Created
June 6, 2020 14:47
-
-
Save gs-niteesh/9c6beca5f00c1f0ddb103fb69a2f8161 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.06.06 20:16:29 =~=~=~=~=~=~=~=~=~=~=~= | |
U-Boot SPL 2020.04-00684-gd202f67db0 (Apr 26 2020 - 23:05:26 +0530) | |
Trying to boot from MMC1 | |
U-Boot 2020.04-00684-gd202f67db0 (Apr 26 2020 - 23:05:26 +0530) | |
CPU : AM335X-GP rev 2.1 | |
Model: TI AM335x PocketBeagle | |
DRAM: 512 MiB | |
WDT: Started with servicing (60s timeout) | |
NAND: 0 MiB | |
MMC: OMAP SD/MMC: 0 | |
Loading Environment from FAT... OK | |
Net: No ethernet found. | |
Hit any key to stop autoboot: 1 0 | |
1373919 bytes read in 92 ms (14.2 MiB/s) | |
124143 bytes read in 11 ms (10.8 MiB/s) | |
## Booting kernel from Legacy Image at 80800000 ... | |
Image Name: RTEMS | |
Created: 2020-06-06 14:18:18 UTC | |
Image Type: ARM Linux Kernel Image (gzip compressed) | |
Data Size: 1373855 Bytes = 1.3 MiB | |
Load Address: 80000000 | |
Entry Point: 80000000 | |
Verifying Checksum ... OK | |
## Flattened Device Tree blob at 88000000 | |
Booting using the fdt blob at 0x88000000 | |
Uncompressing Kernel Image | |
Loading Device Tree to 8ffde000, end 8ffff4ee ... OK | |
Starting kernel ... | |
RTEMS Beagleboard: am335x-based | |
ARM Debug: 0x4b141000 | |
AM335X I2C bus registering | |
registering generic node | |
*** BEGIN OF TEST LIBBSD MEDIA 1 *** | |
*** TEST VERSION: 5.0.0.617e0022dc08417b8d9ee7b917b9d2c5002c9623-modified | |
*** TEST STATE: USER_INPUT | |
*** TEST BUILD: RTEMS_POSIX_API | |
*** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB 5 (0affb6647dd4), Newlib 7947581) | |
nexus0: <RTEMS Nexus device> | |
ofwbus0: <Open Firmware Device Tree> on nexus0 | |
simplebus0: <Flattened device tree simple bus> on ofwbus0 | |
simplebus1: <Flattened device tree simple bus> on simplebus0 | |
am335x_prcm0: <AM335x Power and Clock Management> mem 0x200000-0x203fff on simplebus1 | |
simplebus2: <Flattened device tree simple bus> mem 0x210000-0x211fff on simplebus1 | |
ti_scm0: <TI Control Module> mem 0-0x7ff on simplebus2 | |
ofwbus0: <opp-table> compat operating-points-v2-ti-cpu (no driver attached) | |
ofwbus0: <pmu@4b000000> mem 0x4b000000-0x4bffffff irq 3 compat arm,cortex-a8-pmu (no driver attached) | |
ofwbus0: <soc> compat ti,omap-infra (no driver attached) | |
simplebus1: <wkup_m3@100000> mem 0x100000-0x103fff,0x180000-0x181fff compat ti,am3352-wkup-m3 (no driver attached) | |
am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz | |
ti_pinmux0: <TI Pinmux Module> mem 0x800-0xa37 on simplebus2 | |
Processing 1 pin-config node(s) in pinctrl-0 for i2c@44e0b000 | |
pinmux-i2c0-pins: muxreg 0x0188 muxval 0x30 | |
pinmux-i2c0-pins: muxreg 0x018c muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for mmc@48060000 | |
pinmux-mmc0-pins: muxreg 0x0160 muxval 0x2f | |
pinmux-mmc0-pins: muxreg 0x00fc muxval 0x30 | |
pinmux-mmc0-pins: muxreg 0x00f8 muxval 0x30 | |
pinmux-mmc0-pins: muxreg 0x00f4 muxval 0x30 | |
pinmux-mmc0-pins: muxreg 0x00f0 muxval 0x30 | |
pinmux-mmc0-pins: muxreg 0x0104 muxval 0x30 | |
pinmux-mmc0-pins: muxreg 0x0100 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_02_pinmux | |
pinmux_P1_02_default_pin: muxreg 0x00e4 muxval 0x2f | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_04_pinmux | |
pinmux_P1_04_default_pin: muxreg 0x00ec muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_06_pinmux | |
pinmux_P1_06_default_pin: muxreg 0x015c muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_08_pinmux | |
pinmux_P1_08_default_pin: muxreg 0x0150 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_10_pinmux | |
pinmux_P1_10_default_pin: muxreg 0x0154 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_12_pinmux | |
pinmux_P1_12_default_pin: muxreg 0x0158 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_20_pinmux | |
pinmux_P1_20_default_pin: muxreg 0x01b4 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_26_pinmux | |
pinmux_P1_26_default_pin: muxreg 0x0178 muxval 0x33 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_28_pinmux | |
pinmux_P1_28_default_pin: muxreg 0x017c muxval 0x33 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_29_pinmux | |
pinmux_P1_29_default_pin: muxreg 0x01ac muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_30_pinmux | |
pinmux_P1_30_default_pin: muxreg 0x0174 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_31_pinmux | |
pinmux_P1_31_default_pin: muxreg 0x01a0 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_32_pinmux | |
pinmux_P1_32_default_pin: muxreg 0x0170 muxval 0x30 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_33_pinmux | |
pinmux_P1_33_default_pin: muxreg 0x0194 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_34_pinmux | |
pinmux_P1_34_default_pin: muxreg 0x0028 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_35_pinmux | |
pinmux_P1_35_default_pin: muxreg 0x00e8 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P1_36_pinmux | |
pinmux_P1_36_default_pin: muxreg 0x0190 muxval 0x21 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_01_pinmux | |
pinmux_P2_01_default_pin: muxreg 0x0048 muxval 0x26 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_02_pinmux | |
pinmux_P2_02_default_pin: muxreg 0x006c muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_03_pinmux | |
pinmux_P2_03_default_pin: muxreg 0x0024 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_04_pinmux | |
pinmux_P2_04_default_pin: muxreg 0x0068 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_05_pinmux | |
pinmux_P2_05_default_pin: muxreg 0x0070 muxval 0x36 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_06_pinmux | |
pinmux_P2_06_default_pin: muxreg 0x0064 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_07_pinmux | |
pinmux_P2_07_default_pin: muxreg 0x0074 muxval 0x36 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_08_pinmux | |
pinmux_P2_08_default_pin: muxreg 0x0078 muxval 0x37 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_09_pinmux | |
pinmux_P2_09_default_pin: muxreg 0x0184 muxval 0x33 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_10_pinmux | |
pinmux_P2_10_default_pin: muxreg 0x0050 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_11_pinmux | |
pinmux_P2_11_default_pin: muxreg 0x0180 muxval 0x33 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_17_pinmux | |
pinmux_P2_17_default_pin: muxreg 0x008c muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_18_pinmux | |
pinmux_P2_18_default_pin: muxreg 0x003c muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_19_pinmux | |
pinmux_P2_19_default_pin: muxreg 0x002c muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_20_pinmux | |
pinmux_P2_20_default_pin: muxreg 0x0088 muxval 0x37 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_22_pinmux | |
pinmux_P2_22_default_pin: muxreg 0x0038 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_24_pinmux | |
pinmux_P2_24_default_pin: muxreg 0x0030 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_25_pinmux | |
pinmux_P2_25_default_pin: muxreg 0x016c muxval 0x34 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_27_pinmux | |
pinmux_P2_27_default_pin: muxreg 0x0168 muxval 0x34 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_28_pinmux | |
pinmux_P2_28_default_pin: muxreg 0x01a8 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_29_pinmux | |
pinmux_P2_29_default_pin: muxreg 0x0164 muxval 0x34 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_30_pinmux | |
pinmux_P2_30_default_pin: muxreg 0x019c muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_31_pinmux | |
pinmux_P2_31_default_pin: muxreg 0x01b0 muxval 0x34 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_32_pinmux | |
pinmux_P2_32_default_pin: muxreg 0x0198 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_33_pinmux | |
pinmux_P2_33_default_pin: muxreg 0x0034 muxval 0x27 | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_34_pinmux | |
pinmux_P2_34_default_pin: muxreg 0x01a4 muxval 0x2e | |
Processing 1 pin-config node(s) in pinctrl-0 for P2_35_pinmux | |
pinmux_P2_35_default_pin: muxreg 0x00e0 muxval 0x2f | |
Processing 1 pin-config node(s) in pinctrl-0 for leds | |
pinmux-usr-leds-pins: muxreg 0x0054 muxval 0x0f | |
pinmux-usr-leds-pins: muxreg 0x0058 muxval 0x0f | |
pinmux-usr-leds-pins: muxreg 0x005c muxval 0x0f | |
pinmux-usr-leds-pins: muxreg 0x0060 muxval 0x0f | |
simplebus2: <wkup_m3_ipc@1324> mem 0x1324-0x1347 irq 78 compat ti,am3352-wkup-m3-ipc (no driver attached) | |
simplebus2: <dma-router@f90> mem 0xf90-0xfcf compat ti,am335x-edma-crossbar (no driver attached) | |
simplebus0: <interrupt-controller@48200000> mem 0x48200000-0x48200fff compat ti,am33xx-intc (no driver attached) | |
simplebus0: <edma@49000000> mem 0x49000000-0x4900ffff irq 12,13,14 compat ti,edma3-tpcc (no driver attached) | |
simplebus0: <tptc@49800000> mem 0x49800000-0x498fffff irq 112 compat ti,edma3-tptc (no driver attached) | |
simplebus0: <tptc@49900000> mem 0x49900000-0x499fffff irq 113 compat ti,edma3-tptc (no driver attached) | |
simplebus0: <tptc@49a00000> mem 0x49a00000-0x49afffff irq 114 compat ti,edma3-tptc (no driver attached) | |
simplebus0: <gpio@44e07000> mem 0x44e07000-0x44e07fff irq 96 compat ti,omap4-gpio (no driver attached) | |
simplebus0: <gpio@4804c000> mem 0x4804c000-0x4804cfff irq 98 compat ti,omap4-gpio (no driver attached) | |
simplebus0: <gpio@481ac000> mem 0x481ac000-0x481acfff irq 32 compat ti,omap4-gpio (no driver attached) | |
simplebus0: <gpio@481ae000> mem 0x481ae000-0x481aefff irq 62 compat ti,omap4-gpio (no driver attached) | |
simplebus0: <serial@44e09000> mem 0x44e09000-0x44e0afff irq 72 compat ti,am3352-uart (no driver attached) | |
simplebus0: <serial@48022000> mem 0x48022000-0x48023fff irq 73 compat ti,am3352-uart (no driver attached) | |
simplebus0: <serial@48024000> mem 0x48024000-0x48025fff irq 74 compat ti,am3352-uart (no driver attached) | |
simplebus0: <serial@481a6000> mem 0x481a6000-0x481a7fff irq 44 disabled compat ti,am3352-uart (no driver attached) | |
simplebus0: <serial@481a8000> mem 0x481a8000-0x481a9fff irq 45 compat ti,am3352-uart (no driver attached) | |
simplebus0: <serial@481aa000> mem 0x481aa000-0x481abfff irq 46 disabled compat ti,am3352-uart (no driver attached) | |
simplebus0: <i2c@44e0b000> mem 0x44e0b000-0x44e0bfff irq 70 compat ti,omap4-i2c (no driver attached) | |
simplebus0: <i2c@4802a000> mem 0x4802a000-0x4802afff irq 71 compat ti,omap4-i2c (no driver attached) | |
simplebus0: <i2c@4819c000> mem 0x4819c000-0x4819cfff irq 30 compat ti,omap4-i2c (no driver attached) | |
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 64 on simplebus0 | |
sdhci_ti0-slot0: 96MHz HS 4bits VDD: 3.3V 3.0V VCCQ: 3.3V DRV: B PIO removable | |
sdhci_ti0-slot0: ============== REGISTER DUMP ============== | |
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version: 0x00003101 | |
sdhci_ti0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
sdhci_ti0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 | |
sdhci_ti0-slot0: Present: 0x01f70000 | Host ctl: 0x00000000 | |
sdhci_ti0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 | |
sdhci_ti0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 | |
sdhci_ti0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 | |
sdhci_ti0-slot0: Int enab: 0x00000000 | Sig enab: 0x00000000 | |
sdhci_ti0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 | |
sdhci_ti0-slot0: Caps: 0x07e10080 | Caps2: 0x00000000 | |
sdhci_ti0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 | |
sdhci_ti0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 | |
sdhci_ti0-slot0: =========================================== | |
sdhci_ti0-slot0: Card inserted | |
mmc0: <MMC/SD bus> on sdhci_ti0 | |
simplebus0: <mmc@481d8000> mem 0x481d8000-0x481d8fff irq 28 disabled compat ti,omap4-hsmmc (no driver attached) | |
simplebus0: <mmc@47810000> mem 0x47810000-0x47810fff irq 29 disabled compat ti,omap4-hsmmc (no driver attached) | |
simplebus0: <spinlock@480ca000> mem 0x480ca000-0x480cafff compat ti,omap4-hwspinlock (no driver attached) | |
simplebus0: <wdt@44e35000> mem 0x44e35000-0x44e35fff irq 91 compat ti,omap3-wdt (no driver attached) | |
simplebus0: <can@481cc000> mem 0x481cc000-0x481cdfff irq 52 compat ti,am3352-d_can (no driver attached) | |
simplebus0: <can@481d0000> mem 0x481d0000-0x481d1fff irq 55 compat ti,am3352-d_can (no driver attached) | |
simplebus0: <mailbox@480c8000> mem 0x480c8000-0x480c81ff irq 77 compat ti,omap4-mailbox (no driver attached) | |
simplebus0: <timer@44e31000> mem 0x44e31000-0x44e313ff irq 67 compat ti,am335x-timer-1ms (no driver attached) | |
simplebus0: <timer@48040000> mem 0x48040000-0x480403ff irq 68 compat ti,am335x-timer (no driver attached) | |
simplebus0: <timer@48042000> mem 0x48042000-0x480423ff irq 69 compat ti,am335x-timer (no driver attached) | |
simplebus0: <timer@48044000> mem 0x48044000-0x480443ff irq 92 compat ti,am335x-timer (no driver attached) | |
simplebus0: <timer@48046000> mem 0x48046000-0x480463ff irq 93 compat ti,am335x-timer (no driver attached) | |
simplebus0: <timer@48048000> mem 0x48048000-0x480483ff irq 94 compat ti,am335x-timer (no driver attached) | |
simplebus0: <timer@4804a000> mem 0x4804a000-0x4804a3ff irq 95 compat ti,am335x-timer (no driver attached) | |
simplebus0: <rtc@44e3e000> mem 0x44e3e000-0x44e3efff irq 75,76 compat ti,am3352-rtc (no driver attached) | |
simplebus0: <spi@48030000> mem 0x48030000-0x480303ff irq 65 compat ti,omap4-mcspi (no driver attached) | |
simplebus0: <spi@481a0000> mem 0x481a0000-0x481a03ff irq 125 compat ti,omap4-mcspi (no driver attached) | |
usbss0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff on simplebus0 | |
usbss0: TI AM335X USBSS v0.0.13 | |
usbss0: <control@44e10620> mem 0x44e10620-0x44e1062f,0x44e10648-0x44e1064b compat ti,am335x-usb-ctrl-module (no driver attached) | |
usbss0: <usb-phy@47401300> mem 0x47401300-0x474013ff compat ti,am335x-usb-phy (no driver attached) | |
musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47401400-0x474017ff,0x47401000-0x474011ff irq 18 on usbss0 | |
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM | |
usbus0 on musbotg0 | |
usbss0: <usb-phy@47401b00> mem 0x47401b00-0x47401bff compat ti,am335x-usb-phy (no driver attached) | |
musbotg1: <TI AM33xx integrated USB OTG controller> mem 0x47401c00-0x47401fff,0x47401800-0x474019ff irq 19 on usbss0 | |
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM | |
usbus1 on musbotg1 | |
usbss0: <dma-controller@47402000> mem 0x47400000-0x47400fff,0x47402000-0x47402fff,0x47403000-0x47403fff,0x47404000-0x47407fff irq 17 compat ti,am3359-cppi41 (no driver attached) | |
am335x_pwmss0: <AM335x PWM> mem 0x48300000-0x4830000f on simplebus0 | |
am335x_pwmss0: <ecap@48300100> mem 0x48300100-0x4830017f irq 31 disabled compat ti,am3352-ecap (no driver attached) | |
am335x_pwmss0: <eqep@0x48300180> mem 0x48300180-0x483001ff irq 79 disabled compat ti,am33xx-eqep (no driver attached) | |
am335x_pwmss0: <pwm@48300200> mem 0x48300200-0x4830027f compat ti,am3352-ehrpwm (no driver attached) | |
am335x_pwmss1: <AM335x PWM> mem 0x48302000-0x4830200f on simplebus0 | |
am335x_pwmss1: <ecap@48302100> mem 0x48302100-0x4830217f irq 47 disabled compat ti,am3352-ecap (no driver attached) | |
am335x_pwmss1: <eqep@0x48302180> mem 0x48302180-0x483021ff irq 88 disabled compat ti,am33xx-eqep (no driver attached) | |
am335x_pwmss1: <pwm@48302200> mem 0x48302200-0x4830227f compat ti,am3352-ehrpwm (no driver attached) | |
am335x_pwmss2: <AM335x PWM> mem 0x48304000-0x4830400f on simplebus0 | |
am335x_pwmss2: <ecap@48304100> mem 0x48304100-0x4830417f irq 61 disabled compat ti,am3352-ecap (no driver attached) | |
am335x_pwmss2: <eqep@0x48304180> mem 0x48304180-0x483041ff irq 89 disabled compat ti,am33xx-eqep (no driver attached) | |
am335x_pwmss2: <pwm@48304200> mem 0x48304200-0x4830427f compat ti,am3352-ehrpwm (no driver attached) | |
simplebus0: <ethernet@4a100000> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 40,41,42,43 disabled compat ti,am335x-cpsw (no driver attached) | |
simplebus0: <ocmcram@40300000> mem 0x40300000-0x4030ffff compat mmio-sram (no driver attached) | |
simplebus0: <pruss-soc-bus@4a326004> mem 0x4a326004-0x4a326007 disabled compat ti,am3356-pruss-soc-bus (no driver attached) | |
simplebus0: <elm@48080000> mem 0x48080000-0x48081fff irq 4 disabled compat ti,am3352-elm (no driver attached) | |
simplebus0: <lcdc@4830e000> mem 0x4830e000-0x4830efff irq 36 disabled compat ti,am33xx-tilcdc (no driver attached) | |
simplebus0: <tscadc@44e0d000> mem 0x44e0d000-0x44e0dfff irq 16 compat ti,am3359-tscadc (no driver attached) | |
simplebus0: <emif@4c000000> mem 0x4c000000-0x4cffffff irq 101 compat ti,emif-am3352 (no driver attached) | |
simplebus0: <gpmc@50000000> mem 0x50000000-0x50001fff irq 100 disabled compat ti,am3352-gpmc (no driver attached) | |
simplebus0: <sham@53100000> mem 0x53100000-0x531001ff irq 109 compat ti,omap4-sham (no driver attached) | |
simplebus0: <aes@53500000> mem 0x53500000-0x5350009f irq 103 compat ti,omap4-aes (no driver attached) | |
simplebus0: <mcasp@48038000> mem 0x48038000-0x48039fff,0x46000000-0x463fffff irq 80,81 disabled compat ti,am33xx-mcasp-audio (no driver attached) | |
simplebus0: <mcasp@4803c000> mem 0x4803c000-0x4803dfff,0x46400000-0x467fffff irq 82,83 disabled compat ti,am33xx-mcasp-audio (no driver attached) | |
simplebus0: <rng@48310000> mem 0x48310000-0x48311fff irq 111 compat ti,omap4-rng (no driver attached) | |
simplebus0: <sgx@56000000> mem 0x56000000-0x5600ffff irq 37 compat ti,am3352-sgx530 (no driver attached) | |
simplebus0: <P1_02_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_04_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_06_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_08_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_10_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_12_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_20_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_26_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_28_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_29_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_30_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_31_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_32_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_33_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_34_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_35_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P1_36_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_01_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_02_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_03_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_04_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_05_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_06_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_07_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_08_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_09_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_10_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_11_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_17_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_18_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_19_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_20_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_22_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_24_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_25_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_27_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_28_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_29_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_30_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_31_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_32_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_33_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_34_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <P2_35_pinmux> compat bone-pinmux-helper (no driver attached) | |
simplebus0: <cape-universal> compat gpio-of-helper (no driver attached) | |
ofwbus0: <leds> compat gpio-leds (no driver attached) | |
ofwbus0: <fixedregulator0> compat regulator-fixed (no driver attached) | |
vlan: initialized, using hash tables with chaining | |
info: lo0: bpf attached | |
_bsd_tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 | |
sdhci_ti0-slot0: Divider 128 for freq 375000 (base 96000000) | |
mmc0: Probing bus | |
mmc0: SD 2.0 interface conditions: OK | |
mmc0: SD probe: OK (OCR: 0x00ff8000) | |
mmc0: Current OCR: 0x00ff8000 | |
mmc0: Probing cards | |
mmc0: New card detected (CID 1b534d3030303030103a5b55af0101ab) | |
mmc0: New card detected (CSD 400e00325b590000775d7f800a4000a3) | |
mmc0: Card at relative address 0x59b4 added: | |
mmc0: card: SDHC 00000 1.0 SN 3A5B55AF MFG 01/2016 by 27 SM | |
mmc0: quirks: 0 | |
mmc0: bus: 4bit, 50MHz (high speed timing) | |
mmc0: memory: 31291392 blocks, erase sector 8192 blocks | |
mmc0: setting transfer rate to 50.000MHz (high speed timing) | |
sdhci_ti0-slot0: Divider 1 for freq 48000000 (base 96000000) | |
media listener: event = DISK ATTACH, state = INQUIRY, src = mmcsd, dest = NULL | |
mmc0: setting bus width to 4 bits high speed timing | |
media listener: event = DISK ATTACH, state = SUCCESS, src = mmcsd, dest = /dev/mmcsd-0 | |
media listener: event = MOUNT, state = INQUIRY, src = /dev/mmcsd-0, dest = NULL | |
mmcsd0: 16GB <SDHC 00000 1.0 SN 3A5B55AF MFG 01/2016 by 27 SM> at mmc0 48.0MHz/4bit/65535-block | |
media listener: event = MOUNT, state = FAILED, src = /dev/mmcsd-0, dest = NULL | |
media listener: event = PARTITION INQUIRY, state = INQUIRY, src = /dev/mmcsd-0, dest = NULL | |
media listener: event = PARTITION INQUIRY, state = SUCCESS, src = /dev/mmcsd-0, dest = NULL | |
media listener: event = PARTITION ATTACH, state = INQUIRY, src = /dev/mmcsd-0, dest = NULL | |
media listener: event = PARTITION ATTACH, state = SUCCESS, src = /dev/mmcsd-0, dest = /dev/mmcsd-0-0 | |
media listener: event = MOUNT, state = INQUIRY, src = /dev/mmcsd-0-0, dest = NULL | |
usbus0: 480Mbps High Speed USB v2.0 | |
usbus1: 480Mbps High Speed USB v2.0 | |
media listener: event = MOUNT, state = SUCCESS, src = /dev/mmcsd-0-0, dest = /media/mmcsd-0-0 | |
write file /media/mmcsd-0-0/test.txt | |
info: lo0: link state changed to UP | |
error opening file | |
ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0 | |
uhub0 on usbus0 | |
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
ugen1.1: <Mentor Graphics OTG Root HUB> at usbus1 | |
uhub1 on usbus1 | |
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
media listener open file: File exists | |
Successfully written to file | |
info: ftpd: FTP daemon started (4 sessions max) | |
info: telnetd: started successfully on port 23 | |
RTEMS Shell on /dev/console. Use 'help' to list commands. | |
SHLL [/] # info: version 6.2.1 starting | |
err: no valid interfaces found | |
warning: no interfaces have a carrier | |
uhub0: 1 port with 1 removable, self powered | |
uhub1: 1 port with 1 removable, self powered | |
ugen0.2: <Unknown > at usbus0 (disconnected) | |
SHLL [/] # cd media/mmcsd-9- 0-0ugen0.2: <Unknown > at usbus0 (disconnected) | |
SHLL [/media/mmcsd-0-0] # ls | |
SHLL [/media/mmcsd-0-0] # ls | |
SHLL [/media/mmcsd-0-0] # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment