All the useful info I've gathered regarding the info for making a Shogi-ban and koma.

shogi_set.txt

This is a related question in boardgames.stackexchange.com:
http://boardgames.stackexchange.com/q/10836/4779

===============================================================================
The measurements for the board:

Length . 33.66cm
Width .. 33.33cm
Height . 30.3mm

Measurements for the squares in the board:

Length . 36mm
Width .. 33mm

===============================================================================
The amount of pieces that I will manufacture:

King ........... 2
Rook ........... 2
Bishop ......... 2
Gold General ... 4
Silver General . 4
Knight ......... 4
Lance .......... 4
Pawn ........... 19

===============================================================================
The exact measurements for each piece.
Measurements provided in this order:

Height, width (bottom), thickness, angle (general, bottom > top),
angle (thickness, bottom > top).

King ......................... 32mm 28.7mm 9.7mm  81° 85°
Rook, Bishop ................. 31mm 27.7mm 9.3mm  81° 85°
Gold General, Silver General . 30mm 26.7mm 8.8mm  81° 85°
Knight ....................... 29mm 25.5mm 8.3mm  81° 85°
Lance ........................ 28mm 23.5mm 8.0mm  81° 85°
Pawn ......................... 27mm 22.5mm 7.75mm 81° 85°

Woah bro. That is next level.

Your efforts will not go without reward from the universe 🙏

I hope I helped you out a little!

If anyone makes the set by this gist please post it below here! It would be nice to see your work (I will post mine to it's just under process 😃)