dmesg

thecyborg@debian-server-rpi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.71-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1145 SMP Fri Sep 21 15:38:35 BST 2018
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3ac00000
[    0.000000] On node 0 totalpages: 242688
[    0.000000] free_area_init_node: node 0, pgdat 80c85280, node_mem_map ba39f000
[    0.000000]   Normal zone: 2133 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 242688 pages, LIFO batch:31
[    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
[    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d72b4a58-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 940232K/970752K available (7168K kernel code, 576K rwdata, 2076K rodata, 1024K init, 698K bss, 22328K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
                   lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x80008000 - 0x80800000   (8160 kB)
                     .init : 0x80b00000 - 0x80c00000   (1024 kB)
                     .data : 0x80c00000 - 0x80c9017c   ( 577 kB)
                      .bss : 0x80c97f10 - 0x80d468b0   ( 699 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 25273 entries in 75 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000019] Switching to timer-based delay loop, resolution 52ns
[    0.000270] Console: colour dummy device 80x30
[    0.000289] console [tty1] enabled
[    0.000314] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000329] pid_max: default: 32768 minimum: 301
[    0.000643] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000658] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001593] Disabling memory control group subsystem
[    0.001669] CPU: Testing write buffer coherency: ok
[    0.002079] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002481] Setting up static identity map for 0x100000 - 0x10003c
[    0.002604] Hierarchical SRCU implementation.
[    0.003282] smp: Bringing up secondary CPUs ...
[    0.004061] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004908] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.005739] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.005844] smp: Brought up 1 node, 4 CPUs
[    0.005855] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.005860] CPU: All CPU(s) started in HYP mode.
[    0.005864] CPU: Virtualization extensions available.
[    0.006749] devtmpfs: initialized
[    0.017172] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[    0.017943] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.018166] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018184] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.018739] pinctrl core: initialized pinctrl subsystem
[    0.019482] NET: Registered protocol family 16
[    0.022228] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.027200] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.027208] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.027406] Serial: AMBA PL011 UART driver
[    0.029075] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.029535] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.061379] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[    0.062800] SCSI subsystem initialized
[    0.063027] usbcore: registered new interface driver usbfs
[    0.063079] usbcore: registered new interface driver hub
[    0.063163] usbcore: registered new device driver usb
[    0.070088] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-09-21 15:43
[    0.071499] clocksource: Switched to clocksource arch_sys_counter
[    0.148666] VFS: Disk quotas dquot_6.6.0
[    0.148747] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.148932] FS-Cache: Loaded
[    0.149116] CacheFiles: Loaded
[    0.157118] NET: Registered protocol family 2
[    0.157839] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.157949] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.158134] TCP: Hash tables configured (established 8192 bind 8192)
[    0.158261] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.158306] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.158530] NET: Registered protocol family 1
[    0.158986] RPC: Registered named UNIX socket transport module.
[    0.158992] RPC: Registered udp transport module.
[    0.158997] RPC: Registered tcp transport module.
[    0.159002] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.160670] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.163447] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.171652] FS-Cache: Netfs 'nfs' registered for caching
[    0.172254] NFS: Registering the id_resolver key type
[    0.172284] Key type id_resolver registered
[    0.172289] Key type id_legacy registered
[    0.172304] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.174240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.174373] io scheduler noop registered
[    0.174380] io scheduler deadline registered (default)
[    0.174659] io scheduler cfq registered
[    0.174666] io scheduler mq-deadline registered
[    0.174672] io scheduler kyber registered
[    0.176972] BCM2708FB: allocated DMA memory fad00000
[    0.176998] BCM2708FB: allocated DMA channel 0 @ bb813000
[    0.231497] NOHZ: local_softirq_pending 80
[    0.234634] Console: switching to colour frame buffer device 240x67
[    0.269600] bcm2835-rng 3f104000.rng: hwrng registered
[    0.269725] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.270197] vc-sm: Videocore shared memory driver
[    0.270472] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.280325] brd: module loaded
[    0.289467] loop: module loaded
[    0.289482] Loading iSCSI transport class v2.0-870.
[    0.290199] libphy: Fixed MDIO Bus: probed
[    0.290302] usbcore: registered new interface driver lan78xx
[    0.290357] usbcore: registered new interface driver smsc95xx
[    0.290372] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.318291] dwc_otg 3f980000.usb: base=0xf0980000
[    0.411495] NOHZ: local_softirq_pending 80
[    0.431495] NOHZ: local_softirq_pending 80
[    0.451495] NOHZ: local_softirq_pending 80
[    0.471494] NOHZ: local_softirq_pending 80
[    0.491495] NOHZ: local_softirq_pending 80
[    0.511494] NOHZ: local_softirq_pending 80
[    0.518535] Core Release: 2.80a
[    0.518544] Setting default values for core params
[    0.518577] Finished setting default values for core params
[    0.718838] Using Buffer DMA mode
[    0.718844] Periodic Transfer Interrupt Enhancement - disabled
[    0.718850] Multiprocessor Interrupt Enhancement - disabled
[    0.718857] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.718869] Dedicated Tx FIFOs mode
[    0.719234] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[    0.719259] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.719267] dwc_otg: Microframe scheduler enabled
[    0.719323] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e9c5c
[    0.719334] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e9fc4 length 36
[    0.719348] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[    0.719401] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.719433] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.719465] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.719515] Init: Port Power? op_state=1
[    0.719520] Init: Power Port (0)
[    0.719730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.719741] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.719749] usb usb1: Product: DWC OTG Controller
[    0.719758] usb usb1: Manufacturer: Linux 4.14.71-v7+ dwc_otg_hcd
[    0.719766] usb usb1: SerialNumber: 3f980000.usb
[    0.720399] hub 1-0:1.0: USB hub found
[    0.720442] hub 1-0:1.0: 1 port detected
[    0.720988] dwc_otg: FIQ enabled
[    0.720993] dwc_otg: NAK holdoff enabled
[    0.720999] dwc_otg: FIQ split-transaction FSM enabled
[    0.721009] Module dwc_common_port init
[    0.721268] usbcore: registered new interface driver usb-storage
[    0.721445] mousedev: PS/2 mouse device common for all mice
[    0.721554] IR NEC protocol handler initialized
[    0.721561] IR RC5(x/sz) protocol handler initialized
[    0.721567] IR RC6 protocol handler initialized
[    0.721571] IR JVC protocol handler initialized
[    0.721577] IR Sony protocol handler initialized
[    0.721582] IR SANYO protocol handler initialized
[    0.721587] IR Sharp protocol handler initialized
[    0.721592] IR MCE Keyboard/mouse protocol handler initialized
[    0.721597] IR XMP protocol handler initialized
[    0.722297] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.722568] bcm2835-cpufreq: min=600000 max=1400000
[    0.722914] sdhci: Secure Digital Host Controller Interface driver
[    0.722918] sdhci: Copyright(c) Pierre Ossman
[    0.723280] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.723600] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.723690] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.725127] ledtrig-cpu: registered to indicate activity on CPUs
[    0.725275] hidraw: raw HID events driver (C) Jiri Kosina
[    0.725438] usbcore: registered new interface driver usbhid
[    0.725443] usbhid: USB HID core driver
[    0.726081] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[    0.727654] [vc_sm_connected_init]: start
[    0.738331] [vc_sm_connected_init]: end - returning 0
[    0.738928] Initializing XFRM netlink socket
[    0.738952] NET: Registered protocol family 17
[    0.739050] Key type dns_resolver registered
[    0.739596] Registering SWP/SWPB emulation handler
[    0.740195] registered taskstats version 1
[    0.746313] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.746391] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.748321] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.748331] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    0.802135] sdhost: log_buf @ bad13000 (fad13000)
[    0.839994] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.841566] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.843118] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.845895] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.881518] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.882613] of_cfs_init
[    0.882705] of_cfs_init: OK
[    0.883298] Waiting for root device PARTUUID=d72b4a58-02...
[    0.924146] random: fast init done
[    0.931394] mmc1: new high speed SDIO card at address 0001
[    0.931912] Indeed it is in host mode hprt0 = 00021501
[    0.998856] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.001674] mmc0: new high speed SDXC card at address 0001
[    1.002189] mmcblk0: mmc0:0001 00000 119 GiB
[    1.003587]  mmcblk0: p1 p2
[    1.041735] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    1.041744] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    1.097985] NOHZ: local_softirq_pending 40
[    1.133221] NOHZ: local_softirq_pending 40
[    1.141532] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.141656] Indeed it is in host mode hprt0 = 00001101
[    1.280730] NOHZ: local_softirq_pending 40
[    1.381869] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[    1.381887] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.382637] hub 1-1:1.0: USB hub found
[    1.382740] hub 1-1:1.0: 4 ports detected
[    1.701532] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.831837] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[    1.831850] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.832479] hub 1-1.1:1.0: USB hub found
[    1.832557] hub 1-1.1:1.0: 3 ports detected
[    2.185330] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[    2.327094] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    2.327559] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[    2.327566] EXT4-fs (mmcblk0p2): recovery complete
[    2.358074] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.358144] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.366330] devtmpfs: mounted
[    2.369439] Freeing unused kernel memory: 1024K
[    2.571551] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[    2.702000] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[    2.702017] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.800900] systemd[1]: System time before build time, advancing clock.
[    2.935891] NET: Registered protocol family 10
[    2.937017] Segment Routing with IPv6
[    2.947004] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.969178] random: systemd: uninitialized urandom read (16 bytes read)
[    2.977170] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.977816] systemd[1]: Detected architecture arm.
[    2.980451] systemd[1]: Set hostname to <debian-server-rpi>.
[    2.994250] libphy: lan78xx-mdiobus: probed
[    3.020014] random: systemd: uninitialized urandom read (16 bytes read)
[    3.039998] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    3.456591] systemd[1]: postfix.service: Cannot add dependency job, ignoring: Unit postfix.service is masked.
[    3.457405] systemd[1]: vsftpd.service: Cannot add dependency job, ignoring: Unit vsftpd.service is masked.
[    3.464397] systemd[1]: Listening on udev Control Socket.
[    3.470406] systemd[1]: Listening on udev Kernel Socket.
[    3.470821] systemd[1]: Listening on Journal Socket.
[    3.471232] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.472161] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.548482] i2c /dev entries driver
[    4.275853] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard
[    4.355475] systemd-journald[94]: Received request to flush runtime journal from PID 1
[    4.836854] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    4.851599] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[    4.974720] brcmfmac: F1 signature read @0x18000000=0x15264345
[    4.994661] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[    4.995404] usbcore: registered new interface driver brcmfmac
[    5.272999] random: crng init done
[    5.273015] random: 7 urandom warning(s) missed due to ratelimiting
[    5.325123] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[    5.325786] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28 
[    6.147383] uart-pl011 3f201000.serial: no DMA platform data
[    7.309763] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.320247] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.233207] Adding 102396k swap on /var/swap.  Priority:-2 extents:2 across:118780k SSFS
[   13.359383] Bluetooth: Core ver 2.22
[   13.359436] NET: Registered protocol family 31
[   13.359439] Bluetooth: HCI device and connection manager initialized
[   13.359457] Bluetooth: HCI socket layer initialized
[   13.359465] Bluetooth: L2CAP socket layer initialized
[   13.359483] Bluetooth: SCO socket layer initialized
[   13.382305] Bluetooth: HCI UART driver ver 2.3
[   13.382313] Bluetooth: HCI UART protocol H4 registered
[   13.382317] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   13.382436] Bluetooth: HCI UART protocol Broadcom registered
[   13.706127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.706140] Bluetooth: BNEP filters: protocol multicast
[   13.706162] Bluetooth: BNEP socket layer initialized
[   13.799014] Bluetooth: RFCOMM TTY layer initialized
[   13.799038] Bluetooth: RFCOMM socket layer initialized
[   13.799064] Bluetooth: RFCOMM ver 1.11
[   14.313214] fuse init (API version 7.26)
thecyborg@debian-server-rpi:~ $