ZyXEL GS1910-24HP bootlog

bootlog.txt

+M25PXX : Init device with JEDEC ID 0xC22018.
Luton26 board detected (VSC7427 Rev. C).

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version 1_12_2-customized-z - built 10:29:36, Feb  9 2012

Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
RedBoot is free software, covered by the eCos license, derived from the
GNU General Public License. You are welcome to change it and/or distribute
copies of it under certain conditions. Under the license terms, RedBoot's
source code and full license terms must have been made available to you.
Redboot comes with ABSOLUTELY NO WARRANTY.

Platform: VCore-III (MIPS32 24KEc) LUTON26
RAM: 0x80000000-0x88000000 [0x80020f18-0x87fe1000 available]
FLASH: 0x40000000-0x40ffffff, 256 x 0x10000 blocks
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> diag -a
Hardware self-test: ... Passed
IS1 TCAM self-test: ... Passed
IS2 TCAM self-test: ... Passed
ES0 TCAM self-test: ... Passed
DDR SDRAM: Testing [0x80020f18-0x87fe1000] - Zero  Sweep Done
DDR SDRAM: Testing [0x80020f18-0x87fe1000] - Write Sweep ............................................................................................................................... Done
DDR SDRAM: Testing [0x80020f18-0x87fe1000] - Read  Sweep ............................................................................................................................... Done
3 tests completed successfully.
RedBoot> fis load -d managed
Image loaded from 0x80040000-0x809ab278
RedBoot> go

Press ENTER to get started