Skip to content

Instantly share code, notes, and snippets.

@hazelybell
Created July 12, 2013 23:22
Show Gist options
  • Save hazelybell/5988565 to your computer and use it in GitHub Desktop.
Save hazelybell/5988565 to your computer and use it in GitHub Desktop.
smartctl 5.43 2012-06-05 r3561 [x86_64-linux-3.8.3-bubbles0] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 146585664
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2822
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 21517772694
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8752
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 820
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 253 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 060 051 045 Old_age Always - 40 (Min/Max 30/41)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 135
193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 44209
194 Temperature_Celsius 0x0022 040 049 000 Old_age Always - 40 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 036 023 000 Old_age Always - 146585664
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment