Skip to content

Instantly share code, notes, and snippets.

@guyc

guyc/2.6.28.diff

Created February 16, 2012 06:41
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save guyc/1842712 to your computer and use it in GitHub Desktop.
Save guyc/1842712 to your computer and use it in GitHub Desktop.
Download ZIP
Shows the differences in the boot log between the stock Chumby disk image and the 2.6.28 OpenEmbedded build from https://github.com/clearwater/chumby-linux
Raw
2.6.28.diff
--- bootlog.stock.tmp 2012-02-17 15:02:18.000000000 +1000
+++ bootlog.2.6.28.tmp 2012-02-17 15:02:18.000000000 +1000
@@ -5,37 +5,37 @@
Skipping 3968 chunks
Jumping to address 0x40808000:
0x00000000 0f 00 a0 e1 08 00 40 e2 02 0a 40 e2 08 10 9f e5 |......@...@.....|
-0x00000010 00 00 81 e5 02 00 00 eb 25 05 00 eb 20 20 00 00 |........%... ..|
+0x00000010 00 00 81 e5 02 00 00 eb d8 04 00 eb 20 80 80 40 |............ ..@|
0x00000020 11 b1 11 c1 14 00 9f e5 14 10 9f e5 00 20 a0 e3 |............. ..|
0x00000030 04 20 80 e4 01 00 50 e1 fc ff ff 3a 0e f0 a0 e1 |. ....P....:....|
-0x00000040 a0 13 02 00 20 15 02 00 0e f0 a0 e1 0e f0 a0 e1 |.... ...........|
+0x00000040 c0 6d 82 40 20 6e 82 40 0e f0 a0 e1 0e f0 a0 e1 |.m.@ n.@........|
0x00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0x00000060 04 b0 2d e5 00 b0 8d e2 14 d0 4d e2 64 30 9f e5 |..-.......M.d0..|
-0x00000070 00 30 93 e5 10 30 0b e5 58 20 9f e5 00 30 a0 e3 |.0...0..X ...0..|
-0x00000080 00 30 82 e5 50 30 9f e5 08 30 0b e5 4c 20 9f e5 |.0..P0...0..L ..|
-0x00000090 08 30 1b e5 3f 30 03 e2 00 30 82 e5 40 20 9f e5 |.0..?0...0..@ ..|
-0x000000a0 08 30 1b e5 23 33 a0 e1 00 30 82 e5 70 30 a0 e3 |.0..#3...0..p0..|
-0x000000b0 0c 30 0b e5 2c 20 9f e5 0c 30 1b e5 00 30 82 e5 |.0.., ...0...0..|
-0x000000c0 10 20 9f e5 10 30 1b e5 00 30 82 e5 00 d0 8b e2 |. ...0...0......|
+0x00000070 00 30 93 e5 08 30 0b e5 58 30 9f e5 00 20 a0 e3 |.0...0..X0... ..|
+0x00000080 00 20 83 e5 50 30 9f e5 0c 30 0b e5 4c 30 9f e5 |. ..P0...0..L0..|
+0x00000090 0c 20 1b e5 3f 20 02 e2 00 20 83 e5 40 30 9f e5 |. ..? ... ..@0..|
+0x000000a0 0c 20 1b e5 22 23 a0 e1 00 20 83 e5 70 30 a0 e3 |. .."#... ..p0..|
+0x000000b0 10 30 0b e5 2c 30 9f e5 10 20 1b e5 00 20 83 e5 |.0..,0... ... ..|
+0x000000c0 10 30 9f e5 08 20 1b e5 00 20 83 e5 00 d0 8b e2 |.0... ... ......|
0x000000d0 00 08 bd e8 1e ff 2f e1 30 00 07 80 41 03 00 00 |....../.0...A...|
0x000000e0 28 00 07 80 24 00 07 80 2c 00 07 80 00 48 2d e9 |(...$...,....H-.|
-0x000000f0 04 b0 8d e2 08 d0 4d e2 90 20 9f e5 05 36 a0 e3 |......M.. ...6..|
-0x00000100 00 30 82 e5 88 20 9f e5 0a 36 a0 e3 00 30 82 e5 |.0... ...6...0..|
-0x00000110 80 20 9f e5 00 30 a0 e3 00 30 82 e5 78 20 9f e5 |. ...0...0..x ..|
-0x00000120 00 30 a0 e3 00 30 82 e5 cc ff ff eb 6c 30 9f e5 |.0...0......l0..|
+0x000000f0 04 b0 8d e2 08 d0 4d e2 90 30 9f e5 05 26 a0 e3 |......M..0...&..|
+0x00000100 00 20 83 e5 88 30 9f e5 0a 26 a0 e3 00 20 83 e5 |. ...0...&... ..|
+0x00000110 80 30 9f e5 00 20 a0 e3 00 20 83 e5 78 30 9f e5 |.0... ... ..x0..|
+0x00000120 00 20 a0 e3 00 20 83 e5 cc ff ff eb 6c 30 9f e5 |. ... ......l0..|
0x00000130 00 30 93 e5 08 30 0b e5 08 30 1b e5 10 30 c3 e3 |.0...0...0...0..|
-0x00000140 08 30 0b e5 54 20 9f e5 08 30 1b e5 00 30 82 e5 |.0..T ...0...0..|
-0x00000150 4c 30 9f e5 08 30 0b e5 38 20 9f e5 08 30 1b e5 |L0...0..8 ...0..|
-0x00000160 00 30 82 e5 34 30 9f e5 00 30 93 e5 08 30 0b e5 |.0..40...0...0..|
-0x00000170 08 30 1b e5 10 30 c3 e3 08 30 0b e5 1c 20 9f e5 |.0...0...0... ..|
-0x00000180 08 30 1b e5 00 30 82 e5 04 d0 4b e2 00 88 bd e8 |.0...0....K.....|
+0x00000140 08 30 0b e5 54 30 9f e5 08 20 1b e5 00 20 83 e5 |.0..T0... ... ..|
+0x00000150 4c 30 9f e5 08 30 0b e5 38 30 9f e5 08 20 1b e5 |L0...0..80... ..|
+0x00000160 00 20 83 e5 34 30 9f e5 00 30 93 e5 08 30 0b e5 |. ..40...0...0..|
+0x00000170 08 30 1b e5 10 30 c3 e3 08 30 0b e5 1c 30 9f e5 |.0...0...0...0..|
+0x00000180 08 20 1b e5 00 20 83 e5 04 d0 4b e2 00 88 bd e8 |. ... ....K.....|
0x00000190 38 81 01 80 34 81 01 80 30 00 07 80 38 00 07 80 |8...4...0...8...|
0x000001a0 2c 00 07 80 01 03 00 00 04 b0 2d e5 00 b0 8d e2 |,.........-.....|
-0x000001b0 18 30 9f e5 00 30 93 e5 80 30 03 e2 00 00 53 e3 |.0...0...0....S.|
-0x000001c0 fa ff ff 0a 00 d0 8b e2 00 08 bd e8 1e ff 2f e1 |............../.|
-0x000001d0 18 00 07 80 30 48 2d e9 0c b0 8d e2 f4 40 9f e5 |....0H-......@..|
-0x000001e0 04 40 8f e0 f0 30 9f e5 03 30 84 e0 03 00 a0 e1 |.@...0...0......|
-0x000001f0 5e 00 00 eb e4 30 9f e5 00 30 93 e5 03 00 a0 e1 |^....0...0......|
+0x000001b0 00 00 a0 e1 18 30 9f e5 00 30 93 e5 80 30 03 e2 |.....0...0...0..|
+0x000001c0 00 00 53 e3 fa ff ff 0a 00 d0 8b e2 00 08 bd e8 |..S.............|
+0x000001d0 1e ff 2f e1 18 00 07 80 00 48 2d e9 04 b0 8d e2 |../......H-.....|
+0x000001e0 ec 30 9f e5 03 30 8f e0 03 00 a0 e1 5e 00 00 eb |.0...0......^...|
+0x000001f0 e0 30 9f e5 00 30 93 e5 03 00 a0 e1 bd 00 00 eb |.0...0..........|
Go!
Hardware version: 0x00000009
@@ -44,10 +44,12 @@
Setting up LCD to point at 0x44844000
Reading 0x00000800 bytes from offset 0x0000b800 to destination 0x45a00000
Skipping 2944 chunks
+Read 0 chunks. Trying again...
Comparing block [boot] with img1...
Comparing block [img1] with img1... Found!
Reading 0x00025800 bytes from offset 0x00044000 to destination 0x44844000
Skipping 17408 chunks
+Read 0 chunks. Trying again...
boot> shell
@@ -57,17 +59,11 @@
Booting in 2 seconds...
Press any key to enter shell... 0
-boot> regutil -w HW_RTC_WATCHDOG 0x00004e20
-Setting 0x8005c050: 0xffffffff -> 0x00004e20 ok
-
-boot> regutil -w HW_RTC_CTRL_SET 0x00000010
-Setting 0x8005c004: 0x00000008 -> 0x00000018 ok
-
-boot> regutil -w HW_EMI_CTRL 0x1c444040
-Setting 0x80020000: 0x1c884040 -> 0x1c444040 ok
+boot> regutil -w HW_EMI_CTRL 0x1c574040
+Setting 0x80020000: 0x1c884040 -> 0x1c574040 ok
boot> regutil -w HW_POWER_BATTMONITOR 0x01ec0414
-Setting 0x800440e0: 0x01d10614 -> 0x01ec0414 ok
+Setting 0x800440e0: 0x01ce0600 -> 0x01ec0414 ok
boot> regutil -w HW_POWER_5VCTRL_CLR 0x00000080
Setting 0x80044018: 0x0403f193 -> 0x0403f113 ok
@@ -99,6 +95,7 @@
Comparing block [img2] with img2... Found!
Reading 0x00025800 bytes from offset 0x00069800 to destination 0x44844000
Skipping 27008 chunks
+Read 0 chunks. Trying again...
boot> load krnA 0x40008000
Comparing block [boot] with krnA...
@@ -110,17 +107,18 @@
Comparing block [krnA] with krnA... Found!
Reading 0x00400000 bytes from offset 0x000ff800 to destination 0x40008000
Skipping 65408 chunks
+Read 0 chunks. Trying again...
-boot> linux 0x40008000 "console=ttyAM0,115200 init=/linuxrc root=/dev/mmcblk0p2 rootfstype=ext3 ro rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled logo.brand=BBBBBBBBBBBB"
-Going to run linux at offset 0x40008000 with cmdline console=ttyAM0,115200 init=/linuxrc root=/dev/mmcblk0p2 rootfstype=ext3 ro rootwait chumbyrev=09 ssp1=mmc sysrq_always_enabled logo.brand=chumby
-Uncompressing Linux.............................................................................................................................................. done, booting the kernel.
-[ ] Linux version 2.6.28-chumby (builder@stormbuild) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #302 PREEMPT Wed Jul 28 14:40:46 PDT 2010
+boot> linux 0x40008000 "console=ttyAM0,115200 root=/dev/mmcblk0p2 rw rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled logo.brand=BBBBBBBBBBBB"
+Going to run linux at offset 0x40008000 with cmdline console=ttyAM0,115200 root=/dev/mmcblk0p2 rw rootwait chumbyrev=09 ssp1=mmc sysrq_always_enabled logo.brand=chumby
+Uncompressing Linux................................................................................................................................................. done, booting the kernel.
+[ ] Linux version 2.6.28-chumby (guy@vdebian) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #4 PREEMPT Thu Feb 16 22:31:05 EST 2012
[ ] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ ] CPU: VIVT data cache, VIVT instruction cache
[ ] Machine: STMP378X
[ ] Memory policy: ECC disabled, Data cache writeback
[ ] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
-[ ] Kernel command line: console=ttyAM0,115200 init=/linuxrc root=/dev/mmcblk0p2 rootfstype=ext3 ro rootwait chumbyrev=09 ssp1=mmc sysrq_always_enabled logo.brand=chumby
+[ ] Kernel command line: console=ttyAM0,115200 root=/dev/mmcblk0p2 rw rootwait chumbyrev=09 ssp1=mmc sysrq_always_enabled logo.brand=chumby
[ ] Detected chumby version 9 (from str 09)
[ ] debug: sysrq always enabled.
[ ] Unknown boot option `logo.brand=chumby': ignoring
@@ -130,7 +128,7 @@
[ ] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ ] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ ] Memory: 64MB = 64MB total
-[ ] Memory: 59932KB available (4116K code, 699K data, 120K init)
+[ ] Memory: 59820KB available (4220K code, 704K data, 116K init)
[ ] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ ] Calibrating delay loop... 226.91 BogoMIPS (lpj=1134592)
[ ] Security Framework initialized
@@ -160,7 +158,7 @@
[ ] regulator: charger-1: 0 <--> 2147483 mA fast normal
[ ] regulator: power-test-1: 0 <--> 2147483 mA fast normal
[ ] regulator: cpufreq-1: 0 <--> 2147483 mA fast normal
-[ ] stmp378x_devb.c - stmp378x_devb_init():388 - Adding 15 platform-specific devices
+[ ] stmp378x_devb.c - stmp378x_devb_init():353 - Adding 13 platform-specific devices
[ ] Initialized chumby GPIO IRQ router
[ ] chumbyfbfw.c - chumbyfwfb_probe():1255 - resolution 720x480, bpp 2
[ ] chumbyfbfw.c - get_max_memsize():1060 - get_max_memsize: mem_size now 1382400 (720 x 480 x 16)
@@ -173,10 +171,14 @@
[ ] chumbyfbfw.c - chumbyfwfb_probe():1326 - memory to allocate for plane 1: 1658880
[ ] chumbyfbfw.c - chumbyfwfb_probe():1336 - allocated at ff92a000:0x43e00000
[ ] chumbyfbfw.c - chumbyfwfb_probe():1326 - memory to allocate for plane 2: 307200
-[ ] chumbyfbfw.c - chumbyfwfb_probe():1336 - allocated at ffabf000:0x43900000
+[ ] chumbyfbfw.c - chumbyfwfb_probe():1336 - allocated at ffabf000:0x43880000
[ ] Going to copy splash image from 44844000 (153600 bytes) to ff600000 (not 43a00000)
[ ] chumbyfbfw.c - pxp_setup():1124 - Pointing S0 at 43c00000
+[ ] chumbyfbfw.c - lcd_irq_handler():204 - lcd_irq_handler: underflow irq
[ ] stmp37xx-dbguart.0: ttyAM0 at MMIO 0xf0070000 (irq = 0) is a Debug UART
+[ ] usbcore: registered new interface driver usbfs
+[ ] usbcore: registered new interface driver hub
+[ ] usbcore: registered new device driver usb
[ ] NET: Registered protocol family 2
[ ] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ ] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
@@ -184,22 +186,37 @@
[ ] TCP: Hash tables configured (established 2048 bind 2048)
[ ] TCP reno registered
[ ] NET: Registered protocol family 1
+[ ] usb: DR gadget (utmi) registered
[ ] ashmem: initialized
[ ] Registering unionfs 2.5.2 (for 2.6.28.10)
[ ] NTFS driver 2.1.29 [Flags: R/O].
[ ] fuse init (API version 7.10)
-[ ] msgmni has been set to 117
+[ ] msgmni has been set to 116
[ ] alg: No test for stdrng (krng)
[ ] cryptodev: driver loaded.
+[ ] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ ] io scheduler noop registered (default)
[ ] logger: created 64K log 'log_main'
[ ] logger: created 256K log 'log_events'
[ ] logger: created 64K log 'log_radio'
+[ ] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ ] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
+[ ] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
+[ ] fsl-ehci fsl-ehci.0: irq 11, io mem 0x80080000
+[ ] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
+[ ] usb usb1: configuration #1 chosen from 1 choice
+[ ] hub 1-0:1.0: USB hub found
+[ ] hub 1-0:1.0: 1 port detected
+[ ] Chumby bend sensor driver version 2.3-Falconwing initializing (scross@chumby.com)...
+[ ] input: bend-sensor as /devices/platform/bend-sensor/input/input0
+[ ] input: STMP3XXX touchscreen as /devices/virtual/input/input1
+[ ] input: stmp3xxx-rotdec as /devices/virtual/input/input2
[ ] STMP3xxx RTC driver v1.0 hardware v2.0.0
[ ] stmp3xxx-rtc stmp3xxx-rtc: rtc core: registered stmp3xxx-rtc as rtc0
+[ ] i2c /dev entries driver
[ ] ddi_bc_Init: success
[ ] stmp3xxx-battery stmp3xxx-battery.0: bc_sm_restart: no battery present
-[ ] power/linux.c - bc_sm_restart():982 - Returning from sm_restart()
+[ ] power/linux.c - bc_sm_restart():987 - Returning from sm_restart()
[ ] stmp3xxx-dcp stmp3xxx-dcp: DCP crypto enabled.!
[ ] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ ] ASoC version 0.13.2
@@ -216,114 +233,59 @@
[ ] arp_tables: (C) 2002 David S. Miller
[ ] TCP cubic registered
[ ] NET: Registered protocol family 17
-[ ] mmc0: new SD card at address 0002
[ ] RPC: Registered udp transport module.
[ ] RPC: Registered tcp transport module.
-[ ] mmcblk0: mmc0:0002 00000 971 MiB
-[ ] mmcblk0: p1 p2 p3 p4 < p5 p6 >
-[ ] stmp3xxx-rtc stmp3xxx-rtc: setting system clock to 1970-01-01 00:02:20 UTC (140)
-[ ] EXT3-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
-[ ] EXT3-fs: mounted filesystem with ordered data mode.
-[ ] VFS: Mounted root (ext3 filesystem) readonly.
-[ ] Freeing init memory: 120K
-[ ] kjournald starting. Commit interval 5 seconds
-/linuxrc v0.42 $Rev: 23680 $ pid=1
-Parsing /etc/init.d/linuxrc.config
-Executing scripted actions (including 11 setenv statements)
-[MOUNT] tmpfs (type tmpfs) on /tmp (mode=755)
-[MOUNT] proc (type proc) on /proc
-[MOUNT] sysfs (type sysfs) on /sys
-Scripted execution complete, 3 actions with 0 failures
-environ[0]: HOME=/
-environ[1]: TERM=linux
-environ[2]: ssp1=mmc
-Adding /psp/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/chumby/scripts
-[SETENV] PATH=/usr/bin:/bin:/usr/sbin:/usr/local/sbin:/sbin:/usr/chumby/scripts
-[SETENV] CNPLATFORM=falconwing
-[SETENV] CONFIGNAME=falconwing
-[SETENV] VIDEO_RES=320x240
-[SETENV] VIDEO_X_RES=320
-[SETENV] VIDEO_Y_RES=240
-[SETENV] HAS_CP=1
-[SETENV] LANGUAGE=en_US
-[SETENV] GST_PLUGIN_PATH=/lib/gstreamer-0.10/
-[SETENV] CAMLIBS=/lib/libgphoto2-2.4.3
-[SETENV] IOLIBS=/lib/libgphoto2_port-0.8.0
-Starting /sbin/init (cwd=/) (envcount=15)
-init started: BusyBox v1.16.0 (2010-07-28 15:14:10 PDT)
-imgtool 1.22 (built for falconwing)
-Drawing image /bitmap/320x240/chumby_logo.bin.jpg
-Opening output /dev/fb0 fmt=0
-fb handle = 4
-Displaying rows from 0 to 239 inclusive
-Closing frame buffer
-Welcome to Falconwing
-
-can't open /dev/tty0: No such file or directory
-/etc/init.d/rcS.background: line 18: can't create /psp/branding: Read-only file system
-Setting 0x8005c078: 0x80000000 -> 0x80000000 ok
-e2fsck 1.41.5 (23-Apr-2009)
-/dev/mmcblk0p5: clean, 48/256 files, 10533/124997 blocks
-[ ] kjournald starting. Commit interval 5 seconds
-[ ] EXT3 FS on mmcblk0p5, internal journal
-[ ] EXT3-fs: mounted filesystem with journal data mode.
-e2fsck 1.41.5 (23-Apr-2009)
-/dev/mmcblk0p6: clean, 12/37520 files, 6577/150022 blocks
-[ ] kjournald starting. Commit interval 5 seconds
-[ ] EXT3 FS on mmcblk0p6, internal journal
-[ ] EXT3-fs: mounted filesystem with ordered data mode.
-can't open /dev/tty0: No such file or directory
-can't open /dev/tty0: No such file or directory
-[ ] Chumby bend sensor driver version 2.3-Falconwing initializing (scross@chumby.com)...
-[ ] input: bend-sensor as /devices/platform/bend-sensor/input/input0
-can't open /dev/tty0: No such file or directory
-can't open /dev/tty0: No such file or directory
-can't open /dev/tty0: No such file or directory
-[ ] input: STMP3XXX touchscreen as /devices/virtual/input/input1
-can't open /dev/tty0: No such file or directory
-[ ] mice: PS/2 mouse device common for all mice
-Setting 0x80018508: 0x24011000 -> 0x20011000 ok
-Setting 0x80018504: 0x20011000 -> 0x24011000 ok
-[ ] usbcore: registered new interface driver usbfs
-[ ] usbcore: registered new interface driver hub
-[ ] usbcore: registered new device driver usb
-[ ] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-[ ] fsl-ehci fsl-ehci: Freescale On-Chip EHCI Host Controller
-[ ] fsl-ehci fsl-ehci: new USB bus registered, assigned bus number 1
-[ ] fsl-ehci fsl-ehci: irq 11, io mem 0xf0080000
-[ ] fsl-ehci fsl-ehci: USB 2.0 started, EHCI 1.00
-[ ] usb usb1: configuration #1 chosen from 1 choice
-[ ] hub 1-0:1.0: USB hub found
-[ ] hub 1-0:1.0: 1 port detected
+[ ] stmp3xxx-rtc stmp3xxx-rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
+[ ] Waiting for root device /dev/mmcblk0p2...
+[ ] mmc0: new SD card at address 0002
[ ] usb 1-1: new high speed USB device using fsl-ehci and address 2
+[ ] mmcblk0: mmc0:0002 00000 971 MiB
+[ ] mmcblk0: p1 p2
+[ ] NILFS: Can't find nilfs on dev mmcblk0p2.
[ ] usb 1-1: configuration #1 chosen from 1 choice
[ ] hub 1-1:1.0: USB hub found
[ ] hub 1-1:1.0: 4 ports detected
-Setting 0x80018200: 0x00000000 -> 0x00000000 ok
-Setting 0x80018210: 0x00000000 -> 0x00000000 ok
-Setting 0x80018220: 0x00000000 -> 0x00000000 ok
-Setting 0x80018230: 0x00000000 -> 0x00000000 ok
-Setting 0x80018240: 0x00000000 -> 0x00000000 ok
-Setting 0x80018250: 0x00000000 -> 0x00000000 ok
-Setting 0x80018260: 0x00000000 -> 0x00000000 ok
-Setting 0x80018270: 0x00000000 -> 0x00000000 ok
-Setting 0x80018280: 0x01111111 -> 0x00000000 ok
-Setting 0x80018290: 0x33333330 -> 0x11111110 ok
-Setting 0x800182a0: 0x33333333 -> 0x11111111 ok
-Setting 0x800182b0: 0x33300333 -> 0x11111111 ok
-Setting 0x800182c0: 0x33333333 -> 0x11111111 ok
-Setting 0x800182d0: 0x33333333 -> 0x11111111 ok
-Setting 0x800182e0: 0x00333333 -> 0x00111111 ok
-[ ] i2c /dev entries driver
-FATAL: Module snd_soc_stmp3780_devb not found.
-[ ] Chumby timerx[2] driver version 3.0-Falconwing initializing (bunnie@chumby.com)... show me your jiffies!!!
-[ ] input: stmp3xxx-rotdec as /devices/virtual/input/input2
+[ ] kjournald starting. Commit interval 5 seconds
+[ ] EXT3 FS on mmcblk0p2, internal journal
+[ ] EXT3-fs: recovery complete.
+[ ] EXT3-fs: mounted filesystem with ordered data mode.
+[ ] VFS: Mounted root (ext3 filesystem).
+[ ] Freeing init memory: 116K
+INIT: version 2.86 booting
+Please wait: booting...
+Starting udev
+[ ] udev[85]: starting version 165
+[ ] mice: PS/2 mouse device common for all mice
+Remounting root file system...
+Caching udev devnodes
+Populating dev cache
[ ] NET: Registered protocol family 10
-Starting chumbhowld service
-Started chumbhowld
-Adobe FlashLite 3.1.7 Release (Version 9,1,122,0)- Chumby Industries (version 9 build 112-3320 [GCC 4.3.2])
-Portions copyright (C) 2005-2010 Chumby Industries, Inc.
-Built for: falconwing; Features: Video ALSA ARM-optimizations
-Build time: Wed 28Jul2010 1454
-GetRegisteredInstancePid(/var/run/chumbyflashplayer.pid) returned 0 - no other instance is running
-rcS completed at Wed Dec 31 16:02:48 PST 1969
+ALSA: Restoring mixer settings...
+/usr/sbin/alsactl: set_control:1403: Cannot write control '2:0:0:DAC Playback Volume:0' : No such file or directory
+Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
+done.
+Starting portmap daemon: portmap.
+net.ipv4.conf.default.rp_filter = 1
+net.ipv4.conf.all.rp_filter = 1
+Sat Feb 18 00:16:00 UTC 2012
+INIT: Entering runlevel: 5
+Starting system message bus: dbus.
+Starting Dropbear SSH server: dropbear.
+Starting syslogd/klogd: done
+ * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
+ ...done.
+
+.---O---.
+| | .-. o o
+| | |-----.-----.-----.| | .----..-----.-----.
+| | | __ | ---'| '--.| .-'| | |
+| | | | | |--- || --'| | | ' | | | |
+'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
+ -' |
+ '---'
+
+The Angstrom Distribution chumby-falconwing ttyAM0
+
+Angstrom v20120216 chumby-falconwing ttyAM0
+
+chumby-falconwing login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment