Created
July 27, 2016 05:28
-
-
Save gonzopancho/b71be467f45594822131f4816d6cb718 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2016 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 11.0-BETA2 #0 r303168: Fri Jul 22 02:23:56 UTC 2016 | |
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 | |
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) | |
VT(efifb): resolution 2048x1200 | |
CPU: Intel(R) Core(TM) i7-6770HQ CPU @ 2.60GHz (2592.12-MHz K8-class CPU) | |
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 | |
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> | |
AMD Features2=0x121<LAHF,ABM,Prefetch> | |
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> | |
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> | |
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID | |
TSC: P-state invariant, performance statistics | |
real memory = 34359738368 (32768 MB) | |
avail memory = 33111113728 (31577 MB) | |
Event timer "LAPIC" quality 600 | |
ACPI APIC Table: <INTEL NUC6i7KY> | |
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs | |
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads | |
random: unblocking device. | |
ioapic0 <Version 2.0> irqs 0-119 on motherboard | |
random: entropy device external interface | |
kbd1 at kbdmux0 | |
netmap: loaded module | |
module_register_init: MOD_LOAD (vesa, 0xffffffff81018940, 0) error 19 | |
random: registering fast source Intel Secure Key RNG | |
random: fast provider: "Intel Secure Key RNG" | |
cryptosoft0: <software crypto> on motherboard | |
acpi0: <INTEL> on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
cpu4: <ACPI CPU> on acpi0 | |
cpu5: <ACPI CPU> on acpi0 | |
cpu6: <ACPI CPU> on acpi0 | |
cpu7: <ACPI CPU> on acpi0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 24000000 Hz quality 950 | |
Event timer "HPET" frequency 24000000 Hz quality 550 | |
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 | |
atrtc0: Warning: Couldn't map I/O. | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pcib0: _OSC returned error 0x4 | |
pci0: <ACPI PCI bus> on pcib0 | |
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 | |
vgapci0: Boot video device | |
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdc230000-0xdc23ffff irq 16 at device 20.0 on pci0 | |
xhci0: 32 bytes context size, 64-bit DMA | |
usbus0 on xhci0 | |
pci0: <simple comms> at device 22.0 (no driver attached) | |
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdc248000-0xdc249fff,0xdc24c000-0xdc24c0ff,0xdc24b000-0xdc24b7ff irq 16 at device 23.0 on pci0 | |
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
ahciem0: <AHCI enclosure management bridge> on ahci0 | |
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 | |
pcib1: [GIANT-LOCKED] | |
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 | |
pci1: <ACPI PCI bus> on pcib2 | |
sdhci_pci0: <Generic SD HCI> mem 0xdc101000-0xdc101fff,0xdc100000-0xdc1007ff irq 17 at device 0.0 on pci1 | |
sdhci_pci0: 1 slot(s) allocated | |
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 | |
pci2: <ACPI PCI bus> on pcib3 | |
pci2: <network> at device 0.0 (no driver attached) | |
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 | |
pcib4: [GIANT-LOCKED] | |
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
isa0: <ISA bus> on isab0 | |
pci0: <memory> at device 31.2 (no driver attached) | |
hdac0: <Intel Sunrise Point HDA Controller> mem 0xdc240000-0xdc243fff,0xdc220000-0xdc22ffff irq 16 at device 31.3 on pci0 | |
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdc200000-0xdc21ffff irq 16 at device 31.6 on pci0 | |
em0: Using an MSI interrupt | |
em0: Ethernet address: 00:1f:c6:9b:cb:9c | |
em0: netmap queues/slots: TX 1/1024, RX 1/1024 | |
acpi_button0: <Sleep Button> on acpi0 | |
acpi_button1: <Power Button> on acpi0 | |
acpi_tz0: <Thermal Zone> on acpi0 | |
acpi_tz1: <Thermal Zone> on acpi0 | |
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0 | |
ppc0: cannot reserve I/O port range | |
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 | |
est0: <Enhanced SpeedStep Frequency Control> on cpu0 | |
est1: <Enhanced SpeedStep Frequency Control> on cpu1 | |
est2: <Enhanced SpeedStep Frequency Control> on cpu2 | |
est3: <Enhanced SpeedStep Frequency Control> on cpu3 | |
est4: <Enhanced SpeedStep Frequency Control> on cpu4 | |
est5: <Enhanced SpeedStep Frequency Control> on cpu5 | |
est6: <Enhanced SpeedStep Frequency Control> on cpu6 | |
est7: <Enhanced SpeedStep Frequency Control> on cpu7 | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
ZFS filesystem version: 5 | |
ZFS storage pool version: features support (5000) | |
Timecounters tick every 1.000 msec | |
nvme cam probe device init | |
hdacc0: <Realtek (0x0233) HDA CODEC> at cad 0 on hdac0 | |
hdaa0: <Realtek (0x0233) Audio Function Group> at nid 1 on hdacc0 | |
pcm0: <Realtek (0x0233) (Rear Analog Speaker)> at nid 27 on hdaa0 | |
pcm1: <Realtek (0x0233) (Front Analog Headphones)> at nid 33 on hdaa0 | |
pcm2: <Realtek (0x0233) (Rear Digital)> at nid 30 on hdaa0 | |
hdacc1: <Intel (0x2809) HDA CODEC> at cad 2 on hdac0 | |
hdaa1: <Intel (0x2809) Audio Function Group> at nid 1 on hdacc1 | |
pcm3: <Intel (0x2809) (HDMI/DP 8ch)> at nid 3 on hdaa1 | |
ugen0.1: <0x8086> at usbus0 | |
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 | |
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device | |
ses0: SEMB SES Device | |
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
ada0: <CHA-M2B8-M032 20151120> ACS-2 ATA SATA 3.x device | |
ada0: Serial Number 986062900015 | |
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) | |
ada0: Command Queueing enabled | |
ada0: 30208MB (61865984 512 byte sectors) | |
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0 | |
ada1: <CHA-M2B8-M032 20151120> ACS-2 ATA SATA 3.x device | |
ada1: Serial Number 986062900018 | |
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) | |
ada1: Command Queueing enabled | |
ada1: 30208MB (61865984 512 byte sectors) | |
SMP: AP CPU #1 Launched! | |
SMP: AP CPU #2 Launched! | |
SMP: AP CPU #6 Launched! | |
SMP: AP CPU #3 Launched! | |
SMP: AP CPU #5 Launched! | |
SMP: AP CPU #7 Launched! | |
SMP: AP CPU #4 Launched! | |
Timecounter "TSC-low" frequency 1296059493 Hz quality 1000 | |
Trying to mount root from zfs:zroot/ROOT/default []... | |
Root mount waiting for: usbus0 | |
uhub0: 24 ports with 24 removable, self powered | |
Root mount waiting for: usbus0 | |
ugen0.2: <Logitech> at usbus0 | |
Root mount waiting for: usbus0 | |
Root mount waiting for: usbus0 | |
usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) | |
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT | |
Root mount waiting for: usbus0 | |
Root mount waiting for: usbus0 | |
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) | |
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT | |
Root mount waiting for: usbus0 | |
Root mount waiting for: usbus0 | |
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) | |
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT | |
Root mount waiting for: usbus0 | |
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) | |
Root mount waiting for: usbus0 | |
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT | |
Root mount waiting for: usbus0 | |
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) | |
Root mount waiting for: usbus0 | |
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT | |
ugen0.3: <Unknown> at usbus0 (disconnected) | |
uhub_reattach_port: could not allocate new device | |
ugen0.3: <Unicomp Inc> at usbus0 | |
ukbd0: <Keyboard Interface> on usbus0 | |
kbd2 at ukbd0 | |
em0: link state changed to UP | |
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 1> on usbus0 | |
ums0: 3 buttons and [XYZ] coordinates ID=0 | |
uhid0: <CDC Ifc> on usbus0 | |
info: [drm] Initialized drm 1.1.0 20060810 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment