FreeBSD 10.3 on Silicom SoNIC

FreeBSD 10.3 on Silicom SoNIC

http://www.silicom-usa.com/PE310G4DE488BS3_Quad_10GbE_Broadwell_DE_SoNIC_Network_Adapter_93

# dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 02:10:02 UTC 2016
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU D-1531 @ 2.20GHz (2194.97-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50663  Family=0x6  Model=0x56  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 10737418240 (10240 MB)
avail memory = 8219721728 (7838 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID:  8
 cpu9 (AP): APIC ID:  9
 cpu10 (AP): APIC ID: 10
 cpu11 (AP): APIC ID: 11
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc6500, 0) error 19
kbd0 at kbdmux0
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci6: <ACPI PCI bus> on pcib1
ixl0: <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.3> mem 0xfb800000-0xfbffffff,0xfd800000-0xfd807fff at device 0.0 on pci6
ixl0: Using MSIX interrupts with 13 vectors
ixl0: f4.33 a1.2 n04.42 e800018a7
ixl0: The driver for the device detected an older version of the NVM image than expected.
Please update the NVM image.
ixl0: Using defaults for TSO: 65518/35/2048
ixl0: Ethernet address: 00:08:a2:0b:21:d2
ixl0: PCI Express Bus: Speed 8.0GT/s Width x8
ixl1: <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.3> mem 0xfc000000-0xfc7fffff,0xfd808000-0xfd80ffff at device 0.1 on pci6
ixl1: Using MSIX interrupts with 13 vectors
ixl1: f4.33 a1.2 n04.42 e800018a7
ixl1: The driver for the device detected an older version of the NVM image than expected.
Please update the NVM image.
ixl1: Using defaults for TSO: 65518/35/2048
ixl1: Ethernet address: 00:08:a2:0b:21:d3
ixl1: PCI Express Bus: Speed 8.0GT/s Width x8
ixl2: <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.3> mem 0xfc800000-0xfcffffff,0xfd810000-0xfd817fff at device 0.2 on pci6
ixl2: Using MSIX interrupts with 13 vectors
ixl2: f4.33 a1.2 n04.42 e800018a7
ixl2: The driver for the device detected an older version of the NVM image than expected.
Please update the NVM image.
ixl2: Using defaults for TSO: 65518/35/2048
ixl2: Ethernet address: 00:08:a2:0b:21:d4
ixl2: PCI Express Bus: Speed 8.0GT/s Width x8
ixl3: <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.3> mem 0xfd000000-0xfd7fffff,0xfd818000-0xfd81ffff at device 0.3 on pci6
ixl3: Using MSIX interrupts with 13 vectors
ixl3: f4.33 a1.2 n04.42 e800018a7
ixl3: The driver for the device detected an older version of the NVM image than expected.
Please update the NVM image.
ixl3: Using defaults for TSO: 65518/35/2048
ixl3: Ethernet address: 00:08:a2:0b:21:d5
ixl3: PCI Express Bus: Speed 8.0GT/s Width x8
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci8: <ACPI PCI bus> on pcib3
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> mem 0xfda00000-0xfdbfffff,0xfde00000-0xfde03fff at device 0.0 on pci8
ix0: Using MSIX interrupts with 9 vectors
ix0: Ethernet address: 00:08:a2:0b:21:d8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> mem 0xfdc00000-0xfddfffff,0xfde04000-0xfde07fff at device 0.1 on pci8
ix1: Using MSIX interrupts with 9 vectors
ix1: Ethernet address: 00:08:a2:0b:21:d9
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci9: <ACPI PCI bus> on pcib4
pci9: <processor> at device 0.0 (no driver attached)
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfe600000-0xfe60ffff irq 19 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xfe617800-0xfe617bff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Lynx Point HDA Controller> mem 0xfe610000-0xfe613fff irq 22 at device 27.0 on pci0
pcib5: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci10: <PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1000-0x101f mem 0xfe500000-0xfe57ffff,0xfe580000-0xfe583fff irq 16 at device 0.0 on pci10
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:08:a2:0b:21:d1
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfe617c00-0xfe617fff irq 18 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0x2068-0x206f,0x2080-0x2083,0x2070-0x2077,0x2084-0x2087,0x2000-0x201f mem 0xfe617000-0xfe6177ff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib6: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xc1000-0xc1fff,0xc2000-0xc2fff on isa0
ppc0: cannot reserve I/O port range
uart0: <16550 compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic10: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic11: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic9: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
Timecounter "TSC-low" frequency 1097483672 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
ugen0.2: <Generic> at usbus0
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.04, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:7:0:-1: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
da0: Serial Number E3BB2B34
da0: 40.000MB/s transfers
da0: 1008MB (2065408 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
GEOM: da0: the secondary GPT header is not in the last LBA.
GEOM: diskid/DISK-E3BB2B34: the secondary GPT header is not in the last LBA.
uhub3: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Invalid time in real time clock.
Check and reset the date immediately!
GEOM: diskid/DISK-E3BB2B34: the secondary GPT header is not in the last LBA.
#