gistfile1.txt

[root@euca-all ~]# euca-get-console-output i-8D313CF6
i-8D313CF6
2013-11-08T16:45:51.119Z
^[[1;256r^[[256;256H^[[6n
Google, Inc.
Serial Graphics Adapter 12/07/11
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@c6b18n1.dev.centos.org) Wed Dec  7 17:04:47 UTC 2011
Term: 80x24
4 0
SeaBIOS (version seabios-0.6.1.2-26.el6)



gPXE (http://etherboot.org) - 00:03.0 C100 PCI2.10 PnP BBS PMM0FE0@10 C100
                                                                               

^[[2J[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-12-virtual (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
[    0.000000] Command line: root=/dev/vda1 console=ttyS0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000fffd000 (usable)
[    0.000000]  BIOS-e820: 000000000fffd000 - 0000000010000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xfffd max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000fda50] fda50
[    0.000000] init_memory_mapping: 0000000000000000-000000000fffd000
[    0.000000] RAMDISK: 0fdc9000 - 0fff0000
[    0.000000] ACPI: RSDP 00000000000fda00 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000000fffd6e0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000000ffffe40 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000000fffd900 024F1 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
[    0.000000] ACPI: FACS 000000000ffffe00 00040
[    0.000000] ACPI: SSDT 000000000fffd860 0009E (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000000fffd770 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 000000000fffd720 0004E (v01   BXPC BXSSDTPC 00000001 INTL 20090123)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000000fffd000
[    0.000000] Initmem setup node 0 0000000000000000-000000000fffd000
[    0.000000]   NODE_DATA [000000000fff5000 - 000000000fff9fff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0000fffd
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:effc0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000fa00000 s79296 r8192 d23104 u2097152
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 64517
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/vda1 console=ttyS0
[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 239608k/262132k available (6206k kernel code, 460k absent, 22064k reserved, 6907k data, 900k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using PMTIMER reference calibration
[    0.000000] Detected 2409.037 MHz processor.
[    0.032228] Calibrating delay loop (skipped), value calculated using timer frequency.. 4818.07 BogoMIPS (lpj=9636148)
[    0.033681] pid_max: default: 32768 minimum: 301
[    0.035702] Security Framework initialized
[    0.038384] AppArmor: AppArmor initialized
[    0.038916] Yama: becoming mindful.
[    0.044171] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.045917] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.047168] Mount-cache hash table entries: 256
[    0.054729] Initializing cgroup subsys cpuacct
[    0.055375] Initializing cgroup subsys memory
[    0.056059] Initializing cgroup subsys devices
[    0.057991] Initializing cgroup subsys freezer
[    0.058665] Initializing cgroup subsys net_cls
[    0.059191] Initializing cgroup subsys blkio
[    0.059767] Initializing cgroup subsys perf_event
[    0.062052] mce: CPU supports 10 MCE banks
[    0.064628] SMP alternatives: switching to UP code
[    0.145291] Freeing SMP alternatives: 24k freed
[    0.146294] ACPI: Core revision 20110413
[    0.175290] ftrace: allocating 26075 entries in 103 pages
[    0.192697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.234308] CPU0: AMD QEMU Virtual CPU version (cpu64-rhel6) stepping 03
[    0.236014] APIC calibration not consistent with PM-Timer: 162ms instead of 100ms
[    0.236014] APIC delta adjusted to PM-Timer: 6249983 (10175792)
[    0.236014] Performance Events: Broken PMU hardware detected, using software events only.
[    0.240108] Brought up 1 CPUs
[    0.240646] Total of 1 processors activated (4818.07 BogoMIPS).
[    0.241890] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[    0.246098] devtmpfs: initialized
[    0.268206] print_constraints: dummy: 
[    0.268870] Time: 16:44:00  Date: 11/08/13
[    0.270518] NET: Registered protocol family 16
[    0.275059] ACPI: bus type pci registered
[    0.277248] PCI: Using configuration type 1 for base access
[    0.292349] bio: create slab <bio-0> at 0
[    0.329547] ACPI: Interpreter enabled
[    0.332088] ACPI: (supports S0 S5)
[    0.332610] ACPI: Using IOAPIC for interrupt routing
[    0.386429] ACPI: No dock devices found.
[    0.388082] HEST: Table not found.
[    0.388470] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.390470] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.396349] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.397247] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.406414]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.443462] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.444621] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.445883] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.448045] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.451493] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[    0.454556] vgaarb: loaded
[    0.458481] SCSI subsystem initialized
[    0.460309] usbcore: registered new interface driver usbfs
[    0.460938] usbcore: registered new interface driver hub
[    0.461887] usbcore: registered new device driver usb
[    0.464321] PCI: Using ACPI for IRQ routing
[    0.469160] NetLabel: Initializing
[    0.469919] NetLabel:  domain hash size = 128
[    0.470919] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.472424] NetLabel:  unlabeled traffic allowed by default
[    0.569851] AppArmor: AppArmor Filesystem Enabled
[    0.570979] pnp: PnP ACPI init
[    0.571511] ACPI: bus type pnp registered
[    0.579041] pnp: PnP ACPI: found 6 devices
[    0.580099] ACPI: ACPI bus type pnp unregistered
[    0.606682] Switching to clocksource acpi_pm
[    0.607845] Switched to NOHz mode on CPU #0
[    0.607845] NET: Registered protocol family 2
[    0.609185] IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.613213] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    0.614305] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.615216] TCP: Hash tables configured (established 8192 bind 8192)
[    0.615931] TCP reno registered
[    0.616787] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.617539] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.618539] NET: Registered protocol family 1
[    0.620011] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.621036] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.621795] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.626576] audit: initializing netlink socket (disabled)
[    0.627984] type=2000 audit(1383929040.624:1): initialized
[    0.712318] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.738540] VFS: Disk quotas dquot_6.5.2
[    0.740337] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.753498] fuse init (API version 7.16)
[    0.758624] msgmni has been set to 468
[    0.765540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.766828] io scheduler noop registered
[    0.767308] io scheduler deadline registered (default)
[    0.768339] io scheduler cfq registered
[    0.770982] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.772056] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.775500] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.776543] ACPI: Power Button [PWRF]
[    0.790174] ERST: Table is not found!
[    0.791536] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.793540] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[    0.796543] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.797914] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[    0.799895] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.800816] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[    0.802540] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.831491] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.871677] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.875546] Linux agpgart interface v0.103
[    0.893540] brd: module loaded
[    0.900543] loop: module loaded
[    0.914536] Trying to unpack rootfs image as initramfs...
[    0.962445]  vda: vda1 vda2 vda3
[    1.000990] scsi0 : ata_piix
[    1.002430] scsi1 : ata_piix
[    1.003649] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[    1.004767] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[    1.009790] Fixed MDIO Bus: probed
[    1.010474] PPP generic driver version 2.4.2
[    1.011588] tun: Universal TUN/TAP device driver, 1.6
[    1.012382] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.020705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.021540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.022430] uhci_hcd: USB Universal Host Controller Interface driver
[    1.023492] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[    1.024816] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    1.025540] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    1.027783] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
[    1.031948] hub 1-0:1.0: USB hub found
[    1.034155] hub 1-0:1.0: 2 ports detected
[    1.035426] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.039132] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.041129] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.042425] mousedev: PS/2 mouse device common for all mice
[    1.044737] rtc_cmos 00:01: RTC can wake from S4
[    1.046437] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.047426] rtc0: alarms up to one day, 114 bytes nvram
[    1.049581] device-mapper: uevent: version 1.0.3
[    1.051544] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.053131] cpuidle: using governor ladder
[    1.053796] cpuidle: using governor menu
[    1.054334] EFI Variables Facility v0.08 2004-May-17
[    1.058174] TCP cubic registered
[    1.059428] NET: Registered protocol family 10
[    1.070435] NET: Registered protocol family 17
[    1.071330] Registering the dns_resolver key type
[    1.074790] registered taskstats version 1
[    1.078845] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.351462] Freeing initrd memory: 2204k freed
[    1.457130]   Magic number: 5:14:742
[    1.459310] rtc_cmos 00:01: setting system clock to 2013-11-08 16:44:02 UTC (1383929042)
[    1.460981] powernow-k8: Processor cpuid 6d3 not supported
[    1.462131] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.463094] EDD information not available.
[    1.479132] Freeing unused kernel memory: 900k freed
[    1.499130] Write protecting the kernel read-only data: 12288k
[    1.559131] Freeing unused kernel memory: 1968k freed
[    1.602325] Freeing unused kernel memory: 1368k freed

info: initramfs: up at 1.68
info: copying initramfs to /dev/vda1
NOCHANGE: partition 1 is size 49152. it cannot be grown
info: initramfs loading root from /dev/vda1
info: /etc/init.d/rc.sysinit: up at 6.01
Starting logging: OK
Initializing random number generator... done.
Starting network...
udhcpc (v1.18.5) started
Sending discover...
Sending select for 10.0.2.16...
Lease of 10.0.2.16 obtained, lease time 86400
deleting routers
route: SIOCDELRT: No such process
adding dns 10.0.2.3
cloud-setup: checking http://169.254.169.254/2009-04-04/meta-data/instance-id