delay routine for c18 (tested with blinking the led)

delay.h

#ifndef DELAY_H_
#define DELAY_H_

#include <delays.h>

#define delay1MicroSecond()	   {Delay10TCYx(1); Delay1TCY(); Delay1TCY();}
#define delay5MicroSecond()		Delay10TCYx(6) 
#define delay10MicroSecond()	Delay10TCYx(12)
#define delay50MicroSecond()	Delay10TCYx(60)
#define delay100MicroSecond()	Delay100TCYx(12)
#define delay200MicroSecond()	Delay100TCYx(24)
#define delay1MiliSecond()		Delay1KTCYx(12)
#define delay5MiliSecond()		Delay1KTCYx(60)
#define delay10MiliSecond()		Delay10KTCYx(12)
#define delay50MiliSecond()		Delay10KTCYx(60)
#define delay100MiliSecond()	Delay10KTCYx(120)	
#define delay200MiliSecond()	Delay10KTCYx(240)
#define delay1Second()		   {Delay10KTCYx(240); Delay10KTCYx(240); Delay10KTCYx(240);\
								Delay10KTCYx(240); Delay10KTCYx(240);}
#define delay2Second()		   {delay1Second(); delay1Second();}
#define delay5Second()		   {delay2Second(); delay2Second(); delay1Second();}
#define delay10Second()		   {delay5Second(); delay5Second();}

#endif

main.c

        #pragma config PLLDIV   = 5         // (20 MHz crystal on PICDEM FS USB board)
        #pragma config CPUDIV   = OSC1_PLL2  
        #pragma config USBDIV   = 2         // Clock source from 96MHz PLL/2
        #pragma config FOSC     = HSPLL_HS
        #pragma config FCMEN    = OFF
        #pragma config IESO     = OFF
        #pragma config PWRT     = OFF
        #pragma config BOR      = ON
        #pragma config BORV     = 3
        #pragma config VREGEN   = ON      //USB Voltage Regulator
        #pragma config WDT      = OFF
        #pragma config WDTPS    = 32768
        #pragma config MCLRE    = ON
        #pragma config LPT1OSC  = OFF
        #pragma config PBADEN   = OFF
//      #pragma config CCP2MX   = ON
        #pragma config STVREN   = ON
        #pragma config LVP      = OFF
//      #pragma config ICPRT    = OFF       // Dedicated In-Circuit Debug/Programming
        #pragma config XINST    = OFF       // Extended Instruction Set
        #pragma config CP0      = OFF
        #pragma config CP1      = OFF
//      #pragma config CP2      = OFF
//      #pragma config CP3      = OFF
        #pragma config CPB      = OFF
//      #pragma config CPD      = OFF
        #pragma config WRT0     = OFF
        #pragma config WRT1     = OFF
//      #pragma config WRT2     = OFF
//      #pragma config WRT3     = OFF
        #pragma config WRTB     = OFF       // Boot Block Write Protection
        #pragma config WRTC     = OFF
//      #pragma config WRTD     = OFF
        #pragma config EBTR0    = OFF
        #pragma config EBTR1    = OFF
//      #pragma config EBTR2    = OFF
//      #pragma config EBTR3    = OFF
        #pragma config EBTRB    = OFF

#include <p18f4553.h>

#include "delay.h"

#define mInitAllLEDs()     	TRISBbits.TRISB6=0; TRISBbits.TRISB7=0;

#define mLED_1              LATBbits.LATB6
#define mLED_2              LATBbits.LATB7

void main()
{
	mInitAllLEDs();
	delay1Second();
	mLED_1 = 1;
	mLED_2 = 1;

	while(1)
	{
		delay1Second();
		mLED_1 = 1;
		mLED_2 = 0;
		delay1Second();
		mLED_1 = 0;
		mLED_2 = 1;
	}
}