Notes on IKEA TRÅDFRI Smart Lighting

Notes

Basic MQTT bridge can be found here:
https://github.com/hardillb/TRADFRI2MQTT


Bridge adds a mDNS entry for a COAP sever:

Service Type: _coap._udp
Service Name: gw:b0-72-bf-25-bf-59
Domain Name: local
Interface: wlan0 IPv4
Address: gw\058b0-72-bf-25-bf-59.local/192.168.1.111:5684
TXT version = 1.0.0008

Wireshark trace shows evidence of DTSL setup for the matching port:
3	8.838970	192.168.1.58	192.168.1.111	DTLSv1.2	111	Client Hello
Internet Protocol Version 4, Src: 192.168.1.58 (192.168.1.58), Dst: 192.168.1.111 (192.168.1.111)
User Datagram Protocol, Src Port: 36237 (36237), Dst Port: coaps (5684)

nodejs node
https://github.com/neustar/node-coap-dtls
Stuggling to get this to connect.

Looks like CoAP can be self describing, which is nice...
https://bitsex.net/software/2017/coap-endpoints-on-ikea-tradfri/


<//15001/reset>;ct=0,

<//15001>;ct=0;obs,
[65536,65537]

<//15001/65537>;ct=0;obs,
{"9001":"Living Room Light","3":{"0":"IKEA of Sweden","1":"TRADFRI bulb E27 opal 1000lm","2":"","3":"1.1.1.0-5.7.2.0","6":1},"9002":1491158817,"9020":1491327551,"9003":65537,"9054":1,"5750":2,"9019":1,"3311":[{"5850":1,"5851":5,"9003":0}]}

<//15001/65536>;ct=0;obs,
{"9001":"Living Room Dimmer","3":{"0":"IKEA of Sweden","1":"TRADFRI wireless dimmer","2":"","3":"1.1.1.1-5.7.2.0","6":3,"9":16},"9002":1491156042,"9020":1491331077,"9003":65536,"9054":0,"5750":0,"9019":1,"15009":[{"9003":0}]}

<//15004>;ct=0;obs,
<//15004/add>;ct=0,
<//15004/remove>;ct=0,

<//15004/138191>;ct=0;obs,
{"9001":"Living Room","9002":1491158740,"9003":138191,"5850":1,"5851":0,"9039":215546,"9018":{"15002":{"9003":[65536,65537]}}}


<//15005>;ct=0;obs,

<//15005/138191>;ct=0;obs,
[197802,215546,197100]

<//15005/138191/197802>;ct=0;obs,
{"9057":0,"9001":"EVERYDAY","9068":1,"9002":1491158740,"9003":197802,"15013":[{"5850":1,"5851":203,"9003":65537}]}

<//15005/138191/215546>;ct=0;obs,
{"9057":1,"9001":"RELAX","9068":1,"9002":1491158740,"9003":215546,"15013":[{"5850":1,"5851":25,"9003":65537}]}

<//15005/138191/197100>;ct=0;obs,
{"9057":2,"9001":"FOCUS","9068":1,"9002":1491158740,"9003":197100,"15013":[{"5850":1,"5851":254,"9003":65537}]}


<//status>;ct=0;obs,
{}

<//15006>;ct=0;obs,
[{"9002":1491247648,"9014":0,"9015":5001},{"9002":1491330758,"9014":0,"9015":1004}]


<//15011/15012>;ct=0;obs,
{"9023":"pool.ntp.org","9029":"1.1.0015","9059":1491333388,"9081":"7e1151520440017d","9060":"2017-04-04T19:16:28.004712Z","9062":0,"9061":0,"9054":0,"9055":0,"9079":0,"9066":5,"9069":1491246077,"9080":0,"9071":1,"9077":0,"9072":0,"9073":0,"9074":0,"9076":0,"9075":0,"9078":0}


<//15011/9030>;ct=0,
<//15011/9031>;ct=0,
<//15011/9033>;ct=0,
<//15011/9034>;ct=0,
<//15011/9063>;ct=0,

<//15010>;ct=0;obs
[]


java -jar cf-client-1.1.0-SNAPSHOT.jar -psk GET coaps://192.168.1.111//15001/65537

{"9001":"Living Room Light","9002":1491158817,"5750":2,"9020":1491232251,"3":{"0":"IKEA of Sweden","1":"TRADFRI bulb E27 opal 1000lm","3":"1.1.1.0-5.7.2.0","2":"","6":1},"9054":0,"9003":65537,"9019":1,"3311":[{"5850":0,"5851":1,"9003":0}]}

java -jar cf-client-1.1.0-SNAPSHOT.jar -psk PUT coaps://192.168.1.111//15001/65537 '{"9001":"Living Room Light","9002":1491158817,"5750":2,"9020":1491232251,"3":{"0":"IKEA of Sweden","1":"TRADFRI bulb E27 opal 1000lm","3":"1.1.1.0-5.7.2.0","2":"","6":1},"9054":0,"9003":65537,"9019":1,"3311":[{"5850":1,"5851":1,"9003":0}]}'

Turned on the light

trimmed-capture.cap

Yeah, I'm really looking for a working nodejs dtls/coap client but I've not found one that actually works yet.

It looks like native DTLS may be on it's way to NodeJS
nodejs/node#2398

Hi there

You mentioned wireshark - the traffic is really easy to decrypt just by entering the preshared key in Preferences -> Protocol -> DTLS -> preshared key (must be entered as hex)

Also, i think it is required with a somewhat new build of wireshark - im using wireshark 2.3.0~rc0 where it decrypts perfectly just by entering the preshared key from the box

Edit: i also think you need to have the entire conversation captured in wireshark at least from the start where the ssl/dtls handshaking takes place... :)

@fasmide my version of wireshark (on Ubuntu 14.04) is too old for DTSL decoding, I need to upgrade at some point, but I'm doing ok with out it.

FYI, looks like ha-bridge issue 570 have become a collective point for links and notes about progress around different integrations and implementations

bwssytems/ha-bridge#570

Some of the new links to code implementations in different programming languages include:

https://github.com/stenehall/homebridge-ikea

https://gist.github.com/hvanderlaan/3d8e11869f86ba94d9d6df1c815af3aa

https://github.com/ggravlingen/home-assistant/blob/master/extraconfig/python_code/ikea.py

https://gist.github.com/r41d/65be2c7a111ac6c32f24d762ba38612c

https://community.home-assistant.io/t/ikea-tradfri-gateway-zigbee-very-basic-working-implementation/14788/20

r41d found an intersting class in the Android App, after decompliling with apktool, it is located in

 com/ikea/tradfri/lighting/ipso/IPSOObjects.java.

Here's his upload: http://sprunge.us/CCQF

DTLS-CoAP wireshark dissector -> https://github.com/msangoi/dtls-coap-dissector