Skip to content

Instantly share code, notes, and snippets.

@grahamperrin

grahamperrin/HGST_HTS725050A7E630_TF0500Y906L81L_2019-08-15.txt

Created August 15, 2019 10:26
Show Gist options
  • Save grahamperrin/e624d443d3f10c7162ac7986f599fbd6 to your computer and use it in GitHub Desktop.
Save grahamperrin/e624d443d3f10c7162ac7986f599fbd6 to your computer and use it in GitHub Desktop.
Download ZIP
GSmartControl report with three raw values (two in parentheses) for Reallocated_Sector_Ct
Raw
HGST_HTS725050A7E630_TF0500Y906L81L_2019-08-15.txt
smartctl 7.0 2018-12-30 r4883 [FreeBSD 13.0-CURRENT amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z7K500
Device Model: HGST HTS725050A7E630
Serial Number: TF0500Y906L81L
LU WWN Device Id: 5 000cca 76cc2fec5
Firmware Version: GH2OA440
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 15 10:45:47 2019 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0
2 Throughput_Performance P-S--K 100 100 040 - 0
3 Spin_Up_Time PO---K 235 100 033 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 1804
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 24 (0 3)
7 Seek_Error_Rate POSR-K 100 100 067 - 0
8 Seek_Time_Performance P-S--K 100 100 040 - 0
9 Power_On_Hours -O--CK 082 082 000 - 8196
10 Spin_Retry_Count PO--CK 100 100 060 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1795
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 274880266240
188 Command_Timeout -O--CK 100 100 000 - 1507328
190 Airflow_Temperature_Cel -O---K 062 051 045 - 38 (Min/Max 33/42)
191 G-Sense_Error_Rate -O--CK 098 098 000 - 657
192 Power-Off_Retract_Count -O--CK 100 100 000 - 6029404
193 Load_Cycle_Count -O--CK 075 075 000 - 252242
196 Reallocated_Event_Count -O--CK 100 100 000 - 3
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0
223 Load_Retry_Count -O-R-K 100 084 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8196 -
# 2 Extended offline Completed without error 00% 5144 -
# 3 Short offline Completed without error 00% 3512 -
# 4 Short offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 33/42 Celsius
Lifetime Min/Max Temperature: 10/49 Celsius
Specified Max Operating Temperature: 32 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (83)
Index Estimated Time Temperature Celsius
84 2019-08-15 08:38 37 ******************
... ..( 11 skipped). .. ******************
96 2019-08-15 08:50 37 ******************
97 2019-08-15 08:51 38 *******************
... ..( 28 skipped). .. *******************
126 2019-08-15 09:20 38 *******************
127 2019-08-15 09:21 37 ******************
0 2019-08-15 09:22 37 ******************
1 2019-08-15 09:23 37 ******************
2 2019-08-15 09:24 36 *****************
3 2019-08-15 09:25 36 *****************
4 2019-08-15 09:26 36 *****************
5 2019-08-15 09:27 35 ****************
... ..( 9 skipped). .. ****************
15 2019-08-15 09:37 35 ****************
16 2019-08-15 09:38 34 ***************
... ..( 5 skipped). .. ***************
22 2019-08-15 09:44 34 ***************
23 2019-08-15 09:45 33 **************
24 2019-08-15 09:46 34 ***************
25 2019-08-15 09:47 33 **************
... ..( 24 skipped). .. **************
50 2019-08-15 10:12 33 **************
51 2019-08-15 10:13 34 ***************
52 2019-08-15 10:14 34 ***************
53 2019-08-15 10:15 34 ***************
54 2019-08-15 10:16 35 ****************
55 2019-08-15 10:17 35 ****************
56 2019-08-15 10:18 35 ****************
57 2019-08-15 10:19 36 *****************
58 2019-08-15 10:20 36 *****************
59 2019-08-15 10:21 36 *****************
60 2019-08-15 10:22 37 ******************
61 2019-08-15 10:23 37 ******************
62 2019-08-15 10:24 37 ******************
63 2019-08-15 10:25 36 *****************
64 2019-08-15 10:26 36 *****************
65 2019-08-15 10:27 37 ******************
... ..( 6 skipped). .. ******************
72 2019-08-15 10:34 37 ******************
73 2019-08-15 10:35 36 *****************
... ..( 2 skipped). .. *****************
76 2019-08-15 10:38 36 *****************
77 2019-08-15 10:39 37 ******************
... ..( 4 skipped). .. ******************
82 2019-08-15 10:44 37 ******************
83 2019-08-15 10:45 38 *******************
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment