Skip to content

Instantly share code, notes, and snippets.

@halmartin
Created March 9, 2023 17:46
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save halmartin/0af9de40d26a462fe311f185f92d78b1 to your computer and use it in GitHub Desktop.
Save halmartin/0af9de40d26a462fe311f185f92d78b1 to your computer and use it in GitHub Desktop.
Fujitsu TX1320 M3 iRMC bootlog
U-Boot 1.1.6 (Sep 22 2015 - 17:25:45)
DRAM: 247 MiB
Fast clk is set
Found SPI Chip Numonyx n25q512
Flash: 64 MiB
Net: pilot_eth0, pilot_eth1
Hit Esc key to stop autoboot: 1  0
Image to be booted is 1
Found INITRD Image for Root File System @ /dev/mtdblock1 flash address 90000
root @ /dev/mtdblock1 Address: 90000
Copying Module of size 0x1a0d040 From 0x90000 to 0x81800000
INITRD Image moved to 0x81800000
platform @ /dev/mtdblock2 Address: 1d50000
Un-Protect Flash Bank # 1
Booting from MODULE_PIMAGE ...
Bootargs = [root=/dev/ram0 ro ip=none ramdisk_blocksize=4096 console=ttyS0,38400 rootfstype=cramfs bigphysarea=4096 pram=0x87C00000,512k imagebooted=1 frontlanphy=2]
## Booting image at 01aa0040 ...
Image Name: Linux-3.14.17-ami
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2687312 Bytes = 2.6 MiB
Load Address: 80808000
Entry Point: 80808000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 81800000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 27316224 Bytes = 26.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.17-ami (AMI@localhost) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #1 Fri Sep 8 13:00:29 CEST 2017
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: ServerEngines Hornet Board
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] BUG: mapping for 0x00000000 at 0xff000000 out of vmalloc space
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62738
[ 0.000000] Kernel command line: root=/dev/ram0 ro ip=none ramdisk_blocksize=4096 console=ttyS0,38400 rootfstype=cramfs bigphysarea=4096 pram=0x87C00000,512k imagebooted=1 frontlanphy=2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 202456K/252928K available (3578K kernel code, 192K rwdata, 1116K rodata, 139K init, 121K bss, 50472K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xcf800000 - 0xff000000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf700000 ( 247 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc049dd14 (4696 kB)
[ 0.000000] .init : 0xc049e000 - 0xc04c0fc4 ( 140 kB)
[ 0.000000] .data : 0xc04c2000 - 0xc04f2380 ( 193 kB)
[ 0.000000] .bss : 0xc04f2380 - 0xc0510a70 ( 122 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96
[ 0.000000] Pilot-II Interrupt Controller Enabled
[ 0.000000] 0 17d7840 4 0 8 0 c 0
[ 0.000000] CLOCK_EVT_MODE_PERIODIC OUR_LATCH 3d090 CLOCK_TICK_RATE 25000000
[ 0.000000] 0 3d090 4 ffffffff 8 3 c 0
[ 0.000000] mult 3333333 shift 1f max_delta_ns 2800000259 min_delta_ns 27d9
[ 0.000000] Pilot-4 Timer configured
[ 0.000000] Registering clock source timercrnt addr f0411018
[ 0.000000] WARNING: Pilot-II Timer Not Started Yet
[ 0.000000] WARNING: Pilot-II Timer Not Started Yet
[ 0.000000] startBmcBootTimer:503
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
[ 0.270000] console [ttyS0] enabled
[ 0.280000] Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
[ 0.370000] pid_max: default: 32768 minimum: 301
[ 0.380000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.390000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.400000] CPU: Testing write buffer coherency: ok
[ 0.420000] Setting up static identity map for 0x80b856d8 - 0x80b85718
[ 0.430000] devtmpfs: initialized
[ 0.450000] NET: Registered protocol family 16
[ 0.470000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.550000] bio: create slab <bio-0> at 0
[ 0.570000] Switched to clocksource pilot3_timer2
[ 0.580000] CLOCK_EVT_MODE_ONESHOT OUR_LATCH 3d090 CLOCK_TICK_RATE 25000000
[ 0.580000] 0 3d090 4 0 8 0 c 0
[ 0.630000] NET: Registered protocol family 2
[ 0.650000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.670000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.690000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.710000] TCP: reno registered
[ 0.720000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.740000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.770000] NET: Registered protocol family 1
[ 0.780000] RPC: Registered named UNIX socket transport module.
[ 0.800000] RPC: Registered udp transport module.
[ 0.820000] RPC: Registered tcp transport module.
[ 0.830000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.860000] Trying to unpack rootfs image as initramfs...
[ 0.880000] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 1.340000] Freeing initrd memory: 26672K (c1001000 - c2a0d000)
[ 1.370000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.440000] bigphysarea: Allocated 4096 pages at 0xce502000.
[ 1.470000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.500000] NFS: Registering the id_resolver key type
[ 1.520000] Key type id_resolver registered
[ 1.530000] Key type id_legacy registered
[ 1.550000] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
[ 1.580000] msgmni has been set to 447
[ 1.600000] alg: No test for stdrng (krng)
[ 1.620000] io scheduler noop registered (default)
[ 1.640000] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.660000] serial8250: ttyS0 at I/O 0xf0430000 (irq = 19, base_baud = 115200) is a 16550A
[ 1.690000] serial8250: ttyS1 at I/O 0xf0431000 (irq = 20, base_baud = 115200) is a 16550A
[ 1.720000] serial8250: ttyS2 at I/O 0xf0432000 (irq = 21, base_baud = 115200) is a 16550A
[ 1.750000] serial8250: ttyS3 at I/O 0xf0415000 (irq = 40, base_baud = 115200) is a 16550A
[ 1.780000] serial8250: ttyS4 at I/O 0xf0416000 (irq = 41, base_baud = 115200) is a 16550A
[ 1.850000] brd: module loaded
[ 1.880000] loop: module loaded
[ 1.900000] Fast clk is set
[ 1.910000] Ractrends Flash mapping: 0x04000000 at 0x00000000
[ 1.930000] Flash total banks (4)
[ 1.940000] Probing for Flash at Bank # 0
[ 1.950000] Found SPI Chip Micron/Numonyx N25Q512A(0x20ba) FAST READ, NORMAL WRITE
[ 1.980000] Probing for Flash at Bank # 1
[ 1.990000] Ractrends: No spi compatible flash device found
[ 2.010000] *PartCount is 0
[ 2.020000] MTD Partition 0 : fullpart @ 0x0 of Size 0x4000000
[ 2.040000] MTD Partition 1 : root @ 0x90000 of Size 0x1a0d040
[ 2.120000] MTD Partition 2 : platform @ 0x1d50000 of Size 0x20000
[ 2.150000] MTD Partition 3 : root @ 0x1e90000 of Size 0x1a0d040
[ 2.240000] MTD Partition 4 : platform @ 0x3b50000 of Size 0x20000
[ 2.280000] Creating 5 MTD partitions on "Ractrends":
[ 2.290000] 0x000000000000-0x000004000000 : "fullpart"
[ 2.320000] 0x000000090000-0x000001a9d040 : "root"
[ 2.330000] mtd: partition "root" doesn't end on an erase block -- force read-only
[ 2.360000] 0x000001d50000-0x000001d70000 : "platform"
[ 2.390000] 0x000001e90000-0x00000389d040 : "root"
[ 2.400000] mtd: partition "root" doesn't end on an erase block -- force read-only
[ 2.430000] 0x000003b50000-0x000003b70000 : "platform"
[ 2.460000] MTD Partition 5 : conf @ 0x3c00000 of Size 0x3f0000
[ 2.480000] Creating 1 MTD partitions on "Ractrends":
[ 2.490000] 0x000003c00000-0x000003ff0000 : "conf"
[ 2.520000] MTD Partition 6 : fru @ 0x3ff0000 of Size 0x10000
[ 2.540000] Creating 1 MTD partitions on "Ractrends":
[ 2.550000] 0x000003ff0000-0x000004000000 : "fru"
[ 2.570000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 2.610000] Linux PilotIII Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 2.650000] tulip0: MII transceiver #2 config 1140 status 7949 advertising 05e1.
[ 2.670000] eth0: User Supplied Phy ID = 1
[ 2.690000] net eth0: Pilot3 Tulip rev 0 EEPROM not present, 4c:52:62:aa:bb:cc, IRQ 0
[ 2.720000] tulip1 : Unable to detect PHY at user specfied ID 2
[ 2.740000] net eth1: Pilot3 Tulip rev 0 EEPROM not present, 4c:52:62:aa:bb:cc, IRQ 1
[ 2.770000] i2c /dev entries driver
[ 2.790000] sdhci: Secure Digital Host Controller Interface driver
[ 2.810000] sdhci: Copyright(c) Pierre Ossman
[ 2.820000] PILOT SoC SD/MMC Driver
[ 2.830000] pilot_hw_init success
[ 2.890000] mmc0: SDHCI controller on pilot_sdhci [pilot_sdhci.0] using DMA
[ 2.910000] Netfilter messages via NETLINK v0.30.
[ 2.930000] nfnl_acct: registering with nfnetlink.
[ 2.950000] xt_time: kernel timezone is -0000
[ 2.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.980000] arp_tables: (C) 2002 David S. Miller
[ 3.000000] TCP: cubic registered
[ 3.010000] NET: Registered protocol family 10
[ 3.030000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.050000] sit: IPv6 over IPv4 tunneling driver
[ 3.070000] NET: Registered protocol family 17
[ 3.090000] Bridge firewalling registered
[ 3.100000] 8021q: 802.1Q VLAN Support v1.8
[ 3.120000] Key type dns_resolver registered
[ 3.140000] RAMDISK: cramfs filesystem found at block 0
[ 3.160000] RAMDISK: Loading 26676KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
[ 6.110000] VFS: Mounted root (cramfs filesystem) readonly on device 1:0.
[ 6.140000] devtmpfs: mounted
[ 6.160000] Freeing unused kernel memory: 136K (c049e000 - c04c0000)
INIT: version 2.88 booting
Sat Jan 1 00:00:00 GMT 2000
[ 8.610000] udevd[471]: starting version 175
fetching booted image no.....
root=/dev/ram0 ro ip=none ramdisk_blocksize=4096 console=ttyS0,38400 rootfstype=cramfs bigphysarea=4096 pram=0x87C00000,512k imagebooted=1 frontlanphy=2
imagebooted 1
mounting mtd devices of Image1...
image no is ...... 1
256+0 records in
256+0 records out
131072 bytes (128.0KB) copied, 0.426081 seconds, 300.4KB/s
mounting platform mtd device platform successful...
image-1 platform mounted hence exiting...
Mounting conf..
checking the mounted conf..
file exists and conf mounted correctly
FTS file exists and conf mounted correctly
[ 18.080000] I2C0: Hardware routines registered
[ 18.090000] Registered bus id: i2c-0
[ 18.120000] I2C1: Hardware routines registered
[ 18.130000] Registered bus id: i2c-1
[ 18.160000] I2C2: Hardware routines registered
[ 18.170000] Registered bus id: i2c-2
[ 18.200000] I2C3: Hardware routines registered
[ 18.220000] Registered bus id: i2c-3
[ 18.240000] I2C4: Hardware routines registered
[ 18.260000] Registered bus id: i2c-4
[ 18.280000] I2C5: Hardware routines registered
[ 18.290000] Registered bus id: i2c-5
[ 18.320000] I2C6: Hardware routines registered
[ 18.330000] Registered bus id: i2c-6
[ 18.360000] I2C7: Hardware routines registered
[ 18.370000] Registered bus id: i2c-7
[ 18.890000] Helper Module Driver Version 1.2
[ 18.900000] Copyright (c) 2009-2015 American Megatrends Inc.
kernel.panic = 5
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 2048
net.ipv4.tcp_synack_retries = 3
Starting Execution Daemon.
Starting FTS_BmcResetApp ...
FTS_BmcResetApp 1.0, (c) 2017 FUJITSU LIMITED.
[ 19.280000] The GPIO Driver is loaded successfully.
Starting Process Manager.
[ 19.350000] GPIO HW Driver, (c) 2009-2016 American Megatrends Inc.
Starting IPMI Stack: IPMIMain Creating new /var/tmp/libfeature ...
[682 : 682 INFO]Redfish support is not enabled
[ 22.860000] PILOT MISCCTRL Driver Version 102.0
[ 22.870000] Copyright (c) 2009-2016 American Megatrends Inc.
[ 22.900000] Load the iRMC Console Logging, device ttyS4
[ 22.920000] console log chardev registered with major 254, minor 0
[ 22.950000] logbuffer_init() pram is missing signature or wrong PERMDAT_VERSION, so initializing logbuffer
[ 22.990000] phyctrl: module license 'unspecified' taints kernel.
[ 23.010000] Disabling lock debugging due to kernel taint
[ 23.030000] PILOT-II PHYCTRL Driver Version 103.0
[ 23.050000] Copyright (c) 2011 American Megatrends Inc.
+++++ Coldstart ++++ Init permdata
+++Init PRAM successfully++
[ 23.700000] Reset Common Driver, (c) 2009-2015 American Megatrends Inc.
[ 23.730000] LPCreset HW Driver, (c) 2009-2015 American Megatrends Inc.
utInitLanInfoSDR (Version 0): SDR Type 0x29, LanPort0 0x0C, LanPort1 0x10, LanCfg 0x00, Sh1ChId 0x00, Sh2ChId 0x00
Phy REALTEK_RTL8211 LED initialization finished
Info: Primary FRU Inventory Device points to the MainBoard.
SNTCI_Restore: Available, Active, Enabled
[682 : 682 INFO]First call of SEL/iEL notify init detected, creating queues and watchers list
[682 : 682 INFO]SEL/IEL notify receivers list count : 0
[682 : 682 INFO]System Event Log (SEL) notify initialized
[682 : 682 INFO]First call of SEL/iEL notify init detected, creating queues and watchers list
[682 : 682 INFO]SEL/IEL notify receivers list count : 0
[682 : 682 INFO]Internal Event Log (IEL) notify initialized
salBMCIpNominalSpeed_write: Set LanSpeed to 0, Chnum = 0x2, CC = 0x0
-<-<-<-<-< START Power OnOff THREAD ->->->->->-
Sucesfully updated the file
[ 30.410000] KCS Common Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.450000] KCS HW Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.510000] Snoop Common Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.570000] Snoop HW Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.610000] ADC Driver Version 1.0
[ 30.620000] Copyright (c) 2009-2015 American Megatrends Inc.
[ 30.650000] PILOT-III adc hw module loaded
[ 30.670000] Watchdog Common Driver, (c) 2010 American Megatrends Inc.
[ 30.730000] PECI Common Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.760000] PECI HW Driver, (c) 2009-2015 American Megatrends Inc.
[ 30.800000] FUNCTION1_SHARED_MEM_START = 0x8ffe0000
[ 30.820000] FUNCTION1_SHARED_MEM_LEN = 0x00020000
[ 30.880000] Function1 HW driver loaded...
[ 30.900000] Network Interface Monitor Version 2.6.0
[ 30.920000] Copyright (c) 2009-2015 American Megatrends Inc.
[ 30.980000] NCSI Interface Driver Version 1.1
[ 30.990000] Copyright (c) 2009-2015 American Megatrends Inc.
[ 31.010000] NCSI(eth1): Detect NCSI Packages and Channels
[ 31.050000] Pilot-III: Waiting for MAC soft reset to be completed ...
[ 31.070000] Pilot-III: MAC soft reset completed
[ 31.130000] PWMTACH Common Driver, (c) 2009-2015 American Megatrends Inc.
[ 31.160000] PWMTACH HW Driver, (c) 2010 American Megatrends Inc.
net.ipv4.tcp_rmem = 4096 87380 1664416
net.ipv4.tcp_rmem = 4096 87380 1664416
[ 31.590000] Phyctrl: Phy Device is RTL 8211E(ch)
[ 31.660000] Phyctrl: Phy Device is Intel Zoar 82575(10h)
net.ipv4.tcp_rmem = 4096 87380 1664416
net.ipv4.tcp_rmem = 4096 87380 1664416
net.ipv4.tcp_rmem = 4096 87380 1664416
[682 : 682 INFO]calc checksum:fffffa8c vs actual checksum:fffffa8c
[ 32.630000] Manufacturer ID :: (0x57010000)
[682 : 682 INFO]MACFRUAddr is 4c:52:62:aa:bb:cc vs Uboot is 4c:52:62:aa:bb:cc
[682 : 682 INFO]MACFRUAddr is 4c:52:62:aa:bb:cc vs Uboot is 4c:52:62:aa:bb:cc
[ 33.170000] read_pin_val returned -1 !!
[682 : 760 CRITICAL][nodemngrhelper.c:61]Unable to find any files in /usr/local/lib/compmanager/
fts_util.c:6147 Flasher is not running (yet)!
pcieAss: PcieAssemblyThread() started ... debug w/ config-var 2540 (oemcmds=0x10)
pcieAss: handlePcieAssembly()
Initialize power control
Node Manager SlaveAddr: 0x2C
pwcpDeviceInit()
Node Manager domain 'High Power I/O system' not supported
Config Variable 'ConfPowerControlMode' changed to 0x01
fts_NM_SendPwrCtrlModeChg(): PwrCtrlMode: 1 (Best performance)
onNotifyHostPowerOff Begin: ACPIState = 0x0, Current Power State Byte = 0x20
fts_NM_NotifyHostStateChange(): Power Off
************* onNotifyHostPowerOff (PowerOffType = NORMAL_OFF)
.
Refreshing Pilot Hardware Watchdog.
Refreshing Watchdog Monitoring
License App startedadviserd doesn't have the valid license. So stopping the adviserd service
vmapp doesn't have the valid license. So stopping the vmapp service
rmedia doesn't have the valid license. So stopping the rmedia service
lmedia doesn't have the valid license. So stopping the lmedia service
Starting PAM Helper Daemon: PAMHelperD .
Starting StoreLib RAID controller interface: FTS_Appstorelib[ 38.070000] NCSI(eth1): Initializing the Timer for getting the link state(Pkg:0, Ch:0).
.
[ 39.260000] random: UDSIfcTask urandom read with 44 bits of entropy available
Starting Syslog Monitor Daemon: SyslogMonitorD.
INIT: Entering runlevel: 3
Starting enhanced syslogd: rsyslogd.
[ 41.680000] bonding: bond0 is being deleted...
[ 41.730000] bonding: bond0: released all slaves
Starting DHCP monitor.
net.ipv4.tcp_rmem = 4096 87380 1664416
net.ipv4.tcp_rmem = 4096 87380 1664416
ifconfig: SIOCGIFFLAGS: No such device
ifdown: interface lo not configured
ifdown: interface eth0 not configured
Interface lo is going to go up
Interface lo is up
IPv6 entry is not present in interfaces file
Secure Port is enabled for [ssh] with 22
Starting OpenBSD Secure Shell server: sshdInterface eth0 is going to go up
[ 45.290000] Pilot-III: Waiting for MAC soft reset to be completed ...
[ 45.310000] Pilot-III: MAC soft reset completed
[ 45.330000] eth0 : Link is Down
net.ipv4.tcp_rmem = 4096 87380 1664416
/etc/ssh/sshd_config line 15: Deprecated option KeyRegenerationInterval
/etc/ssh/sshd_config line 16: Deprecated option ServerKeyBits
/etc/ssh/sshd_config line 27: Deprecated option RSAAuthentication
/etc/ssh/sshd_config line 34: Deprecated option RhostsRSAAuthentication
calling dhcp6c....
.
Interface eth0 is up
[tftp] is enabled.
Link status eth0:Down.
Secure port is disabled for [tftp].
Interface eth0 is going to go up
Non-Secure Port is enabled for [tftp] with 69.
Starting TFTP Service in port number : 69: tftpd.
Starting SSL tunnels: stunnelInterface eth0 is up
[ 48.350000] eth0: Link is Down
DHCP monitor: Releasing eth0 interface for IPv6
Clients allowed=500
stunnel 4.53 on arm-unknown-linux-gnueabi platform
Compiled/running with OpenSSL 1.0.1e 11 Feb 2013
Threading:PTHREAD SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6
Reading configuration from file /etc/stunnel/stunnel.conf
Compression not enabled
PRNG seeded successfully
Initializing inetd mode configuration
/conf/certs/privkey.pem: No such file or directory (2)
str_stats: 11 block(s), 222 data byte(s), 462 control byte(s)
[Failed: /etc/stunnel/stunnel.conf]. Check if pid= is specified in the file
Starting FTS PCIe Function1 ...
Link status eth0:Down.
PCIe Function1: ShmemBaseBegin: 0x8FFE0000 ShmemBaseEnd: 0x90000000
Stopping VM Application: vmapp.
Stopping CD Redirection Server: cdserverfts_PCIe_initStatusSem(): Initial creation of semaphore
**** 14:41:55.920: INFO: No host connection was established before the BMC has restarted, check flags: 0x6!
.
Stopping FD Redirection Server: fdserver.
Stopping HD Redirection Server: hdserver.
Initializing CIM OEM DB ...
Starting CIMOEMDB Daemon ...
[682 : 750 INFO]*******************LAN Task Timeout happens***************
[682 : 750 INFO] eth0 : ipv4_enable 1, ipv6_enable 1, ipaddr 10.182.96.10, source 1, LANCFs VLANID: 0, LANCONFIG VLANID : 0
[682 : 750 INFO] eth1 : ipv4_enable 0, ipv6_enable 0, ipaddr 192.168.2.100, source 2, LANCFs VLANID: 0, LANCONFIG VLANID : 0
[682 : 750 INFO]Bond Enable : 0
[ 52.830000] NCSI(eth1): ERROR: SetLink AutoNegotiation (0.0) Failed
[ 56.850000] [sched_delayed] sched: RT throttling activated
[ 57.290000] NCSI(eth1): ERROR: GetLinkStatus(0.0) Failed
Cannot set new Ethtool settings
[682 : 750 CRITICAL][nwcfg.c:5592]Cannot set new Ethtool settings
.
OEM CIM Discovery failed
Initializing CIM Stack ...
CIM Service is disabled!!
Stopping Video Redirection Server: adviserd.
Stopping Local Media Server.
Stopping Remote Media Server.
Unmount SD card: skiping.
Starting RAID Cache daemon: FTS_RaidCache.
Starting SVAS update Daemon : FTS_SVAS_Update.
Starting : FTS_SNMP_Trapd.
Starting Firmware Upgrade Utility: flasher.
MegaRAC Firmware Upgrade Utility
Copyright (c) 2009-2015 American Megatrends Inc.
FlashStart = 0x0
FlashSize = 0x4000000
UsedFlashStart = 0x0
UsedFlashSize = 0x1E00000
EnvStart = 0x40000
EnvSize = 0x10000
Starting FTS OEM axedaagent ...
Starting FTS OEM RedfishTaskManager ...
Starting periodic command scheduler: cron.
Starting FTS OEM RedfishService ...
FTS RedfishService registered to processmanager
Starting FTS OEM WebServer ...
FTS_WebServer - Starting as daemon... pid=1283
FTS_WebServer registered to processmanager
Starting Timeout Daemon Utility: timeoutd.
Registering /usr/local/bin/timeoutd process to Process Manager at Port Number 0 and SLP argument is
Starting Boot Complete.
Setting the network link mode as specified in the configuration file - /conf/phycfg.conf ...
Cannot set new Ethtool settings
[1340 : 1340 CRITICAL][nwcfg.c:5592]Cannot set new Ethtool settings
[PHYCFG] Error setting network link modes for interface: eth0...
[ 92.000000] NCSI(eth1): ERROR: SetLink AutoNegotiation (0.0) Failed
[ 96.540000] NCSI(eth1): ERROR: GetLinkStatus(0.0) Failed
Cannot set new Ethtool settings
[1340 : 1340 CRITICAL][nwcfg.c:5592]Cannot set new Ethtool settings
[PHYCFG] Error setting network link modes for interface: eth1...
**************************************************
* Welcome to PRIMERGY Remote Manager *
License App started* Firmware Revision 9.08F (1.00) *
* SDR 3.16 ID 0458 TX1320M3 *
* Firmware built Mar 5 2018 14:02:35 CEST *
**************************************************
System Type : PRIMERGY TX1320 M3
System ID : YMBK000000
System Name : DE-1433BO01
System OS : Windows Server 2012 R2 Standard
System Status: OK (Identify LED is OFF)
Power Status : Off
Asset Tag : System Asset Tag
Please enter user name : adviserd doesn't have the valid license. So stopping the adviserd service
[ 98.790000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 98.810000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 98.830000] IPv6: ADDRCONF(NETDEV_UP): sit0: link is not ready
[ 98.850000] IPv6: ADDRCONF(NETDEV_UP): ip6tnl0: link is not ready
vmapp doesn't have the valid license. So stopping the vmapp service
rmedia doesn't have the valid license. So stopping the rmedia service
lmedia doesn't have the valid license. So stopping the lmedia service
SNTCI_Backup: config_space_xml_export NoExportDoneCount=208 xmlSize=275632
SNTCI_Backup: XmlFile1 Length & CRC32 NOT CHANGED. No backup needed
PNI_Init: FAILED - Status 5
PNI_Init: FAILED - Status 5
PNI_Init: FAILED - Status 5
PNI_Init: FAILED - Status 5
PNI_Init: FAILED - Status 5
PNI_Init: FAILED - Status 5
[682 : 738 CRITICAL][vmedia_cfg.c:1530]
Unable to find Image config File : /var/lmedia.toc
[ 271.140000] random: nonblocking pool is initialized
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment