Pi 3 B+] [ 0.077903] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[Raspberry Pi 3 B+] [ 0.077955] Modules: 0 pages in range for non-PLT usage
[Raspberry Pi 3 B+] [ 0.077962] Modules: 511056 pages in range for PLT usage
[Raspberry Pi 3 B+] [ 0.079088] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.079138] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[Raspberry Pi 3 B+] [ 0.079165] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.079190] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[Raspberry Pi 3 B+] [ 0.079216] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.079240] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[Raspberry Pi 3 B+] [ 0.079266] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.079291] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[Raspberry Pi 3 B+] [ 0.081674] ACPI: Interpreter disabled.
[Raspberry Pi 3 B+] [ 0.085504] iommu: Default domain type: Translated
[Raspberry Pi 3 B+] [ 0.085535] iommu: DMA domain TLB invalidation policy: strict mode
[Raspberry Pi 3 B+] [ 0.086102] SCSI subsystem initialized
[Raspberry Pi 3 B+] [ 0.086702] usbcore: registered new interface driver usbfs
[Raspberry Pi 3 B+] [ 0.086780] usbcore: registered new interface driver hub
[Raspberry Pi 3 B+] [ 0.086855] usbcore: registered new device driver usb
[Raspberry Pi 3 B+] [ 0.087126] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[Raspberry Pi 3 B+] [ 0.088493] mc: Linux media interface: v0.10
[Raspberry Pi 3 B+] [ 0.088584] videodev: Linux video capture interface: v2.00
[Raspberry Pi 3 B+] [ 0.088702] pps_core: LinuxPPS API ver. 1 registered
[Raspberry Pi 3 B+] [ 0.088727] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Raspberry Pi 3 B+] [ 0.088783] PTP clock support registered
[Raspberry Pi 3 B+] [ 0.089019] EDAC MC: Ver: 3.0.0
[Raspberry Pi 3 B+] [ 0.089789] scmi_core: SCMI protocol bus registered
[Raspberry Pi 3 B+] [ 0.091230] FPGA manager framework
[Raspberry Pi 3 B+] [ 0.091419] Advanced Linux Sound Architecture Driver Initialized.
[Raspberry Pi 3 B+] [ 0.093348] vgaarb: loaded
[Raspberry Pi 3 B+] [ 0.094864] clocksource: Switched to clocksource arch_sys_counter
[Raspberry Pi 3 B+] [ 0.095233] VFS: Disk quotas dquot_6.6.0
[Raspberry Pi 3 B+] [ 0.095299] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Raspberry Pi 3 B+] [ 0.095644] pnp: PnP ACPI: disabled
[Raspberry Pi 3 B+] [ 0.107159] NET: Registered PF_INET protocol family
[Raspberry Pi 3 B+] [ 0.107419] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[Raspberry Pi 3 B+] [ 0.109237] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[Raspberry Pi 3 B+] [ 0.109305] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B+] [ 0.109410] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B+] [ 0.109552] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B+] [ 0.109932] TCP: Hash tables configured (established 8192 bind 8192)
[Raspberry Pi 3 B+] [ 0.110148] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.110220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.110425] NET: Registered PF_UNIX/PF_LOCAL protocol family
[Raspberry Pi 3 B+] [ 0.111079] RPC: Registered named UNIX socket transport module.
[Raspberry Pi 3 B+] [ 0.111110] RPC: Registered udp transport module.
[Raspberry Pi 3 B+] [ 0.111131] RPC: Registered tcp transport module.
[Raspberry Pi 3 B+] [ 0.111151] RPC: Registered tcp-with-tls transport module.
[Raspberry Pi 3 B+] [ 0.111172] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Raspberry Pi 3 B+] [ 0.113573] PCI: CLS 0 bytes, default 64
[Raspberry Pi 3 B+] [ 0.115028] kvm [1]: IPA Size Limit: 40 bits
[Raspberry Pi 3 B+] [ 0.120271] kvm [1]: Hyp mode initialized successfully
[Raspberry Pi 3 B+] [ 0.122290] Initialise system trusted keyrings
[Raspberry Pi 3 B+] [ 0.122566] workingset: timestamp_bits=42 max_order=18 bucket_order=0
[Raspberry Pi 3 B+] [ 0.123142] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[Raspberry Pi 3 B+] [ 0.123558] NFS: Registering the id_resolver key type
[Raspberry Pi 3 B+] [ 0.123612] Key type id_resolver registered
[Raspberry Pi 3 B+] [ 0.123634] Key type id_legacy registered
[Raspberry Pi 3 B+] [ 0.123680] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Raspberry Pi 3 B+] [ 0.123709] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[Raspberry Pi 3 B+] [ 0.123957] fuse: init (API version 7.39)
[Raspberry Pi 3 B+] [ 0.124183] 9p: Installing v9fs 9p2000 file system support
[Raspberry Pi 3 B+] [ 0.208998] Key type asymmetric registered
[Raspberry Pi 3 B+] [ 0.209026] Asymmetric key parser 'x509' registered
[Raspberry Pi 3 B+] [ 0.209115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[Raspberry Pi 3 B+] [ 0.209148] io scheduler mq-deadline registered
[Raspberry Pi 3 B+] [ 0.209175] io scheduler kyber registered
[Raspberry Pi 3 B+] [ 0.209243] io scheduler bfq registered
[Raspberry Pi 3 B+] [ 0.233164] simple-framebuffer 3eaf0000.framebuffer: framebuffer at 0x3eaf0000, 0x10a800 bytes
[Raspberry Pi 3 B+] [ 0.233229] simple-framebuffer 3eaf0000.framebuffer: format=a8r8g8b8, mode=656x416x32, linelength=2624
[Raspberry Pi 3 B+] [ 0.236335] Console: switching to colour frame buffer device 82x26
[Raspberry Pi 3 B+] [ 0.239070] simple-framebuffer 3eaf0000.framebuffer: fb0: simplefb registered!
[Raspberry Pi 3 B+] [ 0.240760] IPMI message handler: version 39.2
[Raspberry Pi 3 B+] [ 0.242395] ipmi device interface
[Raspberry Pi 3 B+] [ 0.244223] ipmi_ssif: IPMI SSIF Interface driver
[Raspberry Pi 3 B+] [ 0.246279] EINJ: ACPI disabled.
[Raspberry Pi 3 B+] [ 0.298004] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[Raspberry Pi 3 B+] [ 0.302093] printk: legacy console [ttyS0] disabled
[Raspberry Pi 3 B+] [ 0.304272] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550
[Raspberry Pi 3 B+] [ 0.307381] printk: legacy console [ttyS0] enabled
[Raspberry Pi 3 B+] [ 1.375620] Serial: AMBA driver
[Raspberry Pi 3 B+] [ 1.381405] msm_serial: driver initialized
[Raspberry Pi 3 B+] [ 1.387658] SuperH (H)SCI(F) driver initialized
[Raspberry Pi 3 B+] [ 1.394031] STM32 USART driver initialized
[Raspberry Pi 3 B+] [ 1.401735] bcm2835-rng 3f104000.rng: hwrng registered
[Raspberry Pi 3 B+] [ 1.429820] loop: module loaded
[Raspberry Pi 3 B+] [ 1.437135] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[Raspberry Pi 3 B+] [ 1.447972] megasas: 07.727.03.00-rc1
[Raspberry Pi 3 B+] [ 1.457033] SPI driver spidev has no spi_device_id for brcm,bcm2835-spi
[Raspberry Pi 3 B+] [ 1.472778] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[Raspberry Pi 3 B+] [ 1.483714] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[Raspberry Pi 3 B+] [ 1.505832] tun: Universal TUN/TAP device driver, 1.6
[Raspberry Pi 3 B+] [ 1.515365] thunder_xcv, ver 1.0
[Raspberry Pi 3 B+] [ 1.520289] thunder_bgx, ver 1.0
[Raspberry Pi 3 B+] [ 1.525111] nicpf, ver 1.0
[Raspberry Pi 3 B+] [ 1.529354] nicvf, ver 1.0
[Raspberry Pi 3 B+] [ 1.533648] tulip: tulip: unknown CPU architecture, using default csr0
[Raspberry Pi 3 B+] [ 1.544170] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[Raspberry Pi 3 B+] [ 1.552957] hns3: Copyright (c) 2017 Huawei Corporation.
[Raspberry Pi 3 B+] [ 1.559907] hclge is initializing
[Raspberry Pi 3 B+] [ 1.564960] e100: Intel(R) PRO/100 Network Driver
[Raspberry Pi 3 B+] [ 1.571195] e100: Copyright(c) 1999-2006 Intel Corporation
[Raspberry Pi 3 B+] [ 1.578265] e1000: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B+] [ 1.584667] e1000: Copyright (c) 1999-2006 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.592023] e1000e: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B+] [ 1.598485] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.605953] igb: Intel(R) Gigabit Ethernet Network Driver
[Raspberry Pi 3 B+] [ 1.612828] igb: Copyright (c) 2007-2014 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.619920] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[Raspberry Pi 3 B+] [ 1.627642] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.635618] sky2: driver version 1.30
[Raspberry Pi 3 B+] [ 1.645059] usbcore: registered new device driver r8152-cfgselector
[Raspberry Pi 3 B+] [ 1.652794] usbcore: registered new interface driver r8152
[Raspberry Pi 3 B+] [ 1.659697] usbcore: registered new interface driver lan78xx
[Raspberry Pi 3 B+] [ 1.666767] usbcore: registered new interface driver asix
[Raspberry Pi 3 B+] [ 1.673546] usbcore: registered new interface driver ax88179_178a
[Raspberry Pi 3 B+] [ 1.681058] usbcore: registered new interface driver cdc_ether
[Raspberry Pi 3 B+] [ 1.688257] usbcore: registered new interface driver smsc95xx
[Raspberry Pi 3 B+] [ 1.695315] usbcore: registered new interface driver net1080
[Raspberry Pi 3 B+] [ 1.702208] usbcore: registered new interface driver cdc_subset
[Raspberry Pi 3 B+] [ 1.709337] usbcore: registered new interface driver zaurus
[Raspberry Pi 3 B+] [ 1.716095] usbcore: registered new interface driver cdc_ncm
[Raspberry Pi 3 B+] [ 1.722911] usbcore: registered new interface driver lg-vl600
[Raspberry Pi 3 B+] [ 1.729753] usbcore: registered new interface driver r8153_ecm
[Raspberry Pi 3 B+] [ 1.737168] VFIO - User Level meta-driver version: 0.3
[Raspberry Pi 3 B+] [ 1.748861] usbcore: registered new interface driver cdc_acm
[Raspberry Pi 3 B+] [ 1.755591] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[Raspberry Pi 3 B+] [ 1.765636] usbcore: registered new interface driver usblp
[Raspberry Pi 3 B+] [ 1.772245] usbcore: registered new interface driver usb-storage
[Raspberry Pi 3 B+] [ 1.779449] usbcore: registered new interface driver cp210x
[Raspberry Pi 3 B+] [ 1.786056] usbserial: USB Serial support registered for cp210x
[Raspberry Pi 3 B+] [ 1.793023] usbcore: registered new interface driver ftdi_sio
[Raspberry Pi 3 B+] [ 1.799808] usbserial: USB Serial support registered for FTDI USB Serial Device
[Raspberry Pi 3 B+] [ 1.814485] i2c_dev: i2c /dev entries driver
[Raspberry Pi 3 B+] [ 1.821981] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[Raspberry Pi 3 B+] [ 1.834969] Driver for 1-wire Dallas network protocol.
[Raspberry Pi 3 B+] [ 1.849501] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[Raspberry Pi 3 B+] [ 1.863189] sdhci: Secure Digital Host Controller Interface driver
[Raspberry Pi 3 B+] [ 1.870797] sdhci: Copyright(c) Pierre Ossman
[Raspberry Pi 3 B+] [ 1.877940] Synopsys Designware Multimedia Card Interface Driver
[Raspberry Pi 3 B+] [ 1.887311] sdhci-pltfm: SDHCI platform and OF driver helper
[Raspberry Pi 3 B+] [ 1.898942] ledtrig-cpu: registered to indicate activity on CPUs
[Raspberry Pi 3 B+] [ 1.911433] usbcore: registered new interface driver usbhid
[Raspberry Pi 3 B+] [ 1.918646] usbhid: USB HID core driver
[Raspberry Pi 3 B+] [ 1.926490] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Raspberry Pi 3 B+] [ 1.939321] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[Raspberry Pi 3 B+] [ 1.962167] Initializing XFRM netlink socket
[Raspberry Pi 3 B+] [ 1.968191] NET: Registered PF_INET6 protocol family
[Raspberry Pi 3 B+] [ 1.970892] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[Raspberry Pi 3 B+] [ 1.974444] Segment Routing with IPv6
[Raspberry Pi 3 B+] [ 1.987927] In-situ OAM (IOAM) with IPv6
[Raspberry Pi 3 B+] [ 1.993604] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[Raspberry Pi 3 B+] [ 2.001959] NET: Registered PF_PACKET protocol family
[Raspberry Pi 3 B+] [ 2.008742] 9pnet: Installing 9P2000 support
[Raspberry Pi 3 B+] [ 2.014641] Key type dns_resolver registered
[Raspberry Pi 3 B+] [ 2.045701] registered taskstats version 1
[Raspberry Pi 3 B+] [ 2.051818] Loading compiled-in X.509 certificates
[Raspberry Pi 3 B+] [ 2.082676] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[Raspberry Pi 3 B+] [ 2.095232] serial serial0: tty port ttyAMA0 registered
[Raspberry Pi 3 B+] [ 2.107072] mmc0: host does not support reading read-only switch, assuming write-enable
[Raspberry Pi 3 B+] [ 2.108445] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-29T12:26:47
[Raspberry Pi 3 B+] [ 2.123926] mmc0: new high speed SDHC card at address aaaa
[Raspberry Pi 3 B+] [ 2.138159] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Raspberry Pi 3 B+] [ 2.148968] Console: switching to colour dummy device 80x25
[Raspberry Pi 3 B+] [ 2.156847] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops)
[Raspberry Pi 3 B+] [ 2.166614] mmcblk0: p1 p2 p3 p4
[Raspberry Pi 3 B+] [ 2.167318] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops)
[Raspberry Pi 3 B+] [ 2.176467] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops)
[Raspberry Pi 3 B+] [ 2.182798] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops)
[Raspberry Pi 3 B+] [ 2.189064] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.196024] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.202984] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.209919] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops)
[Raspberry Pi 3 B+] [ 2.218195] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[Raspberry Pi 3 B+] [ 2.262380] Console: switching to colour frame buffer device 90x30
[Raspberry Pi 3 B+] [ 2.285980] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[Raspberry Pi 3 B+] [ 2.824923] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator
[Raspberry Pi 3 B+] [ 2.833402] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator
[Raspberry Pi 3 B+] [ 2.893543] dwc2 3f980000.usb: DWC OTG Controller
[Raspberry Pi 3 B+] [ 2.899777] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[Raspberry Pi 3 B+] [ 2.907969] dwc2 3f980000.usb: irq 51, io mem 0x3f980000
[Raspberry Pi 3 B+] [ 2.915493] hub 1-0:1.0: USB hub found
[Raspberry Pi 3 B+] [ 2.920569] hub 1-0:1.0: 1 port detected
[Raspberry Pi 3 B+] [ 2.942986] sdhci-iproc 3f300000.mmc: allocated mmc-pwrseq
[Raspberry Pi 3 B+] [ 2.960274] bcm2835-audio bcm2835-audio: card created with 8 channels
[Raspberry Pi 3 B+] [ 2.969810] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Raspberry Pi 3 B+] [ 2.981072] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[Raspberry Pi 3 B+] [ 2.989744] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Raspberry Pi 3 B+] [ 2.990311] mmc1: SDHCI controller on 3f300000.mmc [3f300000.mmc] using PIO
[Raspberry Pi 3 B+] [ 2.995580] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[Raspberry Pi 3 B+] [ 2.999005] clk: Disabling unused clocks
[Raspberry Pi 3 B+] [ 3.001086] ALSA device list:
[Raspberry Pi 3 B+] [ 3.001092] #0: vc4-hdmi
[Raspberry Pi 3 B+] [ 3.001096] #1: bcm2835 Headphones
[Raspberry Pi 3 B+] [ 3.030224] cfg80211: failed to load regulatory.db
[Raspberry Pi 3 B+] [ 3.042407] VFS: Mounted root (squashfs filesystem) readonly on device 179:3.
[Raspberry Pi 3 B+] [ 3.051092] devtmpfs: mounted
[Raspberry Pi 3 B+] [ 3.061368] Freeing unused kernel memory: 11072K
[Raspberry Pi 3 B+] [ 3.078948] Run /gokrazy/init as init process
[Raspberry Pi 3 B+] [ 3.094233] mmc1: new high speed SDIO card at address 0001
[Raspberry Pi 3 B+] [ 3.226894] usb 1-1: new high-speed USB device number 2 using dwc2
[Raspberry Pi 3 B+] [ 3.439743] hub 1-1:1.0: USB hub found
[Raspberry Pi 3 B+] [ 3.444736] hub 1-1:1.0: 4 ports detected
[Raspberry Pi 3 B+] gokrazy build timestamp 2024-03-02T03:43:25Z
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 gokrazy.go:7[ 3.457719] EXT4-fs (mmcblk0p4): bad geometry: block count 3606912 exceeds size of device (3606907 blocks)
[Raspberry Pi 3 B+] 6: found hardware watchdog "Broadcom BCM2835 Watchdog timer" with timeout 15s, p[ 3.474215] FAT-fs (mmcblk0p4): bogus number of reserved sectors
[Raspberry Pi 3 B+] inging...
[Raspberry Pi 3 B+] 1970/01/01 00[ 3.482527] FAT-fs (mmcblk0p4): Can't find a valid FAT filesystem
[Raspberry Pi 3 B+] :00:03 mount.go:112: Could not mount permanent storage partition /dev/mmcblk0p4 as ext4: invalid argument
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 mount.go:112: Could not mount permanent storage partition /dev/mmcblk0p4 as vfat: invalid argument
[Raspberry Pi 3 B+] hostname "bakeryplus"
[Raspberry Pi 3 B+] gokrazy device model Raspberry Pi 3 Model B Plus Rev 1.3
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 gokrazy.go:440: getting EEPROM version: RECOVERY.000 not found, assuming update unsuccessful
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 listeners.go:78: now listening on 127.0.0.1:80
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 listeners.go:78: now listening on [::1]:80
[Raspberry Pi 3 B+] [ 3.738938] usb 1-1.1: new high-speed USB device number 3 using dwc2
[Raspberry Pi 3 B+] [ 3.847888] hub 1-1.1:1.0: USB hub found
[Raspberry Pi 3 B+] [ 3.852794] hub 1-1.1:1.0: 3 ports detected
[Raspberry Pi 3 B+] 1970/01/01 00:00:04 randomd.go:83: seeding random pool failed: open /perm/random.seed: read-only file system
[Raspberry Pi 3 B+] [ 4.558917] usb 1-1.1.1: new high-speed USB device number 4 using dwc2
[Raspberry Pi 3 B+] timestamps: boot: 2024-03-02 03:43:28 +0000 UTC, root: 2024-03-02 03:43:28 +0000 UTC (boot=1709351008 root=1709351008)
[Raspberry Pi 3 B+] [ 4.933445] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[Raspberry Pi 3 B+] [ 5.532719] lan78xx 1-1.1.1:1.0 eth0: Link is Down
[Raspberry Pi 3 B+] [ 7.605796] lan78xx 1-1.1.1:1.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:78: now listening on 10.0.0.107:80
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe46:1240%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe46:1240%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B+] 2024/03/02 03:44:19 listeners.go:78: now listening on [fe80::ba27:ebff:fe46:1240%eth0]:80
[Raspberry Pi 3 B+] [ 9.561045] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[Raspberry Pi 3 B+] [ 9.571829] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[Raspberry Pi 3 B+] [ 9.814389] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[Raspberry Pi 3 B+] [ 9.823647] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
[Raspberry Pi 3 B+] 2024/03/02 03:44:25 listeners.go:78: now listening on [fe80::ba27:ebff:fe13:4715%wlan0]:80
[Raspberry Pi 3 B+] 2024/03/02 03:44:26 listeners.go:78: now listening on [fd7c:ae21:eb36:0:ba27:ebff:fe13:4715]:80
[Raspberry Pi 3 B+] 2024/03/02 03:44:40 listeners.go:78: now listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2024/03/02 03:44:41 listeners.go:114: no longer listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2024/03/02 03:44:41 listeners.go:106: serving on 192.168.1.212:80: http: Server closed
[Raspberry Pi 3 B+] 2024/03/02 03:44:59 listeners.go:78: now listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2024/03/02 03:45:00 listeners.go:114: no longer listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2024/03/02 03:45:00 listeners.go:106: serving on 192.168.1.212:80: http: Server closed
[Raspberry Pi 3 B+] [ 49.696852] bake: SUCCESS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment