uyjulian

How to install Homebrew package manager on Steam Deck

(See also installing Distrobox: https://distrobox.it/ )
(See also installing Nix package manager: https://determinate.systems/posts/nix-on-the-steam-deck )

You can install Homebrew (a package manager for macOS and Linux) without disabling the read-only partition with sudo steamos-readonly disable.
The package manager can be used alongside Flatpaks. Some software is only available on Flathub, and some software is only available on Homebrew.

1. Switch to desktop mode (hold power button until a menu appears, then select "Switch to desktop mode")
2. Click the logo at the bottom left, go to System, then go to Konsole

matthewpalmer

# Example YAML configuration for the sidecar pattern.

# It defines a main application container which writes
# the current date to a log file every five seconds.

# The sidecar container is nginx serving that log file.
# (In practice, your sidecar is likely to be a log collection
# container that uploads to external storage.)

# To run:

mill1000

About

This gist will show how to setup Raspbian Stretch as a headless Bluetooth A2DP audio sink. This will allow your phone, laptop or other Bluetooth device to play audio wirelessly through a Rasperry Pi.

Motivation

A quick search will turn up a plethora of tutorials on setting up A2DP on the Raspberry Pi. However, I felt this gist was necessary because this solution is:

• Automatic & Headless - Once setup, the system is entirely automatic. No user iteration is required to pair, connect or start playback. Therefore the Raspberry Pi can be run headless.
• Simple - This solution has few dependencies, readily available packages and minimal configuration.
• Up to date - As of December 2017. Written for Raspbian Stretch & Bluez 5.43

Prerequisites

klalle

/* Melbus CDCHGR Emulator
 * Program that emulates the MELBUS communication from a CD-changer (CD-CHGR) in a Volvo V70 (HU-xxxx) to enable AUX-input through the 8-pin DIN-contact. 
 * This setup is using an Arduino Nano 5v clone
 * 
 * The HU enables the CD-CHGR in its source-menue after a successful initialization procedure is accomplished. 
 * The HU will remove the CD-CHGR everytime the car starts if it wont get an response from CD-CHGR (second init-procedure).
 * 
 * Karl Hagström 2015-11-04
 * mod by S. Zeller 2016-03-14
 * 

jasonwhite

/**
 * Author: Jason White
 *
 * Description:
 * Reads joystick/gamepad events and displays them.
 *
 * Compile:
 * gcc joystick.c -o joystick
 *
 * Run: