Skip to content

Instantly share code, notes, and snippets.

@hazanjon
Created January 21, 2014 02:21
Show Gist options
  • Star 8 You must be signed in to star a gist
  • Fork 4 You must be signed in to fork a gist
  • Save hazanjon/8533381 to your computer and use it in GitHub Desktop.
Save hazanjon/8533381 to your computer and use it in GitHub Desktop.
Hetnzer Network Interface settings for Proxmox and pfSense
### Hetzner Online AG - installimage
# Loopback device:
auto lo
iface lo inet loopback
# device: eth0
auto eth0 ##Hetzner Interface
iface eth0 inet static
address <Main IP>
broadcast <Broadcast IP>
netmask 255.255.255.224
gateway <Gateway IP>
pointopoint <Gateway IP>
# default route to access subnet
up route add -net <Hetzner Route> netmask 255.255.255.224 gw <Gateway IP> eth0
auto vmbr0 ##Main Interface - Used for pfSense and any DMZ VM's
iface vmbr0 inet static
address <Main Hetzner IP>
netmask 255.255.255.224
bridge_ports none
bridge_stp off
bridge_fd 0
##Any Extra IP's (You need at least 1 for the pfSense VM and 1 for every DMZ VM)
up ip route add <Additional IP>/32 dev vmbr0
auto vmbr1 ##pfSense LAN - DHCP on this is controlled by pfSense
iface vmbr1 inet static
address 10.0.0.254
netmask 255.255.255.0
gateway <pfSense IP 10.0.0.x>
bridge_ports none
bridge_stp off
bridge_fd 0
auto vmbr2 ##Internal network between VM's
iface vmbr2 inet manual
bridge_ports none
bridge_stp off
bridge_fd 0
iface eth0 inet6 static
address <Main IPv6>
netmask 64
gateway fe80::1
@hazanjon
Copy link
Author

To setup Proxmox with a pfSense firewall you will need to at least 1 Additional IP. This is used to run both the pfSense VM and any VM's hidden behind.

@wagnst
Copy link

wagnst commented Jan 25, 2015

On Pfsense I set up vmbr0 to be WAN and vmbr1 to be LAN? Every VM will be added to vmbr1 and then managed with fw rules from pfsense?

Do you know if a setup like creating the VLANs on Pfsense and then be able to use tagging in Proxmox without manually distrubuting the subnets / vlans on PVE host itself?

@nklmilojevic
Copy link

Hi,

Did you have problem with setting up PfSense on Proxmox in Hetzner? I can't set the gateway from the other subnet. I tried to add it manually and I can ping and connect to gateway, but pfsense is still not accessible. If you have any ideas, please let me know.

Thanks,

Nikola

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment