Skip to content

Instantly share code, notes, and snippets.

@heftig
Created June 26, 2010 14:45
Show Gist options
  • Save heftig/454098 to your computer and use it in GitHub Desktop.
Save heftig/454098 to your computer and use it in GitHub Desktop.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-git (jan@silver) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 ZEN SMP PREEMPT Thu Jun 24 07:07:24 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26-git root=/dev/disk/by-label/root resume=swap:/dev/disk/by-label/swap ro quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
NX (Execute Disable) protection: active
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 13C000000 mask FFC000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 0BF700000 mask FFFF00000 uncachable
5 base 0BF800000 mask FFF800000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 5056MB, range: 64MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 3063MB, range: 1MB, type UC
reg 5, base: 3064MB, range: 8MB, type UC
total RAM covered: 4023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3063MB, range: 1MB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
reg 4, base: 4GB, range: 1GB, type WB
reg 5, base: 5056MB, range: 64MB, type UC
e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009d800 (usable)
modified: 000000000009d800 - 00000000000a0000 (reserved)
modified: 00000000000d2000 - 00000000000d4000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf6b0000 (usable)
modified: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
modified: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
modified: 00000000bf700000 - 00000000c0000000 (reserved)
modified: 00000000f0000000 - 00000000f4000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000013c000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f6980] f6980
init_memory_mapping: 0000000000000000-00000000bf6b0000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf6b0000 page 4k
kernel direct mapping tables up to bf6b0000 @ 16000-1b000
init_memory_mapping: 0000000100000000-000000013c000000
0100000000 - 013c000000 page 2M
kernel direct mapping tables up to 13c000000 @ 19000-1f000
RAMDISK: 37dfe000 - 37ff0000
ACPI: RSDP 00000000000f6950 00024 (v02 LENOVO)
ACPI: XSDT 00000000bf6bcd52 00094 (v01 LENOVO TP-7S 00001230 LTP 00000000)
ACPI: FACP 00000000bf6bce00 000F4 (v03 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100121/tbfadt-527)
ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20100121/tbfadt-558)
ACPI: DSDT 00000000bf6bd1db 0E940 (v01 LENOVO TP-7S 00001230 MSFT 03000000)
ACPI: FACS 00000000bf6e4000 00040
ACPI: SSDT 00000000bf6bcfb4 00227 (v01 LENOVO TP-7S 00001230 MSFT 03000000)
ACPI: ECDT 00000000bf6cbb1b 00052 (v01 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI: TCPA 00000000bf6cbb6d 00032 (v02 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI: APIC 00000000bf6cbb9f 00068 (v01 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI: MCFG 00000000bf6cbc07 0003C (v01 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI: HPET 00000000bf6cbc43 00038 (v01 LENOVO TP-7S 00001230 LNVO 00000001)
ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7S 00001230 LTP 00000000)
ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7S 00001230 LTP 00000001)
ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7S 00001230 PTL 00000001)
ACPI: SSDT 00000000bf6e2697 0025F (v01 LENOVO TP-7S 00001230 INTL 20050513)
ACPI: SSDT 00000000bf6e28f6 000A6 (v01 LENOVO TP-7S 00001230 INTL 20050513)
ACPI: SSDT 00000000bf6e299c 004F7 (v01 LENOVO TP-7S 00001230 INTL 20050513)
ACPI: SSDT 00000000bf6e2e93 001D8 (v01 LENOVO TP-7S 00001230 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad X61
ACPI: Added _OSI(Linux)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0013c000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bf6b0
0: 0x00100000 -> 0x0013c000
On node 0 totalpages: 1029693
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3925 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765672 pages, LIFO batch:31
Normal zone: 3360 pages used for memmap
Normal zone: 242400 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [1a300 - 1aaff]
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000
PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000
PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88552 r8192 d22040 u1048576
pcpu-alloc: s88552 r8192 d22040 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
early_res array is doubled to 128 at [1ab00 - 1baff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1011997
Kernel command line: BOOT_IMAGE=/vmlinuz26-git root=/dev/disk/by-label/root resume=swap:/dev/disk/by-label/swap ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (61 early reservations)
#1 [0001000000 - 00016fbaf8] TEXT DATA BSS
#2 [0037dfe000 - 0037ff0000] RAMDISK
#3 [00016fc000 - 00016fc198] BRK
#4 [00000f6990 - 0000100000] BIOS reserved
#5 [00000f6980 - 00000f6990] MP-table mpf
#6 [000009d800 - 000009dca1] BIOS reserved
#7 [000009ddad - 00000f6980] BIOS reserved
#8 [000009dca1 - 000009ddad] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000019000] PGTABLE
#12 [0000019000 - 000001a000] PGTABLE
#13 [00016fc1c0 - 00016fd1c0] BOOTMEM
#14 [000001a000 - 000001a300] BOOTMEM
#15 [0001efe000 - 0001eff000] BOOTMEM
#16 [0001eff000 - 0001f00000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00016fd1c0 - 00017151c0] BOOTMEM
#19 [00017151c0 - 000172d1c0] BOOTMEM
#20 [000172d1c0 - 00017451c0] BOOTMEM
#21 [0001746000 - 0001747000] BOOTMEM
#22 [00016fbb00 - 00016fbb41] BOOTMEM
#23 [00016fbb80 - 00016fbbc3] BOOTMEM
#24 [00016fbc00 - 00016fbfb8] BOOTMEM
#25 [00017451c0 - 0001745228] BOOTMEM
#26 [0001745240 - 00017452a8] BOOTMEM
#27 [00017452c0 - 0001745328] BOOTMEM
#28 [0001745340 - 00017453a8] BOOTMEM
#29 [00017453c0 - 0001745428] BOOTMEM
#30 [0001745440 - 00017454a8] BOOTMEM
#31 [00017454c0 - 0001745528] BOOTMEM
#32 [0001745540 - 00017455a8] BOOTMEM
#33 [00017455c0 - 0001745628] BOOTMEM
#34 [0001745640 - 00017456a8] BOOTMEM
#35 [00017456c0 - 0001745728] BOOTMEM
#36 [0001745740 - 00017457a8] BOOTMEM
#37 [00017457c0 - 0001745828] BOOTMEM
#38 [0001745840 - 00017458a8] BOOTMEM
#39 [00017458c0 - 0001745928] BOOTMEM
#40 [0001745940 - 00017459a8] BOOTMEM
#41 [00016fbfc0 - 00016fbfe0] BOOTMEM
#42 [00017459c0 - 00017459e0] BOOTMEM
#43 [0001745a00 - 0001745a64] BOOTMEM
#44 [0001745a80 - 0001745ae4] BOOTMEM
#45 [0001800000 - 000181d000] BOOTMEM
#46 [0001900000 - 000191d000] BOOTMEM
#47 [0001745b00 - 0001745b08] BOOTMEM
#48 [0001745b40 - 0001745b48] BOOTMEM
#49 [0001745b80 - 0001745b88] BOOTMEM
#50 [0001745bc0 - 0001745bd0] BOOTMEM
#51 [0001745c00 - 0001745d40] BOOTMEM
#52 [0001745d40 - 0001745da0] BOOTMEM
#53 [0001745dc0 - 0001745e20] BOOTMEM
#54 [0001747000 - 000174f000] BOOTMEM
#55 [000191d000 - 0001d1d000] BOOTMEM
#56 [0005800000 - 0005a00000] BOOTMEM
#57 [0005a00000 - 0009a00000] BOOTMEM
#58 [000174f000 - 000176f000] BOOTMEM
#59 [000176f000 - 00017af000] BOOTMEM
#60 [000001bb00 - 0000023b00] BOOTMEM
Memory: 3979568k/5177344k available (3644k kernel code, 1058572k absent, 139204k reserved, 1742k data, 496k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1595.939 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.87 BogoMIPS (lpj=1595939)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100121
ACPI: Checking initramfs for custom DSDT
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b
Booting Node 0, Processors #1 Ok.
TSC synchronization [CPU#0 -> CPU#1]:
Measured 261312 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (6383.72 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: SSDT 00000000bf6e1d72 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e2079 0061E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1caa 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1ff4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xf80fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
pci 0000:00:02.1: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
pci 0000:00:03.0: reg 10: [mem 0xf8426800-0xf842680f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10: [io 0x1828-0x182f]
pci 0000:00:03.2: reg 14: [io 0x180c-0x180f]
pci 0000:00:03.2: reg 18: [io 0x1820-0x1827]
pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b]
pci 0000:00:03.2: reg 20: [io 0x1810-0x181f]
pci 0000:00:03.3: reg 10: [io 0x1830-0x1837]
pci 0000:00:03.3: reg 14: [mem 0xf8224000-0xf8224fff]
pci 0000:00:19.0: reg 10: [mem 0xf8200000-0xf821ffff]
pci 0000:00:19.0: reg 14: [mem 0xf8225000-0xf8225fff]
pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
pci 0000:00:1a.7: reg 10: [mem 0xf8426c00-0xf8426fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8220000-0xf8223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
pci 0000:00:1d.7: reg 10: [mem 0xf8427000-0xf84273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x18e0-0x18ef]
pci 0000:00:1f.2: reg 10: [io 0x1c30-0x1c37]
pci 0000:00:1f.2: reg 14: [io 0x1c24-0x1c27]
pci 0000:00:1f.2: reg 18: [io 0x1c28-0x1c2f]
pci 0000:00:1f.2: reg 1c: [io 0x1c20-0x1c23]
pci 0000:00:1f.2: reg 20: [io 0x1c00-0x1c1f]
pci 0000:00:1f.2: reg 24: [mem 0xf8426000-0xf84267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf8427400-0xf84274ff]
pci 0000:00:1f.3: reg 20: [io 0x1c40-0x1c5f]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf85fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xf7f00000-0xf7f01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf86fffff 64bit pref]
pci 0000:05:00.0: reg 10: [mem 0xd7eff000-0xd7efffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10: [mem 0xd7efe800-0xd7efefff]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:05:00.2: reg 10: [mem 0xd7efe400-0xd7efe4ff]
pci 0000:05:00.2: supports D1 D2
pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd7efffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bf6b0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x1000-0x107f] has been reserved
system 00:02: [io 0x1180-0x11bf] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8500000-0xf85fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf86fffff 64bit pref]
pci 0000:05:00.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
pci 0000:05:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:05:00.0: BAR 13: assigned [io 0x4000-0x40ff]
pci 0000:05:00.0: BAR 14: assigned [io 0x4400-0x44ff]
pci 0000:05:00.0: CardBus bridge to [bus 06-07]
pci 0000:05:00.0: bridge window [io 0x4000-0x40ff]
pci 0000:05:00.0: bridge window [io 0x4400-0x44ff]
pci 0000:05:00.0: bridge window [mem 0xd8000000-0xdbffffff pref]
pci 0000:05:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-08]
pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd7efffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:02: resource 2 [mem 0xf8500000-0xf85fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:03: resource 2 [mem 0xf8600000-0xf86fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x7fff]
pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd7efffff]
pci_bus 0000:05: resource 2 [mem 0xd8000000-0xdbffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:05: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:06: resource 0 [io 0x4000-0x40ff]
pci_bus 0000:06: resource 1 [io 0x4400-0x44ff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xdbffffff pref]
pci_bus 0000:06: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 1992k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1277387881.065:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7776
alg: No test for lzf (lzf-generic)
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler sio registered
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
Linux agpgart interface v0.103
tpm_tis 00:0b: 1.2 TPM (device-id 0x3203, rev-id 9)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 00:0a: activated
00:0a: ttyS0 at I/O 0x200 (irq = 5) is a NS16550A
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
TuxOnIce 3.1.1 (http://tuxonice.net)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TuxOnIce: Can't translate "/dev/disk/by-label/swap" into a device id yet.
PM: Checking image partition swap:/dev/disk/by-label/swap
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 496k freed
CFS CPU scheduler.
udev: starting version 157
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 26 for MSI/MSI-X
[drm] set up 7M of stolen space
[drm] initialized overlay support
Console: switching to colour frame buffer device 175x65
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:01: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8426c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8427000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
SCSI subsystem initialized
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
libata version 3.00 loaded.
pata_acpi 0000:00:03.2: enabling device (0004 -> 0005)
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
pata_acpi 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT C disabled
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
ata2: port disabled. ignoring.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 27
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 27
usb 3-1: new full speed USB device using uhci_hcd and address 2
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
TuxOnIce: No image found.
Pid: 1, comm: init Not tainted 2.6.34-git #1
Call Trace:
[<ffffffff810913a9>] free_update_stats+0x79/0x80
[<ffffffff81091522>] toi_free_page+0x52/0x70
[<ffffffff810a09ea>] forget_signature_page+0x3a/0xd0
[<ffffffff8109e0fe>] toi_bio_cleanup+0x2e/0x70
[<ffffffff81090da3>] toi_cleanup_modules+0x43/0x70
[<ffffffff81093190>] toi_finish_anything+0x10/0x80
[<ffffffff81091a95>] toi_attr_store+0x85/0x300
[<ffffffff811a0e40>] sysfs_write_file+0xe0/0x160
[<ffffffff8113a746>] vfs_write+0xb6/0x190
[<ffffffff8113aa7c>] sys_write+0x4c/0x80
[<ffffffff81009ec2>] system_call_fastpath+0x16/0x1b
Idx Allocs Frees Tests Fails Max Description
38 0 1 0 0 0 setting swap signature
Btrfs loaded
device label root devid 1 transid 192850 /dev/sda4
device label root devid 1 transid 192850 /dev/disk/by-label/root
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 157
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
input: PC Speaker as /devices/platform/pcspkr/input/input5
sd 2:0:0:0: Attached scsi generic sg0 type 0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (57 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (60 C)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
thinkpad_ec: thinkpad_ec 0.40 loaded.
hdaps: initial mode latch is 0x05
hdaps: setting ec_rate=250, filter_order=2
hdaps: device successfully initialized.
input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input7
input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input8
hdaps: driver successfully loaded.
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
tp_smapi 0.40 loading...
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:05:00.0: Socket status: 30000006
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff]
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd7efffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd7efffff: excluding 0xd7b10000-0xd7efffff
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: clean.
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0x000dc000-0x000dffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0dc000-0x0dffff: clean.
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xfebfffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xfebfffff: excluding 0xc0000000-0xc47fffff 0xd7800000-0xdbffffff 0xe0000000-0xf87fffff 0xfe800000-0xfeffffff
yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xfed40000-0xfed4bfff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xfed40000-0xfed4bfff: excluding 0xfed44000-0xfed4bfff
tp_smapi successfully loaded (smapi_port=0xb2).
firewire_ohci 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:00.2: setting latency timer to 64
Non-volatile memory driver v1.3
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7SET37WW (1.23 ), EC 7RHT16WW-1.02
thinkpad_acpi: Lenovo ThinkPad X61 Tablet, model 776395G
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
mmc0: new high speed SD card at address 0002
mmcblk0: mmc0:0002 3.67 GiB
mmcblk0: unknown partition table
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
firewire_core: created device fw0: GUID 000ae401d728e4c9, S400
iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
usb 3-2: new full speed USB device using uhci_hcd and address 3
phy0: Selected rate control algorithm 'iwl-agn-rs'
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:8e:4c:99
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
btrfs: use compression
btrfs: use compression
EXT4-fs (sda2): mounted filesystem with ordered data mode
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
usb 3-2: USB disconnect, address 3
ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
ramzswap: Creating 1 devices ...
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
fuse init (API version 7.13)
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
ramzswap: Backing swap set to /dev/disk/by-label/swap
ramzswap: Using backing swap device: /dev/disk/by-label/swap
ramzswap: Memory limit not set.
ramzswap: Using default: smaller of (15% of RAM) and (backing disk size).
Adding 4757500k swap on /dev/ramzswap0. Priority:10 extents:1 across:4757500k
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating from 00:24:fe:a0:57:2b by local choice (reason=3)
wlan0: authenticate with 00:24:fe:a0:57:2b (try 1)
wlan0: authenticated
wlan0: associate with 00:24:fe:a0:57:2b (try 1)
wlan0: RX AssocResp from 00:24:fe:a0:57:2b (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
CE: hpet increased min_delta_ns to 7500 nsec
CE: hpet increased min_delta_ns to 11250 nsec
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:fe:a0:57:2b tid = 0
CPUFREQ: Per core conservative sysfs interface is deprecated - up_threshold
Monitor-Mwait will be used to enter C-3 state
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xf
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:fe:a0:57:2b tid = 6
CE: hpet increased min_delta_ns to 16875 nsec
CE: hpet increased min_delta_ns to 25312 nsec
dosemu.bin[6091]: segfault at f0000 ip 00007fa4db3e3bcb sp 00007fff4c4b6b48 error 6 in libc-2.12.so[7fa4db364000+153000]
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
dosemu.bin[7268]: segfault at f0000 ip 00007fb619290bcb sp 00007fffa0e9a9a8 error 6 in libc-2.12.so[7fb619211000+153000]
gpm[29498] trap divide error ip:4040a1 sp:7fffbb14e7c0 error:0 in gpm[400000+15000]
gpm[30020] trap divide error ip:4040a1 sp:7fffcb15f560 error:0 in gpm[400000+15000]
gpm[30085] trap divide error ip:4040a1 sp:7fffdfe112e0 error:0 in gpm[400000+15000]
mac80211-phy0: failed to remove key (0, 00:24:fe:a0:57:2b) from hardware (-22)
wlan0: deauthenticating from 00:24:fe:a0:57:2b by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan0: deauthenticating from 00:24:fe:a0:57:2b by local choice (reason=3)
wlan0: authenticate with 00:24:fe:a0:57:2b (try 1)
wlan0: authenticated
wlan0: associate with 00:24:fe:a0:57:2b (try 1)
wlan0: RX AssocResp from 00:24:fe:a0:57:2b (capab=0x431 status=0 aid=1)
wlan0: associated
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:fe:a0:57:2b tid = 0
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:fe:a0:57:2b tid = 6
snd_pcm_oss: Unknown parameter `snd-mixer-oss'
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xf
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xf
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xf
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
test.exe[8517]: segfault at 1 ip 0000000000000001 sp 00007fff15fade58 error 14 in test.exe[7f7646bca000+12000]
test.exe[8662]: segfault at 1 ip 0000000000000001 sp 00007fff5fdde618 error 14 in test.exe[7ff7d3990000+12000]
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xf
ata3: SError: { PHYRdyChg CommWake }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3: EH complete
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment