Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
openSSH-5.8p1 - Makefile
# $Id: Makefile.in,v 1.1 2011-04-06 00:47:31 jimlin Exp $
# uncomment if you run a non bourne compatable shell. Ie. csh
#SHELL = /bin/sh
# Modified Makefile for Synology's openssh-5.8p1
#
# source code: http://sourceforge.net/projects/dsgpl/
# v2636 branch: http://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/2636branch/
#
#
#-- Modified by Gui Ambros, 2013-01-20
#-- History:
#
# 2013-01-20 - adjust paths and libraries to cross-compile under Ubuntu 12.10
#
#-- Instructions:
# - adjust the variables below
# - run make sshd ssh
# - strip the symbols from the binaries (using /usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-strip)
# - move to your Synology box
# - enjoy.
#
#-- Bugs & Limitations:
# - If you try to use ld as your linker (adjusting the variable LD below), you'll get:
# "warning: cannot find entry symbol _start; defaulting to 0000b854" when compiling.
# Basically ld is sensistive to the order of your libraries, while gcc is more robust,
# and can do the same job. I didn't want to spend more time tracking it, so I just used gcc instead.
#
# - The default PATH for non-interctive sessions (e.g., scp) is hard-coded within sshd. It defaults to
# /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin, but Synology stores its binaries under /usr/syno/sbin
# (like scp, for example). So you have to adjust the _PATH_STDPATH and SUPERUSER_PATH, like done below
#
# There's just one drawback: defines.h overrides _PATH_STDPATH, copying the value of USER_PATH (that is
# in config.h. Confused? Yeah. But fear not, just add the following line to config.h (#1410):
#
# /* Specify default $PATH */
# #define USER_PATH "/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/syno/bin"
#
AUTORECONF=autoreconf
prefix=/usr/local
exec_prefix=${prefix}
bindir=${exec_prefix}/bin
sbindir=${exec_prefix}/sbin
libexecdir=${exec_prefix}/libexec
datadir=${datarootdir}
datarootdir=${prefix}/share
mandir=${datarootdir}/man
mansubdir=man
# original line: sysconfdir=${prefix}/etc
# changed to mimic Synology's binary default behavior:
sysconfdir=/etc/ssh
piddir=/var/run
srcdir=.
top_srcdir=.
DESTDIR=
SSH_PROGRAM=${exec_prefix}/bin/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server
SSH_KEYSIGN=$(libexecdir)/ssh-keysign
SSH_PKCS11_HELPER=$(libexecdir)/ssh-pkcs11-helper
RAND_HELPER=$(libexecdir)/ssh-rand-helper
PRIVSEP_PATH=/var/empty
SSH_PRIVSEP_USER=sshd
STRIP_OPT=-s
#-- Key environment variables. You may need to change, according to your environment
#--
PATHS= -DSSHDIR=\"$(sysconfdir)\" \
-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
-D_PATH_SSH_KEY_SIGN=\"$(SSH_KEYSIGN)\" \
-D_PATH_SSH_PKCS11_HELPER=\"$(SSH_PKCS11_HELPER)\" \
-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
-D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\" \
-DSSH_RAND_HELPER=\"$(RAND_HELPER)\" \
-DSUPERUSER_PATH=\"/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/syno/bin\" \
-D_PATH_STDPATH=\"/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/syno/bin\"
# See comment above for explanation of the last 2 lines
CC=/usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc
LD=/usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc
AR=/usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ar
RANLIB=/usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ranlib
STRIP=/usr/local/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-strip
CFLAGS=-g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wformat-security -Wno-pointer-sign -fno-strict-aliasing -fno-builtin-memset -fstack-protector-all -I/usr/local/source/linux-2.6.32/include -I/usr/local/source/libxml2-2.7/include -I/usr/local/source/lnxlibnet/include -I/usr/local/source/icu22/usr/syno/include -I/usr/local/source/icu22/source/common -L/usr/local/source/icu22/lib -I/usr/local/source/libsynosdk/gpl -L/usr/local/source/libsynocore/gpl/ -I/usr/local/source/libsynorecycle/include -I/usr/local/source/libsynocore/gpl -I/usr/local/source/libsynoflashcache/include -I/usr/local/source/libsynoacl/include -I/usr/local/source/synologd/include -I/usr/syno/include -I/usr/syno/include/libxml2 -I/usr/local/include -DUSE_PAM -I/usr/local/source/pam-0.99.3.0/libpam/include -DHAVE_SECURITY_PAM_APPL_H -DHAVE_PAM_GETENVLIST
LDFLAGS=-L. -Lopenbsd-compat/ -L/usr/local/source/libsynobandwidth/lib -L/usr/local/lib
CPPFLAGS=-I. -I$(srcdir) $(PATHS) -DHAVE_CONFIG_H -DUSE_PAM -DHAVE_SECURITY_PAM_APPL_H -DHAVE_PAM_GETENVLIST
LIBS=-lcrypto -ldl -lutil -lz -lnsl -lcrypt -lresolv -lsynocore -lsynogpl -lsynobandwidth -lsynorecycle -licui18n -licuuc -licudata -lxml2 -lsynocoregpl -lsynoacl -lsynolog -lpam
# define if you want to strip your debug symbols
STRIP_SYM=yes
#--
SSHLIBS=
SSHDLIBS=
LIBEDIT=
AWK=mawk
INSTALL=/usr/bin/install -c
PERL=/usr/bin/perl
SED=/bin/sed
ENT=
XAUTH_PATH=/usr/bin/xauth
EXEEXT=
MANFMT=/usr/bin/nroff -mandoc
INSTALL_SSH_PRNG_CMDS=
INSTALL_SSH_RAND_HELPER=
TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-keysign${EXEEXT} ssh-pkcs11-helper$(EXEEXT) ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} sftp-server$(EXEEXT) sftp$(EXEEXT)
LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o bufbn.o buffer.o \
canohost.o channels.o cipher.o cipher-acss.o cipher-aes.o \
cipher-bf1.o cipher-ctr.o cipher-3des1.o cleanup.o \
compat.o compress.o crc32.o deattack.o fatal.o hostfile.o \
log.o match.o md-sha256.o moduli.o nchan.o packet.o \
readpass.o rsa.o ttymodes.o xmalloc.o addrmatch.o \
atomicio.o key.o dispatch.o kex.o mac.o uidswap.o uuencode.o misc.o \
monitor_fdpass.o rijndael.o ssh-dss.o ssh-ecdsa.o ssh-rsa.o dh.o \
kexdh.o kexgex.o kexdhc.o kexgexc.o bufec.o kexecdh.o kexecdhc.o \
msg.o progressmeter.o dns.o entropy.o gss-genr.o umac.o jpake.o \
schnorr.o ssh-pkcs11.o
SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \
sshconnect.o sshconnect1.o sshconnect2.o mux.o \
roaming_common.o roaming_client.o
SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o \
audit.o audit-bsm.o audit-linux.o platform.o \
sshpty.o sshlogin.o servconf.o serverloop.o \
auth.o auth1.o auth2.o auth-options.o session.o \
auth-chall.o auth2-chall.o groupaccess.o \
auth-skey.o auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \
auth2-none.o auth2-passwd.o auth2-pubkey.o auth2-jpake.o \
monitor_mm.o monitor.o monitor_wrap.o kexdhs.o kexgexs.o kexecdhs.o \
auth-krb5.o \
auth2-gss.o gss-serv.o gss-serv-krb5.o \
loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \
sftp-server.o sftp-common.o sftp-synolib.o \
roaming_common.o roaming_serv.o
MANPAGES = moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out ssh-pkcs11-helper.8.out sshd_config.5.out ssh_config.5.out
MANPAGES_IN = moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 ssh-pkcs11-helper.8 sshd_config.5 ssh_config.5
MANTYPE = doc
CONFIGFILES=sshd_config.out ssh_config.out moduli.out
CONFIGFILES_IN=sshd_config ssh_config moduli
PATHSUBS = \
-e 's|/etc/ssh/ssh_prng_cmds|$(sysconfdir)/ssh_prng_cmds|g' \
-e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \
-e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \
-e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \
-e 's|/usr/libexec|$(libexecdir)|g' \
-e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \
-e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \
-e 's|/etc/ssh/ssh_host_ecdsa_key|$(sysconfdir)/ssh_host_ecdsa_key|g' \
-e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \
-e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \
-e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \
-e 's|/etc/moduli|$(sysconfdir)/moduli|g' \
-e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \
-e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \
-e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \
-e 's|/var/empty|$(PRIVSEP_PATH)|g' \
-e 's|/usr/bin:/bin:/usr/sbin:/sbin|/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin|g'
FIXPATHSCMD = $(SED) $(PATHSUBS)
all: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS)
$(LIBSSH_OBJS): Makefile.in config.h
$(SSHOBJS): Makefile.in config.h
$(SSHDOBJS): Makefile.in config.h
.c.o:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): always
(cd openbsd-compat && $(MAKE))
always:
libssh.a: $(LIBSSH_OBJS)
$(AR) rv $@ $(LIBSSH_OBJS)
$(RANLIB) $@
ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHLIBS) $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS)
$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o
$(LD) -o $@ scp.o progressmeter.o bufaux.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o ssh-pkcs11-client.o
$(LD) -o $@ ssh-agent.o ssh-pkcs11-client.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o roaming_dummy.o readconf.o
$(LD) -o $@ ssh-keysign.o readconf.o roaming_dummy.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-pkcs11-helper$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-pkcs11-helper.o ssh-pkcs11.o
$(LD) -o $@ ssh-pkcs11-helper.o ssh-pkcs11.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o roaming_dummy.o
$(LD) -o $@ ssh-keyscan.o roaming_dummy.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-synolib.o sftp-server.o sftp-server-main.o
$(LD) -o $@ sftp-server.o sftp-common.o sftp-synolib.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o
$(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o
$(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@if test "$(STRIP_SYM)" = "yes"; then \
$(STRIP) $@; \
fi
# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)
$(MANPAGES): $(MANPAGES_IN)
if test "$(MANTYPE)" = "cat"; then \
manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \
else \
manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \
fi; \
if test "$(MANTYPE)" = "man"; then \
$(FIXPATHSCMD) $${manpage} | $(AWK) -f $(srcdir)/mdoc2man.awk > $@; \
else \
$(FIXPATHSCMD) $${manpage} > $@; \
fi
$(CONFIGFILES): $(CONFIGFILES_IN)
conffile=`echo $@ | sed 's/.out$$//'`; \
$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@
ssh_prng_cmds.out: ssh_prng_cmds
if test ! -z "$(INSTALL_SSH_PRNG_CMDS)"; then \
$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
fi
# fake rule to stop make trying to compile moduli.o into a binary "moduli.o"
moduli:
echo
clean: regressclean
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core survey
(cd openbsd-compat && $(MAKE) clean)
distclean: regressclean
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core opensshd.init openssh.xml
rm -f Makefile buildpkg.sh config.h config.status ssh_prng_cmds
rm -f survey.sh openbsd-compat/regress/Makefile *~
rm -rf autom4te.cache
(cd openbsd-compat && $(MAKE) distclean)
if test -d pkg ; then \
rm -fr pkg ; \
fi
veryclean: distclean
rm -f configure config.h.in *.0
mrproper: veryclean
realclean: veryclean
catman-do:
@for f in $(MANPAGES_IN) ; do \
base=`echo $$f | sed 's/\..*$$//'` ; \
echo "$$f -> $$base.0" ; \
$(MANFMT) $$f | cat -v | sed -e 's/.\^H//g' \
>$$base.0 ; \
done
distprep: catman-do
$(AUTORECONF)
-rm -rf autom4te.cache
install: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config
install-nokeys: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf
install-nosysconf: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files
check-config:
-$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config
install-files:
$(srcdir)/mkinstalldirs $(DESTDIR)$(bindir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)5
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8
$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
(umask 022 ; $(srcdir)/mkinstalldirs $(DESTDIR)$(PRIVSEP_PATH))
$(INSTALL) -m 0755 $(STRIP_OPT) ssh$(EXEEXT) $(DESTDIR)$(bindir)/ssh$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) scp$(EXEEXT) $(DESTDIR)$(bindir)/scp$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-add$(EXEEXT) $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent$(EXEEXT) $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sshd$(EXEEXT) $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-rand-helper$(EXEEXT) $(DESTDIR)$(libexecdir)/ssh-rand-helper$(EXEEXT) ; \
fi
$(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign$(EXEEXT) $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) ssh-pkcs11-helper$(EXEEXT) $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sftp$(EXEEXT) $(DESTDIR)$(bindir)/sftp$(EXEEXT)
$(INSTALL) -m 0755 $(STRIP_OPT) sftp-server$(EXEEXT) $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
$(INSTALL) -m 644 moduli.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5
$(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
$(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
if [ ! -z "$(INSTALL_SSH_RAND_HELPER)" ]; then \
$(INSTALL) -m 644 ssh-rand-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8 ; \
fi
$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
$(INSTALL) -m 644 ssh-keysign.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
$(INSTALL) -m 644 ssh-pkcs11-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8
-rm -f $(DESTDIR)$(bindir)/slogin
ln -s ./ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
ln -s ./ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
install-sysconf:
if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
fi
@if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
fi
@if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
fi
@if [ -f ssh_prng_cmds ] && [ ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
else \
echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
fi ; \
fi
@if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
else \
$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
fi ; \
else \
echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
fi
host-key: ssh-keygen$(EXEEXT)
@if [ -z "$(DESTDIR)" ] ; then \
if [ -f "$(sysconfdir)/ssh_host_key" ] ; then \
echo "$(sysconfdir)/ssh_host_key already exists, skipping." ; \
else \
./ssh-keygen -t rsa1 -f $(sysconfdir)/ssh_host_key -N "" ; \
fi ; \
if [ -f $(sysconfdir)/ssh_host_dsa_key ] ; then \
echo "$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
else \
./ssh-keygen -t dsa -f $(sysconfdir)/ssh_host_dsa_key -N "" ; \
fi ; \
if [ -f $(sysconfdir)/ssh_host_rsa_key ] ; then \
echo "$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
else \
./ssh-keygen -t rsa -f $(sysconfdir)/ssh_host_rsa_key -N "" ; \
fi ; \
if [ -z "" ] ; then \
if [ -f $(sysconfdir)/ssh_host_ecdsa_key ] ; then \
echo "$(sysconfdir)/ssh_host_ecdsa_key already exists, skipping." ; \
else \
./ssh-keygen -t ecdsa -f $(sysconfdir)/ssh_host_ecdsa_key -N "" ; \
fi ; \
fi ; \
fi ;
host-key-force: ssh-keygen$(EXEEXT)
./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
test -z "" && ./ssh-keygen -t ecdsa -f $(DESTDIR)$(sysconfdir)/ssh_host_ecdsa_key -N ""
uninstallall: uninstall
-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
-rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
-rmdir $(DESTDIR)$(sysconfdir)
-rmdir $(DESTDIR)$(bindir)
-rmdir $(DESTDIR)$(sbindir)
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
-rmdir $(DESTDIR)$(mandir)
-rmdir $(DESTDIR)$(libexecdir)
uninstall:
-rm -f $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
-rm -f $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
-rm -f $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
-rm -f $(DESTDIR)$(RAND_HELPER)$(EXEEXT)
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
tests interop-tests: $(TARGETS)
BUILDDIR=`pwd`; \
[ -d `pwd`/regress ] || mkdir -p `pwd`/regress; \
[ -f `pwd`/regress/Makefile ] || \
ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile ; \
TEST_SHELL="sh"; \
TEST_SSH_SSH="$${BUILDDIR}/ssh"; \
TEST_SSH_SSHD="$${BUILDDIR}/sshd"; \
TEST_SSH_SSHAGENT="$${BUILDDIR}/ssh-agent"; \
TEST_SSH_SSHADD="$${BUILDDIR}/ssh-add"; \
TEST_SSH_SSHKEYGEN="$${BUILDDIR}/ssh-keygen"; \
TEST_SSH_SSHPKCS11HELPER="$${BUILDDIR}/ssh-pkcs11-helper"; \
TEST_SSH_SSHKEYSCAN="$${BUILDDIR}/ssh-keyscan"; \
TEST_SSH_SFTP="$${BUILDDIR}/sftp"; \
TEST_SSH_SFTPSERVER="$${BUILDDIR}/sftp-server"; \
TEST_SSH_PLINK="plink"; \
TEST_SSH_PUTTYGEN="puttygen"; \
TEST_SSH_CONCH="conch"; \
TEST_SSH_IPV6="yes" ; \
TEST_SSH_ECC="yes" ; \
TEST_SSH_SHA256="yes" ; \
cd $(srcdir)/regress || exit $$?; \
$(MAKE) \
.OBJDIR="$${BUILDDIR}/regress" \
.CURDIR="`pwd`" \
BUILDDIR="$${BUILDDIR}" \
OBJ="$${BUILDDIR}/regress/" \
PATH="$${BUILDDIR}:$${PATH}" \
TEST_SHELL="$${TEST_SHELL}" \
TEST_SSH_SSH="$${TEST_SSH_SSH}" \
TEST_SSH_SSHD="$${TEST_SSH_SSHD}" \
TEST_SSH_SSHAGENT="$${TEST_SSH_SSHAGENT}" \
TEST_SSH_SSHADD="$${TEST_SSH_SSHADD}" \
TEST_SSH_SSHKEYGEN="$${TEST_SSH_SSHKEYGEN}" \
TEST_SSH_SSHPKCS11HELPER="$${TEST_SSH_SSHPKCS11HELPER}" \
TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \
TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \
TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \
TEST_SSH_PLINK="$${TEST_SSH_PLINK}" \
TEST_SSH_PUTTYGEN="$${TEST_SSH_PUTTYGEN}" \
TEST_SSH_CONCH="$${TEST_SSH_CONCH}" \
TEST_SSH_IPV6="$${TEST_SSH_IPV6}" \
TEST_SSH_ECC="$${TEST_SSH_ECC}" \
TEST_SSH_SHA256="$${TEST_SSH_SHA256}" \
EXEEXT="$(EXEEXT)" \
$@ && echo all tests passed
compat-tests: $(LIBCOMPAT)
(cd openbsd-compat/regress && $(MAKE))
regressclean:
if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \
(cd regress && $(MAKE) clean) \
fi
survey: survey.sh ssh
@$(SHELL) ./survey.sh > survey
@echo 'The survey results have been placed in the file "survey" in the'
@echo 'current directory. Please review the file then send with'
@echo '"make send-survey".'
send-survey: survey
mail portable-survey@mindrot.org <survey
package: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS)
if [ "no" = yes ]; then \
sh buildpkg.sh; \
fi
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment