Created
January 16, 2015 06:50
-
-
Save graugans/19db9ff7d6d99fdf49e1 to your computer and use it in GitHub Desktop.
Amlogic Kernel config for wetek.play yocto project
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # Automatically generated file; DO NOT EDIT. | |
| # Linux/arm 3.10.61 Kernel Configuration | |
| # | |
| CONFIG_ARM=y | |
| CONFIG_SYS_SUPPORTS_APM_EMULATION=y | |
| CONFIG_HAVE_PROC_CPU=y | |
| CONFIG_STACKTRACE_SUPPORT=y | |
| CONFIG_LOCKDEP_SUPPORT=y | |
| CONFIG_TRACE_IRQFLAGS_SUPPORT=y | |
| CONFIG_RWSEM_GENERIC_SPINLOCK=y | |
| CONFIG_ARCH_HAS_CPUFREQ=y | |
| CONFIG_GENERIC_HWEIGHT=y | |
| CONFIG_GENERIC_CALIBRATE_DELAY=y | |
| CONFIG_NEED_DMA_MAP_STATE=y | |
| CONFIG_FIQ=y | |
| CONFIG_VECTORS_BASE=0xffff0000 | |
| # CONFIG_ARM_PATCH_PHYS_VIRT is not set | |
| CONFIG_NEED_MACH_MEMORY_H=y | |
| CONFIG_GENERIC_BUG=y | |
| CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | |
| CONFIG_IRQ_WORK=y | |
| CONFIG_BUILDTIME_EXTABLE_SORT=y | |
| # | |
| # General setup | |
| # | |
| CONFIG_INIT_ENV_ARG_LIMIT=32 | |
| CONFIG_CROSS_COMPILE="" | |
| CONFIG_LOCALVERSION="" | |
| # CONFIG_LOCALVERSION_AUTO is not set | |
| CONFIG_HAVE_KERNEL_GZIP=y | |
| CONFIG_HAVE_KERNEL_LZMA=y | |
| CONFIG_HAVE_KERNEL_XZ=y | |
| CONFIG_HAVE_KERNEL_LZO=y | |
| # CONFIG_KERNEL_GZIP is not set | |
| CONFIG_KERNEL_LZMA=y | |
| # CONFIG_KERNEL_XZ is not set | |
| # CONFIG_KERNEL_LZO is not set | |
| CONFIG_DEFAULT_HOSTNAME="openelec" | |
| # CONFIG_SWAP is not set | |
| CONFIG_SYSVIPC=y | |
| CONFIG_SYSVIPC_SYSCTL=y | |
| # CONFIG_POSIX_MQUEUE is not set | |
| # CONFIG_FHANDLE is not set | |
| # CONFIG_AUDIT is not set | |
| CONFIG_HAVE_GENERIC_HARDIRQS=y | |
| # | |
| # IRQ subsystem | |
| # | |
| CONFIG_GENERIC_HARDIRQS=y | |
| CONFIG_GENERIC_IRQ_PROBE=y | |
| CONFIG_GENERIC_IRQ_SHOW=y | |
| CONFIG_HARDIRQS_SW_RESEND=y | |
| CONFIG_IRQ_DOMAIN=y | |
| # CONFIG_IRQ_DOMAIN_DEBUG is not set | |
| CONFIG_KTIME_SCALAR=y | |
| CONFIG_GENERIC_CLOCKEVENTS=y | |
| CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | |
| CONFIG_ARCH_HAS_TICK_BROADCAST=y | |
| CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y | |
| # | |
| # Timers subsystem | |
| # | |
| CONFIG_TICK_ONESHOT=y | |
| CONFIG_NO_HZ_COMMON=y | |
| # CONFIG_HZ_PERIODIC is not set | |
| CONFIG_NO_HZ_IDLE=y | |
| CONFIG_NO_HZ=y | |
| CONFIG_HIGH_RES_TIMERS=y | |
| # | |
| # CPU/Task time and stats accounting | |
| # | |
| CONFIG_TICK_CPU_ACCOUNTING=y | |
| # CONFIG_IRQ_TIME_ACCOUNTING is not set | |
| CONFIG_BSD_PROCESS_ACCT=y | |
| # CONFIG_BSD_PROCESS_ACCT_V3 is not set | |
| # CONFIG_TASKSTATS is not set | |
| # | |
| # RCU Subsystem | |
| # | |
| CONFIG_TREE_PREEMPT_RCU=y | |
| CONFIG_PREEMPT_RCU=y | |
| CONFIG_RCU_STALL_COMMON=y | |
| # CONFIG_RCU_USER_QS is not set | |
| CONFIG_RCU_FANOUT=32 | |
| CONFIG_RCU_FANOUT_LEAF=16 | |
| # CONFIG_RCU_FANOUT_EXACT is not set | |
| # CONFIG_RCU_FAST_NO_HZ is not set | |
| CONFIG_TREE_RCU_TRACE=y | |
| # CONFIG_RCU_BOOST is not set | |
| # CONFIG_RCU_NOCB_CPU is not set | |
| CONFIG_IKCONFIG=y | |
| CONFIG_IKCONFIG_PROC=y | |
| CONFIG_LOG_BUF_SHIFT=17 | |
| CONFIG_CGROUPS=y | |
| # CONFIG_CGROUP_DEBUG is not set | |
| CONFIG_CGROUP_FREEZER=y | |
| # CONFIG_CGROUP_DEVICE is not set | |
| # CONFIG_CPUSETS is not set | |
| CONFIG_CGROUP_CPUACCT=y | |
| CONFIG_RESOURCE_COUNTERS=y | |
| # CONFIG_MEMCG is not set | |
| CONFIG_CGROUP_SCHED=y | |
| # CONFIG_FAIR_GROUP_SCHED is not set | |
| CONFIG_RT_GROUP_SCHED=y | |
| # CONFIG_BLK_CGROUP is not set | |
| # CONFIG_CHECKPOINT_RESTORE is not set | |
| # CONFIG_NAMESPACES is not set | |
| CONFIG_UIDGID_CONVERTED=y | |
| # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set | |
| # CONFIG_SCHED_AUTOGROUP is not set | |
| # CONFIG_SYSFS_DEPRECATED is not set | |
| # CONFIG_RELAY is not set | |
| CONFIG_BLK_DEV_INITRD=y | |
| CONFIG_INITRAMFS_SOURCE=" " | |
| CONFIG_INITRAMFS_ROOT_UID=0 | |
| CONFIG_INITRAMFS_ROOT_GID=0 | |
| CONFIG_RD_GZIP=y | |
| # CONFIG_RD_BZIP2 is not set | |
| # CONFIG_RD_LZMA is not set | |
| # CONFIG_RD_XZ is not set | |
| # CONFIG_RD_LZO is not set | |
| CONFIG_INITRAMFS_COMPRESSION_NONE=y | |
| # CONFIG_INITRAMFS_COMPRESSION_GZIP is not set | |
| # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set | |
| CONFIG_SYSCTL=y | |
| CONFIG_ANON_INODES=y | |
| CONFIG_HAVE_UID16=y | |
| CONFIG_HOTPLUG=y | |
| CONFIG_PANIC_TIMEOUT=0 | |
| CONFIG_EXPERT=y | |
| CONFIG_UID16=y | |
| CONFIG_SYSCTL_SYSCALL=y | |
| CONFIG_KALLSYMS=y | |
| # CONFIG_KALLSYMS_ALL is not set | |
| CONFIG_PRINTK=y | |
| CONFIG_BUG=y | |
| CONFIG_ELF_CORE=y | |
| CONFIG_BASE_FULL=y | |
| CONFIG_FUTEX=y | |
| CONFIG_EPOLL=y | |
| CONFIG_SIGNALFD=y | |
| CONFIG_TIMERFD=y | |
| CONFIG_EVENTFD=y | |
| CONFIG_SHMEM=y | |
| # CONFIG_AIO is not set | |
| CONFIG_EMBEDDED=y | |
| CONFIG_HAVE_PERF_EVENTS=y | |
| CONFIG_PERF_USE_VMALLOC=y | |
| # | |
| # Kernel Performance Events And Counters | |
| # | |
| # CONFIG_PERF_EVENTS is not set | |
| # CONFIG_VM_EVENT_COUNTERS is not set | |
| CONFIG_SLUB_DEBUG=y | |
| CONFIG_COMPAT_BRK=y | |
| # CONFIG_SLAB is not set | |
| CONFIG_SLUB=y | |
| # CONFIG_SLOB is not set | |
| # CONFIG_PROFILING is not set | |
| CONFIG_HAVE_OPROFILE=y | |
| # CONFIG_KPROBES is not set | |
| # CONFIG_JUMP_LABEL is not set | |
| # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set | |
| CONFIG_HAVE_KPROBES=y | |
| CONFIG_HAVE_KRETPROBES=y | |
| CONFIG_HAVE_ARCH_TRACEHOOK=y | |
| CONFIG_HAVE_DMA_ATTRS=y | |
| CONFIG_HAVE_DMA_CONTIGUOUS=y | |
| CONFIG_USE_GENERIC_SMP_HELPERS=y | |
| CONFIG_GENERIC_SMP_IDLE_THREAD=y | |
| CONFIG_GENERIC_IDLE_POLL_SETUP=y | |
| CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y | |
| CONFIG_HAVE_CLK=y | |
| CONFIG_HAVE_DMA_API_DEBUG=y | |
| CONFIG_HAVE_ARCH_JUMP_LABEL=y | |
| CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y | |
| CONFIG_HAVE_ARCH_SECCOMP_FILTER=y | |
| CONFIG_HAVE_CONTEXT_TRACKING=y | |
| CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y | |
| CONFIG_HAVE_MOD_ARCH_SPECIFIC=y | |
| CONFIG_MODULES_USE_ELF_REL=y | |
| CONFIG_CLONE_BACKWARDS=y | |
| CONFIG_OLD_SIGSUSPEND3=y | |
| CONFIG_OLD_SIGACTION=y | |
| # | |
| # GCOV-based kernel profiling | |
| # | |
| # CONFIG_GCOV_KERNEL is not set | |
| CONFIG_HAVE_GENERIC_DMA_COHERENT=y | |
| CONFIG_SLABINFO=y | |
| CONFIG_RT_MUTEXES=y | |
| CONFIG_BASE_SMALL=0 | |
| CONFIG_MODULES=y | |
| # CONFIG_MODULE_FORCE_LOAD is not set | |
| CONFIG_MODULE_UNLOAD=y | |
| # CONFIG_MODULE_FORCE_UNLOAD is not set | |
| # CONFIG_MODVERSIONS is not set | |
| # CONFIG_MODULE_SRCVERSION_ALL is not set | |
| # CONFIG_MODULE_SIG is not set | |
| CONFIG_STOP_MACHINE=y | |
| CONFIG_BLOCK=y | |
| CONFIG_LBDAF=y | |
| # CONFIG_BLK_DEV_BSG is not set | |
| # CONFIG_BLK_DEV_BSGLIB is not set | |
| CONFIG_BLK_DEV_INTEGRITY=y | |
| # | |
| # Partition Types | |
| # | |
| CONFIG_PARTITION_ADVANCED=y | |
| # CONFIG_ACORN_PARTITION is not set | |
| # CONFIG_OSF_PARTITION is not set | |
| # CONFIG_AMIGA_PARTITION is not set | |
| # CONFIG_ATARI_PARTITION is not set | |
| CONFIG_MAC_PARTITION=y | |
| CONFIG_MSDOS_PARTITION=y | |
| # CONFIG_BSD_DISKLABEL is not set | |
| # CONFIG_MINIX_SUBPARTITION is not set | |
| # CONFIG_SOLARIS_X86_PARTITION is not set | |
| # CONFIG_UNIXWARE_DISKLABEL is not set | |
| CONFIG_LDM_PARTITION=y | |
| # CONFIG_LDM_DEBUG is not set | |
| # CONFIG_SGI_PARTITION is not set | |
| # CONFIG_ULTRIX_PARTITION is not set | |
| # CONFIG_SUN_PARTITION is not set | |
| # CONFIG_KARMA_PARTITION is not set | |
| CONFIG_EFI_PARTITION=y | |
| # CONFIG_SYSV68_PARTITION is not set | |
| # | |
| # IO Schedulers | |
| # | |
| CONFIG_IOSCHED_NOOP=y | |
| CONFIG_IOSCHED_DEADLINE=y | |
| # CONFIG_IOSCHED_CFQ is not set | |
| CONFIG_DEFAULT_DEADLINE=y | |
| # CONFIG_DEFAULT_NOOP is not set | |
| CONFIG_DEFAULT_IOSCHED="deadline" | |
| CONFIG_UNINLINE_SPIN_UNLOCK=y | |
| CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y | |
| CONFIG_MUTEX_SPIN_ON_OWNER=y | |
| CONFIG_FREEZER=y | |
| # | |
| # System Type | |
| # | |
| CONFIG_MMU=y | |
| # CONFIG_ARCH_MULTIPLATFORM is not set | |
| # CONFIG_ARCH_INTEGRATOR is not set | |
| # CONFIG_ARCH_REALVIEW is not set | |
| # CONFIG_ARCH_VERSATILE is not set | |
| # CONFIG_ARCH_AT91 is not set | |
| # CONFIG_ARCH_CLPS711X is not set | |
| # CONFIG_ARCH_GEMINI is not set | |
| # CONFIG_ARCH_EBSA110 is not set | |
| # CONFIG_ARCH_EP93XX is not set | |
| # CONFIG_ARCH_FOOTBRIDGE is not set | |
| # CONFIG_ARCH_NETX is not set | |
| # CONFIG_ARCH_IOP13XX is not set | |
| # CONFIG_ARCH_IOP32X is not set | |
| # CONFIG_ARCH_IOP33X is not set | |
| # CONFIG_ARCH_IXP4XX is not set | |
| # CONFIG_ARCH_DOVE is not set | |
| # CONFIG_ARCH_KIRKWOOD is not set | |
| # CONFIG_ARCH_MV78XX0 is not set | |
| # CONFIG_ARCH_ORION5X is not set | |
| # CONFIG_ARCH_MMP is not set | |
| # CONFIG_ARCH_KS8695 is not set | |
| # CONFIG_ARCH_W90X900 is not set | |
| # CONFIG_ARCH_LPC32XX is not set | |
| # CONFIG_ARCH_PXA is not set | |
| CONFIG_PLAT_MESON=y | |
| # CONFIG_ARCH_MSM is not set | |
| # CONFIG_ARCH_SHMOBILE is not set | |
| # CONFIG_ARCH_RPC is not set | |
| # CONFIG_ARCH_SA1100 is not set | |
| # CONFIG_ARCH_S3C24XX is not set | |
| # CONFIG_ARCH_S3C64XX is not set | |
| # CONFIG_ARCH_S5P64X0 is not set | |
| # CONFIG_ARCH_S5PC100 is not set | |
| # CONFIG_ARCH_S5PV210 is not set | |
| # CONFIG_ARCH_EXYNOS is not set | |
| # CONFIG_ARCH_SHARK is not set | |
| # CONFIG_ARCH_U300 is not set | |
| # CONFIG_ARCH_DAVINCI is not set | |
| # CONFIG_ARCH_OMAP1 is not set | |
| # | |
| # Amlogic Meson platform | |
| # | |
| CONFIG_ARCH_MESON6=y | |
| # CONFIG_ARCH_MESON6TV is not set | |
| # CONFIG_ARCH_MESON6TVD is not set | |
| # CONFIG_ARCH_MESON8 is not set | |
| # CONFIG_ARCH_MESON8B is not set | |
| # CONFIG_ARCH_MESON8M2 is not set | |
| # CONFIG_ARCH_MESONG9TV is not set | |
| # | |
| # Meson development boards | |
| # | |
| CONFIG_MACH_MESON6_COMMON_BOARD=y | |
| # CONFIG_MESON_IRQ is not set | |
| CONFIG_MESON_ARM_GIC=y | |
| CONFIG_MESON_CLOCK_TICK_RATE=25000000 | |
| # CONFIG_MESON_ARM_GIC_FIQ is not set | |
| CONFIG_MESON_SUSPEND=y | |
| # CONFIG_SUSPEND_WATCHDOG is not set | |
| # CONFIG_MESON_SUSPEND_TEST is not set | |
| # CONFIG_SCREEN_ON_EARLY is not set | |
| # CONFIG_CLK81_DFS is not set | |
| CONFIG_MESON_LEGACY_REGISTER_API=y | |
| # CONFIG_MESON_CPU_EMULATOR is not set | |
| CONFIG_CLKTREE_DEBUG=y | |
| # | |
| # Meson Global Timer Setting | |
| # | |
| CONFIG_MESON_TIMERA=y | |
| # CONFIG_MESON_TIMERC is not set | |
| CONFIG_MESON_LOCAL_TIMER=y | |
| # CONFIG_MESON_ARM_TWD is not set | |
| CONFIG_MESON_CPU_TEMP_SENSOR=y | |
| # CONFIG_CORE_FREQ_TRACK is not set | |
| CONFIG_MESON6_SMP_HOTPLUG=y | |
| # CONFIG_SUPPORT_USB_BURNING is not set | |
| CONFIG_MESON_L2CC_OPTIMIZE=y | |
| # CONFIG_MESON_L2CC_DLF is not set | |
| # CONFIG_MESON_L2CC_STANDBY is not set | |
| CONFIG_MESON_SUSPEND_FIRMWARE_BASE=0x1ff00000 | |
| # CONFIG_MESON_TRUSTZONE is not set | |
| CONFIG_MESON_CUSTOM_BOARD_SUPPORT=y | |
| # | |
| # Meson customer board drivers | |
| # | |
| # CONFIG_GPIO_PCA953X is not set | |
| # CONFIG_KEYBOARD_GPIO_POLLED is not set | |
| # CONFIG_PLAT_SPEAR is not set | |
| # | |
| # Processor Type | |
| # | |
| CONFIG_CPU_V7=y | |
| CONFIG_CPU_32v6K=y | |
| CONFIG_CPU_32v7=y | |
| CONFIG_CPU_ABRT_EV7=y | |
| CONFIG_CPU_PABRT_V7=y | |
| CONFIG_CPU_CACHE_V7=y | |
| CONFIG_CPU_CACHE_VIPT=y | |
| CONFIG_CPU_COPY_V6=y | |
| CONFIG_CPU_TLB_V7=y | |
| CONFIG_CPU_HAS_ASID=y | |
| CONFIG_CPU_CP15=y | |
| CONFIG_CPU_CP15_MMU=y | |
| # | |
| # Processor Features | |
| # | |
| # CONFIG_ARM_LPAE is not set | |
| # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set | |
| CONFIG_ARM_THUMB=y | |
| # CONFIG_ARM_THUMBEE is not set | |
| CONFIG_ARM_VIRT_EXT=y | |
| CONFIG_SWP_EMULATE=y | |
| # CONFIG_CPU_ICACHE_DISABLE is not set | |
| # CONFIG_CPU_DCACHE_DISABLE is not set | |
| # CONFIG_CPU_BPREDICT_DISABLE is not set | |
| CONFIG_KUSER_HELPERS=y | |
| CONFIG_OUTER_CACHE=y | |
| CONFIG_OUTER_CACHE_SYNC=y | |
| CONFIG_MIGHT_HAVE_CACHE_L2X0=y | |
| CONFIG_CACHE_L2X0=y | |
| CONFIG_CACHE_PL310=y | |
| CONFIG_ARM_L1_CACHE_SHIFT_6=y | |
| CONFIG_ARM_L1_CACHE_SHIFT=6 | |
| CONFIG_ARM_DMA_MEM_BUFFERABLE=y | |
| CONFIG_ARM_NR_BANKS=8 | |
| CONFIG_MULTI_IRQ_HANDLER=y | |
| # CONFIG_ARM_ERRATA_430973 is not set | |
| # CONFIG_ARM_ERRATA_458693 is not set | |
| # CONFIG_ARM_ERRATA_460075 is not set | |
| # CONFIG_ARM_ERRATA_742230 is not set | |
| # CONFIG_ARM_ERRATA_742231 is not set | |
| # CONFIG_PL310_ERRATA_588369 is not set | |
| # CONFIG_ARM_ERRATA_643719 is not set | |
| # CONFIG_ARM_ERRATA_720789 is not set | |
| # CONFIG_PL310_ERRATA_727915 is not set | |
| # CONFIG_ARM_ERRATA_743622 is not set | |
| CONFIG_ARM_ERRATA_751472=y | |
| # CONFIG_PL310_ERRATA_753970 is not set | |
| CONFIG_ARM_ERRATA_754322=y | |
| # CONFIG_ARM_ERRATA_754327 is not set | |
| CONFIG_ARM_ERRATA_764369=y | |
| # CONFIG_PL310_ERRATA_769419 is not set | |
| # CONFIG_ARM_ERRATA_775420 is not set | |
| # CONFIG_ARM_ERRATA_798181 is not set | |
| # CONFIG_FIQ_DEBUGGER is not set | |
| # | |
| # Bus support | |
| # | |
| # CONFIG_PCI_SYSCALL is not set | |
| # CONFIG_PCCARD is not set | |
| # | |
| # Kernel Features | |
| # | |
| CONFIG_HAVE_SMP=y | |
| CONFIG_SMP=y | |
| CONFIG_SMP_ON_UP=y | |
| CONFIG_ARM_CPU_TOPOLOGY=y | |
| # CONFIG_SCHED_MC is not set | |
| # CONFIG_SCHED_SMT is not set | |
| CONFIG_HAVE_ARM_SCU=y | |
| # CONFIG_HAVE_ARM_ARCH_TIMER is not set | |
| # CONFIG_MCPM is not set | |
| CONFIG_VMSPLIT_3G=y | |
| # CONFIG_VMSPLIT_2G is not set | |
| # CONFIG_VMSPLIT_1G is not set | |
| CONFIG_PAGE_OFFSET=0xC0000000 | |
| CONFIG_NR_CPUS=2 | |
| CONFIG_HOTPLUG_CPU=y | |
| # CONFIG_ARM_PSCI is not set | |
| CONFIG_LOCAL_TIMERS=y | |
| CONFIG_ARCH_NR_GPIO=0 | |
| # CONFIG_PREEMPT_NONE is not set | |
| # CONFIG_PREEMPT_VOLUNTARY is not set | |
| CONFIG_PREEMPT=y | |
| CONFIG_PREEMPT_COUNT=y | |
| CONFIG_HZ=100 | |
| CONFIG_SCHED_HRTICK=y | |
| # CONFIG_THUMB2_KERNEL is not set | |
| CONFIG_AEABI=y | |
| CONFIG_OABI_COMPAT=y | |
| # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set | |
| # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set | |
| CONFIG_HAVE_ARCH_PFN_VALID=y | |
| CONFIG_HIGHMEM=y | |
| # CONFIG_HIGHPTE is not set | |
| CONFIG_FLATMEM=y | |
| CONFIG_FLAT_NODE_MEM_MAP=y | |
| CONFIG_HAVE_MEMBLOCK=y | |
| # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set | |
| CONFIG_PAGEFLAGS_EXTENDED=y | |
| CONFIG_SPLIT_PTLOCK_CPUS=4 | |
| # CONFIG_COMPACTION is not set | |
| # CONFIG_PHYS_ADDR_T_64BIT is not set | |
| CONFIG_ZONE_DMA_FLAG=0 | |
| CONFIG_BOUNCE=y | |
| CONFIG_NEED_BOUNCE_POOL=y | |
| # CONFIG_KSM is not set | |
| CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 | |
| CONFIG_CROSS_MEMORY_ATTACH=y | |
| # CONFIG_CLEANCACHE is not set | |
| CONFIG_FORCE_MAX_ZONEORDER=11 | |
| CONFIG_ALIGNMENT_TRAP=y | |
| # CONFIG_UACCESS_WITH_MEMCPY is not set | |
| # CONFIG_SECCOMP is not set | |
| # CONFIG_CC_STACKPROTECTOR is not set | |
| # CONFIG_XEN is not set | |
| # CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set | |
| # | |
| # Boot options | |
| # | |
| CONFIG_USE_OF=y | |
| CONFIG_ATAGS=y | |
| CONFIG_DEPRECATED_PARAM_STRUCT=y | |
| CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE=y | |
| CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES="meson6_g18" | |
| CONFIG_ZBOOT_ROM_TEXT=0 | |
| CONFIG_ZBOOT_ROM_BSS=0 | |
| CONFIG_ARM_APPENDED_DTB=y | |
| CONFIG_ARM_ATAG_DTB_COMPAT=y | |
| # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set | |
| # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set | |
| CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_APPEND=y | |
| CONFIG_CMDLINE="" | |
| # CONFIG_XIP_KERNEL is not set | |
| # CONFIG_KEXEC is not set | |
| # CONFIG_CRASH_DUMP is not set | |
| # CONFIG_AUTO_ZRELADDR is not set | |
| # | |
| # CPU Power Management | |
| # | |
| # | |
| # CPU Frequency scaling | |
| # | |
| CONFIG_CPU_FREQ=y | |
| CONFIG_CPU_FREQ_TABLE=y | |
| CONFIG_CPU_FREQ_GOV_COMMON=y | |
| CONFIG_CPU_FREQ_STAT=y | |
| # CONFIG_CPU_FREQ_STAT_DETAILS is not set | |
| CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_HOTPLUG is not set | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set | |
| # CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set | |
| CONFIG_CPU_FREQ_GOV_PERFORMANCE=y | |
| # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set | |
| # CONFIG_CPU_FREQ_GOV_USERSPACE is not set | |
| CONFIG_CPU_FREQ_GOV_ONDEMAND=y | |
| CONFIG_CPU_FREQ_GOV_HOTPLUG=y | |
| # CONFIG_CPU_FREQ_GOV_INTERACTIVE is not set | |
| CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y | |
| # | |
| # ARM CPU frequency scaling drivers | |
| # | |
| # CONFIG_ARM_EXYNOS4210_CPUFREQ is not set | |
| # CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set | |
| # CONFIG_ARM_EXYNOS5250_CPUFREQ is not set | |
| # CONFIG_ARM_KIRKWOOD_CPUFREQ is not set | |
| CONFIG_AMLOGIC_MESON_CPUFREQ=y | |
| # CONFIG_CPU_IDLE is not set | |
| # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set | |
| # | |
| # Floating point emulation | |
| # | |
| # | |
| # At least one emulation must be selected | |
| # | |
| # CONFIG_FPE_NWFPE is not set | |
| # CONFIG_FPE_FASTFPE is not set | |
| CONFIG_VFP=y | |
| CONFIG_VFPv3=y | |
| CONFIG_NEON=y | |
| # | |
| # Userspace binary formats | |
| # | |
| CONFIG_BINFMT_ELF=y | |
| CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y | |
| CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y | |
| CONFIG_BINFMT_SCRIPT=y | |
| # CONFIG_HAVE_AOUT is not set | |
| CONFIG_BINFMT_MISC=y | |
| CONFIG_COREDUMP=y | |
| # | |
| # Power management options | |
| # | |
| CONFIG_SUSPEND=y | |
| CONFIG_SUSPEND_FREEZER=y | |
| CONFIG_HAS_WAKELOCK=y | |
| CONFIG_HAS_EARLYSUSPEND=y | |
| CONFIG_WAKELOCK=y | |
| CONFIG_WAKELOCK_STAT=y | |
| CONFIG_USER_WAKELOCK=y | |
| CONFIG_EARLYSUSPEND=y | |
| # CONFIG_FORCE_POWER_ON_STATE_AFTER_RESUME is not set | |
| CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL=y | |
| # CONFIG_CONSOLE_EARLYSUSPEND is not set | |
| # CONFIG_FB_EARLYSUSPEND is not set | |
| CONFIG_PM_SLEEP=y | |
| CONFIG_PM_SLEEP_SMP=y | |
| # CONFIG_PM_AUTOSLEEP is not set | |
| # CONFIG_PM_WAKELOCKS is not set | |
| CONFIG_PM_RUNTIME=y | |
| CONFIG_PM=y | |
| # CONFIG_PM_DEBUG is not set | |
| # CONFIG_APM_EMULATION is not set | |
| CONFIG_PM_CLK=y | |
| CONFIG_CPU_PM=y | |
| # CONFIG_SUSPEND_TIME is not set | |
| CONFIG_ARCH_SUSPEND_POSSIBLE=y | |
| CONFIG_ARM_CPU_SUSPEND=y | |
| CONFIG_NET=y | |
| # | |
| # Networking options | |
| # | |
| CONFIG_PACKET=y | |
| # CONFIG_PACKET_DIAG is not set | |
| CONFIG_UNIX=y | |
| # CONFIG_UNIX_DIAG is not set | |
| CONFIG_XFRM=y | |
| CONFIG_XFRM_ALGO=y | |
| # CONFIG_XFRM_USER is not set | |
| # CONFIG_XFRM_SUB_POLICY is not set | |
| # CONFIG_XFRM_MIGRATE is not set | |
| # CONFIG_XFRM_STATISTICS is not set | |
| CONFIG_NET_KEY=y | |
| # CONFIG_NET_KEY_MIGRATE is not set | |
| CONFIG_INET=y | |
| CONFIG_IP_MULTICAST=y | |
| CONFIG_IP_ADVANCED_ROUTER=y | |
| # CONFIG_IP_FIB_TRIE_STATS is not set | |
| CONFIG_IP_MULTIPLE_TABLES=y | |
| # CONFIG_IP_ROUTE_MULTIPATH is not set | |
| # CONFIG_IP_ROUTE_VERBOSE is not set | |
| CONFIG_IP_PNP=y | |
| CONFIG_IP_PNP_DHCP=y | |
| # CONFIG_IP_PNP_BOOTP is not set | |
| # CONFIG_IP_PNP_RARP is not set | |
| # CONFIG_NET_IPIP is not set | |
| # CONFIG_NET_IPGRE_DEMUX is not set | |
| # CONFIG_NET_IP_TUNNEL is not set | |
| # CONFIG_IP_MROUTE is not set | |
| # CONFIG_ARPD is not set | |
| # CONFIG_SYN_COOKIES is not set | |
| # CONFIG_NET_IPVTI is not set | |
| # CONFIG_INET_AH is not set | |
| CONFIG_INET_ESP=y | |
| # CONFIG_INET_IPCOMP is not set | |
| # CONFIG_INET_XFRM_TUNNEL is not set | |
| # CONFIG_INET_TUNNEL is not set | |
| CONFIG_INET_XFRM_MODE_TRANSPORT=y | |
| CONFIG_INET_XFRM_MODE_TUNNEL=y | |
| # CONFIG_INET_XFRM_MODE_BEET is not set | |
| # CONFIG_INET_LRO is not set | |
| CONFIG_INET_DIAG=y | |
| CONFIG_INET_TCP_DIAG=y | |
| # CONFIG_INET_UDP_DIAG is not set | |
| # CONFIG_TCP_CONG_ADVANCED is not set | |
| CONFIG_TCP_CONG_CUBIC=y | |
| CONFIG_DEFAULT_TCP_CONG="cubic" | |
| # CONFIG_TCP_MD5SIG is not set | |
| # CONFIG_IPV6 is not set | |
| # CONFIG_ANDROID_PARANOID_NETWORK is not set | |
| # CONFIG_NET_ACTIVITY_STATS is not set | |
| # CONFIG_NETWORK_SECMARK is not set | |
| # CONFIG_NETWORK_PHY_TIMESTAMPING is not set | |
| CONFIG_NETFILTER=y | |
| # CONFIG_NETFILTER_DEBUG is not set | |
| CONFIG_NETFILTER_ADVANCED=y | |
| # CONFIG_BRIDGE_NETFILTER is not set | |
| # | |
| # Core Netfilter Configuration | |
| # | |
| CONFIG_NETFILTER_NETLINK=m | |
| # CONFIG_NETFILTER_NETLINK_ACCT is not set | |
| # CONFIG_NETFILTER_NETLINK_QUEUE is not set | |
| CONFIG_NETFILTER_NETLINK_LOG=m | |
| CONFIG_NF_CONNTRACK=m | |
| # CONFIG_NF_CONNTRACK_MARK is not set | |
| # CONFIG_NF_CONNTRACK_PROCFS is not set | |
| # CONFIG_NF_CONNTRACK_EVENTS is not set | |
| # CONFIG_NF_CONNTRACK_TIMEOUT is not set | |
| # CONFIG_NF_CONNTRACK_TIMESTAMP is not set | |
| # CONFIG_NF_CT_PROTO_DCCP is not set | |
| # CONFIG_NF_CT_PROTO_SCTP is not set | |
| # CONFIG_NF_CT_PROTO_UDPLITE is not set | |
| # CONFIG_NF_CONNTRACK_AMANDA is not set | |
| CONFIG_NF_CONNTRACK_FTP=m | |
| # CONFIG_NF_CONNTRACK_H323 is not set | |
| CONFIG_NF_CONNTRACK_IRC=m | |
| CONFIG_NF_CONNTRACK_BROADCAST=m | |
| CONFIG_NF_CONNTRACK_NETBIOS_NS=m | |
| # CONFIG_NF_CONNTRACK_SNMP is not set | |
| # CONFIG_NF_CONNTRACK_PPTP is not set | |
| # CONFIG_NF_CONNTRACK_SANE is not set | |
| CONFIG_NF_CONNTRACK_SIP=m | |
| # CONFIG_NF_CONNTRACK_TFTP is not set | |
| CONFIG_NF_CT_NETLINK=m | |
| # CONFIG_NF_CT_NETLINK_TIMEOUT is not set | |
| CONFIG_NF_NAT=m | |
| CONFIG_NF_NAT_NEEDED=y | |
| # CONFIG_NF_NAT_AMANDA is not set | |
| CONFIG_NF_NAT_FTP=m | |
| CONFIG_NF_NAT_IRC=m | |
| CONFIG_NF_NAT_SIP=m | |
| # CONFIG_NF_NAT_TFTP is not set | |
| CONFIG_NETFILTER_XTABLES=m | |
| # | |
| # Xtables combined modules | |
| # | |
| # CONFIG_NETFILTER_XT_MARK is not set | |
| # CONFIG_NETFILTER_XT_CONNMARK is not set | |
| # | |
| # Xtables targets | |
| # | |
| # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set | |
| # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set | |
| # CONFIG_NETFILTER_XT_TARGET_HMARK is not set | |
| # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set | |
| # CONFIG_NETFILTER_XT_TARGET_LED is not set | |
| # CONFIG_NETFILTER_XT_TARGET_LOG is not set | |
| # CONFIG_NETFILTER_XT_TARGET_MARK is not set | |
| # CONFIG_NETFILTER_XT_TARGET_NETMAP is not set | |
| # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set | |
| # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set | |
| # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set | |
| # CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set | |
| # CONFIG_NETFILTER_XT_TARGET_TEE is not set | |
| # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set | |
| # | |
| # Xtables matches | |
| # | |
| # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set | |
| # CONFIG_NETFILTER_XT_MATCH_BPF is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set | |
| # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set | |
| # CONFIG_NETFILTER_XT_MATCH_CPU is not set | |
| # CONFIG_NETFILTER_XT_MATCH_DCCP is not set | |
| # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set | |
| # CONFIG_NETFILTER_XT_MATCH_DSCP is not set | |
| # CONFIG_NETFILTER_XT_MATCH_ECN is not set | |
| # CONFIG_NETFILTER_XT_MATCH_ESP is not set | |
| # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_HELPER is not set | |
| # CONFIG_NETFILTER_XT_MATCH_HL is not set | |
| CONFIG_NETFILTER_XT_MATCH_IPRANGE=m | |
| # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set | |
| # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_MAC is not set | |
| # CONFIG_NETFILTER_XT_MATCH_MARK is not set | |
| # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_OSF is not set | |
| CONFIG_NETFILTER_XT_MATCH_OWNER=m | |
| # CONFIG_NETFILTER_XT_MATCH_POLICY is not set | |
| # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set | |
| # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set | |
| # CONFIG_NETFILTER_XT_MATCH_QUOTA2 is not set | |
| # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set | |
| # CONFIG_NETFILTER_XT_MATCH_REALM is not set | |
| # CONFIG_NETFILTER_XT_MATCH_RECENT is not set | |
| # CONFIG_NETFILTER_XT_MATCH_SCTP is not set | |
| CONFIG_NETFILTER_XT_MATCH_STATE=m | |
| # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set | |
| # CONFIG_NETFILTER_XT_MATCH_STRING is not set | |
| # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set | |
| # CONFIG_NETFILTER_XT_MATCH_TIME is not set | |
| # CONFIG_NETFILTER_XT_MATCH_U32 is not set | |
| # CONFIG_IP_SET is not set | |
| # CONFIG_IP_VS is not set | |
| # | |
| # IP: Netfilter Configuration | |
| # | |
| CONFIG_NF_DEFRAG_IPV4=m | |
| CONFIG_NF_CONNTRACK_IPV4=m | |
| CONFIG_IP_NF_IPTABLES=m | |
| # CONFIG_IP_NF_MATCH_AH is not set | |
| # CONFIG_IP_NF_MATCH_ECN is not set | |
| # CONFIG_IP_NF_MATCH_TTL is not set | |
| CONFIG_IP_NF_FILTER=m | |
| CONFIG_IP_NF_TARGET_REJECT=m | |
| # CONFIG_IP_NF_TARGET_REJECT_SKERR is not set | |
| # CONFIG_IP_NF_TARGET_ULOG is not set | |
| CONFIG_NF_NAT_IPV4=m | |
| CONFIG_IP_NF_TARGET_MASQUERADE=m | |
| # CONFIG_IP_NF_TARGET_NETMAP is not set | |
| # CONFIG_IP_NF_TARGET_REDIRECT is not set | |
| # CONFIG_NF_NAT_PPTP is not set | |
| # CONFIG_NF_NAT_H323 is not set | |
| # CONFIG_IP_NF_MANGLE is not set | |
| # CONFIG_IP_NF_RAW is not set | |
| # CONFIG_IP_NF_ARPTABLES is not set | |
| # CONFIG_BRIDGE_NF_EBTABLES is not set | |
| # CONFIG_IP_DCCP is not set | |
| # CONFIG_IP_SCTP is not set | |
| # CONFIG_RDS is not set | |
| # CONFIG_TIPC is not set | |
| # CONFIG_ATM is not set | |
| # CONFIG_L2TP is not set | |
| CONFIG_STP=y | |
| CONFIG_BRIDGE=y | |
| CONFIG_BRIDGE_IGMP_SNOOPING=y | |
| # CONFIG_BRIDGE_VLAN_FILTERING is not set | |
| CONFIG_HAVE_NET_DSA=y | |
| CONFIG_VLAN_8021Q=m | |
| # CONFIG_VLAN_8021Q_GVRP is not set | |
| # CONFIG_VLAN_8021Q_MVRP is not set | |
| # CONFIG_DECNET is not set | |
| CONFIG_LLC=y | |
| # CONFIG_LLC2 is not set | |
| # CONFIG_IPX is not set | |
| # CONFIG_ATALK is not set | |
| # CONFIG_X25 is not set | |
| # CONFIG_LAPB is not set | |
| # CONFIG_PHONET is not set | |
| # CONFIG_IEEE802154 is not set | |
| # CONFIG_NET_SCHED is not set | |
| # CONFIG_DCB is not set | |
| CONFIG_DNS_RESOLVER=y | |
| # CONFIG_BATMAN_ADV is not set | |
| # CONFIG_OPENVSWITCH is not set | |
| # CONFIG_VSOCKETS is not set | |
| # CONFIG_NETLINK_MMAP is not set | |
| # CONFIG_NETLINK_DIAG is not set | |
| CONFIG_RPS=y | |
| CONFIG_RFS_ACCEL=y | |
| CONFIG_XPS=y | |
| # CONFIG_NETPRIO_CGROUP is not set | |
| CONFIG_BQL=y | |
| # CONFIG_BPF_JIT is not set | |
| # | |
| # Network testing | |
| # | |
| # CONFIG_NET_PKTGEN is not set | |
| # CONFIG_HAMRADIO is not set | |
| # CONFIG_CAN is not set | |
| # CONFIG_IRDA is not set | |
| CONFIG_BT=m | |
| CONFIG_BT_RFCOMM=m | |
| CONFIG_BT_RFCOMM_TTY=y | |
| CONFIG_BT_BNEP=m | |
| CONFIG_BT_BNEP_MC_FILTER=y | |
| CONFIG_BT_BNEP_PROTO_FILTER=y | |
| CONFIG_BT_HIDP=m | |
| # | |
| # Bluetooth device drivers | |
| # | |
| CONFIG_BT_HCIBTUSB=m | |
| CONFIG_BT_HCIBTSDIO=m | |
| CONFIG_BT_HCIUART=m | |
| CONFIG_BT_HCIUART_H4=y | |
| CONFIG_BT_HCIUART_BCSP=y | |
| CONFIG_BT_HCIUART_ATH3K=y | |
| CONFIG_BT_HCIUART_LL=y | |
| CONFIG_BT_HCIUART_3WIRE=y | |
| CONFIG_BT_HCIBCM203X=m | |
| CONFIG_BT_HCIBPA10X=m | |
| CONFIG_BT_HCIBFUSB=m | |
| CONFIG_BT_HCIVHCI=m | |
| CONFIG_BT_MRVL=m | |
| CONFIG_BT_MRVL_SDIO=m | |
| CONFIG_BT_ATH3K=m | |
| # CONFIG_AF_RXRPC is not set | |
| CONFIG_FIB_RULES=y | |
| CONFIG_WIRELESS=y | |
| CONFIG_WIRELESS_EXT=y | |
| CONFIG_WEXT_CORE=y | |
| CONFIG_WEXT_PROC=y | |
| CONFIG_WEXT_PRIV=y | |
| CONFIG_CFG80211=y | |
| # CONFIG_NL80211_TESTMODE is not set | |
| # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set | |
| # CONFIG_CFG80211_REG_DEBUG is not set | |
| # CONFIG_CFG80211_CERTIFICATION_ONUS is not set | |
| CONFIG_CFG80211_DEFAULT_PS=y | |
| # CONFIG_CFG80211_DEBUGFS is not set | |
| # CONFIG_CFG80211_INTERNAL_REGDB is not set | |
| # CONFIG_CFG80211_WEXT is not set | |
| # CONFIG_LIB80211 is not set | |
| # CONFIG_CFG80211_ALLOW_RECONNECT is not set | |
| CONFIG_MAC80211=y | |
| CONFIG_MAC80211_HAS_RC=y | |
| # CONFIG_MAC80211_RC_PID is not set | |
| CONFIG_MAC80211_RC_MINSTREL=y | |
| CONFIG_MAC80211_RC_MINSTREL_HT=y | |
| CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y | |
| CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" | |
| # CONFIG_MAC80211_MESH is not set | |
| CONFIG_MAC80211_LEDS=y | |
| # CONFIG_MAC80211_DEBUGFS is not set | |
| # CONFIG_MAC80211_MESSAGE_TRACING is not set | |
| # CONFIG_MAC80211_DEBUG_MENU is not set | |
| # CONFIG_WIMAX is not set | |
| # CONFIG_RFKILL is not set | |
| # CONFIG_RFKILL_REGULATOR is not set | |
| # CONFIG_NET_9P is not set | |
| # CONFIG_CAIF is not set | |
| # CONFIG_CEPH_LIB is not set | |
| # CONFIG_NFC is not set | |
| CONFIG_HAVE_BPF_JIT=y | |
| # | |
| # Device Drivers | |
| # | |
| # | |
| # Amlogic Device Drivers | |
| # | |
| # | |
| # Char devices | |
| # | |
| CONFIG_EARLY_INIT=y | |
| # | |
| # Register Debug Support | |
| # | |
| # CONFIG_AML_REG_DEBUG is not set | |
| CONFIG_AM_UART=y | |
| CONFIG_AM_UART_CONSOLE=y | |
| CONFIG_OF_LM=y | |
| CONFIG_AML_RTC=y | |
| # | |
| # I2C Hardware Bus support | |
| # | |
| CONFIG_I2C_AML=y | |
| # CONFIG_I2C_SW_AML is not set | |
| # CONFIG_BCM2079X_I2C is not set | |
| CONFIG_AM_INPUT=y | |
| # CONFIG_SARADC_AM is not set | |
| CONFIG_MESON_INPUT_REMOTE=y | |
| CONFIG_AM_REMOTE=y | |
| # CONFIG_AM_IR_RECEIVER is not set | |
| # CONFIG_VIRTUAL_REMOTE is not set | |
| CONFIG_MESON_NEW_INPUT_REMOTE=y | |
| # CONFIG_NEW_AM_REMOTE is not set | |
| # CONFIG_NEW_AM_IR_TX is not set | |
| CONFIG_MESON_INPUT_KEYBOARD=y | |
| CONFIG_KEY_INPUT_CUSTOM_AM=y | |
| # CONFIG_TOUCH_KEY_PAD_IT7230 is not set | |
| # CONFIG_TOUCH_KEY_PAD_SO340010 is not set | |
| # CONFIG_TOUCH_KEY_PAD_HA2605 is not set | |
| # CONFIG_MESON_INPUT_TOUCHSCREEN is not set | |
| # CONFIG_AML_HOLD_KEY is not set | |
| # CONFIG_AML_CALL_KEY is not set | |
| # CONFIG_SENSOR_DEVICES is not set | |
| # CONFIG_AML_GPIO_KEY is not set | |
| CONFIG_GPIO_AMLOGIC=y | |
| CONFIG_PINCTRL_AMLOGIC=y | |
| # | |
| # Power Management Support | |
| # | |
| CONFIG_AMLOGIC_BOARD_HAS_PMU=y | |
| CONFIG_AMLOGIC_PMU_OF=y | |
| # CONFIG_CW2015 is not set | |
| # CONFIG_SMBA10XX_BATTERY is not set | |
| # CONFIG_BQ27x00_BATTERY is not set | |
| # CONFIG_UBOOT_BATTERY_PARAMETERS is not set | |
| # CONFIG_AML_PMU_ALGORITHM_SUPPORT is not set | |
| CONFIG_AML_DVFS=y | |
| # CONFIG_AW_AXP is not set | |
| CONFIG_MESON_CS_DCDC_REGULATOR=y | |
| # CONFIG_AML_PMU is not set | |
| # CONFIG_RICOH_PMU is not set | |
| # | |
| # Security key Support | |
| # | |
| CONFIG_SECURITYKEY=y | |
| # | |
| # key management Support | |
| # | |
| # CONFIG_UNIFY_KEY_MANAGE is not set | |
| # | |
| # EFUSE Support | |
| # | |
| CONFIG_EFUSE=y | |
| # CONFIG_EFUSE_WRITE_VERSION_PERMIT is not set | |
| CONFIG_EFUSE_LAYOUT_VERSION=3 | |
| # | |
| # Smartcard support | |
| # | |
| # CONFIG_AM_SMARTCARD is not set | |
| CONFIG_AML_VIRTUAL_THERMAL=y | |
| # CONFIG_AMLOGIC_THERMAL is not set | |
| # CONFIG_AML_WDT is not set | |
| # | |
| # AMLOGIC SPI Hardware bus support | |
| # | |
| # CONFIG_AMLOGIC_SPICC_MASTER is not set | |
| # | |
| # USB Support | |
| # | |
| CONFIG_AMLOGIC_USB=y | |
| CONFIG_USB_DWC_OTG_HCD=y | |
| CONFIG_USB_HOST_ELECT_TEST=y | |
| # | |
| # MMC/SD/SDIO Host Controller Drivers | |
| # | |
| # | |
| # Multimedia Card support | |
| # | |
| CONFIG_MMC_AML=y | |
| # CONFIG_MMC_AML_DEBUG is not set | |
| # CONFIG_AML_MMC_DEBUG_FORCE_SINGLE_BLOCK_RW is not set | |
| # | |
| # SPI NOR Flash support | |
| # | |
| # CONFIG_AMLOGIC_SPI_NOR is not set | |
| # | |
| # Meson NAND Device Support(For NEXT GEN NAND DRIV) | |
| # | |
| # CONFIG_AML_NEXT_GEN_NAND is not set | |
| CONFIG_AML_NFTL_NEW=y | |
| CONFIG_AML_NAND_KEY=y | |
| # | |
| # Meson NAND Device Support | |
| # | |
| CONFIG_AM_NAND=y | |
| CONFIG_AM_NAND_RBPIN=y | |
| CONFIG_AML_NAND_ENV=y | |
| CONFIG_NAND_KEY_BLOCK_NUM=8 | |
| # CONFIG_AML_NFTL is not set | |
| # CONFIG_AML_NEXT_NAND is not set | |
| # | |
| # Network devices | |
| # | |
| # | |
| # Ethernet Support | |
| # | |
| CONFIG_AM_ETHERNET=y | |
| CONFIG_PHYLIB=y | |
| # | |
| # MII PHY device drivers | |
| # | |
| # CONFIG_AML_PHY is not set | |
| CONFIG_AML_LAN8720=y | |
| CONFIG_AML_IP101_PHY=y | |
| CONFIG_AML_KSZ8091=y | |
| # CONFIG_AML_RTL8211F is not set | |
| CONFIG_AM_ETHERNET_DEBUG_LEVEL=1 | |
| CONFIG_AM_WIFI=y | |
| CONFIG_AM_WIFI_SD_MMC=y | |
| # CONFIG_DHD_USE_STATIC_BUF is not set | |
| CONFIG_AM_WIFI_USB=y | |
| # CONFIG_RTL8189ES is not set | |
| CONFIG_RTL8192EU=m | |
| CONFIG_RTL8723AU=m | |
| # CONFIG_RTL8723AS is not set | |
| # CONFIG_RTL8723BS is not set | |
| CONFIG_RTL8821AU=m | |
| CONFIG_RTL8812AU=m | |
| CONFIG_RTL8192CU=m | |
| CONFIG_RTL8192DU=m | |
| CONFIG_RTL8188EU=m | |
| CONFIG_RTL8188EU_MP=m | |
| CONFIG_SDIO_DHD_CDC_WIFI_40181_MODULE=y | |
| CONFIG_BCMDHD_FW_PATH="/lib/firmware/brcm/" | |
| CONFIG_BCMDHD_NVRAM_PATH="/lib/firmware/brcm/ap6210-nvram.txt" | |
| CONFIG_BCMDHD_CONFIG_PATH="/system/etc/wifi/config.txt" | |
| CONFIG_BCMDHD_POWER_OFF_IN_SUSPEND=y | |
| CONFIG_BCMDHD_OOB=y | |
| # CONFIG_SDIO_HARD_IRQ is not set | |
| # | |
| # Bluetooth Device Support | |
| # | |
| # CONFIG_BT_WAKE_CTRL is not set | |
| # CONFIG_BT_RTKBTUSB is not set | |
| # CONFIG_MESON_NFC is not set | |
| # | |
| # Audio devices | |
| # | |
| # | |
| # Audio Interface | |
| # | |
| CONFIG_AMAUDIO=y | |
| # | |
| # Amlogic Audio Interface V2 | |
| # | |
| # CONFIG_AMAUDIO2 is not set | |
| # | |
| # Audio dsp process | |
| # | |
| CONFIG_AML_AUDIO_DSP=y | |
| # | |
| # Video devices | |
| # | |
| CONFIG_AML_VFM=y | |
| CONFIG_AM_PTSSERVER=y | |
| # CONFIG_H264_4K2K_SINGLE_CORE is not set | |
| # CONFIG_VSYNC_RDMA is not set | |
| CONFIG_AM_VIDEO=y | |
| # CONFIG_AM_VIDEO2 is not set | |
| # CONFIG_KEEP_FRAME_RESERVED is not set | |
| # CONFIG_SUPPORT_VIDEO_ON_VPP2 is not set | |
| CONFIG_GE2D_KEEP_FRAME=y | |
| # | |
| # Video Decoders | |
| # | |
| CONFIG_AM_VDEC_MPEG12=y | |
| CONFIG_AM_VDEC_MPEG4=y | |
| CONFIG_AM_VDEC_VC1=y | |
| CONFIG_AM_VDEC_H264=y | |
| CONFIG_AM_VDEC_H264MVC=y | |
| CONFIG_AM_VDEC_MJPEG=y | |
| # CONFIG_AM_ENCODER is not set | |
| # CONFIG_AM_JPEG_ENCODER is not set | |
| CONFIG_AM_PIC_DEC=y | |
| CONFIG_AM_VDEC_REAL=y | |
| CONFIG_AM_VDEC_AVS=y | |
| CONFIG_AM_JPEGDEC=y | |
| CONFIG_AM_TIMESYNC=y | |
| CONFIG_AM_STREAMING=y | |
| CONFIG_AM_SUBTITLE=y | |
| CONFIG_AM_VIDEOCAPTURE=y | |
| # | |
| # Canvas management driver | |
| # | |
| CONFIG_AM_CANVAS=y | |
| CONFIG_AM_DISPLAY_MODULE=y | |
| # | |
| # Amlogic video output module | |
| # | |
| CONFIG_AM_TV_OUTPUT=y | |
| CONFIG_AML_VOUT_FRAMERATE_AUTOMATION=y | |
| # CONFIG_AM_LCD_OUTPUT is not set | |
| # | |
| # Amlogic video output2 module | |
| # | |
| # CONFIG_AM_TV_OUTPUT2 is not set | |
| # | |
| # Amlogic TV LCD Support | |
| # | |
| # CONFIG_AML_TV_LCD is not set | |
| # | |
| # Amlogic osd module | |
| # | |
| CONFIG_FB_AM=y | |
| CONFIG_FB_OSD2_ENABLE=y | |
| # CONFIG_FB_OSD2_CURSOR is not set | |
| CONFIG_FB_OSD2_DEFAULT_BITS_PER_PIXEL=32 | |
| CONFIG_FB_OSD2_DEFAULT_WIDTH=1280 | |
| CONFIG_FB_OSD2_DEFAULT_HEIGHT=720 | |
| CONFIG_FB_OSD2_DEFAULT_WIDTH_VIRTUAL=1280 | |
| CONFIG_FB_OSD2_DEFAULT_HEIGHT_VIRTUAL=1440 | |
| CONFIG_FB_OSD1_DEFAULT_BITS_PER_PIXEL=32 | |
| CONFIG_FB_OSD1_DEFAULT_WIDTH=1280 | |
| CONFIG_FB_OSD1_DEFAULT_HEIGHT=720 | |
| CONFIG_FB_OSD1_DEFAULT_WIDTH_VIRTUAL=1280 | |
| CONFIG_FB_OSD1_DEFAULT_HEIGHT_VIRTUAL=1440 | |
| CONFIG_FB_AMLOGIC_UMP=y | |
| # | |
| # Amlogic osd_ext module | |
| # | |
| # | |
| # Amlogic Backlight Support | |
| # | |
| # CONFIG_AMLOGIC_BACKLIGHT is not set | |
| # CONFIG_AML_BL_PWM_ATTR is not set | |
| # CONFIG_AML_LOCAL_DIMMING is not set | |
| # CONFIG_IW7023_BACKLIGHT is not set | |
| # CONFIG_IW7023_USE_EEPROM is not set | |
| CONFIG_AM_GE2D=y | |
| CONFIG_AM_LOGO=y | |
| CONFIG_AM_HDMI_ONLY=y | |
| # | |
| # HDMI TX Support | |
| # | |
| CONFIG_AML_HDMI_TX=y | |
| # CONFIG_AML_HDMI_TX_HDCP is not set | |
| # CONFIG_AML_HDMI_TX_CTS_DVI is not set | |
| # CONFIG_TVIN is not set | |
| # CONFIG_AML_EXT_HDMIIN is not set | |
| # CONFIG_DEBUG_DRIVER is not set | |
| # | |
| # Post Process Manager driver | |
| # | |
| CONFIG_POST_PROCESS_MANAGER=y | |
| CONFIG_POST_PROCESS_MANAGER_PPSCALER=y | |
| CONFIG_POST_PROCESS_MANAGER_3D_PROCESS=y | |
| # | |
| # Amlogic Camera Support | |
| # | |
| # CONFIG_VIDEO_AMLOGIC_CAPTURE is not set | |
| # | |
| # V4L2 Video Support | |
| # | |
| # CONFIG_V4L_AMLOGIC_VIDEO is not set | |
| CONFIG_V4L_AMLOGIC_VIDEO2=y | |
| # | |
| # Amlogic ion video support | |
| # | |
| # CONFIG_VIDEOBUF2_ION is not set | |
| # CONFIG_AMLOGIC_IONVIDEO is not set | |
| # | |
| # Deinterlace driver | |
| # | |
| CONFIG_DEINTERLACE=y | |
| # CONFIG_AM_DEINTERLACE_SD_ONLY is not set | |
| # | |
| # MIPI Support | |
| # | |
| # CONFIG_AMLOGIC_MIPI is not set | |
| # CONFIG_D2D3_PROCESS is not set | |
| # | |
| # Amlogic VE & CM | |
| # | |
| # CONFIG_AM_VECM is not set | |
| # | |
| # Amlogic DVB driver | |
| # | |
| CONFIG_AM_DVB=y | |
| # | |
| # AMLOGIC CI Driver | |
| # | |
| # CONFIG_AM_CI is not set | |
| # CONFIG_AM_PCMCIA is not set | |
| # CONFIG_AM_IOBUS is not set | |
| # CONFIG_AM_SI2177 is not set | |
| CONFIG_AM_AVL6211=y | |
| # CONFIG_AM_SI2168 is not set | |
| # CONFIG_AM_MXL101 is not set | |
| # | |
| # GPU (ARM Mali) | |
| # | |
| # | |
| # Mali 400 UMP device driver | |
| # | |
| CONFIG_UMP=y | |
| # CONFIG_UMP_DEBUG is not set | |
| # | |
| # Mali GPU OpenGL device driver | |
| # | |
| CONFIG_MALI400=m | |
| # CONFIG_MALI400_DEBUG is not set | |
| # CONFIG_MALI400_PROFILING is not set | |
| CONFIG_MALI400_UMP=y | |
| # CONFIG_MALI400_POWER_PERFORMANCE_POLICY is not set | |
| CONFIG_MALI_DMA_BUF_MAP_ON_ATTACH=y | |
| CONFIG_MALI_SHARED_INTERRUPTS=y | |
| CONFIG_MESON6_GPU_EXTRA=y | |
| # CONFIG_MALI_PMU_PARALLEL_POWER_UP is not set | |
| # | |
| # ION support | |
| # | |
| # CONFIG_AMLOGIC_ION is not set | |
| # | |
| # Amlogic Crypto Support | |
| # | |
| CONFIG_CRYPTO_AML_HW_CRYPRO=y | |
| # CONFIG_CRYPTO_DEVICE_DRIVER is not set | |
| # | |
| # MHL Support | |
| # | |
| # CONFIG_PANEL_IT6681 is not set | |
| # | |
| # Amlogic PMU battery algorithm Support | |
| # | |
| # | |
| # Amlogic touch algorithm Support | |
| # | |
| # CONFIG_AML_TOUCH_ALGORITHM_SUPPORT is not set | |
| # | |
| # Generic Driver Options | |
| # | |
| CONFIG_UEVENT_HELPER_PATH="/sbin/mdev" | |
| CONFIG_DEVTMPFS=y | |
| CONFIG_DEVTMPFS_MOUNT=y | |
| CONFIG_STANDALONE=y | |
| CONFIG_PREVENT_FIRMWARE_BUILD=y | |
| CONFIG_FW_LOADER=y | |
| CONFIG_FIRMWARE_IN_KERNEL=y | |
| CONFIG_EXTRA_FIRMWARE="" | |
| CONFIG_FW_LOADER_USER_HELPER=y | |
| # CONFIG_DEBUG_DEVRES is not set | |
| # CONFIG_SYS_HYPERVISOR is not set | |
| # CONFIG_GENERIC_CPU_DEVICES is not set | |
| CONFIG_REGMAP=y | |
| CONFIG_REGMAP_I2C=y | |
| CONFIG_REGMAP_SPI=y | |
| CONFIG_DMA_SHARED_BUFFER=y | |
| # CONFIG_CMA is not set | |
| # | |
| # Bus devices | |
| # | |
| # CONFIG_CONNECTOR is not set | |
| CONFIG_MTD=y | |
| # CONFIG_MTD_TESTS is not set | |
| # CONFIG_MTD_REDBOOT_PARTS is not set | |
| # CONFIG_MTD_CMDLINE_PARTS is not set | |
| # CONFIG_MTD_AFS_PARTS is not set | |
| CONFIG_MTD_OF_PARTS=y | |
| # CONFIG_MTD_AR7_PARTS is not set | |
| # | |
| # User Modules And Translation Layers | |
| # | |
| CONFIG_MTD_BLKDEVS=y | |
| CONFIG_MTD_BLOCK=y | |
| # CONFIG_FTL is not set | |
| # CONFIG_NFTL is not set | |
| # CONFIG_INFTL is not set | |
| # CONFIG_RFD_FTL is not set | |
| # CONFIG_SSFDC is not set | |
| # CONFIG_SM_FTL is not set | |
| # CONFIG_MTD_OOPS is not set | |
| # | |
| # RAM/ROM/Flash chip drivers | |
| # | |
| # CONFIG_MTD_CFI is not set | |
| # CONFIG_MTD_JEDECPROBE is not set | |
| CONFIG_MTD_MAP_BANK_WIDTH_1=y | |
| CONFIG_MTD_MAP_BANK_WIDTH_2=y | |
| CONFIG_MTD_MAP_BANK_WIDTH_4=y | |
| # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | |
| # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | |
| # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | |
| CONFIG_MTD_CFI_I1=y | |
| CONFIG_MTD_CFI_I2=y | |
| # CONFIG_MTD_CFI_I4 is not set | |
| # CONFIG_MTD_CFI_I8 is not set | |
| # CONFIG_MTD_RAM is not set | |
| # CONFIG_MTD_ROM is not set | |
| # CONFIG_MTD_ABSENT is not set | |
| # | |
| # Mapping drivers for chip access | |
| # | |
| # CONFIG_MTD_COMPLEX_MAPPINGS is not set | |
| # CONFIG_MTD_PLATRAM is not set | |
| # | |
| # Self-contained MTD device drivers | |
| # | |
| # CONFIG_MTD_DATAFLASH is not set | |
| # CONFIG_MTD_M25P80 is not set | |
| # CONFIG_MTD_SST25L is not set | |
| # CONFIG_MTD_SLRAM is not set | |
| # CONFIG_MTD_PHRAM is not set | |
| # CONFIG_MTD_MTDRAM is not set | |
| # CONFIG_MTD_BLOCK2MTD is not set | |
| # | |
| # Disk-On-Chip Device Drivers | |
| # | |
| # CONFIG_MTD_DOCG3 is not set | |
| CONFIG_MTD_NAND_IDS=y | |
| CONFIG_MTD_NAND_ECC=y | |
| # CONFIG_MTD_NAND_ECC_SMC is not set | |
| CONFIG_MTD_NAND=y | |
| # CONFIG_MTD_NAND_ECC_BCH is not set | |
| # CONFIG_MTD_SM_COMMON is not set | |
| # CONFIG_MTD_NAND_DENALI is not set | |
| # CONFIG_MTD_NAND_GPIO is not set | |
| # CONFIG_MTD_NAND_DISKONCHIP is not set | |
| # CONFIG_MTD_NAND_DOCG4 is not set | |
| # CONFIG_MTD_NAND_NANDSIM is not set | |
| # CONFIG_MTD_NAND_PLATFORM is not set | |
| # CONFIG_MTD_ALAUDA is not set | |
| # CONFIG_MTD_ONENAND is not set | |
| # | |
| # LPDDR flash memory drivers | |
| # | |
| # CONFIG_MTD_LPDDR is not set | |
| CONFIG_MTD_UBI=y | |
| CONFIG_MTD_UBI_WL_THRESHOLD=4096 | |
| CONFIG_MTD_UBI_BEB_LIMIT=20 | |
| # CONFIG_MTD_UBI_FASTMAP is not set | |
| # CONFIG_MTD_UBI_GLUEBI is not set | |
| CONFIG_DTC=y | |
| CONFIG_OF=y | |
| # | |
| # Device Tree and Open Firmware support | |
| # | |
| # CONFIG_PROC_DEVICETREE is not set | |
| # CONFIG_OF_SELFTEST is not set | |
| CONFIG_OF_FLATTREE=y | |
| CONFIG_OF_EARLY_FLATTREE=y | |
| CONFIG_OF_ADDRESS=y | |
| CONFIG_OF_IRQ=y | |
| CONFIG_OF_DEVICE=y | |
| CONFIG_OF_I2C=y | |
| CONFIG_OF_NET=y | |
| CONFIG_OF_MDIO=y | |
| CONFIG_OF_MTD=y | |
| # CONFIG_PARPORT is not set | |
| CONFIG_BLK_DEV=y | |
| # CONFIG_BLK_DEV_COW_COMMON is not set | |
| CONFIG_BLK_DEV_LOOP=y | |
| CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 | |
| # CONFIG_BLK_DEV_CRYPTOLOOP is not set | |
| # CONFIG_BLK_DEV_DRBD is not set | |
| # CONFIG_BLK_DEV_NBD is not set | |
| # CONFIG_BLK_DEV_RAM is not set | |
| # CONFIG_CDROM_PKTCDVD is not set | |
| # CONFIG_ATA_OVER_ETH is not set | |
| # CONFIG_MG_DISK is not set | |
| # CONFIG_BLK_DEV_RBD is not set | |
| # | |
| # Misc devices | |
| # | |
| # CONFIG_SENSORS_LIS3LV02D is not set | |
| # CONFIG_AD525X_DPOT is not set | |
| # CONFIG_ATMEL_PWM is not set | |
| # CONFIG_DUMMY_IRQ is not set | |
| # CONFIG_ICS932S401 is not set | |
| # CONFIG_ATMEL_SSC is not set | |
| # CONFIG_ENCLOSURE_SERVICES is not set | |
| # CONFIG_APDS9802ALS is not set | |
| # CONFIG_ISL29003 is not set | |
| # CONFIG_ISL29020 is not set | |
| # CONFIG_SENSORS_TSL2550 is not set | |
| # CONFIG_SENSORS_BH1780 is not set | |
| # CONFIG_SENSORS_BH1770 is not set | |
| # CONFIG_SENSORS_APDS990X is not set | |
| # CONFIG_HMC6352 is not set | |
| # CONFIG_DS1682 is not set | |
| # CONFIG_TI_DAC7512 is not set | |
| # CONFIG_UID_STAT is not set | |
| # CONFIG_BMP085_I2C is not set | |
| # CONFIG_BMP085_SPI is not set | |
| # CONFIG_USB_SWITCH_FSA9480 is not set | |
| # CONFIG_LATTICE_ECP3_CONFIG is not set | |
| # CONFIG_SRAM is not set | |
| # CONFIG_C2PORT is not set | |
| # | |
| # EEPROM support | |
| # | |
| # CONFIG_EEPROM_AT24 is not set | |
| # CONFIG_EEPROM_AT25 is not set | |
| # CONFIG_EEPROM_LEGACY is not set | |
| # CONFIG_EEPROM_MAX6875 is not set | |
| CONFIG_EEPROM_93CX6=m | |
| # CONFIG_EEPROM_93XX46 is not set | |
| # | |
| # Texas Instruments shared transport line discipline | |
| # | |
| # CONFIG_TI_ST is not set | |
| # CONFIG_SENSORS_LIS3_SPI is not set | |
| # CONFIG_SENSORS_LIS3_I2C is not set | |
| # | |
| # Altera FPGA firmware download module | |
| # | |
| # CONFIG_ALTERA_STAPL is not set | |
| # | |
| # SCSI device support | |
| # | |
| CONFIG_SCSI_MOD=y | |
| # CONFIG_RAID_ATTRS is not set | |
| CONFIG_SCSI=y | |
| CONFIG_SCSI_DMA=y | |
| # CONFIG_SCSI_TGT is not set | |
| # CONFIG_SCSI_NETLINK is not set | |
| CONFIG_SCSI_PROC_FS=y | |
| # | |
| # SCSI support type (disk, tape, CD-ROM) | |
| # | |
| CONFIG_BLK_DEV_SD=y | |
| # CONFIG_CHR_DEV_ST is not set | |
| # CONFIG_CHR_DEV_OSST is not set | |
| CONFIG_BLK_DEV_SR=y | |
| # CONFIG_BLK_DEV_SR_VENDOR is not set | |
| # CONFIG_CHR_DEV_SG is not set | |
| # CONFIG_CHR_DEV_SCH is not set | |
| CONFIG_SCSI_MULTI_LUN=y | |
| # CONFIG_SCSI_CONSTANTS is not set | |
| # CONFIG_SCSI_LOGGING is not set | |
| # CONFIG_SCSI_SCAN_ASYNC is not set | |
| # | |
| # SCSI Transports | |
| # | |
| # CONFIG_SCSI_SPI_ATTRS is not set | |
| # CONFIG_SCSI_FC_ATTRS is not set | |
| # CONFIG_SCSI_ISCSI_ATTRS is not set | |
| # CONFIG_SCSI_SAS_ATTRS is not set | |
| # CONFIG_SCSI_SAS_LIBSAS is not set | |
| # CONFIG_SCSI_SRP_ATTRS is not set | |
| CONFIG_SCSI_LOWLEVEL=y | |
| # CONFIG_ISCSI_TCP is not set | |
| # CONFIG_ISCSI_BOOT_SYSFS is not set | |
| # CONFIG_SCSI_UFSHCD is not set | |
| # CONFIG_LIBFC is not set | |
| # CONFIG_LIBFCOE is not set | |
| # CONFIG_SCSI_DEBUG is not set | |
| # CONFIG_SCSI_DH is not set | |
| # CONFIG_SCSI_OSD_INITIATOR is not set | |
| # CONFIG_ATA is not set | |
| CONFIG_MD=y | |
| # CONFIG_BLK_DEV_MD is not set | |
| # CONFIG_BCACHE is not set | |
| CONFIG_BLK_DEV_DM_BUILTIN=y | |
| CONFIG_BLK_DEV_DM=y | |
| CONFIG_DM_DEBUG=y | |
| CONFIG_DM_CRYPT=y | |
| # CONFIG_DM_SNAPSHOT is not set | |
| # CONFIG_DM_THIN_PROVISIONING is not set | |
| # CONFIG_DM_CACHE is not set | |
| # CONFIG_DM_MIRROR is not set | |
| # CONFIG_DM_RAID is not set | |
| # CONFIG_DM_ZERO is not set | |
| # CONFIG_DM_MULTIPATH is not set | |
| # CONFIG_DM_DELAY is not set | |
| CONFIG_DM_UEVENT=y | |
| # CONFIG_DM_FLAKEY is not set | |
| # CONFIG_DM_VERITY is not set | |
| # CONFIG_TARGET_CORE is not set | |
| CONFIG_NETDEVICES=y | |
| CONFIG_NET_CORE=y | |
| # CONFIG_BONDING is not set | |
| # CONFIG_DUMMY is not set | |
| # CONFIG_EQUALIZER is not set | |
| CONFIG_MII=y | |
| # CONFIG_NET_TEAM is not set | |
| # CONFIG_MACVLAN is not set | |
| # CONFIG_VXLAN is not set | |
| CONFIG_NETCONSOLE=y | |
| # CONFIG_NETPOLL is not set | |
| # CONFIG_NET_POLL_CONTROLLER is not set | |
| CONFIG_TUN=y | |
| # CONFIG_VETH is not set | |
| # | |
| # CAIF transport drivers | |
| # | |
| # | |
| # Distributed Switch Architecture drivers | |
| # | |
| # CONFIG_NET_DSA_MV88E6XXX is not set | |
| # CONFIG_NET_DSA_MV88E6060 is not set | |
| # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set | |
| # CONFIG_NET_DSA_MV88E6131 is not set | |
| # CONFIG_NET_DSA_MV88E6123_61_65 is not set | |
| CONFIG_ETHERNET=y | |
| CONFIG_NET_CADENCE=y | |
| # CONFIG_ARM_AT91_ETHER is not set | |
| # CONFIG_MACB is not set | |
| CONFIG_NET_VENDOR_BROADCOM=y | |
| # CONFIG_B44 is not set | |
| # CONFIG_NET_CALXEDA_XGMAC is not set | |
| CONFIG_NET_VENDOR_CIRRUS=y | |
| # CONFIG_CS89x0 is not set | |
| # CONFIG_DM9000 is not set | |
| # CONFIG_DNET is not set | |
| CONFIG_NET_VENDOR_FARADAY=y | |
| # CONFIG_FTMAC100 is not set | |
| # CONFIG_FTGMAC100 is not set | |
| CONFIG_NET_VENDOR_INTEL=y | |
| CONFIG_NET_VENDOR_I825XX=y | |
| CONFIG_NET_VENDOR_MARVELL=y | |
| # CONFIG_MVMDIO is not set | |
| CONFIG_NET_VENDOR_MICREL=y | |
| # CONFIG_KS8851 is not set | |
| # CONFIG_KS8851_MLL is not set | |
| CONFIG_NET_VENDOR_MICROCHIP=y | |
| # CONFIG_ENC28J60 is not set | |
| CONFIG_NET_VENDOR_NATSEMI=y | |
| CONFIG_NET_VENDOR_8390=y | |
| # CONFIG_AX88796 is not set | |
| # CONFIG_ETHOC is not set | |
| CONFIG_NET_VENDOR_SEEQ=y | |
| CONFIG_NET_VENDOR_SMSC=y | |
| # CONFIG_SMC91X is not set | |
| # CONFIG_SMC911X is not set | |
| # CONFIG_SMSC911X is not set | |
| CONFIG_NET_VENDOR_STMICRO=y | |
| # CONFIG_STMMAC_ETH is not set | |
| CONFIG_NET_VENDOR_WIZNET=y | |
| # CONFIG_WIZNET_W5100 is not set | |
| # CONFIG_WIZNET_W5300 is not set | |
| # | |
| # MII PHY device drivers | |
| # | |
| # CONFIG_AT803X_PHY is not set | |
| # CONFIG_AMD_PHY is not set | |
| # CONFIG_MARVELL_PHY is not set | |
| # CONFIG_AMLOGIC_PHY is not set | |
| # CONFIG_DAVICOM_PHY is not set | |
| # CONFIG_QSEMI_PHY is not set | |
| # CONFIG_LXT_PHY is not set | |
| # CONFIG_CICADA_PHY is not set | |
| # CONFIG_VITESSE_PHY is not set | |
| # CONFIG_SMSC_PHY is not set | |
| # CONFIG_BROADCOM_PHY is not set | |
| # CONFIG_BCM87XX_PHY is not set | |
| # CONFIG_ICPLUS_PHY is not set | |
| # CONFIG_REALTEK_PHY is not set | |
| # CONFIG_NATIONAL_PHY is not set | |
| # CONFIG_STE10XP is not set | |
| # CONFIG_LSI_ET1011C_PHY is not set | |
| # CONFIG_MICREL_PHY is not set | |
| # CONFIG_FIXED_PHY is not set | |
| # CONFIG_MDIO_BITBANG is not set | |
| # CONFIG_MDIO_BUS_MUX_GPIO is not set | |
| # CONFIG_MDIO_BUS_MUX_MMIOREG is not set | |
| # CONFIG_MICREL_KS8995MA is not set | |
| CONFIG_PPP=y | |
| CONFIG_PPP_BSDCOMP=y | |
| CONFIG_PPP_DEFLATE=y | |
| CONFIG_PPP_FILTER=y | |
| CONFIG_PPP_MPPE=y | |
| CONFIG_PPP_MULTILINK=y | |
| # CONFIG_PPPOE is not set | |
| CONFIG_PPPOLAC=y | |
| CONFIG_PPPOPNS=y | |
| CONFIG_PPP_ASYNC=y | |
| CONFIG_PPP_SYNC_TTY=y | |
| # CONFIG_SLIP is not set | |
| CONFIG_SLHC=y | |
| # | |
| # USB Network Adapters | |
| # | |
| # CONFIG_USB_CATC is not set | |
| # CONFIG_USB_KAWETH is not set | |
| # CONFIG_USB_PEGASUS is not set | |
| # CONFIG_USB_RTL8150 is not set | |
| # CONFIG_USB_RTL8152 is not set | |
| CONFIG_USB_USBNET=y | |
| CONFIG_USB_NET_AX8817X=y | |
| CONFIG_USB_NET_AX88179_178A=y | |
| CONFIG_USB_NET_CDCETHER=y | |
| # CONFIG_USB_NET_CDC_EEM is not set | |
| CONFIG_USB_NET_CDC_NCM=y | |
| # CONFIG_USB_NET_CDC_MBIM is not set | |
| # CONFIG_USB_NET_DM9601 is not set | |
| # CONFIG_USB_NET_SMSC75XX is not set | |
| # CONFIG_USB_NET_SMSC95XX is not set | |
| # CONFIG_USB_NET_GL620A is not set | |
| CONFIG_USB_NET_NET1080=y | |
| # CONFIG_USB_NET_PLUSB is not set | |
| # CONFIG_USB_NET_MCS7830 is not set | |
| CONFIG_USB_NET_RNDIS_HOST=m | |
| CONFIG_USB_NET_CDC_SUBSET=y | |
| # CONFIG_USB_ALI_M5632 is not set | |
| # CONFIG_USB_AN2720 is not set | |
| CONFIG_USB_BELKIN=y | |
| CONFIG_USB_ARMLINUX=y | |
| # CONFIG_USB_EPSON2888 is not set | |
| # CONFIG_USB_KC2190 is not set | |
| CONFIG_USB_NET_ZAURUS=y | |
| # CONFIG_USB_NET_CX82310_ETH is not set | |
| # CONFIG_USB_NET_KALMIA is not set | |
| # CONFIG_USB_NET_QMI_WWAN is not set | |
| # CONFIG_USB_NET_INT51X1 is not set | |
| # CONFIG_USB_IPHETH is not set | |
| # CONFIG_USB_SIERRA_NET is not set | |
| # CONFIG_USB_VL600 is not set | |
| CONFIG_WLAN=y | |
| # CONFIG_LIBERTAS_THINFIRM is not set | |
| # CONFIG_AT76C50X_USB is not set | |
| CONFIG_USB_ZD1201=m | |
| CONFIG_USB_NET_RNDIS_WLAN=m | |
| CONFIG_RTL8187=m | |
| CONFIG_RTL8187_LEDS=y | |
| # CONFIG_MAC80211_HWSIM is not set | |
| # CONFIG_WIFI_CONTROL_FUNC is not set | |
| CONFIG_ATH_COMMON=m | |
| CONFIG_ATH_CARDS=m | |
| # CONFIG_ATH_DEBUG is not set | |
| CONFIG_ATH9K_HW=m | |
| CONFIG_ATH9K_COMMON=m | |
| CONFIG_ATH9K_BTCOEX_SUPPORT=y | |
| CONFIG_ATH9K=m | |
| CONFIG_ATH9K_AHB=y | |
| # CONFIG_ATH9K_DEBUGFS is not set | |
| # CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set | |
| CONFIG_ATH9K_HTC=m | |
| # CONFIG_ATH9K_HTC_DEBUGFS is not set | |
| CONFIG_CARL9170=m | |
| CONFIG_CARL9170_LEDS=y | |
| CONFIG_CARL9170_WPC=y | |
| CONFIG_CARL9170_HWRNG=y | |
| CONFIG_ATH6KL=m | |
| # CONFIG_ATH6KL_SDIO is not set | |
| CONFIG_ATH6KL_USB=m | |
| # CONFIG_ATH6KL_DEBUG is not set | |
| CONFIG_AR5523=m | |
| CONFIG_B43=m | |
| CONFIG_B43_SSB=y | |
| # CONFIG_B43_SDIO is not set | |
| CONFIG_B43_PIO=y | |
| CONFIG_B43_PHY_N=y | |
| CONFIG_B43_PHY_LP=y | |
| CONFIG_B43_LEDS=y | |
| CONFIG_B43_HWRNG=y | |
| # CONFIG_B43_DEBUG is not set | |
| # CONFIG_B43LEGACY is not set | |
| CONFIG_BRCMUTIL=m | |
| CONFIG_BRCMFMAC=m | |
| # CONFIG_BRCMFMAC_SDIO is not set | |
| CONFIG_BRCMFMAC_USB=y | |
| # CONFIG_BRCM_TRACING is not set | |
| # CONFIG_BRCMDBG is not set | |
| # CONFIG_HOSTAP is not set | |
| # CONFIG_LIBERTAS is not set | |
| CONFIG_P54_COMMON=m | |
| CONFIG_P54_USB=m | |
| # CONFIG_P54_SPI is not set | |
| CONFIG_P54_LEDS=y | |
| CONFIG_RT2X00=m | |
| CONFIG_RT2500USB=m | |
| CONFIG_RT73USB=m | |
| CONFIG_RT2800USB=m | |
| CONFIG_RT2800USB_RT33XX=y | |
| CONFIG_RT2800USB_RT35XX=y | |
| CONFIG_RT2800USB_RT53XX=y | |
| # CONFIG_RT2800USB_RT55XX is not set | |
| CONFIG_RT2800USB_UNKNOWN=y | |
| CONFIG_RT2800_LIB=m | |
| CONFIG_RT2X00_LIB_USB=m | |
| CONFIG_RT2X00_LIB=m | |
| CONFIG_RT2X00_LIB_FIRMWARE=y | |
| CONFIG_RT2X00_LIB_CRYPTO=y | |
| CONFIG_RT2X00_LIB_LEDS=y | |
| # CONFIG_RT2X00_DEBUG is not set | |
| # CONFIG_RTLWIFI is not set | |
| CONFIG_RTL8192C_COMMON=m | |
| # CONFIG_WL_TI is not set | |
| # CONFIG_ZD1211RW is not set | |
| # CONFIG_MWIFIEX is not set | |
| # | |
| # Enable WiMAX (Networking options) to see the WiMAX drivers | |
| # | |
| # CONFIG_WAN is not set | |
| # CONFIG_ISDN is not set | |
| # | |
| # Input device support | |
| # | |
| CONFIG_INPUT=y | |
| CONFIG_INPUT_FF_MEMLESS=y | |
| # CONFIG_INPUT_POLLDEV is not set | |
| # CONFIG_INPUT_SPARSEKMAP is not set | |
| # CONFIG_INPUT_MATRIXKMAP is not set | |
| # | |
| # Userland interfaces | |
| # | |
| CONFIG_INPUT_MOUSEDEV=y | |
| CONFIG_INPUT_MOUSEDEV_PSAUX=y | |
| CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | |
| CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | |
| CONFIG_INPUT_JOYDEV=y | |
| CONFIG_INPUT_EVDEV=y | |
| # CONFIG_INPUT_EVBUG is not set | |
| # CONFIG_INPUT_KEYRESET is not set | |
| # | |
| # Input Device Drivers | |
| # | |
| CONFIG_INPUT_KEYBOARD=y | |
| # CONFIG_KEYBOARD_ADP5588 is not set | |
| # CONFIG_KEYBOARD_ADP5589 is not set | |
| CONFIG_KEYBOARD_ATKBD=y | |
| # CONFIG_KEYBOARD_QT1070 is not set | |
| # CONFIG_KEYBOARD_QT2160 is not set | |
| # CONFIG_KEYBOARD_LKKBD is not set | |
| # CONFIG_KEYBOARD_GPIO is not set | |
| # CONFIG_KEYBOARD_TCA6416 is not set | |
| # CONFIG_KEYBOARD_TCA8418 is not set | |
| # CONFIG_KEYBOARD_MATRIX is not set | |
| # CONFIG_KEYBOARD_LM8323 is not set | |
| # CONFIG_KEYBOARD_LM8333 is not set | |
| # CONFIG_KEYBOARD_MAX7359 is not set | |
| # CONFIG_KEYBOARD_MCS is not set | |
| # CONFIG_KEYBOARD_MPR121 is not set | |
| # CONFIG_KEYBOARD_NEWTON is not set | |
| # CONFIG_KEYBOARD_OPENCORES is not set | |
| # CONFIG_KEYBOARD_SAMSUNG is not set | |
| # CONFIG_KEYBOARD_STOWAWAY is not set | |
| # CONFIG_KEYBOARD_SUNKBD is not set | |
| # CONFIG_KEYBOARD_XTKBD is not set | |
| CONFIG_INPUT_MOUSE=y | |
| CONFIG_MOUSE_PS2=y | |
| CONFIG_MOUSE_PS2_ALPS=y | |
| CONFIG_MOUSE_PS2_LOGIPS2PP=y | |
| CONFIG_MOUSE_PS2_SYNAPTICS=y | |
| CONFIG_MOUSE_PS2_CYPRESS=y | |
| CONFIG_MOUSE_PS2_TRACKPOINT=y | |
| # CONFIG_MOUSE_PS2_ELANTECH is not set | |
| # CONFIG_MOUSE_PS2_SENTELIC is not set | |
| # CONFIG_MOUSE_PS2_TOUCHKIT is not set | |
| # CONFIG_MOUSE_SERIAL is not set | |
| # CONFIG_MOUSE_APPLETOUCH is not set | |
| # CONFIG_MOUSE_BCM5974 is not set | |
| # CONFIG_MOUSE_CYAPA is not set | |
| # CONFIG_MOUSE_VSXXXAA is not set | |
| # CONFIG_MOUSE_GPIO is not set | |
| # CONFIG_MOUSE_SYNAPTICS_I2C is not set | |
| # CONFIG_MOUSE_SYNAPTICS_USB is not set | |
| CONFIG_INPUT_JOYSTICK=y | |
| CONFIG_JOYSTICK_ANALOG=y | |
| CONFIG_JOYSTICK_A3D=y | |
| CONFIG_JOYSTICK_ADI=y | |
| CONFIG_JOYSTICK_COBRA=y | |
| CONFIG_JOYSTICK_GF2K=y | |
| CONFIG_JOYSTICK_GRIP=y | |
| CONFIG_JOYSTICK_GRIP_MP=y | |
| CONFIG_JOYSTICK_GUILLEMOT=y | |
| CONFIG_JOYSTICK_INTERACT=y | |
| CONFIG_JOYSTICK_SIDEWINDER=y | |
| CONFIG_JOYSTICK_TMDC=y | |
| CONFIG_JOYSTICK_IFORCE=y | |
| CONFIG_JOYSTICK_IFORCE_USB=y | |
| CONFIG_JOYSTICK_IFORCE_232=y | |
| CONFIG_JOYSTICK_WARRIOR=y | |
| CONFIG_JOYSTICK_MAGELLAN=y | |
| CONFIG_JOYSTICK_SPACEORB=y | |
| CONFIG_JOYSTICK_SPACEBALL=y | |
| CONFIG_JOYSTICK_STINGER=y | |
| CONFIG_JOYSTICK_TWIDJOY=y | |
| CONFIG_JOYSTICK_ZHENHUA=y | |
| CONFIG_JOYSTICK_AS5011=y | |
| CONFIG_JOYSTICK_JOYDUMP=y | |
| CONFIG_JOYSTICK_XPAD=y | |
| CONFIG_JOYSTICK_XPAD_FF=y | |
| # CONFIG_JOYSTICK_XPAD_LEDS is not set | |
| # CONFIG_INPUT_TABLET is not set | |
| # CONFIG_INPUT_TOUCHSCREEN is not set | |
| CONFIG_INPUT_MISC=y | |
| # CONFIG_INPUT_AD714X is not set | |
| # CONFIG_INPUT_BMA150 is not set | |
| # CONFIG_INPUT_MMA8450 is not set | |
| # CONFIG_INPUT_MPU3050 is not set | |
| # CONFIG_INPUT_GP2A is not set | |
| # CONFIG_INPUT_GPIO_TILT_POLLED is not set | |
| # CONFIG_INPUT_ATI_REMOTE2 is not set | |
| # CONFIG_INPUT_KEYCHORD is not set | |
| # CONFIG_INPUT_KEYSPAN_REMOTE is not set | |
| # CONFIG_INPUT_KXTJ9 is not set | |
| # CONFIG_INPUT_POWERMATE is not set | |
| # CONFIG_INPUT_YEALINK is not set | |
| # CONFIG_INPUT_CM109 is not set | |
| CONFIG_INPUT_UINPUT=y | |
| # CONFIG_INPUT_GPIO is not set | |
| # CONFIG_INPUT_PCF8574 is not set | |
| # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set | |
| # CONFIG_INPUT_ADXL34X is not set | |
| # CONFIG_INPUT_IMS_PCU is not set | |
| # CONFIG_INPUT_CMA3000 is not set | |
| # | |
| # Hardware I/O ports | |
| # | |
| CONFIG_SERIO=y | |
| CONFIG_SERIO_SERPORT=y | |
| CONFIG_SERIO_LIBPS2=y | |
| # CONFIG_SERIO_RAW is not set | |
| # CONFIG_SERIO_ALTERA_PS2 is not set | |
| # CONFIG_SERIO_PS2MULT is not set | |
| # CONFIG_SERIO_ARC_PS2 is not set | |
| # CONFIG_SERIO_APBPS2 is not set | |
| CONFIG_GAMEPORT=y | |
| # CONFIG_GAMEPORT_NS558 is not set | |
| # CONFIG_GAMEPORT_L4 is not set | |
| # | |
| # Character devices | |
| # | |
| CONFIG_TTY=y | |
| CONFIG_VT=y | |
| CONFIG_CONSOLE_TRANSLATIONS=y | |
| CONFIG_VT_CONSOLE=y | |
| CONFIG_VT_CONSOLE_SLEEP=y | |
| CONFIG_HW_CONSOLE=y | |
| CONFIG_VT_HW_CONSOLE_BINDING=y | |
| CONFIG_UNIX98_PTYS=y | |
| # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set | |
| # CONFIG_LEGACY_PTYS is not set | |
| # CONFIG_SERIAL_NONSTANDARD is not set | |
| # CONFIG_N_GSM is not set | |
| # CONFIG_TRACE_SINK is not set | |
| CONFIG_DEVMEM=y | |
| CONFIG_DEVKMEM=y | |
| # | |
| # Serial drivers | |
| # | |
| # CONFIG_SERIAL_8250 is not set | |
| # | |
| # Non-8250 serial port support | |
| # | |
| # CONFIG_SERIAL_MAX3100 is not set | |
| # CONFIG_SERIAL_MAX310X is not set | |
| CONFIG_SERIAL_CORE=y | |
| CONFIG_SERIAL_CORE_CONSOLE=y | |
| # CONFIG_SERIAL_SCCNXP is not set | |
| # CONFIG_SERIAL_TIMBERDALE is not set | |
| # CONFIG_SERIAL_ALTERA_JTAGUART is not set | |
| # CONFIG_SERIAL_ALTERA_UART is not set | |
| # CONFIG_SERIAL_IFX6X60 is not set | |
| # CONFIG_SERIAL_XILINX_PS_UART is not set | |
| # CONFIG_SERIAL_ARC is not set | |
| CONFIG_TTY_PRINTK=y | |
| CONFIG_HVC_DRIVER=y | |
| CONFIG_HVC_DCC=y | |
| # CONFIG_IPMI_HANDLER is not set | |
| CONFIG_HW_RANDOM=m | |
| # CONFIG_HW_RANDOM_TIMERIOMEM is not set | |
| # CONFIG_HW_RANDOM_ATMEL is not set | |
| # CONFIG_HW_RANDOM_EXYNOS is not set | |
| # CONFIG_R3964 is not set | |
| # CONFIG_RAW_DRIVER is not set | |
| # CONFIG_TCG_TPM is not set | |
| # CONFIG_DCC_TTY is not set | |
| CONFIG_I2C=y | |
| CONFIG_I2C_BOARDINFO=y | |
| CONFIG_I2C_COMPAT=y | |
| CONFIG_I2C_CHARDEV=y | |
| # CONFIG_I2C_MUX is not set | |
| CONFIG_I2C_HELPER_AUTO=y | |
| CONFIG_I2C_ALGOBIT=y | |
| # | |
| # I2C Hardware Bus support | |
| # | |
| # | |
| # I2C system bus drivers (mostly embedded / system-on-chip) | |
| # | |
| # CONFIG_I2C_CBUS_GPIO is not set | |
| # CONFIG_I2C_DESIGNWARE_PLATFORM is not set | |
| # CONFIG_I2C_GPIO is not set | |
| # CONFIG_I2C_OCORES is not set | |
| # CONFIG_I2C_PCA_PLATFORM is not set | |
| # CONFIG_I2C_PXA_PCI is not set | |
| # CONFIG_I2C_SIMTEC is not set | |
| # CONFIG_I2C_XILINX is not set | |
| # | |
| # External I2C/SMBus adapter drivers | |
| # | |
| # CONFIG_I2C_DIOLAN_U2C is not set | |
| # CONFIG_I2C_PARPORT_LIGHT is not set | |
| # CONFIG_I2C_TAOS_EVM is not set | |
| # CONFIG_I2C_TINY_USB is not set | |
| # | |
| # Other I2C/SMBus bus drivers | |
| # | |
| # CONFIG_I2C_STUB is not set | |
| # CONFIG_I2C_DEBUG_CORE is not set | |
| # CONFIG_I2C_DEBUG_ALGO is not set | |
| # CONFIG_I2C_DEBUG_BUS is not set | |
| CONFIG_SPI=y | |
| # CONFIG_SPI_DEBUG is not set | |
| CONFIG_SPI_MASTER=y | |
| # | |
| # SPI Master Controller Drivers | |
| # | |
| # CONFIG_SPI_ALTERA is not set | |
| CONFIG_SPI_BITBANG=y | |
| CONFIG_SPI_GPIO=y | |
| # CONFIG_SPI_FSL_SPI is not set | |
| # CONFIG_SPI_OC_TINY is not set | |
| # CONFIG_SPI_PXA2XX_PCI is not set | |
| # CONFIG_SPI_SC18IS602 is not set | |
| # CONFIG_SPI_XCOMM is not set | |
| # CONFIG_SPI_XILINX is not set | |
| # CONFIG_SPI_DESIGNWARE is not set | |
| # | |
| # SPI Protocol Masters | |
| # | |
| CONFIG_SPI_SPIDEV=y | |
| # CONFIG_SPI_TLE62X0 is not set | |
| # | |
| # Qualcomm MSM SSBI bus support | |
| # | |
| # CONFIG_SSBI is not set | |
| # CONFIG_HSI is not set | |
| # | |
| # PPS support | |
| # | |
| # CONFIG_PPS is not set | |
| # | |
| # PPS generators support | |
| # | |
| # | |
| # PTP clock support | |
| # | |
| # CONFIG_PTP_1588_CLOCK is not set | |
| # | |
| # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. | |
| # | |
| # CONFIG_PTP_1588_CLOCK_PCH is not set | |
| CONFIG_PINCTRL=y | |
| # | |
| # Pin controllers | |
| # | |
| CONFIG_PINMUX=y | |
| CONFIG_PINCONF=y | |
| # CONFIG_DEBUG_PINCTRL is not set | |
| # CONFIG_PINCTRL_SINGLE is not set | |
| # CONFIG_PINCTRL_EXYNOS is not set | |
| # CONFIG_PINCTRL_EXYNOS5440 is not set | |
| CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y | |
| CONFIG_ARCH_REQUIRE_GPIOLIB=y | |
| CONFIG_GPIO_DEVRES=y | |
| CONFIG_GPIOLIB=y | |
| CONFIG_OF_GPIO=y | |
| # CONFIG_DEBUG_GPIO is not set | |
| # CONFIG_GPIO_SYSFS is not set | |
| # | |
| # Memory mapped GPIO drivers: | |
| # | |
| # CONFIG_GPIO_GENERIC_PLATFORM is not set | |
| # CONFIG_GPIO_EM is not set | |
| # CONFIG_GPIO_RCAR is not set | |
| # CONFIG_GPIO_TS5500 is not set | |
| # CONFIG_GPIO_GRGPIO is not set | |
| # | |
| # I2C GPIO expanders: | |
| # | |
| # CONFIG_GPIO_MAX7300 is not set | |
| # CONFIG_GPIO_MAX732X is not set | |
| # CONFIG_GPIO_PCF857X is not set | |
| # CONFIG_GPIO_SX150X is not set | |
| # CONFIG_GPIO_ADP5588 is not set | |
| # CONFIG_GPIO_ADNP is not set | |
| # | |
| # PCI GPIO expanders: | |
| # | |
| # | |
| # SPI GPIO expanders: | |
| # | |
| # CONFIG_GPIO_MAX7301 is not set | |
| # CONFIG_GPIO_MCP23S08 is not set | |
| # CONFIG_GPIO_MC33880 is not set | |
| # CONFIG_GPIO_74X164 is not set | |
| # | |
| # AC97 GPIO expanders: | |
| # | |
| # | |
| # MODULbus GPIO expanders: | |
| # | |
| # | |
| # USB GPIO expanders: | |
| # | |
| # CONFIG_W1 is not set | |
| CONFIG_POWER_SUPPLY=y | |
| # CONFIG_POWER_SUPPLY_DEBUG is not set | |
| # CONFIG_PDA_POWER is not set | |
| # CONFIG_TEST_POWER is not set | |
| # CONFIG_BATTERY_DS2780 is not set | |
| # CONFIG_BATTERY_DS2781 is not set | |
| # CONFIG_BATTERY_DS2782 is not set | |
| # CONFIG_BATTERY_SBS is not set | |
| # CONFIG_BATTERY_BQ27x00 is not set | |
| # CONFIG_BATTERY_MAX17040 is not set | |
| # CONFIG_BATTERY_MAX17042 is not set | |
| # CONFIG_BATTERY_ANDROID is not set | |
| # CONFIG_CHARGER_MAX8903 is not set | |
| # CONFIG_CHARGER_LP8727 is not set | |
| # CONFIG_CHARGER_GPIO is not set | |
| # CONFIG_CHARGER_MANAGER is not set | |
| # CONFIG_CHARGER_BQ2415X is not set | |
| # CONFIG_CHARGER_SMB347 is not set | |
| # CONFIG_BATTERY_GOLDFISH is not set | |
| # CONFIG_POWER_RESET is not set | |
| # CONFIG_POWER_RESET_RESTART is not set | |
| # CONFIG_POWER_AVS is not set | |
| CONFIG_HWMON=y | |
| # CONFIG_HWMON_VID is not set | |
| # CONFIG_HWMON_DEBUG_CHIP is not set | |
| # | |
| # Native drivers | |
| # | |
| # CONFIG_SENSORS_AD7314 is not set | |
| # CONFIG_SENSORS_AD7414 is not set | |
| # CONFIG_SENSORS_AD7418 is not set | |
| # CONFIG_SENSORS_ADCXX is not set | |
| # CONFIG_SENSORS_ADM1021 is not set | |
| # CONFIG_SENSORS_ADM1025 is not set | |
| # CONFIG_SENSORS_ADM1026 is not set | |
| # CONFIG_SENSORS_ADM1029 is not set | |
| # CONFIG_SENSORS_ADM1031 is not set | |
| # CONFIG_SENSORS_ADM9240 is not set | |
| # CONFIG_SENSORS_ADT7310 is not set | |
| # CONFIG_SENSORS_ADT7410 is not set | |
| # CONFIG_SENSORS_ADT7411 is not set | |
| # CONFIG_SENSORS_ADT7462 is not set | |
| # CONFIG_SENSORS_ADT7470 is not set | |
| # CONFIG_SENSORS_ADT7475 is not set | |
| # CONFIG_SENSORS_ASC7621 is not set | |
| # CONFIG_SENSORS_ATXP1 is not set | |
| # CONFIG_SENSORS_DS620 is not set | |
| # CONFIG_SENSORS_DS1621 is not set | |
| # CONFIG_SENSORS_F71805F is not set | |
| # CONFIG_SENSORS_F71882FG is not set | |
| # CONFIG_SENSORS_F75375S is not set | |
| # CONFIG_SENSORS_G760A is not set | |
| # CONFIG_SENSORS_GL518SM is not set | |
| # CONFIG_SENSORS_GL520SM is not set | |
| # CONFIG_SENSORS_GPIO_FAN is not set | |
| # CONFIG_SENSORS_HIH6130 is not set | |
| # CONFIG_SENSORS_IT87 is not set | |
| # CONFIG_SENSORS_JC42 is not set | |
| # CONFIG_SENSORS_LINEAGE is not set | |
| # CONFIG_SENSORS_LM63 is not set | |
| # CONFIG_SENSORS_LM70 is not set | |
| # CONFIG_SENSORS_LM73 is not set | |
| # CONFIG_SENSORS_LM75 is not set | |
| # CONFIG_SENSORS_LM77 is not set | |
| # CONFIG_SENSORS_LM78 is not set | |
| # CONFIG_SENSORS_LM80 is not set | |
| # CONFIG_SENSORS_LM83 is not set | |
| # CONFIG_SENSORS_LM85 is not set | |
| # CONFIG_SENSORS_LM87 is not set | |
| # CONFIG_SENSORS_LM90 is not set | |
| # CONFIG_SENSORS_LM92 is not set | |
| # CONFIG_SENSORS_LM93 is not set | |
| # CONFIG_SENSORS_LTC4151 is not set | |
| # CONFIG_SENSORS_LTC4215 is not set | |
| # CONFIG_SENSORS_LTC4245 is not set | |
| # CONFIG_SENSORS_LTC4261 is not set | |
| # CONFIG_SENSORS_LM95234 is not set | |
| # CONFIG_SENSORS_LM95241 is not set | |
| # CONFIG_SENSORS_LM95245 is not set | |
| # CONFIG_SENSORS_MAX1111 is not set | |
| # CONFIG_SENSORS_MAX16065 is not set | |
| # CONFIG_SENSORS_MAX1619 is not set | |
| # CONFIG_SENSORS_MAX1668 is not set | |
| # CONFIG_SENSORS_MAX197 is not set | |
| # CONFIG_SENSORS_MAX6639 is not set | |
| # CONFIG_SENSORS_MAX6642 is not set | |
| # CONFIG_SENSORS_MAX6650 is not set | |
| # CONFIG_SENSORS_MAX6697 is not set | |
| # CONFIG_SENSORS_MCP3021 is not set | |
| # CONFIG_SENSORS_NCT6775 is not set | |
| # CONFIG_SENSORS_NTC_THERMISTOR is not set | |
| # CONFIG_SENSORS_PC87360 is not set | |
| # CONFIG_SENSORS_PC87427 is not set | |
| # CONFIG_SENSORS_PCF8591 is not set | |
| # CONFIG_PMBUS is not set | |
| # CONFIG_SENSORS_SHT15 is not set | |
| # CONFIG_SENSORS_SHT21 is not set | |
| # CONFIG_SENSORS_SMM665 is not set | |
| # CONFIG_SENSORS_DME1737 is not set | |
| # CONFIG_SENSORS_EMC1403 is not set | |
| # CONFIG_SENSORS_EMC2103 is not set | |
| # CONFIG_SENSORS_EMC6W201 is not set | |
| # CONFIG_SENSORS_SMSC47M1 is not set | |
| # CONFIG_SENSORS_SMSC47M192 is not set | |
| # CONFIG_SENSORS_SMSC47B397 is not set | |
| # CONFIG_SENSORS_SCH56XX_COMMON is not set | |
| # CONFIG_SENSORS_ADS1015 is not set | |
| # CONFIG_SENSORS_ADS7828 is not set | |
| # CONFIG_SENSORS_ADS7871 is not set | |
| # CONFIG_SENSORS_AMC6821 is not set | |
| # CONFIG_SENSORS_INA209 is not set | |
| # CONFIG_SENSORS_INA2XX is not set | |
| # CONFIG_SENSORS_THMC50 is not set | |
| # CONFIG_SENSORS_TMP102 is not set | |
| # CONFIG_SENSORS_TMP401 is not set | |
| # CONFIG_SENSORS_TMP421 is not set | |
| # CONFIG_SENSORS_VT1211 is not set | |
| # CONFIG_SENSORS_W83781D is not set | |
| # CONFIG_SENSORS_W83791D is not set | |
| # CONFIG_SENSORS_W83792D is not set | |
| # CONFIG_SENSORS_W83793 is not set | |
| # CONFIG_SENSORS_W83795 is not set | |
| # CONFIG_SENSORS_W83L785TS is not set | |
| # CONFIG_SENSORS_W83L786NG is not set | |
| # CONFIG_SENSORS_W83627HF is not set | |
| # CONFIG_SENSORS_W83627EHF is not set | |
| # CONFIG_THERMAL is not set | |
| # CONFIG_WATCHDOG is not set | |
| CONFIG_SSB_POSSIBLE=y | |
| # | |
| # Sonics Silicon Backplane | |
| # | |
| CONFIG_SSB=m | |
| CONFIG_SSB_BLOCKIO=y | |
| CONFIG_SSB_SDIOHOST_POSSIBLE=y | |
| # CONFIG_SSB_SDIOHOST is not set | |
| # CONFIG_SSB_SILENT is not set | |
| # CONFIG_SSB_DEBUG is not set | |
| # CONFIG_SSB_DRIVER_GPIO is not set | |
| CONFIG_BCMA_POSSIBLE=y | |
| # | |
| # Broadcom specific AMBA | |
| # | |
| # CONFIG_BCMA is not set | |
| # | |
| # Multifunction device drivers | |
| # | |
| CONFIG_MFD_CORE=m | |
| # CONFIG_MFD_AS3711 is not set | |
| # CONFIG_PMIC_ADP5520 is not set | |
| # CONFIG_MFD_AAT2870_CORE is not set | |
| # CONFIG_MFD_CROS_EC is not set | |
| # CONFIG_MFD_ASIC3 is not set | |
| # CONFIG_PMIC_DA903X is not set | |
| # CONFIG_MFD_DA9052_SPI is not set | |
| # CONFIG_MFD_DA9052_I2C is not set | |
| # CONFIG_MFD_DA9055 is not set | |
| # CONFIG_MFD_MC13XXX_SPI is not set | |
| # CONFIG_MFD_MC13XXX_I2C is not set | |
| # CONFIG_HTC_EGPIO is not set | |
| # CONFIG_HTC_PASIC3 is not set | |
| # CONFIG_HTC_I2CPLD is not set | |
| # CONFIG_MFD_88PM800 is not set | |
| # CONFIG_MFD_88PM805 is not set | |
| # CONFIG_MFD_88PM860X is not set | |
| # CONFIG_MFD_MAX77686 is not set | |
| # CONFIG_MFD_MAX77693 is not set | |
| # CONFIG_MFD_MAX8907 is not set | |
| # CONFIG_MFD_MAX8925 is not set | |
| # CONFIG_MFD_MAX8997 is not set | |
| # CONFIG_MFD_MAX8998 is not set | |
| # CONFIG_EZX_PCAP is not set | |
| # CONFIG_MFD_VIPERBOARD is not set | |
| # CONFIG_MFD_RETU is not set | |
| # CONFIG_MFD_PCF50633 is not set | |
| # CONFIG_MFD_RC5T583 is not set | |
| # CONFIG_MFD_SEC_CORE is not set | |
| # CONFIG_MFD_SI476X_CORE is not set | |
| # CONFIG_MFD_SM501 is not set | |
| # CONFIG_MFD_SMSC is not set | |
| # CONFIG_ABX500_CORE is not set | |
| # CONFIG_MFD_STMPE is not set | |
| # CONFIG_MFD_SYSCON is not set | |
| # CONFIG_MFD_TI_AM335X_TSCADC is not set | |
| # CONFIG_MFD_LP8788 is not set | |
| # CONFIG_MFD_PALMAS is not set | |
| # CONFIG_TPS6105X is not set | |
| # CONFIG_TPS65010 is not set | |
| # CONFIG_TPS6507X is not set | |
| # CONFIG_MFD_TPS65090 is not set | |
| # CONFIG_MFD_TPS65217 is not set | |
| # CONFIG_MFD_TPS6586X is not set | |
| # CONFIG_MFD_TPS65910 is not set | |
| # CONFIG_MFD_TPS65912 is not set | |
| # CONFIG_MFD_TPS65912_I2C is not set | |
| # CONFIG_MFD_TPS65912_SPI is not set | |
| # CONFIG_MFD_TPS80031 is not set | |
| # CONFIG_TWL4030_CORE is not set | |
| # CONFIG_TWL6040_CORE is not set | |
| # CONFIG_MFD_WL1273_CORE is not set | |
| # CONFIG_MFD_LM3533 is not set | |
| # CONFIG_MFD_TC3589X is not set | |
| # CONFIG_MFD_TMIO is not set | |
| # CONFIG_MFD_T7L66XB is not set | |
| # CONFIG_MFD_TC6387XB is not set | |
| # CONFIG_MFD_TC6393XB is not set | |
| # CONFIG_MFD_ARIZONA_I2C is not set | |
| # CONFIG_MFD_ARIZONA_SPI is not set | |
| # CONFIG_MFD_WM8400 is not set | |
| # CONFIG_MFD_WM831X_I2C is not set | |
| # CONFIG_MFD_WM831X_SPI is not set | |
| # CONFIG_MFD_WM8350_I2C is not set | |
| # CONFIG_MFD_WM8994 is not set | |
| CONFIG_REGULATOR=y | |
| # CONFIG_REGULATOR_DEBUG is not set | |
| # CONFIG_REGULATOR_DUMMY is not set | |
| # CONFIG_REGULATOR_FIXED_VOLTAGE is not set | |
| # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set | |
| # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set | |
| # CONFIG_REGULATOR_GPIO is not set | |
| # CONFIG_REGULATOR_AD5398 is not set | |
| # CONFIG_REGULATOR_FAN53555 is not set | |
| # CONFIG_REGULATOR_ISL6271A is not set | |
| # CONFIG_REGULATOR_MAX1586 is not set | |
| # CONFIG_REGULATOR_MAX8649 is not set | |
| # CONFIG_REGULATOR_MAX8660 is not set | |
| # CONFIG_REGULATOR_MAX8952 is not set | |
| # CONFIG_REGULATOR_MAX8973 is not set | |
| # CONFIG_REGULATOR_LP3971 is not set | |
| # CONFIG_REGULATOR_LP3972 is not set | |
| # CONFIG_REGULATOR_LP872X is not set | |
| # CONFIG_REGULATOR_LP8755 is not set | |
| # CONFIG_REGULATOR_TPS51632 is not set | |
| # CONFIG_REGULATOR_TPS62360 is not set | |
| # CONFIG_REGULATOR_TPS65023 is not set | |
| # CONFIG_REGULATOR_TPS6507X is not set | |
| # CONFIG_REGULATOR_TPS6524X is not set | |
| CONFIG_MEDIA_SUPPORT=y | |
| # | |
| # Multimedia core support | |
| # | |
| # CONFIG_MEDIA_CAMERA_SUPPORT is not set | |
| # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set | |
| CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y | |
| # CONFIG_MEDIA_RADIO_SUPPORT is not set | |
| # CONFIG_MEDIA_RC_SUPPORT is not set | |
| # CONFIG_VIDEO_ADV_DEBUG is not set | |
| # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set | |
| CONFIG_VIDEOBUF_GEN=m | |
| CONFIG_VIDEOBUF_VMALLOC=m | |
| CONFIG_DVB_CORE=y | |
| CONFIG_DVB_NET=y | |
| # CONFIG_TTPCI_EEPROM is not set | |
| CONFIG_DVB_MAX_ADAPTERS=8 | |
| # CONFIG_DVB_DYNAMIC_MINORS is not set | |
| # | |
| # Media drivers | |
| # | |
| CONFIG_MEDIA_USB_SUPPORT=y | |
| # | |
| # Analog/digital TV USB devices | |
| # | |
| CONFIG_VIDEO_AU0828=m | |
| # | |
| # Digital TV USB devices | |
| # | |
| CONFIG_DVB_USB_V2=m | |
| CONFIG_DVB_USB_AF9015=m | |
| CONFIG_DVB_USB_AF9035=m | |
| CONFIG_DVB_USB_ANYSEE=m | |
| # CONFIG_DVB_USB_AU6610 is not set | |
| CONFIG_DVB_USB_AZ6007=m | |
| CONFIG_DVB_USB_CE6230=m | |
| CONFIG_DVB_USB_EC168=m | |
| CONFIG_DVB_USB_GL861=m | |
| CONFIG_DVB_USB_IT913X=m | |
| CONFIG_DVB_USB_MXL111SF=m | |
| CONFIG_DVB_USB_RTL28XXU=m | |
| CONFIG_SMS_USB_DRV=m | |
| CONFIG_DVB_B2C2_FLEXCOP_USB=m | |
| # CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set | |
| # | |
| # Webcam, TV (analog/digital) USB devices | |
| # | |
| # | |
| # Supported MMC/SDIO adapters | |
| # | |
| # CONFIG_SMS_SDIO_DRV is not set | |
| CONFIG_MEDIA_COMMON_OPTIONS=y | |
| # | |
| # common driver options | |
| # | |
| CONFIG_VIDEO_TVEEPROM=m | |
| CONFIG_CYPRESS_FIRMWARE=m | |
| CONFIG_DVB_B2C2_FLEXCOP=m | |
| CONFIG_SMS_SIANO_MDTV=m | |
| # CONFIG_SMS_SIANO_DEBUGFS is not set | |
| # | |
| # Media ancillary drivers (tuners, sensors, i2c, frontends) | |
| # | |
| CONFIG_MEDIA_SUBDRV_AUTOSELECT=y | |
| CONFIG_MEDIA_ATTACH=y | |
| CONFIG_MEDIA_TUNER_SIMPLE=m | |
| CONFIG_MEDIA_TUNER_TDA18271=m | |
| CONFIG_MEDIA_TUNER_TDA9887=m | |
| CONFIG_MEDIA_TUNER_MT2060=m | |
| CONFIG_MEDIA_TUNER_MT2063=m | |
| CONFIG_MEDIA_TUNER_QT1010=m | |
| CONFIG_MEDIA_TUNER_XC5000=m | |
| CONFIG_MEDIA_TUNER_MXL5005S=m | |
| CONFIG_MEDIA_TUNER_MXL5007T=m | |
| CONFIG_MEDIA_TUNER_MC44S803=m | |
| CONFIG_MEDIA_TUNER_TDA18218=m | |
| CONFIG_MEDIA_TUNER_FC0011=m | |
| CONFIG_MEDIA_TUNER_FC0012=m | |
| CONFIG_MEDIA_TUNER_FC0013=m | |
| CONFIG_MEDIA_TUNER_TDA18212=m | |
| CONFIG_MEDIA_TUNER_E4000=m | |
| CONFIG_MEDIA_TUNER_FC2580=m | |
| CONFIG_MEDIA_TUNER_TUA9001=m | |
| CONFIG_MEDIA_TUNER_IT913X=m | |
| CONFIG_MEDIA_TUNER_R820T=m | |
| # | |
| # Multistandard (satellite) frontends | |
| # | |
| # | |
| # Multistandard (cable + terrestrial) frontends | |
| # | |
| CONFIG_DVB_DRXK=m | |
| # | |
| # DVB-S (satellite) frontends | |
| # | |
| CONFIG_DVB_CX24123=m | |
| CONFIG_DVB_MT312=m | |
| CONFIG_DVB_S5H1420=m | |
| CONFIG_DVB_STV0299=m | |
| CONFIG_DVB_STV6110=m | |
| CONFIG_DVB_STV0900=m | |
| CONFIG_DVB_TUNER_ITD1000=m | |
| CONFIG_DVB_TUNER_CX24113=m | |
| CONFIG_DVB_CX24116=m | |
| # | |
| # DVB-T (terrestrial) frontends | |
| # | |
| CONFIG_DVB_MT352=m | |
| CONFIG_DVB_ZL10353=m | |
| CONFIG_DVB_AF9013=m | |
| CONFIG_DVB_EC100=m | |
| CONFIG_DVB_CXD2820R=m | |
| CONFIG_DVB_RTL2830=m | |
| CONFIG_DVB_RTL2832=m | |
| # | |
| # DVB-C (cable) frontends | |
| # | |
| CONFIG_DVB_TDA10023=m | |
| CONFIG_DVB_STV0297=m | |
| # | |
| # ATSC (North American/Korean Terrestrial/Cable DTV) frontends | |
| # | |
| CONFIG_DVB_NXT200X=m | |
| CONFIG_DVB_BCM3510=m | |
| CONFIG_DVB_LGDT330X=m | |
| CONFIG_DVB_LGDT3305=m | |
| CONFIG_DVB_LG2160=m | |
| CONFIG_DVB_AU8522=m | |
| CONFIG_DVB_AU8522_DTV=m | |
| # | |
| # ISDB-T (terrestrial) frontends | |
| # | |
| # | |
| # Digital terrestrial only tuners/PLL | |
| # | |
| CONFIG_DVB_PLL=m | |
| # | |
| # SEC control devices for DVB-S | |
| # | |
| CONFIG_DVB_ISL6421=m | |
| CONFIG_DVB_ISL6423=m | |
| CONFIG_DVB_IT913X_FE=m | |
| CONFIG_DVB_AF9033=m | |
| # | |
| # Tools to develop new frontends | |
| # | |
| # CONFIG_DVB_DUMMY_FE is not set | |
| # | |
| # Graphics support | |
| # | |
| # CONFIG_DRM is not set | |
| CONFIG_ION=y | |
| # CONFIG_VGASTATE is not set | |
| # CONFIG_VIDEO_OUTPUT_CONTROL is not set | |
| CONFIG_FB=y | |
| # CONFIG_FIRMWARE_EDID is not set | |
| # CONFIG_FB_DDC is not set | |
| # CONFIG_FB_BOOT_VESA_SUPPORT is not set | |
| CONFIG_FB_CFB_FILLRECT=y | |
| CONFIG_FB_CFB_COPYAREA=y | |
| CONFIG_FB_CFB_IMAGEBLIT=y | |
| # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | |
| CONFIG_FB_SYS_FILLRECT=m | |
| CONFIG_FB_SYS_COPYAREA=m | |
| CONFIG_FB_SYS_IMAGEBLIT=m | |
| # CONFIG_FB_FOREIGN_ENDIAN is not set | |
| CONFIG_FB_SYS_FOPS=m | |
| CONFIG_FB_DEFERRED_IO=y | |
| # CONFIG_FB_SVGALIB is not set | |
| # CONFIG_FB_MACMODES is not set | |
| # CONFIG_FB_BACKLIGHT is not set | |
| # CONFIG_FB_MODE_HELPERS is not set | |
| # CONFIG_FB_TILEBLITTING is not set | |
| # | |
| # Frame buffer hardware drivers | |
| # | |
| # CONFIG_FB_S1D13XXX is not set | |
| # CONFIG_FB_TMIO is not set | |
| # CONFIG_FB_SMSCUFX is not set | |
| # CONFIG_FB_UDL is not set | |
| # CONFIG_FB_GOLDFISH is not set | |
| # CONFIG_FB_VIRTUAL is not set | |
| # CONFIG_FB_METRONOME is not set | |
| # CONFIG_FB_BROADSHEET is not set | |
| # CONFIG_FB_AUO_K190X is not set | |
| # CONFIG_FB_SIMPLE is not set | |
| # CONFIG_EXYNOS_VIDEO is not set | |
| CONFIG_BACKLIGHT_LCD_SUPPORT=y | |
| CONFIG_LCD_CLASS_DEVICE=m | |
| # CONFIG_LCD_L4F00242T03 is not set | |
| # CONFIG_LCD_LMS283GF05 is not set | |
| # CONFIG_LCD_LTV350QV is not set | |
| # CONFIG_LCD_ILI922X is not set | |
| # CONFIG_LCD_ILI9320 is not set | |
| # CONFIG_LCD_TDO24M is not set | |
| # CONFIG_LCD_VGG2432A4 is not set | |
| # CONFIG_LCD_PLATFORM is not set | |
| # CONFIG_LCD_S6E63M0 is not set | |
| # CONFIG_LCD_LD9040 is not set | |
| # CONFIG_LCD_AMS369FG06 is not set | |
| # CONFIG_LCD_LMS501KF03 is not set | |
| # CONFIG_LCD_HX8357 is not set | |
| CONFIG_BACKLIGHT_CLASS_DEVICE=y | |
| CONFIG_BACKLIGHT_GENERIC=y | |
| # CONFIG_BACKLIGHT_ADP8860 is not set | |
| # CONFIG_BACKLIGHT_ADP8870 is not set | |
| # CONFIG_BACKLIGHT_LM3630 is not set | |
| # CONFIG_BACKLIGHT_LM3639 is not set | |
| # CONFIG_BACKLIGHT_LP855X is not set | |
| # | |
| # Console display driver support | |
| # | |
| CONFIG_DUMMY_CONSOLE=y | |
| CONFIG_FRAMEBUFFER_CONSOLE=m | |
| CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y | |
| # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | |
| CONFIG_FONTS=y | |
| CONFIG_FONT_8x8=y | |
| CONFIG_FONT_8x16=y | |
| # CONFIG_FONT_6x11 is not set | |
| # CONFIG_FONT_7x14 is not set | |
| # CONFIG_FONT_PEARL_8x8 is not set | |
| # CONFIG_FONT_ACORN_8x8 is not set | |
| # CONFIG_FONT_MINI_4x6 is not set | |
| # CONFIG_FONT_SUN8x16 is not set | |
| # CONFIG_FONT_SUN12x22 is not set | |
| # CONFIG_FONT_10x18 is not set | |
| # CONFIG_LOGO is not set | |
| # CONFIG_FB_SSD1307 is not set | |
| CONFIG_SOUND=y | |
| # CONFIG_SOUND_OSS_CORE is not set | |
| CONFIG_SND=y | |
| CONFIG_SND_TIMER=y | |
| CONFIG_SND_PCM=y | |
| CONFIG_SND_HWDEP=y | |
| CONFIG_SND_RAWMIDI=y | |
| CONFIG_SND_COMPRESS_OFFLOAD=y | |
| CONFIG_SND_JACK=y | |
| # CONFIG_SND_SEQUENCER is not set | |
| # CONFIG_SND_MIXER_OSS is not set | |
| # CONFIG_SND_PCM_OSS is not set | |
| # CONFIG_SND_HRTIMER is not set | |
| # CONFIG_SND_DYNAMIC_MINORS is not set | |
| CONFIG_SND_SUPPORT_OLD_API=y | |
| CONFIG_SND_VERBOSE_PROCFS=y | |
| CONFIG_SND_VERBOSE_PRINTK=y | |
| CONFIG_SND_DEBUG=y | |
| CONFIG_SND_DEBUG_VERBOSE=y | |
| CONFIG_SND_PCM_XRUN_DEBUG=y | |
| # CONFIG_SND_RAWMIDI_SEQ is not set | |
| # CONFIG_SND_OPL3_LIB_SEQ is not set | |
| # CONFIG_SND_OPL4_LIB_SEQ is not set | |
| # CONFIG_SND_SBAWE_SEQ is not set | |
| # CONFIG_SND_EMU10K1_SEQ is not set | |
| CONFIG_SND_DRIVERS=y | |
| # CONFIG_SND_DUMMY is not set | |
| # CONFIG_SND_ALOOP is not set | |
| # CONFIG_SND_MTPAV is not set | |
| # CONFIG_SND_SERIAL_U16550 is not set | |
| # CONFIG_SND_MPU401 is not set | |
| CONFIG_SND_ARM=y | |
| CONFIG_SND_SPI=y | |
| CONFIG_SND_USB=y | |
| CONFIG_SND_USB_AUDIO=y | |
| # CONFIG_SND_USB_UA101 is not set | |
| # CONFIG_SND_USB_CAIAQ is not set | |
| # CONFIG_SND_USB_6FIRE is not set | |
| CONFIG_SND_SOC=y | |
| # CONFIG_SND_ATMEL_SOC is not set | |
| # CONFIG_SND_DESIGNWARE_I2S is not set | |
| CONFIG_SND_AML_M6_SOC=y | |
| # CONFIG_SND_AML_M8_SOC is not set | |
| # CONFIG_SND_AML_M6_RT5631 is not set | |
| # CONFIG_SND_AML_M6_RT5616 is not set | |
| # CONFIG_SND_AML_M6_RT3261 is not set | |
| # CONFIG_SND_AML_M6_WM8960 is not set | |
| # CONFIG_SND_AML_M6_PCM2BT is not set | |
| CONFIG_SND_AML_M_DUMMY_CODEC=y | |
| # CONFIG_SND_AML_M6TV_AUDIO_CODEC is not set | |
| CONFIG_SND_SOC_I2C_AND_SPI=y | |
| # CONFIG_SND_SOC_ALL_CODECS is not set | |
| CONFIG_SND_SOC_DUMMY_CODEC=y | |
| # CONFIG_SND_SIMPLE_CARD is not set | |
| # CONFIG_SOUND_PRIME is not set | |
| # | |
| # HID support | |
| # | |
| CONFIG_HID=y | |
| CONFIG_HID_BATTERY_STRENGTH=y | |
| CONFIG_HIDRAW=y | |
| # CONFIG_UHID is not set | |
| CONFIG_HID_GENERIC=y | |
| # | |
| # Special HID drivers | |
| # | |
| CONFIG_HID_A4TECH=m | |
| CONFIG_HID_ACRUX=m | |
| CONFIG_HID_ACRUX_FF=y | |
| CONFIG_HID_APPLE=m | |
| CONFIG_HID_APPLEIR=m | |
| CONFIG_HID_AUREAL=m | |
| CONFIG_HID_BELKIN=m | |
| CONFIG_HID_CHERRY=m | |
| CONFIG_HID_CHICONY=m | |
| CONFIG_HID_PRODIKEYS=m | |
| CONFIG_HID_CYPRESS=m | |
| CONFIG_HID_DRAGONRISE=m | |
| CONFIG_DRAGONRISE_FF=y | |
| CONFIG_HID_EMS_FF=m | |
| CONFIG_HID_ELECOM=m | |
| CONFIG_HID_EZKEY=m | |
| CONFIG_HID_HOLTEK=m | |
| CONFIG_HOLTEK_FF=y | |
| CONFIG_HID_KEYTOUCH=m | |
| CONFIG_HID_KYE=m | |
| CONFIG_HID_UCLOGIC=m | |
| CONFIG_HID_WALTOP=m | |
| CONFIG_HID_GYRATION=m | |
| CONFIG_HID_ICADE=m | |
| CONFIG_HID_TWINHAN=m | |
| CONFIG_HID_KENSINGTON=m | |
| CONFIG_HID_LCPOWER=m | |
| CONFIG_HID_LENOVO_TPKBD=m | |
| CONFIG_HID_LOGITECH=m | |
| CONFIG_HID_LOGITECH_DJ=m | |
| CONFIG_LOGITECH_FF=y | |
| CONFIG_LOGIRUMBLEPAD2_FF=y | |
| CONFIG_LOGIG940_FF=y | |
| CONFIG_LOGIWHEELS_FF=y | |
| CONFIG_HID_MAGICMOUSE=m | |
| CONFIG_HID_MICROSOFT=m | |
| CONFIG_HID_MONTEREY=m | |
| CONFIG_HID_MULTITOUCH=m | |
| CONFIG_HID_NTRIG=m | |
| CONFIG_HID_ORTEK=m | |
| CONFIG_HID_PANTHERLORD=m | |
| CONFIG_PANTHERLORD_FF=y | |
| CONFIG_HID_PETALYNX=m | |
| CONFIG_HID_PICOLCD=m | |
| CONFIG_HID_PICOLCD_FB=y | |
| CONFIG_HID_PICOLCD_BACKLIGHT=y | |
| CONFIG_HID_PICOLCD_LCD=y | |
| CONFIG_HID_PICOLCD_LEDS=y | |
| CONFIG_HID_PRIMAX=m | |
| CONFIG_HID_PS3REMOTE=m | |
| CONFIG_HID_ROCCAT=m | |
| CONFIG_HID_SAITEK=m | |
| CONFIG_HID_SAMSUNG=m | |
| CONFIG_HID_SONY=m | |
| CONFIG_HID_SPEEDLINK=m | |
| CONFIG_HID_STEELSERIES=m | |
| CONFIG_HID_SUNPLUS=m | |
| CONFIG_HID_GREENASIA=m | |
| CONFIG_GREENASIA_FF=y | |
| CONFIG_HID_SMARTJOYPLUS=m | |
| CONFIG_SMARTJOYPLUS_FF=y | |
| CONFIG_HID_TIVO=m | |
| CONFIG_HID_TOPSEED=m | |
| CONFIG_HID_THINGM=m | |
| CONFIG_HID_THRUSTMASTER=m | |
| CONFIG_THRUSTMASTER_FF=y | |
| CONFIG_HID_WACOM=m | |
| CONFIG_HID_WIIMOTE=m | |
| CONFIG_HID_WIIMOTE_EXT=y | |
| CONFIG_HID_ZEROPLUS=m | |
| CONFIG_ZEROPLUS_FF=y | |
| CONFIG_HID_ZYDACRON=m | |
| CONFIG_HID_SENSOR_HUB=m | |
| # | |
| # USB HID support | |
| # | |
| CONFIG_USB_HID=y | |
| # CONFIG_HID_PID is not set | |
| CONFIG_USB_HIDDEV=y | |
| # | |
| # I2C HID support | |
| # | |
| # CONFIG_I2C_HID is not set | |
| # CONFIG_USB_ARCH_HAS_OHCI is not set | |
| # CONFIG_USB_ARCH_HAS_EHCI is not set | |
| # CONFIG_USB_ARCH_HAS_XHCI is not set | |
| CONFIG_USB_SUPPORT=y | |
| CONFIG_USB_COMMON=y | |
| CONFIG_USB_ARCH_HAS_HCD=y | |
| CONFIG_USB=y | |
| # CONFIG_USB_DEBUG is not set | |
| CONFIG_USB_ANNOUNCE_NEW_DEVICES=y | |
| # | |
| # Miscellaneous USB options | |
| # | |
| CONFIG_USB_DEFAULT_PERSIST=y | |
| # CONFIG_USB_DYNAMIC_MINORS is not set | |
| # CONFIG_USB_OTG is not set | |
| # CONFIG_USB_OTG_WHITELIST is not set | |
| # CONFIG_USB_OTG_BLACKLIST_HUB is not set | |
| # CONFIG_USB_MON is not set | |
| # CONFIG_USB_WUSB_CBAF is not set | |
| # | |
| # USB Host Controller Drivers | |
| # | |
| # CONFIG_USB_C67X00_HCD is not set | |
| # CONFIG_USB_OXU210HP_HCD is not set | |
| # CONFIG_USB_ISP116X_HCD is not set | |
| # CONFIG_USB_ISP1760_HCD is not set | |
| # CONFIG_USB_ISP1362_HCD is not set | |
| # CONFIG_USB_SL811_HCD is not set | |
| # CONFIG_USB_R8A66597_HCD is not set | |
| # CONFIG_USB_HCD_SSB is not set | |
| # | |
| # USB Device Class drivers | |
| # | |
| CONFIG_USB_ACM=y | |
| # CONFIG_USB_PRINTER is not set | |
| # CONFIG_USB_WDM is not set | |
| # CONFIG_USB_TMC is not set | |
| # | |
| # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may | |
| # | |
| # | |
| # also be needed; see USB_STORAGE Help for more info | |
| # | |
| CONFIG_USB_STORAGE=y | |
| # CONFIG_USB_STORAGE_DEBUG is not set | |
| # CONFIG_USB_STORAGE_REALTEK is not set | |
| # CONFIG_USB_STORAGE_DATAFAB is not set | |
| # CONFIG_USB_STORAGE_FREECOM is not set | |
| # CONFIG_USB_STORAGE_ISD200 is not set | |
| # CONFIG_USB_STORAGE_USBAT is not set | |
| # CONFIG_USB_STORAGE_SDDR09 is not set | |
| # CONFIG_USB_STORAGE_SDDR55 is not set | |
| # CONFIG_USB_STORAGE_JUMPSHOT is not set | |
| # CONFIG_USB_STORAGE_ALAUDA is not set | |
| # CONFIG_USB_STORAGE_ONETOUCH is not set | |
| # CONFIG_USB_STORAGE_KARMA is not set | |
| # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set | |
| # CONFIG_USB_STORAGE_ENE_UB6250 is not set | |
| # | |
| # USB Imaging devices | |
| # | |
| # CONFIG_USB_MDC800 is not set | |
| # CONFIG_USB_MICROTEK is not set | |
| # CONFIG_USB_DWC3 is not set | |
| # CONFIG_USB_CHIPIDEA is not set | |
| # | |
| # USB port drivers | |
| # | |
| CONFIG_USB_SERIAL=y | |
| # CONFIG_USB_SERIAL_CONSOLE is not set | |
| # CONFIG_USB_SERIAL_GENERIC is not set | |
| # CONFIG_USB_SERIAL_AIRCABLE is not set | |
| # CONFIG_USB_SERIAL_ARK3116 is not set | |
| # CONFIG_USB_SERIAL_BELKIN is not set | |
| # CONFIG_USB_SERIAL_CH341 is not set | |
| # CONFIG_USB_SERIAL_WHITEHEAT is not set | |
| # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set | |
| # CONFIG_USB_SERIAL_CP210X is not set | |
| # CONFIG_USB_SERIAL_CYPRESS_M8 is not set | |
| # CONFIG_USB_SERIAL_EMPEG is not set | |
| # CONFIG_USB_SERIAL_FTDI_SIO is not set | |
| # CONFIG_USB_SERIAL_FUNSOFT is not set | |
| # CONFIG_USB_SERIAL_VISOR is not set | |
| # CONFIG_USB_SERIAL_IPAQ is not set | |
| # CONFIG_USB_SERIAL_IR is not set | |
| # CONFIG_USB_SERIAL_EDGEPORT is not set | |
| # CONFIG_USB_SERIAL_EDGEPORT_TI is not set | |
| # CONFIG_USB_SERIAL_F81232 is not set | |
| # CONFIG_USB_SERIAL_GARMIN is not set | |
| # CONFIG_USB_SERIAL_IPW is not set | |
| # CONFIG_USB_SERIAL_IUU is not set | |
| # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set | |
| # CONFIG_USB_SERIAL_KEYSPAN is not set | |
| # CONFIG_USB_SERIAL_KLSI is not set | |
| # CONFIG_USB_SERIAL_KOBIL_SCT is not set | |
| # CONFIG_USB_SERIAL_MCT_U232 is not set | |
| # CONFIG_USB_SERIAL_METRO is not set | |
| # CONFIG_USB_SERIAL_MOS7720 is not set | |
| # CONFIG_USB_SERIAL_MOS7840 is not set | |
| # CONFIG_USB_SERIAL_MOTOROLA is not set | |
| # CONFIG_USB_SERIAL_NAVMAN is not set | |
| # CONFIG_USB_SERIAL_PL2303 is not set | |
| # CONFIG_USB_SERIAL_OTI6858 is not set | |
| # CONFIG_USB_SERIAL_QCAUX is not set | |
| # CONFIG_USB_SERIAL_QUALCOMM is not set | |
| # CONFIG_USB_SERIAL_SPCP8X5 is not set | |
| # CONFIG_USB_SERIAL_HP4X is not set | |
| # CONFIG_USB_SERIAL_SAFE is not set | |
| # CONFIG_USB_SERIAL_SIEMENS_MPI is not set | |
| # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set | |
| # CONFIG_USB_SERIAL_SYMBOL is not set | |
| # CONFIG_USB_SERIAL_TI is not set | |
| # CONFIG_USB_SERIAL_CYBERJACK is not set | |
| # CONFIG_USB_SERIAL_XIRCOM is not set | |
| CONFIG_USB_SERIAL_WWAN=y | |
| CONFIG_USB_SERIAL_OPTION=y | |
| # CONFIG_USB_SERIAL_OMNINET is not set | |
| # CONFIG_USB_SERIAL_OPTICON is not set | |
| # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set | |
| # CONFIG_USB_SERIAL_XSENS_MT is not set | |
| # CONFIG_USB_SERIAL_ZIO is not set | |
| # CONFIG_USB_SERIAL_WISHBONE is not set | |
| # CONFIG_USB_SERIAL_ZTE is not set | |
| # CONFIG_USB_SERIAL_SSU100 is not set | |
| # CONFIG_USB_SERIAL_QT2 is not set | |
| # CONFIG_USB_SERIAL_DEBUG is not set | |
| # | |
| # USB Miscellaneous drivers | |
| # | |
| # CONFIG_USB_EMI62 is not set | |
| # CONFIG_USB_EMI26 is not set | |
| # CONFIG_USB_ADUTUX is not set | |
| # CONFIG_USB_SEVSEG is not set | |
| # CONFIG_USB_RIO500 is not set | |
| # CONFIG_USB_LEGOTOWER is not set | |
| # CONFIG_USB_LCD is not set | |
| # CONFIG_USB_LED is not set | |
| # CONFIG_USB_CYPRESS_CY7C63 is not set | |
| # CONFIG_USB_CYTHERM is not set | |
| # CONFIG_USB_IDMOUSE is not set | |
| # CONFIG_USB_FTDI_ELAN is not set | |
| # CONFIG_USB_APPLEDISPLAY is not set | |
| # CONFIG_USB_LD is not set | |
| # CONFIG_USB_TRANCEVIBRATOR is not set | |
| # CONFIG_USB_IOWARRIOR is not set | |
| # CONFIG_USB_TEST is not set | |
| # CONFIG_USB_ISIGHTFW is not set | |
| # CONFIG_USB_YUREX is not set | |
| # CONFIG_USB_EZUSB_FX2 is not set | |
| # CONFIG_USB_HSIC_USB3503 is not set | |
| # CONFIG_USB_PHY is not set | |
| # CONFIG_USB_OTG_WAKELOCK is not set | |
| # CONFIG_USB_GADGET is not set | |
| CONFIG_MMC=y | |
| CONFIG_MMC_DEBUG=y | |
| CONFIG_MMC_UNSAFE_RESUME=y | |
| # CONFIG_MMC_CLKGATE is not set | |
| # CONFIG_MMC_EMBEDDED_SDIO is not set | |
| # CONFIG_MMC_PARANOID_SD_INIT is not set | |
| # | |
| # MMC/SD/SDIO Card Drivers | |
| # | |
| CONFIG_MMC_BLOCK=y | |
| CONFIG_MMC_BLOCK_MINORS=16 | |
| CONFIG_MMC_BLOCK_BOUNCE=y | |
| # CONFIG_EMMC_SECURE_STORAGE is not set | |
| # CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set | |
| # CONFIG_SDIO_UART is not set | |
| # CONFIG_MMC_TEST is not set | |
| # | |
| # MMC/SD/SDIO Host Controller Drivers | |
| # | |
| # CONFIG_MMC_SDHCI is not set | |
| # CONFIG_MMC_SDHCI_PXAV3 is not set | |
| # CONFIG_MMC_SDHCI_PXAV2 is not set | |
| # CONFIG_MMC_DW is not set | |
| # CONFIG_MMC_VUB300 is not set | |
| # CONFIG_MMC_USHC is not set | |
| # CONFIG_MEMSTICK is not set | |
| CONFIG_NEW_LEDS=y | |
| CONFIG_LEDS_CLASS=y | |
| # | |
| # LED drivers | |
| # | |
| # CONFIG_LEDS_LM3530 is not set | |
| # CONFIG_LEDS_LM3642 is not set | |
| # CONFIG_LEDS_PCA9532 is not set | |
| # CONFIG_LEDS_GPIO is not set | |
| # CONFIG_LEDS_LP3944 is not set | |
| # CONFIG_LEDS_LP5521 is not set | |
| # CONFIG_LEDS_LP5523 is not set | |
| # CONFIG_LEDS_LP5562 is not set | |
| # CONFIG_LEDS_PCA955X is not set | |
| # CONFIG_LEDS_PCA9633 is not set | |
| # CONFIG_LEDS_DAC124S085 is not set | |
| # CONFIG_LEDS_REGULATOR is not set | |
| # CONFIG_LEDS_BD2802 is not set | |
| # CONFIG_LEDS_LT3593 is not set | |
| # CONFIG_LEDS_RENESAS_TPU is not set | |
| # CONFIG_LEDS_TCA6507 is not set | |
| # CONFIG_LEDS_LM355x is not set | |
| # CONFIG_LEDS_OT200 is not set | |
| # CONFIG_LEDS_BLINKM is not set | |
| # | |
| # LED Triggers | |
| # | |
| CONFIG_LEDS_TRIGGERS=y | |
| # CONFIG_LEDS_TRIGGER_TIMER is not set | |
| # CONFIG_LEDS_TRIGGER_ONESHOT is not set | |
| # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set | |
| # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set | |
| # CONFIG_LEDS_TRIGGER_CPU is not set | |
| # CONFIG_LEDS_TRIGGER_GPIO is not set | |
| # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set | |
| # | |
| # iptables trigger is under Netfilter config (LED target) | |
| # | |
| # CONFIG_LEDS_TRIGGER_TRANSIENT is not set | |
| # CONFIG_LEDS_TRIGGER_CAMERA is not set | |
| CONFIG_SWITCH=y | |
| # CONFIG_SWITCH_GPIO is not set | |
| # CONFIG_ACCESSIBILITY is not set | |
| # CONFIG_EDAC is not set | |
| CONFIG_RTC_LIB=y | |
| CONFIG_RTC_CLASS=y | |
| CONFIG_RTC_HCTOSYS=y | |
| CONFIG_RTC_SYSTOHC=y | |
| CONFIG_RTC_HCTOSYS_DEVICE="rtc0" | |
| # CONFIG_RTC_DEBUG is not set | |
| # | |
| # RTC interfaces | |
| # | |
| CONFIG_RTC_INTF_SYSFS=y | |
| CONFIG_RTC_INTF_PROC=y | |
| CONFIG_RTC_INTF_DEV=y | |
| # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set | |
| # CONFIG_RTC_DRV_TEST is not set | |
| # | |
| # I2C RTC drivers | |
| # | |
| # CONFIG_RTC_DRV_DS1307 is not set | |
| # CONFIG_RTC_DRV_DS1374 is not set | |
| # CONFIG_RTC_DRV_DS1672 is not set | |
| # CONFIG_RTC_DRV_DS3232 is not set | |
| # CONFIG_RTC_DRV_MAX6900 is not set | |
| # CONFIG_RTC_DRV_RS5C372 is not set | |
| # CONFIG_RTC_DRV_ISL1208 is not set | |
| # CONFIG_RTC_DRV_ISL12022 is not set | |
| # CONFIG_RTC_DRV_X1205 is not set | |
| # CONFIG_RTC_DRV_PCF8523 is not set | |
| # CONFIG_RTC_DRV_PCF8563 is not set | |
| # CONFIG_RTC_DRV_PCF8583 is not set | |
| # CONFIG_RTC_DRV_M41T80 is not set | |
| # CONFIG_RTC_DRV_BQ32K is not set | |
| # CONFIG_RTC_DRV_S35390A is not set | |
| # CONFIG_RTC_DRV_FM3130 is not set | |
| # CONFIG_RTC_DRV_RX8581 is not set | |
| # CONFIG_RTC_DRV_RX8025 is not set | |
| # CONFIG_RTC_DRV_EM3027 is not set | |
| # CONFIG_RTC_DRV_RV3029C2 is not set | |
| # | |
| # SPI RTC drivers | |
| # | |
| # CONFIG_RTC_DRV_M41T93 is not set | |
| # CONFIG_RTC_DRV_M41T94 is not set | |
| # CONFIG_RTC_DRV_DS1305 is not set | |
| # CONFIG_RTC_DRV_DS1390 is not set | |
| # CONFIG_RTC_DRV_MAX6902 is not set | |
| # CONFIG_RTC_DRV_R9701 is not set | |
| # CONFIG_RTC_DRV_RS5C348 is not set | |
| # CONFIG_RTC_DRV_DS3234 is not set | |
| # CONFIG_RTC_DRV_PCF2123 is not set | |
| # CONFIG_RTC_DRV_RX4581 is not set | |
| # | |
| # Platform RTC drivers | |
| # | |
| # CONFIG_RTC_DRV_CMOS is not set | |
| # CONFIG_RTC_DRV_DS1286 is not set | |
| # CONFIG_RTC_DRV_DS1511 is not set | |
| # CONFIG_RTC_DRV_DS1553 is not set | |
| # CONFIG_RTC_DRV_DS1742 is not set | |
| # CONFIG_RTC_DRV_STK17TA8 is not set | |
| # CONFIG_RTC_DRV_M48T86 is not set | |
| # CONFIG_RTC_DRV_M48T35 is not set | |
| # CONFIG_RTC_DRV_M48T59 is not set | |
| # CONFIG_RTC_DRV_MSM6242 is not set | |
| # CONFIG_RTC_DRV_BQ4802 is not set | |
| # CONFIG_RTC_DRV_RP5C01 is not set | |
| # CONFIG_RTC_DRV_V3020 is not set | |
| # CONFIG_RTC_DRV_DS2404 is not set | |
| # | |
| # on-CPU RTC drivers | |
| # | |
| # CONFIG_RTC_DRV_SNVS is not set | |
| # | |
| # HID Sensor RTC drivers | |
| # | |
| # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set | |
| # CONFIG_DMADEVICES is not set | |
| # CONFIG_AUXDISPLAY is not set | |
| CONFIG_UIO=y | |
| CONFIG_UIO_PDRV=y | |
| # CONFIG_UIO_PDRV_GENIRQ is not set | |
| # CONFIG_UIO_DMEM_GENIRQ is not set | |
| # CONFIG_VIRT_DRIVERS is not set | |
| # | |
| # Virtio drivers | |
| # | |
| # CONFIG_VIRTIO_MMIO is not set | |
| # | |
| # Microsoft Hyper-V guest support | |
| # | |
| CONFIG_STAGING=y | |
| # CONFIG_USBIP_CORE is not set | |
| # CONFIG_W35UND is not set | |
| # CONFIG_PRISM2_USB is not set | |
| # CONFIG_ECHO is not set | |
| # CONFIG_COMEDI is not set | |
| # CONFIG_ASUS_OLED is not set | |
| # CONFIG_RTLLIB is not set | |
| # CONFIG_R8712U is not set | |
| # CONFIG_RTS5139 is not set | |
| # CONFIG_TRANZPORT is not set | |
| # CONFIG_LINE6_USB is not set | |
| # CONFIG_USB_SERIAL_QUATECH2 is not set | |
| # CONFIG_VT6656 is not set | |
| # CONFIG_ZSMALLOC is not set | |
| # CONFIG_USB_ENESTORAGE is not set | |
| # CONFIG_BCM_WIMAX is not set | |
| # CONFIG_FT1000 is not set | |
| # | |
| # Speakup console speech | |
| # | |
| # CONFIG_SPEAKUP is not set | |
| # CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set | |
| # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set | |
| # CONFIG_STAGING_MEDIA is not set | |
| # | |
| # Android | |
| # | |
| # CONFIG_ANDROID is not set | |
| # CONFIG_ANDROID_BINDER_IPC is not set | |
| # CONFIG_ASHMEM is not set | |
| # CONFIG_ANDROID_LOGGER is not set | |
| # CONFIG_ANDROID_TIMED_OUTPUT is not set | |
| # CONFIG_ANDROID_TIMED_GPIO is not set | |
| # CONFIG_ANDROID_LOW_MEMORY_KILLER is not set | |
| # CONFIG_ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES is not set | |
| # CONFIG_ANDROID_INTF_ALARM_DEV is not set | |
| # CONFIG_SYNC is not set | |
| # CONFIG_SW_SYNC is not set | |
| # CONFIG_USB_WPAN_HCD is not set | |
| # CONFIG_WIMAX_GDM72XX is not set | |
| # CONFIG_CED1401 is not set | |
| # CONFIG_DGRP is not set | |
| # CONFIG_CLKDEV_LOOKUP is not set | |
| # | |
| # Hardware Spinlock drivers | |
| # | |
| # CONFIG_MAILBOX is not set | |
| CONFIG_IOMMU_SUPPORT=y | |
| CONFIG_OF_IOMMU=y | |
| # | |
| # Remoteproc drivers | |
| # | |
| # CONFIG_STE_MODEM_RPROC is not set | |
| # | |
| # Rpmsg drivers | |
| # | |
| # CONFIG_PM_DEVFREQ is not set | |
| # CONFIG_EXTCON is not set | |
| # CONFIG_MEMORY is not set | |
| # CONFIG_IIO is not set | |
| # CONFIG_PWM is not set | |
| CONFIG_IRQCHIP=y | |
| CONFIG_ARM_GIC=y | |
| # CONFIG_IPACK_BUS is not set | |
| # CONFIG_RESET_CONTROLLER is not set | |
| # | |
| # File systems | |
| # | |
| CONFIG_DCACHE_WORD_ACCESS=y | |
| CONFIG_EXT2_FS=y | |
| # CONFIG_EXT2_FS_XATTR is not set | |
| # CONFIG_EXT2_FS_XIP is not set | |
| CONFIG_EXT3_FS=y | |
| CONFIG_EXT3_DEFAULTS_TO_ORDERED=y | |
| CONFIG_EXT3_FS_XATTR=y | |
| CONFIG_EXT3_FS_POSIX_ACL=y | |
| CONFIG_EXT3_FS_SECURITY=y | |
| CONFIG_EXT4_FS=y | |
| CONFIG_EXT4_FS_POSIX_ACL=y | |
| CONFIG_EXT4_FS_SECURITY=y | |
| CONFIG_EXT4_DEBUG=y | |
| CONFIG_JBD=y | |
| # CONFIG_JBD_DEBUG is not set | |
| CONFIG_JBD2=y | |
| # CONFIG_JBD2_DEBUG is not set | |
| CONFIG_FS_MBCACHE=y | |
| # CONFIG_REISERFS_FS is not set | |
| # CONFIG_JFS_FS is not set | |
| # CONFIG_XFS_FS is not set | |
| # CONFIG_GFS2_FS is not set | |
| # CONFIG_BTRFS_FS is not set | |
| # CONFIG_NILFS2_FS is not set | |
| CONFIG_FS_POSIX_ACL=y | |
| CONFIG_FILE_LOCKING=y | |
| CONFIG_FSNOTIFY=y | |
| CONFIG_DNOTIFY=y | |
| CONFIG_INOTIFY_USER=y | |
| # CONFIG_FANOTIFY is not set | |
| # CONFIG_QUOTA is not set | |
| # CONFIG_QUOTACTL is not set | |
| # CONFIG_AUTOFS4_FS is not set | |
| CONFIG_FUSE_FS=y | |
| # CONFIG_CUSE is not set | |
| # | |
| # Caches | |
| # | |
| # CONFIG_FSCACHE is not set | |
| # | |
| # CD-ROM/DVD Filesystems | |
| # | |
| CONFIG_ISO9660_FS=y | |
| CONFIG_JOLIET=y | |
| CONFIG_ZISOFS=y | |
| CONFIG_UDF_FS=y | |
| CONFIG_UDF_NLS=y | |
| # | |
| # DOS/FAT/NT Filesystems | |
| # | |
| CONFIG_FAT_FS=y | |
| # CONFIG_MSDOS_FS is not set | |
| CONFIG_VFAT_FS=y | |
| CONFIG_FAT_DEFAULT_CODEPAGE=437 | |
| CONFIG_FAT_DEFAULT_IOCHARSET="ascii" | |
| # CONFIG_NTFS_FS is not set | |
| # | |
| # Pseudo filesystems | |
| # | |
| CONFIG_PROC_FS=y | |
| CONFIG_PROC_SYSCTL=y | |
| CONFIG_PROC_PAGE_MONITOR=y | |
| CONFIG_SYSFS=y | |
| CONFIG_TMPFS=y | |
| # CONFIG_TMPFS_POSIX_ACL is not set | |
| # CONFIG_TMPFS_XATTR is not set | |
| # CONFIG_HUGETLB_PAGE is not set | |
| # CONFIG_CONFIGFS_FS is not set | |
| CONFIG_MISC_FILESYSTEMS=y | |
| # CONFIG_ADFS_FS is not set | |
| # CONFIG_AFFS_FS is not set | |
| # CONFIG_ECRYPT_FS is not set | |
| # CONFIG_HFS_FS is not set | |
| CONFIG_HFSPLUS_FS=y | |
| # CONFIG_BEFS_FS is not set | |
| # CONFIG_BFS_FS is not set | |
| # CONFIG_EFS_FS is not set | |
| # CONFIG_JFFS2_FS is not set | |
| CONFIG_UBIFS_FS=y | |
| # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set | |
| CONFIG_UBIFS_FS_LZO=y | |
| CONFIG_UBIFS_FS_ZLIB=y | |
| # CONFIG_LOGFS is not set | |
| # CONFIG_CRAMFS is not set | |
| CONFIG_SQUASHFS=y | |
| # CONFIG_SQUASHFS_XATTR is not set | |
| CONFIG_SQUASHFS_ZLIB=y | |
| CONFIG_SQUASHFS_LZO=y | |
| CONFIG_SQUASHFS_XZ=y | |
| # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set | |
| # CONFIG_SQUASHFS_EMBEDDED is not set | |
| CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 | |
| # CONFIG_VXFS_FS is not set | |
| # CONFIG_MINIX_FS is not set | |
| # CONFIG_OMFS_FS is not set | |
| # CONFIG_HPFS_FS is not set | |
| # CONFIG_QNX4FS_FS is not set | |
| # CONFIG_QNX6FS_FS is not set | |
| # CONFIG_ROMFS_FS is not set | |
| # CONFIG_PSTORE is not set | |
| # CONFIG_SYSV_FS is not set | |
| # CONFIG_UFS_FS is not set | |
| # CONFIG_F2FS_FS is not set | |
| CONFIG_NETWORK_FILESYSTEMS=y | |
| # CONFIG_NFS_FS is not set | |
| # CONFIG_NFSD is not set | |
| # CONFIG_CEPH_FS is not set | |
| CONFIG_CIFS=y | |
| CONFIG_CIFS_STATS=y | |
| CONFIG_CIFS_STATS2=y | |
| CONFIG_CIFS_WEAK_PW_HASH=y | |
| # CONFIG_CIFS_UPCALL is not set | |
| CONFIG_CIFS_XATTR=y | |
| CONFIG_CIFS_POSIX=y | |
| # CONFIG_CIFS_ACL is not set | |
| CONFIG_CIFS_DEBUG=y | |
| CONFIG_CIFS_DEBUG2=y | |
| # CONFIG_CIFS_DFS_UPCALL is not set | |
| # CONFIG_CIFS_SMB2 is not set | |
| # CONFIG_NCP_FS is not set | |
| # CONFIG_CODA_FS is not set | |
| # CONFIG_AFS_FS is not set | |
| CONFIG_NLS=y | |
| CONFIG_NLS_DEFAULT="utf-8" | |
| CONFIG_NLS_CODEPAGE_437=y | |
| # CONFIG_NLS_CODEPAGE_737 is not set | |
| # CONFIG_NLS_CODEPAGE_775 is not set | |
| # CONFIG_NLS_CODEPAGE_850 is not set | |
| # CONFIG_NLS_CODEPAGE_852 is not set | |
| # CONFIG_NLS_CODEPAGE_855 is not set | |
| # CONFIG_NLS_CODEPAGE_857 is not set | |
| # CONFIG_NLS_CODEPAGE_860 is not set | |
| # CONFIG_NLS_CODEPAGE_861 is not set | |
| # CONFIG_NLS_CODEPAGE_862 is not set | |
| # CONFIG_NLS_CODEPAGE_863 is not set | |
| # CONFIG_NLS_CODEPAGE_864 is not set | |
| # CONFIG_NLS_CODEPAGE_865 is not set | |
| # CONFIG_NLS_CODEPAGE_866 is not set | |
| # CONFIG_NLS_CODEPAGE_869 is not set | |
| # CONFIG_NLS_CODEPAGE_936 is not set | |
| # CONFIG_NLS_CODEPAGE_950 is not set | |
| # CONFIG_NLS_CODEPAGE_932 is not set | |
| # CONFIG_NLS_CODEPAGE_949 is not set | |
| # CONFIG_NLS_CODEPAGE_874 is not set | |
| # CONFIG_NLS_ISO8859_8 is not set | |
| # CONFIG_NLS_CODEPAGE_1250 is not set | |
| # CONFIG_NLS_CODEPAGE_1251 is not set | |
| CONFIG_NLS_ASCII=y | |
| CONFIG_NLS_ISO8859_1=y | |
| # CONFIG_NLS_ISO8859_2 is not set | |
| # CONFIG_NLS_ISO8859_3 is not set | |
| # CONFIG_NLS_ISO8859_4 is not set | |
| # CONFIG_NLS_ISO8859_5 is not set | |
| # CONFIG_NLS_ISO8859_6 is not set | |
| # CONFIG_NLS_ISO8859_7 is not set | |
| # CONFIG_NLS_ISO8859_9 is not set | |
| # CONFIG_NLS_ISO8859_13 is not set | |
| # CONFIG_NLS_ISO8859_14 is not set | |
| # CONFIG_NLS_ISO8859_15 is not set | |
| # CONFIG_NLS_KOI8_R is not set | |
| # CONFIG_NLS_KOI8_U is not set | |
| # CONFIG_NLS_MAC_ROMAN is not set | |
| # CONFIG_NLS_MAC_CELTIC is not set | |
| # CONFIG_NLS_MAC_CENTEURO is not set | |
| # CONFIG_NLS_MAC_CROATIAN is not set | |
| # CONFIG_NLS_MAC_CYRILLIC is not set | |
| # CONFIG_NLS_MAC_GAELIC is not set | |
| # CONFIG_NLS_MAC_GREEK is not set | |
| # CONFIG_NLS_MAC_ICELAND is not set | |
| # CONFIG_NLS_MAC_INUIT is not set | |
| # CONFIG_NLS_MAC_ROMANIAN is not set | |
| # CONFIG_NLS_MAC_TURKISH is not set | |
| CONFIG_NLS_UTF8=y | |
| # | |
| # Kernel hacking | |
| # | |
| CONFIG_PRINTK_TIME=y | |
| CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 | |
| CONFIG_ENABLE_WARN_DEPRECATED=y | |
| CONFIG_ENABLE_MUST_CHECK=y | |
| CONFIG_FRAME_WARN=1024 | |
| # CONFIG_MAGIC_SYSRQ is not set | |
| # CONFIG_STRIP_ASM_SYMS is not set | |
| # CONFIG_READABLE_ASM is not set | |
| # CONFIG_UNUSED_SYMBOLS is not set | |
| CONFIG_DEBUG_FS=y | |
| # CONFIG_HEADERS_CHECK is not set | |
| # CONFIG_DEBUG_SECTION_MISMATCH is not set | |
| CONFIG_DEBUG_KERNEL=y | |
| # CONFIG_DEBUG_SHIRQ is not set | |
| # CONFIG_LOCKUP_DETECTOR is not set | |
| # CONFIG_PANIC_ON_OOPS is not set | |
| CONFIG_PANIC_ON_OOPS_VALUE=0 | |
| # CONFIG_DETECT_HUNG_TASK is not set | |
| # CONFIG_SCHED_DEBUG is not set | |
| # CONFIG_SCHEDSTATS is not set | |
| CONFIG_TIMER_STATS=y | |
| # CONFIG_DEBUG_OBJECTS is not set | |
| # CONFIG_SLUB_DEBUG_ON is not set | |
| # CONFIG_SLUB_STATS is not set | |
| CONFIG_HAVE_DEBUG_KMEMLEAK=y | |
| # CONFIG_DEBUG_KMEMLEAK is not set | |
| CONFIG_DEBUG_PREEMPT=y | |
| # CONFIG_DEBUG_RT_MUTEXES is not set | |
| # CONFIG_RT_MUTEX_TESTER is not set | |
| # CONFIG_DEBUG_SPINLOCK is not set | |
| # CONFIG_DEBUG_MUTEXES is not set | |
| # CONFIG_DEBUG_LOCK_ALLOC is not set | |
| # CONFIG_PROVE_LOCKING is not set | |
| # CONFIG_LOCK_STAT is not set | |
| # CONFIG_DEBUG_ATOMIC_SLEEP is not set | |
| # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | |
| CONFIG_STACKTRACE=y | |
| # CONFIG_DEBUG_STACK_USAGE is not set | |
| # CONFIG_DEBUG_KOBJECT is not set | |
| # CONFIG_DEBUG_HIGHMEM is not set | |
| CONFIG_DEBUG_BUGVERBOSE=y | |
| CONFIG_DEBUG_INFO=y | |
| # CONFIG_DEBUG_INFO_REDUCED is not set | |
| # CONFIG_DEBUG_VM is not set | |
| # CONFIG_DEBUG_WRITECOUNT is not set | |
| # CONFIG_DEBUG_MEMORY_INIT is not set | |
| # CONFIG_DEBUG_LIST is not set | |
| # CONFIG_TEST_LIST_SORT is not set | |
| # CONFIG_DEBUG_SG is not set | |
| # CONFIG_DEBUG_NOTIFIERS is not set | |
| # CONFIG_DEBUG_CREDENTIALS is not set | |
| # CONFIG_BOOT_PRINTK_DELAY is not set | |
| # | |
| # RCU Debugging | |
| # | |
| # CONFIG_PROVE_RCU_DELAY is not set | |
| # CONFIG_SPARSE_RCU_POINTER is not set | |
| # CONFIG_RCU_TORTURE_TEST is not set | |
| CONFIG_RCU_CPU_STALL_TIMEOUT=60 | |
| CONFIG_RCU_CPU_STALL_VERBOSE=y | |
| # CONFIG_RCU_CPU_STALL_INFO is not set | |
| CONFIG_RCU_TRACE=y | |
| # CONFIG_BACKTRACE_SELF_TEST is not set | |
| # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | |
| # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set | |
| # CONFIG_DEBUG_PER_CPU_MAPS is not set | |
| # CONFIG_LKDTM is not set | |
| # CONFIG_NOTIFIER_ERROR_INJECTION is not set | |
| # CONFIG_FAULT_INJECTION is not set | |
| # CONFIG_DEBUG_PAGEALLOC is not set | |
| CONFIG_HAVE_FUNCTION_TRACER=y | |
| CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y | |
| CONFIG_HAVE_DYNAMIC_FTRACE=y | |
| CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y | |
| CONFIG_HAVE_SYSCALL_TRACEPOINTS=y | |
| CONFIG_HAVE_C_RECORDMCOUNT=y | |
| CONFIG_TRACE_CLOCK=y | |
| CONFIG_TRACING_SUPPORT=y | |
| CONFIG_FTRACE=y | |
| # CONFIG_FUNCTION_TRACER is not set | |
| # CONFIG_IRQSOFF_TRACER is not set | |
| # CONFIG_PREEMPT_TRACER is not set | |
| # CONFIG_SCHED_TRACER is not set | |
| # CONFIG_ENABLE_DEFAULT_TRACERS is not set | |
| # CONFIG_FTRACE_SYSCALLS is not set | |
| # CONFIG_TRACER_SNAPSHOT is not set | |
| CONFIG_BRANCH_PROFILE_NONE=y | |
| # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set | |
| # CONFIG_PROFILE_ALL_BRANCHES is not set | |
| # CONFIG_STACK_TRACER is not set | |
| # CONFIG_BLK_DEV_IO_TRACE is not set | |
| # CONFIG_PROBE_EVENTS is not set | |
| # CONFIG_RBTREE_TEST is not set | |
| # CONFIG_INTERVAL_TREE_TEST is not set | |
| # CONFIG_DYNAMIC_DEBUG is not set | |
| # CONFIG_DMA_API_DEBUG is not set | |
| # CONFIG_ATOMIC64_SELFTEST is not set | |
| # CONFIG_SAMPLES is not set | |
| CONFIG_HAVE_ARCH_KGDB=y | |
| # CONFIG_KGDB is not set | |
| # CONFIG_TEST_STRING_HELPERS is not set | |
| # CONFIG_TEST_KSTRTOX is not set | |
| # CONFIG_STRICT_DEVMEM is not set | |
| CONFIG_ARM_UNWIND=y | |
| # CONFIG_DEBUG_USER is not set | |
| # CONFIG_DEBUG_RODATA is not set | |
| # CONFIG_DEBUG_LL is not set | |
| CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" | |
| CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" | |
| # CONFIG_PID_IN_CONTEXTIDR is not set | |
| # | |
| # Security options | |
| # | |
| CONFIG_KEYS=y | |
| # CONFIG_ENCRYPTED_KEYS is not set | |
| # CONFIG_KEYS_DEBUG_PROC_KEYS is not set | |
| # CONFIG_SECURITY_DMESG_RESTRICT is not set | |
| # CONFIG_SECURITY is not set | |
| CONFIG_SECURITYFS=y | |
| CONFIG_DEFAULT_SECURITY_DAC=y | |
| CONFIG_DEFAULT_SECURITY="" | |
| CONFIG_CRYPTO=y | |
| # | |
| # Crypto core or helper | |
| # | |
| CONFIG_CRYPTO_ALGAPI=y | |
| CONFIG_CRYPTO_ALGAPI2=y | |
| CONFIG_CRYPTO_AEAD=y | |
| CONFIG_CRYPTO_AEAD2=y | |
| CONFIG_CRYPTO_BLKCIPHER=y | |
| CONFIG_CRYPTO_BLKCIPHER2=y | |
| CONFIG_CRYPTO_HASH=y | |
| CONFIG_CRYPTO_HASH2=y | |
| CONFIG_CRYPTO_RNG=m | |
| CONFIG_CRYPTO_RNG2=y | |
| CONFIG_CRYPTO_PCOMP2=y | |
| CONFIG_CRYPTO_MANAGER=y | |
| CONFIG_CRYPTO_MANAGER2=y | |
| # CONFIG_CRYPTO_USER is not set | |
| CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y | |
| CONFIG_CRYPTO_GF128MUL=y | |
| # CONFIG_CRYPTO_NULL is not set | |
| # CONFIG_CRYPTO_PCRYPT is not set | |
| CONFIG_CRYPTO_WORKQUEUE=y | |
| # CONFIG_CRYPTO_CRYPTD is not set | |
| CONFIG_CRYPTO_AUTHENC=y | |
| # CONFIG_CRYPTO_TEST is not set | |
| # | |
| # Authenticated Encryption with Associated Data | |
| # | |
| # CONFIG_CRYPTO_CCM is not set | |
| # CONFIG_CRYPTO_GCM is not set | |
| # CONFIG_CRYPTO_SEQIV is not set | |
| # | |
| # Block modes | |
| # | |
| CONFIG_CRYPTO_CBC=y | |
| # CONFIG_CRYPTO_CTR is not set | |
| # CONFIG_CRYPTO_CTS is not set | |
| CONFIG_CRYPTO_ECB=y | |
| # CONFIG_CRYPTO_LRW is not set | |
| # CONFIG_CRYPTO_PCBC is not set | |
| CONFIG_CRYPTO_XTS=y | |
| # | |
| # Hash modes | |
| # | |
| # CONFIG_CRYPTO_CMAC is not set | |
| CONFIG_CRYPTO_HMAC=y | |
| # CONFIG_CRYPTO_XCBC is not set | |
| # CONFIG_CRYPTO_VMAC is not set | |
| # | |
| # Digest | |
| # | |
| CONFIG_CRYPTO_CRC32C=y | |
| # CONFIG_CRYPTO_CRC32 is not set | |
| # CONFIG_CRYPTO_GHASH is not set | |
| CONFIG_CRYPTO_MD4=y | |
| CONFIG_CRYPTO_MD5=y | |
| # CONFIG_CRYPTO_MICHAEL_MIC is not set | |
| # CONFIG_CRYPTO_RMD128 is not set | |
| # CONFIG_CRYPTO_RMD160 is not set | |
| # CONFIG_CRYPTO_RMD256 is not set | |
| # CONFIG_CRYPTO_RMD320 is not set | |
| CONFIG_CRYPTO_SHA1=y | |
| # CONFIG_CRYPTO_SHA1_ARM is not set | |
| CONFIG_CRYPTO_SHA256=y | |
| CONFIG_CRYPTO_SHA512=y | |
| # CONFIG_CRYPTO_TGR192 is not set | |
| CONFIG_CRYPTO_WP512=y | |
| # | |
| # Ciphers | |
| # | |
| CONFIG_CRYPTO_AES=y | |
| # CONFIG_CRYPTO_AES_ARM is not set | |
| # CONFIG_CRYPTO_ANUBIS is not set | |
| CONFIG_CRYPTO_ARC4=y | |
| # CONFIG_CRYPTO_BLOWFISH is not set | |
| # CONFIG_CRYPTO_CAMELLIA is not set | |
| # CONFIG_CRYPTO_CAST5 is not set | |
| # CONFIG_CRYPTO_CAST6 is not set | |
| CONFIG_CRYPTO_DES=y | |
| # CONFIG_CRYPTO_FCRYPT is not set | |
| # CONFIG_CRYPTO_KHAZAD is not set | |
| # CONFIG_CRYPTO_SALSA20 is not set | |
| # CONFIG_CRYPTO_SEED is not set | |
| # CONFIG_CRYPTO_SERPENT is not set | |
| # CONFIG_CRYPTO_TEA is not set | |
| CONFIG_CRYPTO_TWOFISH=y | |
| CONFIG_CRYPTO_TWOFISH_COMMON=y | |
| # | |
| # Compression | |
| # | |
| CONFIG_CRYPTO_DEFLATE=y | |
| # CONFIG_CRYPTO_ZLIB is not set | |
| CONFIG_CRYPTO_LZO=y | |
| # | |
| # Random Number Generation | |
| # | |
| CONFIG_CRYPTO_ANSI_CPRNG=m | |
| # CONFIG_CRYPTO_USER_API_HASH is not set | |
| # CONFIG_CRYPTO_USER_API_SKCIPHER is not set | |
| CONFIG_CRYPTO_HW=y | |
| # CONFIG_ASYMMETRIC_KEY_TYPE is not set | |
| # CONFIG_BINARY_PRINTF is not set | |
| # | |
| # Library routines | |
| # | |
| CONFIG_BITREVERSE=y | |
| CONFIG_GENERIC_STRNCPY_FROM_USER=y | |
| CONFIG_GENERIC_STRNLEN_USER=y | |
| CONFIG_GENERIC_PCI_IOMAP=y | |
| CONFIG_GENERIC_IO=y | |
| CONFIG_CRC_CCITT=y | |
| CONFIG_CRC16=y | |
| CONFIG_CRC_T10DIF=y | |
| CONFIG_CRC_ITU_T=y | |
| CONFIG_CRC32=y | |
| # CONFIG_CRC32_SELFTEST is not set | |
| CONFIG_CRC32_SLICEBY8=y | |
| # CONFIG_CRC32_SLICEBY4 is not set | |
| # CONFIG_CRC32_SARWATE is not set | |
| # CONFIG_CRC32_BIT is not set | |
| # CONFIG_CRC7 is not set | |
| CONFIG_LIBCRC32C=y | |
| # CONFIG_CRC8 is not set | |
| CONFIG_ZLIB_INFLATE=y | |
| CONFIG_ZLIB_DEFLATE=y | |
| CONFIG_LZO_COMPRESS=y | |
| CONFIG_LZO_DECOMPRESS=y | |
| CONFIG_XZ_DEC=y | |
| CONFIG_XZ_DEC_X86=y | |
| CONFIG_XZ_DEC_POWERPC=y | |
| CONFIG_XZ_DEC_IA64=y | |
| CONFIG_XZ_DEC_ARM=y | |
| CONFIG_XZ_DEC_ARMTHUMB=y | |
| CONFIG_XZ_DEC_SPARC=y | |
| CONFIG_XZ_DEC_BCJ=y | |
| # CONFIG_XZ_DEC_TEST is not set | |
| CONFIG_DECOMPRESS_GZIP=y | |
| CONFIG_GENERIC_ALLOCATOR=y | |
| CONFIG_HAS_IOMEM=y | |
| CONFIG_HAS_IOPORT=y | |
| CONFIG_HAS_DMA=y | |
| CONFIG_CPU_RMAP=y | |
| CONFIG_DQL=y | |
| CONFIG_NLATTR=y | |
| CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y | |
| CONFIG_AVERAGE=y | |
| # CONFIG_CORDIC is not set | |
| # CONFIG_DDR is not set | |
| # CONFIG_VIRTUALIZATION is not set |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * Amlogic-MX SKT Device Tree Source | |
| * | |
| * Copyright Amlogic 2013 | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /dts-v1/; | |
| /// ***************************************************************************************\n | |
| //$$ PROJECT="meson6" | |
| //$$ REMOVE 1 | |
| void root_func(){ | |
| //$$ ADD /{ | |
| compatible = "AMLOGIC,8726_MX"; | |
| model = "AMLOGIC"; | |
| interrupt-parent = <&gic>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| chosen { | |
| bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 disk=/dev/mmcblk0p2 rootwait console=tty0 consoleblank=0 scaling_governor=hotplug scaling_min_freq=200000 scaling_max_freq=1500000 systemd.show_status=auto"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - CPU | |
| //$$ MODULE="CPU" | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| //$$ DEVICE="cpu0" | |
| cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| reg = <0x200>; | |
| }; | |
| //$$ DEVICE="cpu1" | |
| cpu@1 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| reg = <0x1>; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Cache | |
| //$$ MODULE="Cache" | |
| //$$ DEVICE="cache" | |
| cache-controller { | |
| compatible = "arm,meson-pl310-cache"; | |
| reg = <0xc4200000 0x1000>; | |
| cache-unified; | |
| cache-level = <2>; | |
| aux-instruction_prefetch; | |
| aux-data_prefetch; | |
| aux-ns_lockdown; | |
| aux-ns_int_ctrl; | |
| aux-share_override; | |
| aux-cache_replace_policy_round_robin; | |
| prefetch-prefetch_offset = <6>; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Memory | |
| //$$ MODULE="Memory" | |
| //$$ DEVICE="memory" | |
| //$$ L2 PROP_U32 = "aml_reserved_start" | |
| //$$ L2 PROP_U32 = "aml_reserved_end" | |
| //$$ L2 PROP_U32 = "linux,usable-memory" | |
| memory{ | |
| device_type = "memory"; | |
| aml_reserved_start = <0x85000000>; /**reserved memory start-for kernel */ | |
| aml_reserved_end = <0x84000000>;/**reserved uImage and dtb memory-for uboot*/ | |
| phys_offset = <0x80000000>; | |
| linux,total-memory = <0x40000000>;/**0x40000000--1G memory 0x80000000--2G memory*/ | |
| }; | |
| /// *************************************************************************************** | |
| /// - GIC | |
| //$$ MODULE="GIC" | |
| //$$ DEVICE="gic" | |
| gic:interrupt-controller{ | |
| compatible = "arm,cortex-a9-gic"; | |
| reg = <0xc4301000 0x1000 | |
| 0xc4300100 0x0100>; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| #address-cells = <0>; | |
| }; | |
| /// *************************************************************************************** | |
| /// - ION | |
| //$$ MODULE="ION" | |
| //$$ DEVICE="ion_dev" | |
| //$$ L2 PROP_STR = "status" | |
| ion_dev{ | |
| compatible = "amlogic,ion_dev"; | |
| dev_name = "ion_dev"; | |
| status = "ok"; | |
| reserve-memory = <0x02000000>; | |
| reserve-iomap = "true"; | |
| }; | |
| /// ************************************************************************************** | |
| /// - DISP&MM-FB | |
| //$$ MODULE = "DISP&MM-FB" | |
| //$$ DEVICE = "mesonfb" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2 ="reserve-memory" | |
| //$$ L2 PROP_U32 = "vmode" | |
| //$$ L2 PROP_U32 5 = "display_size_default" | |
| mesonfb{ | |
| compatible = "amlogic,mesonfb"; | |
| dev_name = "mesonfb"; | |
| status = "okay"; | |
| reserve-memory = <0x01000000 0x00100000>; | |
| reserve-iomap = "true"; | |
| vmode = <0>; /*0:VMODE_720P 1:VMODE_LCD 2:VMODE_LVDS_1080P 3:VMODE_1080P*/ | |
| scale_mode = <0>; /*0:default 1:new*/ | |
| display_size_default = <1280 720 1280 2160 32>; // osd0:8M, osd1:1m 1280*720*4*3 = 11,059,200 | |
| }; | |
| //$$ DEVICE="deinterlace" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_U32 = "reserve-memory" | |
| deinterlace{ | |
| compatible = "amlogic,deinterlace"; | |
| dev_name = "deinterlace"; | |
| status = "okay"; | |
| reserve-memory = <0x01c00000>; // 27M | |
| reserve-iomap = "true"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - DISP&MM-A/V stream | |
| //$$ MODULE = "DISP&MM-A/V stream" | |
| //$$ DEVICE="mesonstream" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 4 ="reserve-memory" | |
| mesonstream{ | |
| compatible = "amlogic,mesonstream"; | |
| dev_name = "mesonstream.0"; | |
| status = "okay"; | |
| reserve-memory = <0x00a00000>; //10M | |
| reserve-iomap = "true"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - DISP&MM-A/V stream | |
| //$$ MODULE = "DISP&MM-A/V video dec" | |
| //$$ DEVICE="vdec" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 4 ="reg" | |
| vdec{ | |
| compatible = "amlogic,vdec"; | |
| dev_name = "vdec.0"; | |
| status = "okay"; | |
| reserve-memory = <0x02000000>; //32M | |
| reserve-iomap = "true"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - DISP&MM-PostProcess | |
| //$$ MODULE="DISP&MM-PostProcess" | |
| //$$ DEVICE="ppmgr" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 ="reserve-memory" | |
| ppmgr{ | |
| compatible = "amlogic,ppmgr"; | |
| dev_name = "ppmgr"; | |
| status = "okay"; | |
| reserve-memory = <0x01300000>; // 1280*732*21 = 19,676,160 | |
| reserve-iomap = "true"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - DISP&MM-Vout | |
| //$$ MODULE = "DISP&MM-Vout" | |
| //$$ DEVICE = "mesonvout" | |
| //$$ L2 PROP_STR = "status" | |
| mesonvout{ | |
| compatible = "amlogic,mesonvout"; | |
| dev_name = "mesonvout"; | |
| status = "okay"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - EARLY_INIT | |
| //$$ MODULE="early_init" | |
| //$$ DEVICE = "early_init" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_STR ="gpio-1" | |
| //$$ L2 PROP_STR = "gpio-2" | |
| early_init{ | |
| compatible = "amlogic,early_init"; | |
| dev_name = "early_init"; | |
| status = "ok"; | |
| gpio-1 = "GPIOAO_3"; | |
| gpio-2 = "GPIOAO_2"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - RTC | |
| //$$ MODULE="RTC" | |
| //$$ DEVICE="Rtc" | |
| //$$ L2 PROP_STR = "status" | |
| rtc{ | |
| compatible = "amlogic,aml_rtc"; | |
| status = "okay"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - UART | |
| //$$ MODULE="UART" | |
| //$$ DEVICE="uart_ao" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR = "pinctrl-names" | |
| //$$ L3 PROP_CHOICE "uart_ao_pin_match" = "pinctrl-0" | |
| uart_ao{ | |
| compatible = "amlogic,aml_uart"; | |
| port_name = "uart_ao"; | |
| status = "okay"; | |
| dev_name = "uart_ao"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&ao_uart_pins>; | |
| }; | |
| //$$ DEVICE="uart_0" | |
| //$$ L2 PROP_STR = "status" | |
| uart_0{ | |
| compatible = "amlogic,aml_uart"; | |
| port_name = "uart_a"; | |
| status = "okay"; | |
| dev_name = "uart_0"; | |
| }; | |
| //$$ DEVICE="uart_1" | |
| //$$ L2 PROP_STR = "status" | |
| uart_1{ | |
| compatible = "amlogic,aml_uart"; | |
| port_name = "uart_b"; | |
| status = "disabled"; | |
| dev_name = "uart_1"; | |
| }; | |
| //$$ DEVICE="uart_2" | |
| //$$ L2 PROP_STR = "status" | |
| uart_2{ | |
| compatible = "amlogic,aml_uart"; | |
| port_name = "uart_c"; | |
| status = "disabled"; | |
| dev_name = "uart_2"; | |
| }; | |
| //$$ DEVICE="uart_3" | |
| //$$ L2 PROP_STR = "status" | |
| uart_3{ | |
| compatible = "amlogic,aml_uart"; | |
| port_name = "uart_d"; | |
| status = "ok"; | |
| dev_name = "uart_3"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Bluetooth | |
| //$$ MODULE="Bluetooth" | |
| bt-dev{ | |
| compatible = "amlogic,bt-dev"; | |
| dev_name = "bt-dev"; | |
| gpio_reset = "GPIOE_11"; | |
| gpio_en = "GPIOE_11"; | |
| status = "ok"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - WiFi | |
| //$$ MODULE="WiFi" | |
| //$$ DEVICE="aml_broadcm_wifi" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR = "interrupt_pin" | |
| //$$ L2 PROP_U32 = "irq_num" | |
| //$$ L2 PROP_STR = "irq_trigger_type" | |
| //$$ L2 PROP_STR = "power_on_pin" | |
| //$$ L2 PROP_STR = "clock_32k_pin" | |
| wifi{ | |
| compatible = "amlogic,aml_broadcm_wifi"; | |
| dev_name = "aml_broadcm_wifi"; | |
| status = "okay"; | |
| interrupt_pin = "GPIOX_11"; | |
| irq_num = <4>; | |
| irq_trigger_type = "GPIO_IRQ_HIGH"; | |
| power_on_pin = "GPIOC_7"; | |
| clock_32k_pin = "GPIOX_12"; | |
| }; | |
| //$$ DEVICE="wifi_power" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR = "power_gpio" | |
| // wifi_power{ | |
| // compatible = "amlogic,wifi_power"; | |
| // dev_name = "wifi_power"; | |
| // status = "okay"; | |
| // power_gpio = "GPIOC_7"; | |
| // }; | |
| /// *************************************************************************************** | |
| /// - MMC | |
| //$$ MODULE="MMC" | |
| //$$ DEVICE="aml_sdio" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2 ="reg" | |
| //$$ L2 PROP_STR 7 = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "sdio_pin_0_match" = "pinctrl-0" | |
| //$$ L2 PROP_CHOICE "sdio_pin_1_match" = "pinctrl-1" | |
| //$$ L2 PROP_CHOICE "sdio_pin_2_match" = "pinctrl-2" | |
| //$$ L2 PROP_CHOICE "sdio_pin_3_match" = "pinctrl-3" | |
| //$$ L2 PROP_CHOICE "sdio_pin_4_match" = "pinctrl-4" | |
| //$$ L2 PROP_CHOICE "sdio_pin_5_match" = "pinctrl-5" | |
| // L2 PROP_CHOICE "sdio_pin_6_match" = "pinctrl-6" | |
| sdio{ | |
| compatible = "amlogic,aml_sdio"; | |
| dev_name = "aml_sdio.0"; | |
| status = "okay"; | |
| reg = <0xc1108c20 0x20>; | |
| pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins", "emmc_clk_cmd_pins", "emmc_all_pins", "sdio_clk_cmd_pins", "sdio_all_pins"; /*sd:sdio_b, emmc:sdio_c, sdio:sdio_a*/ | |
| // pinctrl-0 = <&sd_pins>; | |
| // pinctrl-1 = <&emmc_pins>; | |
| // pinctrl-2 = <&sdio_pins>; | |
| pinctrl-0 = <&sd_clk_cmd_pins>; | |
| pinctrl-1 = <&sd_all_pins>; | |
| pinctrl-2 = <&emmc_clk_cmd_pins>; | |
| pinctrl-3 = <&emmc_all_pins>; | |
| pinctrl-4 = <&sdio_clk_cmd_pins>; | |
| pinctrl-5 = <&sdio_all_pins>; | |
| //$$ DEVICE="sd" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 = "port" | |
| //$$ L2 PROP_STR = "pinname" | |
| //$$ L3 PROP_U32 = "ocr_avail" | |
| //$$ L2 PROP_STR 3 = "caps" | |
| //$$ L3 PROP_U32 = "f_min" | |
| //$$ L3 PROP_U32 = "f_max" | |
| //$$ L3 PROP_U32 = "f_max_w" | |
| //$$ L3 PROP_U32 = "max_req_size" | |
| //$$ L2 PROP_STR = "gpio_dat3" | |
| //$$ L2 PROP_STR = "jtag_pin" | |
| //$$ L2 PROP_STR = "gpio_cd" | |
| //$$ L2 PROP_STR = "gpio_ro" | |
| //$$ L2 PROP_U32 = "irq_in" | |
| //$$ L2 PROP_U32 = "irq_out" | |
| //$$ L2 PROP_U32 = "card_type" | |
| sd{ | |
| status = "okay"; | |
| port = <1>; /**0:sdio_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */ | |
| pinname = "sd"; | |
| ocr_avail = <0x200000>; /**VDD voltage 3.3 ~ 3.4 */ | |
| caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED"; | |
| f_min = <300000>; | |
| f_max = <50000000>; | |
| f_max_w = <50000000>; | |
| max_req_size = <0x20000>; /**128KB*/ | |
| gpio_dat3 = "CARD_3"; | |
| gpio_cd = "CARD_6"; | |
| gpio_power = "CARD_8"; | |
| power_level = <0>; | |
| irq_in = <5>; | |
| #irq_in_edge = "GPIO_IRQ_FALLING"; | |
| irq_out = <6>; | |
| #irq_out_edge = "GPIO_IRQ_RISING"; | |
| card_type = <5>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */ | |
| }; | |
| //$$ L3 PROP_U32 = "port" | |
| //$$ L2 PROP_STR = "pinname" | |
| //$$ L3 PROP_U32 = "ocr_avail" | |
| //$$ L2 PROP_STR 4 = "caps" | |
| //$$ L3 PROP_U32 = "f_min" | |
| //$$ L3 PROP_U32 = "f_max" | |
| //$$ L3 PROP_U32 = "max_req_size" | |
| //$$ L2 PROP_U32 = "card_type" | |
| sdio{ | |
| status = "okay"; | |
| port = <0>; /*0:sdio_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */ | |
| pinname = "sdio"; | |
| ocr_avail = <0x200000>; /*VDD voltage 3.3 ~ 3.4 */ | |
| caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE"; | |
| f_min = <300000>; | |
| f_max = <50000000>; | |
| f_max_w = <50000000>; | |
| max_req_size = <0x20000>; /*128KB*/ | |
| card_type = <3>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */ | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - I2C | |
| //$$ MODULE="I2C" | |
| //$$ DEVICE="I2C_AO" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2 ="reg" | |
| //$$ L3 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "I2C_AO_pin_match" = "pinctrl-0" | |
| i2c@c8100500{ /*I2C-AO*/ | |
| compatible = "amlogic,aml_i2c"; | |
| dev_name = "i2c-AO"; | |
| status = "ok"; | |
| reg = <0xc8100500 0x1d>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| device_id = <0>; | |
| pinctrl-names="default"; | |
| pinctrl-0=<&ao_i2c_master>; | |
| use_pio = <0>; | |
| master_i2c_speed = <100000>; | |
| }; | |
| //$$ DEVICE = "I2C_A" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2 ="reg" | |
| //$$ L3 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "I2C_A_pin_match" = "pinctrl-0" | |
| i2c@c1108500{ /*I2C-A*/ | |
| compatible = "amlogic,aml_i2c"; | |
| dev_name = "i2c-A"; | |
| status = "ok"; | |
| reg = <0xc1108500 0x20>; | |
| device_id = <1>; | |
| pinctrl-names="default"; | |
| pinctrl-0=<&a_i2c_master>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| use_pio = <0>; | |
| master_i2c_speed = <300000>; | |
| }; | |
| //$$ DEVICE="I2C_B" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2="reg" | |
| //$$ L3 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "I2C_B_pin_match" = "pinctrl-0" | |
| i2c@c11087c0{ /*I2C-B*/ | |
| compatible = "amlogic,aml_i2c"; | |
| dev_name = "i2c-B"; | |
| status = "ok"; | |
| reg = <0xc11087c0 0x20>; | |
| device_id = <2>; | |
| pinctrl-names="default"; | |
| pinctrl-0=<&b_i2c_master>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| use_pio = <0>; | |
| master_i2c_speed = <300000>; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Power | |
| //$$ MODULE="Power" | |
| //$$ DEVICE="dvfs" | |
| //$$ L2 PROP_STR = "status" | |
| dvfs { | |
| compatible = "amlogic, amlogic-dvfs"; /** fixed for driver, don't change */ | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "ok"; | |
| //$$ L2 PROP_U32 = "dvfs_id" | |
| //$$ L2 PROP_U32 = "table_count" | |
| //$$ L2 PROP_U32 11*3 = "dvfs_table" | |
| vcck_dvfs { | |
| dvfs_id = <1>; /** must be value of (1 << n) */ | |
| table_count = <11>; /** must be correct count for dvfs_table */ | |
| dvfs_table = < | |
| /* NOTE: frequent in this table must be ascending order */ | |
| /* frequent(Khz) min_uV max_uV */ | |
| 200000 1010000 1010000 | |
| 600000 1010000 1010000 | |
| 792000 1010000 1010000 | |
| 816000 1110000 1110000 | |
| 840000 1110000 1110000 | |
| 984000 1110000 1110000 | |
| 1000000 1110000 1110000 | |
| 1080000 1220000 1220000 | |
| 1200000 1240000 1240000 | |
| 1320000 1320000 1320000 | |
| 1500000 1320000 1320000 | |
| >; | |
| }; | |
| }; | |
| //$$ DEVICE="meson_vcck_dvfs_driver" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "meson_vcck_dvfs_pin_0_match" = "pinctrl-0" | |
| //$$ L2 PROP_U32 = "use_pwm" | |
| //$$ L2 PROP_U32 = "table_count" | |
| //$$ L2 PROP_U32 16*2 = "cs_voltage_table" | |
| meson_vcck_dvfs_driver{ | |
| compatible = "amlogic, meson_vcck_dvfs"; | |
| dev_name = "meson_vcck_dvfs_driver"; | |
| status = "ok"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&aml_pwm_pins>; | |
| use_pwm = <1>; | |
| pmw_controller = "PWM_C"; | |
| table_count = <16>; | |
| cs_voltage_table = < | |
| /* | |
| * Note: This table is hardware depended, If your hardware use PWM method, | |
| * then first line in this table is PWM register value, second line is | |
| * voltage of VCCK according this PWM register value. If your platform use | |
| * constant-current source to adjust vcck voltage, then the first line should | |
| * set to 0, means not valid, member 'use_pwm' in this node should set to 0. | |
| * | |
| * ---- This table must be in ascending order by voltage ---- | |
| * | |
| * PWM value VCCK voltage | |
| */ | |
| 0x130009 1010000 | |
| 0x12000a 1050000 | |
| 0x11000b 1070000 | |
| 0x10000c 1090000 | |
| 0x0f000d 1110000 | |
| 0x0e000e 1130000 | |
| 0x0d000f 1150000 | |
| 0x0c0010 1170000 | |
| 0x0b0011 1190000 | |
| 0x0a0012 1210000 | |
| 0x090013 1220000 | |
| 0x080014 1240000 | |
| 0x070015 1270000 | |
| 0x060016 1280000 | |
| 0x050017 1300000 | |
| 0x040018 1320000 | |
| >; | |
| }; | |
| /// *************************************************************************************** | |
| /// - USB Controller | |
| //$$ MODULE="USB Controller" | |
| usb_con { | |
| lm-compatible = "logicmodule-bus"; | |
| //$$ DEVICE="usb_b" | |
| //$$ L2 PROP_U32 = "lm-periph-id" | |
| //$$ L2 PROP_STR = "clock-src" | |
| //$$ L2 PROP_U32 = "port-id" | |
| //$$ L2 PROP_U32 = "port-type" | |
| //$$ L2 PROP_U32 = "port-speed" | |
| //$$ L2 PROP_U32 = "port-config" | |
| //$$ L2 PROP_U32 = "port-dma" | |
| //$$ L2 PROP_U32 = "port-id-mode" | |
| //$$ L2 PROP_STR = "status" | |
| usb_b{ | |
| lm-compatible = "amlogic,usb"; | |
| lm-periph-id = <1>; /** lm name */ | |
| clock-src = "usb1"; /** clock src */ | |
| port-id = <1>; /** ref to mach/usb.h */ | |
| port-type = <1>; /** 0: otg, 1: host, 2: slave */ | |
| port-speed = <0>; /** 0: default, 1: high, 2: full */ | |
| port-config = <0>; /** 0: default */ | |
| port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/ | |
| port-id-mode = <1>; /** 0: hardware, 1: sw_host, 2: sw_slave*/ | |
| status = "okay"; | |
| }; | |
| //$$ DEVICE="usb_a" | |
| //$$ L2 PROP_U32 = "lm-periph-id" | |
| //$$ L2 PROP_STR = "clock-src" | |
| //$$ L2 PROP_U32 = "port-id" | |
| //$$ L2 PROP_U32 = "port-type" | |
| //$$ L2 PROP_U32 = "port-speed" | |
| //$$ L2 PROP_U32 = "port-config" | |
| //$$ L2 PROP_U32 = "port-dma" | |
| //$$ L2 PROP_U32 = "port-id-mode" | |
| //$$ L2 PROP_STR = "gpio-vbus-power" | |
| //$$ L2 PROP_U32 = "gpio-work-mask" | |
| // L2 PROP_U32 = "charger_detect" | |
| //$$ L2 PROP_STR = "status" | |
| usb_a{ | |
| lm-compatible = "amlogic,usb"; | |
| lm-periph-id = <0>; /** lm name */ | |
| clock-src = "usb0"; /** clock src */ | |
| port-id = <0>; /** ref to mach/usb.h */ | |
| port-type = <0>; /** 0: otg, 1: host, 2: slave */ | |
| port-speed = <0>; /** 0: default, high, 1: full */ | |
| port-config = <0>; /** 0: default */ | |
| port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/ | |
| port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/ | |
| gpio-vbus-power = "GPIOD_9"; | |
| gpio-work-mask = <1>; /**0: work on pulldown,1:work on pullup*/ | |
| status = "okay"; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Audio | |
| //$$ MODULE="Audio" | |
| //$$ DEVICE="audio" | |
| //$$ L2 PROP_STR = "status" | |
| audio{ | |
| compatible = "amlogic,aml-audio"; | |
| dev_name = "aml-audio.0"; | |
| status = "okay"; | |
| }; | |
| //$$ DEVICE="audio_dai" | |
| //$$ L2 PROP_STR = "status" | |
| audio_dai{ | |
| compatible = "amlogic,aml-dai"; | |
| dev_name = "aml-dai.0"; | |
| status = "okay"; | |
| }; | |
| //$$ DEVICE="dummy_codec_audio" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR = "pinctrl-names" | |
| //$$ L3 PROP_CHOICE "dummy_codec_audio_0_pin_match" = "pinctrl-0" | |
| dummy_codec_audio{ | |
| status = "okay"; | |
| compatible = "amlogic,aml_dummy_codec_audio"; | |
| dev_name = "aml_dummy_codec_audio.0"; | |
| pinctrl-names = "dummy_codec_audio"; | |
| pinctrl-0 = <&aml_dummy_codec_pins>; | |
| }; | |
| //$$ DEVICE="dummy_codec" | |
| //$$ L2 PROP_STR = "status" | |
| dummy_codec{ | |
| status = "okay"; | |
| compatible = "amlogic,aml_dummy_codec"; | |
| dev_name = "dummy_codec.0"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Input | |
| //$$ MODULE="Input" | |
| //$$ DEVICE="saradc" | |
| //$$ L2 PROP_STR = "status" | |
| saradc{ | |
| compatible = "amlogic,saradc"; | |
| status = "okay"; | |
| }; | |
| //$$ DEVICE="adc_keypad" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_STR 5 = "key_name" | |
| //$$ L2 PROP_U32 = "key_num" | |
| //$$ L2 PROP_U32 = "name_len" | |
| //$$ L2 PROP_U32 5 = "key_code" | |
| //$$ L2 PROP_U32 5 = "key_chan" | |
| //$$ L2 PROP_U32 5 = "key_val" | |
| //$$ L2 PROP_U32 5 = "key_tolerance" | |
| adc_keypad{ | |
| compatible = "amlogic,adc_keypad"; | |
| status = "okay"; | |
| key_num = <6>; | |
| name_len = <20>; | |
| key_name = "menu","vol-","vol+","back","home","ok"; | |
| key_code = <139 114 115 158 102 232>; | |
| key_chan = <4 4 4 4 4 4>; | |
| key_val = <9 150 275 392 513 639>; | |
| key_tolerance = <40 40 40 40 40 40>; | |
| }; | |
| //$$ DEVICE="key_input" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_U32 = "scan_period" | |
| //$$ L2 PROP_U32 = "fuzz_time" | |
| //$$ L2 PROP_U32 = "key_code_list" | |
| //$$ L2 PROP_U32 = "key_num" | |
| //$$ L2 PROP_U32 = "config" | |
| key_input{ | |
| compatible = "amlogic,key_input"; | |
| status = "okay"; | |
| scan_period = <20>; | |
| fuzz_time = <60>; | |
| key_code_list = <116>; | |
| key_num = <1>; | |
| config = <0>; | |
| }; | |
| //$$ DEVICE="aml_remote" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_U32 = "ao_baseaddr" | |
| //$$ L2 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "Remote_pin_match" = "pinctrl-0" | |
| meson-remote{ | |
| compatible = "amlogic,aml_remote"; | |
| dev_name = "meson-remote"; | |
| status = "okay"; | |
| ao_baseaddr = <0xf3100480>; | |
| pinctrl-names="default"; | |
| pinctrl-0=<&remote_pins>; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Spi | |
| //$$ MODULE="Spi" | |
| //$$ DEVICE="spi" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_U32 2 = "reg" | |
| //$$ L2 PROP_STR = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "Spi_pin_0_match" = "pinctrl-0" | |
| //$$ L2 PROP_U32 = "nr-parts" | |
| //$$ L2 PROP_CHOICE "Spi_nr-part-0_match" = "nr-part-0" | |
| //$$ L2 PROP_CHOICE "Spi_nr-part-1_match" = "nr-part-1" | |
| spi@cc000000{ | |
| compatible = "amlogic,apollo_spi_nor"; | |
| status = "ok"; | |
| reg = <0xcc000000 0x04000000>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&aml_spi_nor_pins>; | |
| nr-parts = <2>; | |
| nr-part-0 = <&bootloader>; | |
| nr-part-1 = <&ubootenv>; | |
| //$$ MATCH "Spi_nr-part-0_match" = <&bootloader> | |
| //$$ L2 PROP_STR = "name" | |
| //$$ L2 PROP_U32 = "offset" | |
| //$$ L2 PROP_U32 = "size" | |
| bootloader:bootloader{ | |
| name = "bootloader"; | |
| offset = <0>; | |
| size = <0x100000>; | |
| }; | |
| //$$ MATCH "Spi_nr-part-1_match" = <&ubootenv> | |
| //$$ L2 PROP_STR = "name" | |
| //$$ L2 PROP_U32 = "offset" | |
| //$$ L2 PROP_U32 = "size" | |
| ubootenv:ubootenv{ | |
| name = "ubootenv"; | |
| offset = <0x100000>; | |
| size = <0x8000>; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Nand | |
| //$$ MODULE="Nand" | |
| //$$ DEVICE="aml_nand" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L3 PROP_U32 2 ="reg" | |
| //$$ L2 PROP_STR 2 = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE 7 "Nand_pin_0_match" = "pinctrl-0" | |
| //$$ L2 PROP_CHOICE 7 "Nand_pin_1_match" = "pinctrl-1" | |
| //$$ L3 PROP_STR 2 ="plat-names" | |
| //$$ L2 PROP_U32 = "plat-num" | |
| //$$ L2 PROP_CHOICE "plat-part-0_match" = "plat-part-0" | |
| // L2 PROP_CHOICE "plat-part-1_match" = "plat-part-1" | |
| nand{ | |
| compatible = "amlogic,aml_nand"; | |
| dev_name = "nand"; | |
| status = "okay"; | |
| reg = <0xc1108600 0x24>; | |
| pinctrl-names = "nand_rb_mod","nand_norb_mod"; | |
| pinctrl-0 = <&nand_input_state &conf_nand_state &nand_base | |
| &nand_ce0 &nand_rb0 | |
| &nand_rb1 &nand_ce1>; | |
| pinctrl-1 = <&nand_input_state &conf_nand_state &nand_base | |
| &nand_ce0 &nand_ce1 | |
| &nand_ce2 &nand_ce3>; | |
| device_id = <0>; | |
| plat-names = "nandnormal"; | |
| plat-num = <1>; | |
| plat-part-0 = <&normal>; | |
| //$$ MATCH "plat-part-0_match" = <&normal> | |
| //$$ L2 PROP_STR 2 = "enable_pad" | |
| //$$ L2 PROP_STR 2 = "busy_pad" | |
| //$$ L2 PROP_STR = "timming_mode" | |
| //$$ L2 PROP_STR = "bch_mode" | |
| //$$ L2 PROP_STR = "plane_mode" | |
| //$$ L2 PROP_U32 = "t_rea" | |
| //$$ L2 PROP_U32 = "t_rhoh" | |
| //$$ L2 PROP_U32 = "chip_num" | |
| //$$ L2 PROP_U32 = "part_num" | |
| //$$ L2 PROP_U32 = "rb_detect" | |
| normal: normal{ | |
| enable_pad ="ce0","ce1"; | |
| busy_pad = "rb0","rb1"; | |
| timming_mode = "mode5"; | |
| bch_mode = "bch60_1k"; | |
| plane_mode = "twoplane"; | |
| t_rea = <20>; | |
| t_rhoh = <15>; | |
| chip_num = <2>; | |
| part_num = <9>; | |
| partition = <&nand_partitions>; | |
| rb_detect = <1>; | |
| }; | |
| nand_partitions:nand_partition{ | |
| logo{ | |
| offset=<0x0 0x4800000>; | |
| size=<0x0 0x800000>; | |
| }; | |
| aml_logo{ | |
| offset=<0x0 0x5800000>; | |
| size=<0x0 0x800000>; | |
| }; | |
| recovery{ | |
| offset=<0x0 0x6800000>; | |
| size=<0x0 0x800000>; | |
| }; | |
| boot{ | |
| offset=<0x0 0x8800000>; | |
| size=<0x0 0x800000>; | |
| }; | |
| system{ | |
| offset=<0x0 0xa800000>; | |
| size=<0x0 0x40000000>; | |
| }; | |
| cache{ | |
| offset=<0x0 0x4a800000>; | |
| size=<0x0 0x20000000>; | |
| }; | |
| backup{ | |
| offset=<0x0 0x6a800000>; | |
| size=<0x0 0x10000000>; | |
| }; | |
| userdata{ | |
| offset=<0xffffffff 0xffffffff>; | |
| size=<0x0 0x0>; | |
| }; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Efuse | |
| //$$ MODULE="Efuse" | |
| //$$ DEVICE="efuse" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_U32 2 = "plat-pos" | |
| //$$ L2 PROP_U32 = "plat-count" | |
| //$$ L2 PROP_U32 = "usid-min" | |
| //$$ L2 PROP_U32 = "usid-max" | |
| efuse{ | |
| compatible = "amlogic,efuse"; | |
| dev_name = "efuse"; | |
| status = "okay"; | |
| plat-pos = <0 454>; | |
| plat-count = <58>; | |
| usid-min = <8>; /*reserved*/ | |
| usid-max = <31>; /*reserved*/ | |
| }; | |
| /// *************************************************************************************** | |
| /// - HDMI | |
| //$$ MODULE="HDMI" | |
| //$$ DEVICE="amhdmitx" | |
| //$$ L2 PROP_STR = "status" | |
| //$$ L2 PROP_CHOICE "HDMI_vend-data_match" = "vend-data" | |
| //$$ L2 PROP_CHOICE "HDMI_pwr-ctrl_match" = "pwr-ctrl" | |
| amhdmitx{ | |
| compatible = "amlogic,amhdmitx"; | |
| dev_name = "amhdmitx"; | |
| status = "ok"; | |
| vend-data = <&vend_data>; | |
| pwr-ctrl = <&pwr_ctrl>; | |
| phy-size = <3>; | |
| phy-data = <27 0x16 0x30 /* 480i/p 576i/p */ | |
| 74 0x16 0x40 /* 720p 1080i */ | |
| 148 0x16 0x40 /* 1080p */ | |
| >; | |
| //$$ MATCH "HDMI_vend-data_match" = <&vend_data> | |
| //$$ L2 PROP_STR = "vendor_name" | |
| //$$ L2 PROP_U32 = "vendor_id" | |
| //$$ L2 PROP_STR = "product_desc" | |
| //$$ L2 PROP_STR = "cec_osd_string" | |
| vend_data: vend_data{ | |
| vendor_name = "Amlogic"; /* Max Chars: 8 */ | |
| vendor_id = <0x000000>; /* Refer to http://standards.ieee.org/develop/regauth/oui/oui.txt */ | |
| product_desc = "MX MBox G18Ref"; /* Max Chars: 16 */ | |
| cec_osd_string = "Amlogic MBox"; /* Max Chars: 14 */ | |
| }; | |
| //$$ MATCH "HDMI_pwr-ctrl_match" = <&pwr_ctrl> | |
| //$$ L2 PROP_STR = "pwr_5v_on" | |
| //$$ L2 PROP_STR 3 = "pwr_5v_off" | |
| //$$ L2 PROP_STR 3 = "pwr_3v3_on" | |
| //$$ L2 PROP_STR = "pwr_3v3_off" | |
| //$$ L2 PROP_STR = "pwr_hpll_vdd_on" | |
| //$$ L2 PROP_STR = "pwr_hpll_vdd_off" | |
| pwr_ctrl: pwr_ctrl{ | |
| pwr_5v_on = "cpu","GPIOD_5","H"; | |
| pwr_5v_off = "cpu","GPIOD_5","L"; | |
| pwr_3v3_on = ""; | |
| pwr_3v3_off = ""; | |
| pwr_hpll_vdd_on = ""; | |
| pwr_hpll_vdd_off = ""; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Securitykey | |
| //$$ MODULE="Securitykey" | |
| securitykey{ | |
| compatible = "amlogic,aml_keys"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - PowerManager | |
| //$$ MODULE="PowerManager" | |
| //$$ DEVICE="amvenc_avc" | |
| //$$ L2 PROP_STR = "status" | |
| aml_pm{ | |
| compatible = "amlogic,pm"; | |
| dev_name = "aml_pm"; | |
| status = "okay"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Cpufreq | |
| //$$ MODULE="Cpufreq" | |
| //$$ DEVICE="cpufreq-meson" | |
| //$$ L2 PROP_STR = "status" | |
| cpufreq-meson{ | |
| compatible = "amlogic,cpufreq-meson"; | |
| status = "okay"; | |
| }; | |
| /// *************************************************************************************** | |
| /// - Ethernet | |
| //$$ MODULE="Ethernet" | |
| //$$ DEVICE="meson-eth" | |
| //$$ L2 PROP_STR = "status" | |
| meson-eth{ | |
| compatible = "amlogic,meson-eth"; | |
| dev_name = "meson-eth"; | |
| status = "okay"; | |
| ethbaseaddr = <0xf3610000>; | |
| interruptnum = <40>; | |
| }; | |
| /// ************************************************************************************** | |
| /// - GPIO | |
| //$$ MODULE="GPIO" | |
| //$$ DEVICE="m6-gpio" | |
| gpio:gpio{ | |
| compatible = "amlogic,m6-gpio"; | |
| dev_name = "gpio"; | |
| #gpio-cells=<2>; | |
| }; | |
| /// ************************************************************************************** | |
| /// - Pinmux | |
| //$$ MODULE="Pinmux" | |
| //$$ DEVICE="pinmux-m6" | |
| pinmux{ | |
| compatible = "amlogic,pinmux-m6"; | |
| dev_name = "pinmux"; | |
| #pinmux-cells=<2>; | |
| //$$ MATCH "uart_ao_pin_match" = "&ao_uart_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR 2 = "amlogic,pins" | |
| ao_uart_pins:ao_uart{ | |
| amlogic,setmask=<10 0x1800>; | |
| amlogic,pins="GPIOAO_0", "GPIOAO_1"; | |
| }; | |
| //$$ MATCH "uart_0_pin_match" = "&a_uart_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR 2 = "amlogic,pins" | |
| a_uart_pins:a_uart{ | |
| amlogic,setmask=<4 0x3c00>; | |
| amlogic,pins="GPIOX_13", "GPIOX_14", "GPIOX_15", "GPIOX_16"; | |
| }; | |
| //$$ MATCH "meson_vcck_dvfs_pin_0_match" = "&aml_pwm_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| aml_pwm_pins:aml_pwm{ | |
| amlogic,setmask=<2 0x4>; | |
| amlogic,clrmask=<1 0x20000000>; | |
| amlogic,pins="GPIOD_0"; | |
| }; | |
| //$$ MATCH "I2C_AO_pin_match" = "&ao_i2c_master" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 2 = "amlogic,pins" | |
| ao_i2c_master:ao_i2c{ | |
| amlogic,setmask=<10 0x60>; | |
| amlogic,clrmask=<10 0x1800006>; | |
| amlogic,pins="GPIOAO_4","GPIOAO_5"; | |
| }; | |
| //$$ MATCH "I2C_A_pin_match" = "&a_i2c_master" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 2 = "amlogic,pins" | |
| a_i2c_master:a_i2c{ | |
| amlogic,setmask=<5 0xc000000>; | |
| amlogic,clrmask=<5 0x3000000>; | |
| amlogic,pins="GPIOX_25","GPIOX_26"; | |
| }; | |
| //$$ MATCH "I2C_B_pin_match" = "&b_i2c_master" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 2 = "amlogic,pins" | |
| b_i2c_master:b_i2c{ | |
| amlogic,setmask=<5 0xc0000000>; | |
| amlogic,clrmask=<5 0x30000000>; | |
| amlogic,pins="GPIOX_27","GPIOX_28"; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_input_state" | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_input_state" | |
| //$$ L2 PROP_STR 17 = "amlogic,pins" | |
| //$$ L2 PROP_U32 = "amlogic,enable-output" | |
| nand_input_state:nand_input{ | |
| amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4", | |
| "BOOT_5","BOOT_6","BOOT_7","BOOT_12","BOOT_13", | |
| "BOOT_8","BOOT_9","BOOT_10","BOOT_11", | |
| "BOOT_14","BOOT_15","BOOT_16"; | |
| amlogic,enable-output=<1>; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&conf_nand_state" | |
| //$$ MATCH "Nand_pin_1_match" = "&conf_nand_state" | |
| //$$ L2 PROP_STR 9 = "amlogic,pins" | |
| //$$ L2 PROP_U32 = "amlogic,pullup" | |
| conf_nand_state: conf_nand{ | |
| amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4", | |
| "BOOT_5","BOOT_6","BOOT_7","BOOT_16"; | |
| amlogic,pullup=<1>; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_base" | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_base" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 4*2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 13 = "amlogic,pins" | |
| nand_base: nand{ | |
| amlogic,setmask=<2 0xc3c0000>; | |
| amlogic,clrmask=< 5 0xe | |
| 3 0x80000000 | |
| 6 0x3c000000 | |
| 4 0x70000000>; | |
| amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4", | |
| "BOOT_5","BOOT_6","BOOT_7","BOOT_12","BOOT_13", | |
| "BOOT_14","BOOT_15","BOOT_16"; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_ce0" | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_ce0" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_ce0: nand_ce0{ | |
| amlogic,setmask=<2 0x2000000>; | |
| amlogic,pins = "BOOT_8"; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_ce1" | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_ce1" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_ce1: nand_ce1{ | |
| amlogic,setmask=<2 0x1000000>; | |
| amlogic,pins = "BOOT_9"; | |
| }; | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_ce2" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_ce2: nand_ce2{ | |
| amlogic,setmask=<2 0x800000>; | |
| amlogic,pins = "BOOT_10"; | |
| }; | |
| //$$ MATCH "Nand_pin_1_match" = "&nand_ce3" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_ce3: nand_ce3{ | |
| amlogic,setmask=<2 0x400000>; | |
| amlogic,pins = "BOOT_11"; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_rb0" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_rb0: nand_rb0{ | |
| amlogic,setmask=<2 0x20000>; | |
| amlogic,clrmask=<2 0x800000>; | |
| amlogic,pins = "BOOT_10"; | |
| }; | |
| //$$ MATCH "Nand_pin_0_match" = "&nand_rb1" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| nand_rb1: nand_rb1{ | |
| amlogic,setmask=<2 0x10000>; | |
| amlogic,clrmask=<2 0x400000>; | |
| amlogic,pins = "BOOT_11"; | |
| }; | |
| sdio_all_pins:sdio_all_pins{ | |
| amlogic,setmask=<8 0x0000003f>; /*sdio a*/ | |
| amlogic,clrmask=<6 0x3f000000 /*sdio c*/ | |
| 2 0x0000fc00 /*sdio b*/ | |
| 5 0x00006c00>; /*sdhc a*/ | |
| amlogic,pins = "GPIOX_0","GPIOX_1","GPIOX_2","GPIOX_3","GPIOX_8","GPIOX_9"; | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| sdio_clk_cmd_pins:sdio_clk_cmd_pins{ | |
| amlogic,setmask=<8 0x00000003>; /*sdio a*/ | |
| amlogic,clrmask=<6 0x3f000000 /*sdio c*/ | |
| 2 0x0000fc00 /*sdio b*/ | |
| 5 0x00006c00>; /*sdhc a*/ | |
| amlogic,pins = "GPIOX_8","GPIOX_9"; | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| sd_all_pins:sd_all_pins{ | |
| amlogic,setmask=<2 0x0000fc00>; /*sdio b*/ | |
| amlogic,clrmask=<6 0x3f000000 /*sdio c*/ | |
| 8 0x0000003f /*sdio a*/ | |
| 2 0x000000f0>; /*sdhc b*/ | |
| amlogic,pins = "CARD_0","CARD_1","CARD_2","CARD_3","CARD_4","CARD_5"; | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| sd_clk_cmd_pins:sd_clk_cmd_pins{ | |
| amlogic,setmask=<2 0x00000c00>; /*sdio b*/ | |
| amlogic,clrmask=<6 0x3f000000 /*sdio c*/ | |
| 8 0x0000003f /*sdio a*/ | |
| 2 0x000000f0>; /*sdhc b*/ | |
| amlogic,pins = "CARD_4","CARD_5"; /* CARD_4:CLK, CARD_5:CMD */ | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| emmc_all_pins:emmc_all_pins{ | |
| amlogic,setmask=<6 0x3f000000>; /*sdio c, */ | |
| amlogic,clrmask=<2 0x04c3fc00 /*sdio b & nand*/ | |
| 8 0x0000003f /*sdio a*/ | |
| 4 0x6c000000 /*sdhc c*/ | |
| 3 0x80000000>; /*I2C*/ | |
| amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_10","BOOT_11"; | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| emmc_clk_cmd_pins:emmc_clk_cmd_pins{ | |
| amlogic,setmask=<6 0x03000000>; /*bit[24-25] */ | |
| amlogic,clrmask=<2 0x04c3fc00 /*sdio b & nand*/ | |
| 8 0x0000003f /*sdio a*/ | |
| 4 0x6c000000 /*sdhc c*/ | |
| 3 0x80000000>; /*I2C*/ | |
| amlogic,pins = "BOOT_10","BOOT_11"; | |
| amlogic,enable-output=<1>; /* 0:output, 1:input */ | |
| amlogic,pullup=<0>; | |
| }; | |
| //$$ MATCH "Remote_pin_match" = "&remote_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR= "amlogic,pins" | |
| remote_pins:remote_pin{ | |
| amlogic,setmask=<10 0x1>; | |
| amlogic,pins="GPIOAO_7"; | |
| }; | |
| //$$ MATCH "wm8960_pin_match" = "&aml_i2s_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 4 = "amlogic,pins" | |
| aml_i2s_pins: aml_i2s_pins{ | |
| amlogic,setmask=<9 0xAB0>; | |
| amlogic,clrmask=<9 0x440>; | |
| amlogic,pins = "GPIOE_0","GPIOE_1","GPIOE_2","GPIOE_3"; | |
| }; | |
| //$$ MATCH "wm8960_pin_match" = "&config_aml_hp_det_pins" | |
| //$$ L2 PROP_STR= "amlogic,pins" | |
| //$$ L2 PROP_U32 = "amlogic,pullup" | |
| config_aml_hp_det_pins: config_aml_hp_det_pins{ | |
| amlogic,pins = "GPIOA_19"; | |
| amlogic,pullup=<1>; | |
| }; | |
| //$$ MATCH "dummy_codec_audio_0_pin_match" = "&aml_dummy_codec_pins" | |
| //$$ L2 PROP_U32 2*2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 5 = "amlogic,pins" | |
| aml_dummy_codec_pins: aml_dummy_codec_pins{ | |
| amlogic,setmask=<9 0x2B0 | |
| 3 0x1000000>; | |
| amlogic,clrmask=<9 0x380c4e>; | |
| amlogic,pins = "GPIOE_1","GPIOE_2","GPIOE_3","GPIOE_4","GPIOC_9"; | |
| }; | |
| //$$ MATCH "Bl_pin_0_match" = "&lcd_backlight_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| lcd_backlight_pins:lcd_backlight{ | |
| amlogic,setmask=<2 0x8>; | |
| amlogic,clrmask=<1 0x10000000>; | |
| amlogic,pins = "GPIOD_1"; | |
| }; | |
| lcd_ttl_hvsync_pins_on:lcd_ttl_hvsync_on{ | |
| amlogic,setmask=<1 0xc0000>; | |
| amlogic,clrmask=<0 0xc00000>; | |
| amlogic,pins = "GPIOD_2","GPIOD_3"; | |
| }; | |
| lcd_ttl_hvsync_pins_off:lcd_ttl_hvsync_off{ | |
| amlogic,clrmask=<0 0xc00000 1 0xc0000>; | |
| amlogic,pins = "GPIOD_2","GPIOD_3"; | |
| amlogic,enable-output=<1>; | |
| }; | |
| lcd_ttl_de_pins_on:lcd_ttl_de_on{ | |
| amlogic,setmask=<1 0x20000>; | |
| amlogic,clrmask=<0 0x1000000>; | |
| amlogic,pins = "GPIOD_4"; | |
| }; | |
| lcd_ttl_de_pins_off:lcd_ttl_de_off{ | |
| amlogic,clrmask=<0 0x1000000 1 0x20000>; | |
| amlogic,pins = "GPIOD_4"; | |
| amlogic,enable-output=<1>; | |
| }; | |
| lcd_ttl_clk_pins_on:lcd_ttl_clk_on{ | |
| amlogic,setmask=<1 0x4000>; | |
| amlogic,clrmask=<0 0x8000000 1 0x3800>; | |
| amlogic,pins = "GPIOD_7"; | |
| }; | |
| lcd_ttl_clk_pins_off:lcd_ttl_clk_off{ | |
| amlogic,clrmask=<0 0x8000000 1 0x7800>; | |
| amlogic,pins = "GPIOD_7"; | |
| amlogic,enable-output=<1>; | |
| }; | |
| lcd_ttl_rgb_8bit_pins_on:lcd_ttl_rgb_8bit_on{ | |
| amlogic,setmask=<0 0x3f>; | |
| amlogic,clrmask=<5 0xff8000>; | |
| amlogic,pins = "GPIOB_0","GPIOB_1","GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7", //R0~R7 | |
| "GPIOB_8","GPIOB_9","GPIOB_10","GPIOB_11","GPIOB_12","GPIOB_13","GPIOB_14","GPIOB_15", //G0~G7 | |
| "GPIOB_16","GPIOB_17","GPIOB_18","GPIOB_19","GPIOB_20","GPIOB_21","GPIOB_22","GPIOB_23";//B0~B7 | |
| }; | |
| lcd_ttl_rgb_8bit_pins_off:lcd_ttl_rgb_8bit_off{ | |
| amlogic,clrmask=<0 0x3f 5 0xff8000>; | |
| amlogic,pins = "GPIOB_0","GPIOB_1","GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7", //R0~R7 | |
| "GPIOB_8","GPIOB_9","GPIOB_10","GPIOB_11","GPIOB_12","GPIOB_13","GPIOB_14","GPIOB_15", //G0~G7 | |
| "GPIOB_16","GPIOB_17","GPIOB_18","GPIOB_19","GPIOB_20","GPIOB_21","GPIOB_22","GPIOB_23";//B0~B7 | |
| amlogic,enable-output=<1>; | |
| }; | |
| lcd_ttl_rgb_6bit_pins_on:lcd_ttl_rgb_6bit_on{ | |
| amlogic,setmask=<0 0x15>; | |
| amlogic,clrmask=<5 0xf98000>; | |
| amlogic,pins = "GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7", //R2~R7 | |
| "GPIOB_10","GPIOB_11","GPIOB_12","GPIOB_13","GPIOB_14","GPIOB_15", //G2~G7 | |
| "GPIOB_18","GPIOB_19","GPIOB_20","GPIOB_21","GPIOB_22","GPIOB_23"; //B2~B7 | |
| }; | |
| lcd_ttl_rgb_6bit_pins_off:lcd_ttl_rgb_6bit_off{ | |
| amlogic,clrmask=<0 0x15 5 0xf98000>; | |
| amlogic,pins = "GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7", //R2~R7 | |
| "GPIOB_10","GPIOB_11","GPIOB_12","GPIOB_13","GPIOB_14","GPIOB_15", //G2~G7 | |
| "GPIOB_18","GPIOB_19","GPIOB_20","GPIOB_21","GPIOB_22","GPIOB_23"; //B2~B7 | |
| amlogic,enable-output=<1>; | |
| }; | |
| //$$ MATCH "Camera_pin_match" = "&aml_cam_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_STR = "amlogic,pins" | |
| aml_cam_pins: aml_cam_pins{ | |
| amlogic,setmask=<9 0x1000>; | |
| amlogic,pins = "GPIOZ_12"; | |
| }; | |
| //$$ MATCH "Spi_pin_0_match" = "&aml_spi_nor_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 2 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 4 = "amlogic,pins" | |
| aml_spi_nor_pins: aml_spi_nor_pins{ | |
| amlogic,setmask=<5 0xf>; | |
| amlogic,clrmask=<2 0x380000>; | |
| amlogic,pins = "BOOT_12","BOOT_13","BOOT_14","BOOT_17"; | |
| }; | |
| //$$ MATCH "dvb_p_ts2_pins_match" = "&dvb_p_ts2_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 8 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 12 = "amlogic,pins" | |
| dvb_p_ts2_pins: dvb_p_ts2_pins { | |
| amlogic,setmask = <3 0xfff>; | |
| amlogic,clrmask = <0 0xf 5 0xff00>; | |
| amlogic,pins = "GPIOB_0","GPIOB_1","GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7","GPIOB_8","GPIOB_9","GPIOB_10","GPIOB_11"; | |
| }; | |
| //$$ MATCH "dvb_s_ts2_pins_match" = "&dvb_s_ts2_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 6 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 5 = "amlogic,pins" | |
| dvb_s_ts2_pins: dvb_s_ts2_pins { | |
| amlogic,setmask = <3 0xfff>; | |
| amlogic,clrmask = <0 0xf 5 0xff00>; | |
| amlogic,pins = "GPIOB_0","GPIOB_1","GPIOB_2","GPIOB_3","GPIOB_4","GPIOB_5","GPIOB_6","GPIOB_7","GPIOB_8","GPIOB_9","GPIOB_10","GPIOB_11"; | |
| }; | |
| //$$ MATCH "dvb_p_ts0_pins_match" = "&dvb_p_ts0_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 8 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 12 = "amlogic,pins" | |
| dvb_p_ts0_pins: dvb_p_ts0_pins { | |
| amlogic,setmask = <3 0xfff>; | |
| amlogic,clrmask = <0 0x40 6 0xf80000>; | |
| amlogic,pins = "GPIOA_0","GPIOA_1","GPIOA_2","GPIOA_3","GPIOA_4","GPIOA_5","GPIOA_6","GPIOA_7","GPIOA_8","GPIOA_9","GPIOA_10","GPIOA_11"; | |
| }; | |
| //$$ MATCH "dvb_s_ts0_pins_match" = "&dvb_s_ts0_pins" | |
| //$$ L2 PROP_U32 2 = "amlogic,setmask" | |
| //$$ L2 PROP_U32 6 = "amlogic,clrmask" | |
| //$$ L2 PROP_STR 5 = "amlogic,pins" | |
| dvb_s_ts0_pins: dvb_s_ts0_pins { | |
| amlogic,setmask = <3 0xfff>; | |
| amlogic,clrmask = <0 0x40 6 0xF80000>; | |
| amlogic,pins = "GPIOA_0","GPIOA_1","GPIOA_2","GPIOA_3","GPIOA_4","GPIOA_5","GPIOA_6","GPIOA_7","GPIOA_8","GPIOA_9","GPIOA_10","GPIOA_11"; | |
| }; | |
| }; | |
| /// *************************************************************************************** | |
| /// - DVB | |
| //$$ MODULE="DVB" | |
| //$$ DEVICE="dvb" | |
| //$$ L2 PROP_STR = "ts2" | |
| //$$ L2 PROP_U32 = "ts2_invert" | |
| //$$ L2 PROP_U32 = "ts2_control" | |
| //$$ L2 PROP_STR 6 = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "dvb_p_ts2_pins_match" = "pinctrl-0" | |
| //$$ L2 PROP_CHOICE "dvb_s_ts2_pins_match" = "pinctrl-1" | |
| dvb{ | |
| compatible = "amlogic,dvb"; | |
| /*"parallel","serial","disable"*/ | |
| ts2 = "parallel"; | |
| ts2_control = <0>; | |
| ts2_invert = <0>; | |
| ts0 = "parallel"; | |
| ts0_control = <0>; | |
| ts0_invert = <0>; | |
| pinctrl-names = "p_ts0", "s_ts0","p_ts2", "s_ts2"; | |
| pinctrl-0 = <&dvb_p_ts0_pins>; | |
| pinctrl-1 = <&dvb_s_ts0_pins>; | |
| pinctrl-2 = <&dvb_p_ts2_pins>; | |
| pinctrl-3 = <&dvb_s_ts2_pins>; | |
| }; | |
| //$$ DEVICE="dvbfe" | |
| //$$ L2 PROP_STR = "dtv_demod0" | |
| //$$ L2 PROP_U32 = "dtv_demod0_i2c_adap_id" | |
| //$$ L2 PROP_U32 = "dtv_demod0_i2c_addr" | |
| //$$ L2 PROP_U32 = "dtv_demod0_reset_value" | |
| //$$ L2 PROP_STR = "dtv_demod0_reset_gpio" | |
| //$$ L2 PROP_U32 = "fe0_dtv_demod" | |
| //$$ L2 PROP_U32 = "fe0_ts" | |
| //$$ L2 PROP_U32 = "fe0_dev" | |
| //$$ L2 PROP_STR 6 = "pinctrl-names" | |
| //$$ L2 PROP_CHOICE "dvb_fe_pins_match" = "pinctrl-0" | |
| dvbfe{ | |
| compatible = "amlogic,dvbfe"; | |
| dtv_demod0 = "Avl6211_0"; | |
| dtv_demod0_i2c_adap_id = <1>; | |
| dtv_demod0_i2c_addr = <0xC0>; | |
| dtv_demod0_reset_value = <0>; | |
| dtv_demod0_reset_gpio = "GPIOD_8"; | |
| fe0_dtv_demod = <0>; | |
| fe0_ts = <2>; | |
| fe0_dev = <0>; | |
| dtv_demod1 = "Avl6211_1"; | |
| dtv_demod1_i2c_adap_id = <2>; | |
| dtv_demod1_i2c_addr = <0xC0>; | |
| dtv_demod1_reset_value = <0>; | |
| dtv_demod1_reset_gpio = "GPIOD_8"; | |
| fe1_dtv_demod = <1>; | |
| fe1_ts = <0>; | |
| fe1_dev = <1>; | |
| }; | |
| }; /* end of / */ | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment