Skip to content

Instantly share code, notes, and snippets.

@graysky2

graysky2/dmesg.log Secret

Created May 24, 2020 09:42
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save graysky2/095a1597f1522e4fd5d3864d5ca3cf25 to your computer and use it in GitHub Desktop.
Save graysky2/095a1597f1522e4fd5d3864d5ca3cf25 to your computer and use it in GitHub Desktop.
Download ZIP
dmesg on 19.07.3
Raw
dmesg.log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 SMP Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0a27840, node_mem_map dda39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440
[ 0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 477376K/491520K available (4976K kernel code, 160K rwdata, 756K rodata, 1024K init, 235K bss, 14144K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc07dc1e0 (5969 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a28140 ( 161 kB)
[ 0.000000] .bss : 0xc0a2a000 - 0xc0a64e18 ( 236 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000222] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000248] pid_max: default: 32768 minimum: 301
[ 0.000373] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000392] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000951] CPU: Testing write buffer coherency: ok
[ 0.001709] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.001866] Hierarchical SRCU implementation.
[ 0.002589] smp: Bringing up secondary CPUs ...
[ 0.004382] smp: Brought up 1 node, 2 CPUs
[ 0.004399] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004411] CPU: All CPU(s) started in SVC mode.
[ 0.014502] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.014663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014689] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.014798] pinctrl core: initialized pinctrl subsystem
[ 0.015762] NET: Registered protocol family 16
[ 0.016020] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.017255] cpuidle: using governor ladder
[ 0.017324] cpuidle: using governor menu
[ 0.039632] msm_bus_fabric_init_driver
[ 0.040996] usbcore: registered new interface driver usbfs
[ 0.041074] usbcore: registered new interface driver hub
[ 0.041165] usbcore: registered new device driver usb
[ 0.041224] pps_core: LinuxPPS API ver. 1 registered
[ 0.041238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.041269] PTP clock support registered
[ 0.043094] clocksource: Switched to clocksource dg_timer
[ 0.046131] NET: Registered protocol family 2
[ 0.046724] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.046769] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.046826] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.046916] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.046942] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.047118] NET: Registered protocol family 1
[ 0.047167] PCI: CLS 0 bytes, default 64
[ 0.048285] No memory allocated for crashlog
[ 0.048574] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.053158] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.053175] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.061904] io scheduler noop registered
[ 0.061921] io scheduler deadline registered (default)
[ 0.063756] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.063863] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.063958] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.064749] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.064790] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.064815] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.172338] qcom-pcie 1b500000.pci: link up
[ 0.172499] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.172522] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.172542] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.172558] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.172575] pci_bus 0000:00: scanning bus
[ 0.172623] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.172709] pci 0000:00:00.0: calling 0xc030d3c0
[ 0.172782] pci 0000:00:00.0: supports D1
[ 0.172795] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.172809] pci 0000:00:00.0: PME# disabled
[ 0.173060] pci_bus 0000:00: fixups for bus
[ 0.173083] PCI: bus0: Fast back to back transfers disabled
[ 0.173104] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.173326] pci_bus 0000:01: scanning bus
[ 0.173505] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.173856] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.174320] pci 0000:01:00.0: calling 0xc030d3c0
[ 0.174966] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.175006] pci 0000:01:00.0: PME# disabled
[ 0.175326] pci_bus 0000:01: fixups for bus
[ 0.175399] PCI: bus1: Fast back to back transfers disabled
[ 0.175416] pci_bus 0000:01: bus scan returning with max=01
[ 0.175435] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.175452] pci_bus 0000:00: bus scan returning with max=ff
[ 0.175499] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.175525] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.175655] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.175678] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.175709] pci 0000:00:00.0: calling 0xc055fbdc
[ 0.175899] pcieport 0000:00:00.0: assign IRQ: got 67
[ 0.176218] pcieport 0000:00:00.0: AER enabled with IRQ 35
[ 0.176337] pci 0000:01:00.0: calling 0xc055fbdc
[ 0.176745] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.176854] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.176941] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.177692] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.177730] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.177753] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.287580] qcom-pcie 1b700000.pci: link up
[ 0.287722] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.287741] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.287758] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.287772] pci_bus 0001:00: scanning bus
[ 0.287820] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.287893] pci 0001:00:00.0: calling 0xc030d3c0
[ 0.287956] pci 0001:00:00.0: supports D1
[ 0.287966] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.287980] pci 0001:00:00.0: PME# disabled
[ 0.288210] pci_bus 0001:00: fixups for bus
[ 0.288228] PCI: bus0: Fast back to back transfers disabled
[ 0.288248] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.288359] pci_bus 0001:01: scanning bus
[ 0.288545] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.288916] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.289413] pci 0001:01:00.0: calling 0xc030d3c0
[ 0.290104] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.290146] pci 0001:01:00.0: PME# disabled
[ 0.290488] pci_bus 0001:01: fixups for bus
[ 0.290563] PCI: bus1: Fast back to back transfers disabled
[ 0.290579] pci_bus 0001:01: bus scan returning with max=01
[ 0.290597] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.290613] pci_bus 0001:00: bus scan returning with max=ff
[ 0.290649] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.290673] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.290806] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.290827] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.290855] pci 0001:00:00.0: calling 0xc055fbdc
[ 0.291027] pcieport 0001:00:00.0: assign IRQ: got 100
[ 0.291287] pcieport 0001:00:00.0: AER enabled with IRQ 68
[ 0.291398] pci 0001:01:00.0: calling 0xc055fbdc
[ 0.293715] L2 @ QSB rate. Forcing new rate.
[ 0.293924] L2 @ 384000 KHz
[ 0.294098] CPU0 @ 800000 KHz
[ 0.294111] CPU1 @ QSB rate. Forcing new rate.
[ 0.294240] CPU1 @ 384000 KHz
[ 0.298069] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.299994] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.302494] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.302606] msm_serial 16340000.serial: uartclk = 7372800
[ 0.302689] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 101, base_baud = 460800) is a MSM
[ 0.302729] msm_serial: console setup on port #0
[ 1.022483] console [ttyMSM0] enabled
[ 1.027347] msm_serial: driver initialized
[ 1.035704] loop: module loaded
[ 1.037756] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[ 1.037789] nand: Micron MT29F1G08ABBEAH4
[ 1.044331] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.048266] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.055709] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.062491] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.072574] random: fast init done
[ 1.090294] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.099737] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.101341] 0x000001200000-0x000001340000 : "art"
[ 1.106693] 0x000001340000-0x000001480000 : "artbak"
[ 1.111518] 0x000001480000-0x000001880000 : "kernel"
[ 1.121362] 0x000001880000-0x000007900000 : "ubi"
[ 1.289976] 0x000007900000-0x000008000000 : "reserve"
[ 1.304119] libphy: GPIO Bitbanged MDIO: probed
[ 1.325538] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.185340] ar8327: qca,phy-rgmii-en is not specified
[ 2.185732] libphy: Fixed MDIO Bus: probed
[ 2.191577] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 2.193784] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.199877] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 2.205008] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 2.210992] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 2.219049] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 2.226615] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 2.233641] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 2.241458] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 2.247354] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 2.254731] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.263064] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 2.270299] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.276444] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 2.281388] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 2.287528] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 2.295526] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 2.303004] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 2.310115] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 2.318018] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 2.323828] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 2.331132] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.338667] i2c /dev entries driver
[ 2.347441] Calibration not found.
[ 2.350861] Speed bin: 0
[ 2.353168] PVS bin: 4
[ 2.357247] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.358104] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.365882] sdhci: Secure Digital Host Controller Interface driver
[ 2.372529] sdhci: Copyright(c) Pierre Ossman
[ 2.378839] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.384572] NET: Registered protocol family 10
[ 2.390317] Segment Routing with IPv6
[ 2.393267] NET: Registered protocol family 17
[ 2.397081] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.401873] 8021q: 802.1Q VLAN Support v1.8
[ 2.414499] Registering SWP/SWPB emulation handler
[ 2.431135] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.443298] s1a: supplied by regulator-dummy
[ 2.443511] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.446889] s1b: supplied by regulator-dummy
[ 2.451632] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.456158] s2a: supplied by regulator-dummy
[ 2.460851] s2a: Bringing 0uV into 775000-775000uV
[ 2.465360] s2b: supplied by regulator-dummy
[ 2.469695] s2b: Bringing 0uV into 775000-775000uV
[ 2.479004] UBI: auto-attach mtd6
[ 2.479036] ubi0: attaching mtd6
[ 2.534641] random: crng init done
[ 3.188864] ubi0: scanning is finished
[ 3.198263] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 3.198284] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.202631] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.209476] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.216316] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 3.223029] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.229352] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2036961869
[ 3.236372] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 3.245860] ubi0: background thread "ubi_bgt0d" started, PID 59
[ 3.263933] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.263952] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.268303] hctosys: unable to open rtc device (rtc0)
[ 3.279214] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.280026] Freeing unused kernel memory: 1024K
[ 3.759110] init: Console is alive
[ 3.759358] init: - watchdog -
[ 4.301847] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.363678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.366230] SCSI subsystem initialized
[ 4.372075] libata version 3.00 loaded.
[ 4.374808] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 4.374871] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.379197] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 4.388875] scsi host0: ahci
[ 4.396214] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[ 4.725394] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.727101] ehci-platform: EHCI generic platform driver
[ 4.732665] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.735378] ohci-platform: OHCI generic platform driver
[ 4.871233] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.871328] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.876103] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 4.883286] xhci-hcd xhci-hcd.0.auto: irq 105, io mem 0x11000000
[ 4.893372] hub 1-0:1.0: USB hub found
[ 4.898819] hub 1-0:1.0: 1 port detected
[ 4.902613] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.906508] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.911733] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.919421] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.926271] hub 2-0:1.0: USB hub found
[ 4.934288] hub 2-0:1.0: 1 port detected
[ 4.937985] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.941858] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 4.947338] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 4.954785] xhci-hcd xhci-hcd.1.auto: irq 106, io mem 0x10000000
[ 4.964480] hub 3-0:1.0: USB hub found
[ 4.970341] hub 3-0:1.0: 1 port detected
[ 4.974121] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.977966] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 4.983260] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.990949] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.997763] hub 4-0:1.0: USB hub found
[ 5.005881] hub 4-0:1.0: 1 port detected
[ 5.010699] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.015897] init: - preinit -
[ 5.273503] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 6.646608] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[ 6.647704] dwmac1000: Master AXI performs any burst length
[ 6.655586] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 6.661053] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 6.670754] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.753839] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 7.753908] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.844022] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 142
[ 9.909170] UBIFS (ubi0:1): recovery needed
[ 10.021176] UBIFS (ubi0:1): recovery completed
[ 10.021247] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 10.024576] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.032407] UBIFS (ubi0:1): FS size: 90406912 bytes (86 MiB, 712 LEBs), journal size 4571136 bytes (4 MiB, 36 LEBs)
[ 10.042389] UBIFS (ubi0:1): reserved for root: 4270141 bytes (4170 KiB)
[ 10.052598] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 9FDF7774-9EF6-4922-BC9C-E2EFFB031016, small LPT model
[ 10.069460] mount_root: loading kmods from internal overlay
[ 10.190185] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 10.267499] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 10.268075] scsi host1: usb-storage 1-1:1.0
[ 10.272763] usbcore: registered new interface driver usb-storage
[ 10.276725] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 10.298358] print_req_error: I/O error, dev mtdblock0, sector 0
[ 10.298795] print_req_error: I/O error, dev mtdblock0, sector 8
[ 10.303548] print_req_error: I/O error, dev mtdblock0, sector 16
[ 10.309383] print_req_error: I/O error, dev mtdblock0, sector 24
[ 10.315787] print_req_error: I/O error, dev mtdblock0, sector 0
[ 10.321222] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 10.328496] print_req_error: I/O error, dev mtdblock1, sector 0
[ 10.334703] print_req_error: I/O error, dev mtdblock1, sector 8
[ 10.340460] print_req_error: I/O error, dev mtdblock1, sector 16
[ 10.346438] print_req_error: I/O error, dev mtdblock1, sector 24
[ 10.352653] print_req_error: I/O error, dev mtdblock1, sector 0
[ 10.358199] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 10.449270] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 10.453495] block: extroot: not configured
[ 10.496876] mount_root: switching to ubifs overlay
[ 10.550248] urandom-seed: Seeding with /etc/urandom.seed
[ 10.667338] procd: - early -
[ 10.667530] procd: - watchdog -
[ 11.274563] scsi 1:0:0:0: Direct-Access Ut165 USB Flash Disk 0.00 PQ: 0 ANSI: 2
[ 11.276995] sd 1:0:0:0: [sda] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
[ 11.282095] sd 1:0:0:0: [sda] Write Protect is off
[ 11.289272] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 11.290368] sd 1:0:0:0: [sda] Asking for cache data failed
[ 11.293878] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 11.378590] procd: - watchdog -
[ 11.378955] procd: - ubus -
[ 11.453795] sda: sda1
[ 11.454525] procd: - init -
[ 11.456658] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 11.571533] F2FS-fs (sda1): Mounted with checkpoint version = 80a
[ 11.721401] urngd: v1.0.2 started.
[ 11.733168] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.737827] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.741373] Mirror/redirect action on
[ 11.748213] u32 classifier
[ 11.748228] input device check on
[ 11.750120] Actions configured
[ 11.761636] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 11.769053] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 11.769081] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 11.776606] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.809956] xt_time: kernel timezone is -0000
[ 11.827612] PPP generic driver version 2.4.2
[ 11.828117] NET: Registered protocol family 24
[ 11.837568] ath10k_pci 0000:01:00.0: assign IRQ: got 67
[ 11.837590] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
[ 11.839332] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.844542] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 11.844990] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.026638] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[ 12.026676] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.065081] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[ 12.068690] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
[ 12.072943] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.102166] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 12.102347] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
[ 12.110447] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.136306] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 12.136480] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 12.144603] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.177922] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 12.403485] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.403516] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 12.414237] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc
[ 14.740999] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 20.585190] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 20.585217] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 20.666980] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 20.667828] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
[ 20.924997] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 21.016852] ath: EEPROM regdomain: 0x0
[ 21.016867] ath: EEPROM indicates default country code should be used
[ 21.016878] ath: doing EEPROM country->regdmn map search
[ 21.016897] ath: country maps to regdmn code: 0x3a
[ 21.016912] ath: Country alpha2 being used: US
[ 21.016924] ath: Regpair used: 0x3a
[ 21.025225] ath10k_pci 0001:01:00.0: assign IRQ: got 100
[ 21.025247] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
[ 21.025763] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 21.032112] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 21.032627] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 21.204943] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
[ 21.204974] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 21.343079] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
[ 21.345365] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
[ 21.350934] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 21.402597] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 21.402821] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
[ 21.410890] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 21.443600] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 21.443783] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 21.451805] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 21.479838] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 21.479975] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 21.487768] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 21.499698] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc
[ 23.834373] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[ 29.697592] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 29.697619] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 29.781493] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 29.782376] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
[ 30.130550] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 30.236123] ath: EEPROM regdomain: 0x0
[ 30.236137] ath: EEPROM indicates default country code should be used
[ 30.236148] ath: doing EEPROM country->regdmn map search
[ 30.236168] ath: country maps to regdmn code: 0x3a
[ 30.236182] ath: Country alpha2 being used: US
[ 30.236193] ath: Regpair used: 0x3a
[ 30.245440] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 32.803263] print_req_error: I/O error, dev mtdblock0, sector 0
[ 32.803758] print_req_error: I/O error, dev mtdblock0, sector 8
[ 32.808385] print_req_error: I/O error, dev mtdblock0, sector 16
[ 32.814326] print_req_error: I/O error, dev mtdblock0, sector 24
[ 32.820592] print_req_error: I/O error, dev mtdblock0, sector 0
[ 32.826128] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 32.832498] print_req_error: I/O error, dev mtdblock1, sector 0
[ 32.839520] print_req_error: I/O error, dev mtdblock1, sector 8
[ 32.845414] print_req_error: I/O error, dev mtdblock1, sector 16
[ 32.851249] print_req_error: I/O error, dev mtdblock1, sector 24
[ 32.857639] print_req_error: I/O error, dev mtdblock1, sector 0
[ 32.863109] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 33.491883] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[ 33.492620] dwmac1000: Master AXI performs any burst length
[ 33.500863] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 33.506343] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 33.515331] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.523779] br-guest: port 1(eth1.3) entered blocking state
[ 33.527940] br-guest: port 1(eth1.3) entered disabled state
[ 33.533626] device eth1.3 entered promiscuous mode
[ 33.538963] device eth1 entered promiscuous mode
[ 33.547736] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready
[ 33.578231] br-lan: port 1(eth1.1) entered blocking state
[ 33.578256] br-lan: port 1(eth1.1) entered disabled state
[ 33.582779] device eth1.1 entered promiscuous mode
[ 33.592488] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 33.597163] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[ 33.599647] dwmac1000: Master AXI performs any burst length
[ 33.608745] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 33.614184] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 33.623583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.644273] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 34.553489] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 34.633490] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 40.233995] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 40.234056] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 40.315956] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 40.316799] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
[ 40.671779] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 40.672002] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.688521] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.689081] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 40.694021] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 40.700855] br-lan: port 1(eth1.1) entered blocking state
[ 40.706544] br-lan: port 1(eth1.1) entered forwarding state
[ 40.712244] br-guest: port 1(eth1.3) entered blocking state
[ 40.717475] br-guest: port 1(eth1.3) entered forwarding state
[ 40.723264] br-lan: port 2(wlan0) entered blocking state
[ 40.728954] br-lan: port 2(wlan0) entered disabled state
[ 40.734497] device wlan0 entered promiscuous mode
[ 40.742523] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 40.744603] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[ 41.143464] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 41.433509] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.433674] br-lan: port 2(wlan0) entered blocking state
[ 41.438943] br-lan: port 2(wlan0) entered forwarding state
[ 41.447344] br-guest: port 2(wlan0-1) entered blocking state
[ 41.449519] br-guest: port 2(wlan0-1) entered disabled state
[ 41.455546] device wlan0-1 entered promiscuous mode
[ 41.471068] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[ 41.471102] br-guest: port 2(wlan0-1) entered blocking state
[ 41.476204] br-guest: port 2(wlan0-1) entered forwarding state
[ 41.559528] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 54.002441] ath10k_pci 0000:01:00.0: Invalid peer id 1 or peer stats buffer, peer: dbc3c800 sta: (null)
[ 441.071820] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats
[56896.511596] br-guest: port 2(wlan0-1) entered disabled state
[56896.511670] br-guest: port 1(eth1.3) entered disabled state
[56896.524847] device eth1.3 left promiscuous mode
[56896.524946] br-guest: port 1(eth1.3) entered disabled state
[56896.565000] IPv6: ADDRCONF(NETDEV_UP): eth1.3: link is not ready
[56896.600468] device wlan0-1 left promiscuous mode
[56896.600549] br-guest: port 2(wlan0-1) entered disabled state
[56896.720948] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.720972] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.725683] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.733093] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.738690] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.746120] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.752585] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.759096] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.764813] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.772174] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.777752] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.785171] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.791037] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.798161] ath10k_pci 0000:01:00.0: no vif for vdev_id 1 found
[56896.804356] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.809443] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.815413] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[56896.822784] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[56896.829586] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[56896.835990] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[56896.893098] br-lan: port 2(wlan0) entered disabled state
[56896.893156] br-lan: port 1(eth1.1) entered disabled state
[56896.901579] device eth1.1 left promiscuous mode
[56896.902761] device eth1 left promiscuous mode
[56896.907166] br-lan: port 1(eth1.1) entered disabled state
[56896.944707] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[56897.007040] device wlan0 left promiscuous mode
[56897.007112] br-lan: port 2(wlan0) entered disabled state
[56897.081743] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[56897.081848] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[56899.692926] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[56899.693604] dwmac1000: Master AXI performs any burst length
[56899.701893] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[56899.707294] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[56899.716394] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[56899.724824] br-guest: port 1(eth1.3) entered blocking state
[56899.728988] br-guest: port 1(eth1.3) entered disabled state
[56899.734688] device eth1.3 entered promiscuous mode
[56899.740004] device eth1 entered promiscuous mode
[56899.746066] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready
[56899.776630] br-lan: port 1(eth1.1) entered blocking state
[56899.776655] br-lan: port 1(eth1.1) entered disabled state
[56899.781871] device eth1.1 entered promiscuous mode
[56899.788933] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[56899.797207] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[56899.797955] dwmac1000: Master AXI performs any burst length
[56899.807126] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[56899.814542] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[56899.821629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[56899.830348] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[56900.770390] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[56900.850380] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[56906.210921] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[56906.210948] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[56906.292758] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[56906.293606] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
[56906.646139] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[56906.646417] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56906.657862] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[56906.662660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[56906.668931] br-lan: port 1(eth1.1) entered blocking state
[56906.674494] br-lan: port 1(eth1.1) entered forwarding state
[56906.680526] br-guest: port 1(eth1.3) entered blocking state
[56906.685344] br-guest: port 1(eth1.3) entered forwarding state
[56906.691601] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[56906.697621] br-lan: port 2(wlan0) entered blocking state
[56906.703284] br-lan: port 2(wlan0) entered disabled state
[56906.708775] device wlan0 entered promiscuous mode
[56906.714254] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[56906.718616] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[56907.387516] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[56907.387684] br-lan: port 2(wlan0) entered blocking state
[56907.393032] br-lan: port 2(wlan0) entered forwarding state
[56907.404153] br-guest: port 2(wlan0-1) entered blocking state
[56907.404177] br-guest: port 2(wlan0-1) entered disabled state
[56907.409502] device wlan0-1 entered promiscuous mode
[56907.428056] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[56907.428092] br-guest: port 2(wlan0-1) entered blocking state
[56907.433203] br-guest: port 2(wlan0-1) entered forwarding state
[56907.515877] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[76471.050020] ------------[ cut here ]------------
[76471.050076] WARNING: CPU: 0 PID: 11750 at backports-4.19.120-1/net/wireless/util.c:1147 0xbf309d88 [cfg80211@bf305000+0x37000]
[76471.053720] invalid rate bw=0, mcs=15, nss=4
[76471.065027] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route
[76471.117800] cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb usb_storage f2fs crc32_generic leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug
[76471.156318] CPU: 0 PID: 11750 Comm: hostapd Not tainted 4.14.180 #0
[76471.178450] Hardware name: Generic DT based system
[76471.184708] Function entered at [<c030f1c4>] from [<c030b390>]
[76471.189563] Function entered at [<c030b390>] from [<c07c09c4>]
[76471.195380] Function entered at [<c07c09c4>] from [<c031f878>]
[76471.201195] Function entered at [<c031f878>] from [<c031f8d8>]
[76471.207012] Function entered at [<c031f8d8>] from [<bf309d88>]
[76471.212884] Function entered at [<bf309d88>] from [<bf31783c>]
[76471.218645] Function entered at [<bf31783c>] from [<bf324654>]
[76471.224461] Function entered at [<bf324654>] from [<bf32504c>]
[76471.230275] Function entered at [<bf32504c>] from [<c06e1a1c>]
[76471.236093] Function entered at [<c06e1a1c>] from [<c06e0238>]
[76471.241906] Function entered at [<c06e0238>] from [<c06e0a10>]
[76471.247720] Function entered at [<c06e0a10>] from [<c06dfa48>]
[76471.253537] Function entered at [<c06dfa48>] from [<c06dfe64>]
[76471.259354] Function entered at [<c06dfe64>] from [<c0689d5c>]
[76471.265171] Function entered at [<c0689d5c>] from [<c068a5c4>]
[76471.270984] Function entered at [<c068a5c4>] from [<c0307b60>]
[76471.276894] ---[ end trace 2f58026363a19bec ]---
[141151.066891] br-guest: port 2(wlan0-1) entered disabled state
[141151.066961] br-guest: port 1(eth1.3) entered disabled state
[141151.088230] device eth1.3 left promiscuous mode
[141151.088328] br-guest: port 1(eth1.3) entered disabled state
[141151.119179] IPv6: ADDRCONF(NETDEV_UP): eth1.3: link is not ready
[141151.154603] device wlan0-1 left promiscuous mode
[141151.154684] br-guest: port 2(wlan0-1) entered disabled state
[141151.268968] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.268993] ath10k_pci 0000:01:00.0: no vif for vdev_id 1 found
[141151.275130] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.279773] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.285477] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.292868] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.298669] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.306124] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.312597] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.319347] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.325058] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.332452] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.338242] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.345705] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.352336] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.358929] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.364646] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.372038] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.377824] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.385286] ath10k_pci 0000:01:00.0: received addba event for invalid vdev_id: 1
[141151.391163] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[141151.398505] ath10k_pci 0000:01:00.0: no vif for vdev_id 1 found
[141151.405485] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[141151.410245] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[141151.458197] br-lan: port 2(wlan0) entered disabled state
[141151.458256] br-lan: port 1(eth1.1) entered disabled state
[141151.468773] device eth1.1 left promiscuous mode
[141151.468794] device eth1 left promiscuous mode
[141151.472807] br-lan: port 1(eth1.1) entered disabled state
[141151.508842] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[141151.552142] device wlan0 left promiscuous mode
[141151.552213] br-lan: port 2(wlan0) entered disabled state
[141151.625982] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[141151.626018] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[141154.257570] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[141154.258305] dwmac1000: Master AXI performs any burst length
[141154.266534] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[141154.272384] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[141154.281223] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[141154.290366] br-guest: port 1(eth1.3) entered blocking state
[141154.293980] br-guest: port 1(eth1.3) entered disabled state
[141154.300162] device eth1.3 entered promiscuous mode
[141154.305572] device eth1 entered promiscuous mode
[141154.311239] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready
[141154.336295] br-lan: port 1(eth1.1) entered blocking state
[141154.336319] br-lan: port 1(eth1.1) entered disabled state
[141154.340824] device eth1.1 entered promiscuous mode
[141154.348268] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[141154.357242] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[141154.357922] dwmac1000: Master AXI performs any burst length
[141154.367173] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[141154.372957] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[141154.381801] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[141154.390648] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[141155.352998] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[141155.424519] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[141160.761033] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[141160.761061] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[141160.842976] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[141160.843813] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
[141161.198316] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[141161.198511] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[141161.210128] br-lan: port 2(wlan0) entered blocking state
[141161.214553] br-lan: port 2(wlan0) entered disabled state
[141161.219934] device wlan0 entered promiscuous mode
[141161.225307] br-lan: port 2(wlan0) entered blocking state
[141161.229862] br-lan: port 2(wlan0) entered forwarding state
[141161.236088] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[141161.241828] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[141161.247543] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[141161.254150] br-lan: port 2(wlan0) entered disabled state
[141161.262191] br-lan: port 1(eth1.1) entered blocking state
[141161.265502] br-lan: port 1(eth1.1) entered forwarding state
[141161.271078] br-guest: port 1(eth1.3) entered blocking state
[141161.276717] br-guest: port 1(eth1.3) entered forwarding state
[141161.282482] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[141161.297671] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[141161.939099] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[141161.939218] br-lan: port 2(wlan0) entered blocking state
[141161.944599] br-lan: port 2(wlan0) entered forwarding state
[141161.957596] br-guest: port 2(wlan0-1) entered blocking state
[141161.957623] br-guest: port 2(wlan0-1) entered disabled state
[141161.962475] device wlan0-1 entered promiscuous mode
[141161.988244] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[141161.988280] br-guest: port 2(wlan0-1) entered blocking state
[141161.993320] br-guest: port 2(wlan0-1) entered forwarding state
[141162.076292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment