Skip to content

Instantly share code, notes, and snippets.

@hgfischer
Last active April 11, 2024 22:09
Show Gist options
  • Save hgfischer/7965620 to your computer and use it in GitHub Desktop.
Save hgfischer/7965620 to your computer and use it in GitHub Desktop.
Benchmarking Nginx with Go

Benchmarking Nginx with Go

There are a lot of ways to serve a Go HTTP application. The best choices depend on each use case. Currently nginx looks to be the standard web server for every new project even though there are other great web servers as well. However, how much is the overhead of serving a Go application behind an nginx server? Do we need some nginx features (vhosts, load balancing, cache, etc) or can you serve directly from Go? If you need nginx, what is the fastest connection mechanism? This are the kind of questions I'm intended to answer here. The purpose of this benchmark is not to tell that Go is faster or slower than nginx. That would be stupid.

So, these are the different settings we are going to compare:

  • Go HTTP standalone (as the control group)
  • Nginx proxy to Go HTTP
  • Nginx fastcgi to Go TCP FastCGI
  • Nginx fastcgi to Go Unix Socket FastCGI

Hardware

The hardware is a very cheap one. Since we will compare all settings in the same hardware, this should not be a big deal.

  • Samsung Laptop NP550P5C-AD1BR
  • Intel Core i7 3630QM @2.4GHz (quad core, 8 threads)
  • CPU caches: (L1: 256KiB, L2: 1MiB, L3: 6MiB)
  • RAM 8GiB DDR3 1600MHz

Software

  • Ubuntu 13.10 amd64 Saucy Salamander (updated)
  • Nginx 1.4.4 (1.4.4-1~saucy0 amd64)
  • Go 1.2 (linux/amd64)
  • wrk 3.0.4

Settings

Kernel

Just a little bit tuning in the kernel to allow higher limits. If you have some better idea with this variables, please drop a comment bellow:

fs.file-max                    9999999
fs.nr_open                     9999999
net.core.netdev_max_backlog    4096
net.core.rmem_max              16777216
net.core.somaxconn             65535
net.core.wmem_max              16777216
net.ipv4.ip_forward            0
net.ipv4.ip_local_port_range   1025       65535
net.ipv4.tcp_fin_timeout       30
net.ipv4.tcp_keepalive_time    30
net.ipv4.tcp_max_syn_backlog   20480
net.ipv4.tcp_max_tw_buckets    400000
net.ipv4.tcp_no_metrics_save   1
net.ipv4.tcp_syn_retries       2
net.ipv4.tcp_synack_retries    2
net.ipv4.tcp_tw_recycle        1
net.ipv4.tcp_tw_reuse          1
vm.min_free_kbytes             65536
vm.overcommit_memory           1

Limits

The max open files limit for root and www-data was configured to be 200,000.

Nginx

Some nginx tuning is needed. As some folks told me, I disabled gzip to be more fair in the comparisons. Here is its config file /etc/nginx/nginx.conf:

user www-data;
worker_processes auto;
worker_rlimit_nofile 200000;
pid /var/run/nginx.pid;

events {
	worker_connections 10000;
	use epoll;
	multi_accept on;
}

http {
	sendfile on;
	tcp_nopush on;
	tcp_nodelay on;
	keepalive_timeout 300;
	keepalive_requests 10000;
	types_hash_max_size 2048;

	open_file_cache max=200000 inactive=300s; 
	open_file_cache_valid 300s; 
	open_file_cache_min_uses 2;
	open_file_cache_errors on;

	server_tokens off;
	dav_methods off;

	include /etc/nginx/mime.types;
	default_type application/octet-stream;

	access_log /var/log/nginx/access.log combined;
	error_log /var/log/nginx/error.log warn;

	gzip off;
	gzip_vary off;

	include /etc/nginx/conf.d/*.conf;
	include /etc/nginx/sites-enabled/*.conf;
}

Nginx vhosts

upstream go_http {
	server 127.0.0.1:8080;
	keepalive 300;
}

server {
	listen 80;
	server_name go.http;
	access_log off;
	error_log /dev/null crit;

	location / {
		proxy_pass http://go_http;
		proxy_http_version 1.1;
		proxy_set_header Connection "";
	}
}

upstream go_fcgi_tcp {
	server 127.0.0.1:9001;
	keepalive 300;
}

server {
	listen 80;
	server_name go.fcgi.tcp;
	access_log off;
	error_log /dev/null crit;

	location / {
		include fastcgi_params;
		fastcgi_keep_conn on;
		fastcgi_pass go_fcgi_tcp;
	}
}

upstream go_fcgi_unix {
	server unix:/tmp/go.sock;
	keepalive 300;
}

server {
	listen 80;
	server_name go.fcgi.unix;
	access_log off;
	error_log /dev/null crit;

	location / {
		include fastcgi_params;
		fastcgi_keep_conn on;
		fastcgi_pass go_fcgi_unix;
	}
}

The Go code

package main

import (
	"fmt"
	"log"
	"net"
	"net/http"
	"net/http/fcgi"
	"os"
	"os/signal"
	"syscall"
)

var (
	abort bool
)

const (
	SOCK = "/tmp/go.sock"
)

type Server struct {
}

func (s Server) ServeHTTP(w http.ResponseWriter, r *http.Request) {
	body := "Hello World\n"
	// Try to keep the same amount of headers
	w.Header().Set("Server", "gophr")
	w.Header().Set("Connection", "keep-alive")
	w.Header().Set("Content-Type", "text/plain")
	w.Header().Set("Content-Length", fmt.Sprint(len(body)))
	fmt.Fprint(w, body)
}

func main() {
	sigchan := make(chan os.Signal, 1)
	signal.Notify(sigchan, os.Interrupt)
	signal.Notify(sigchan, syscall.SIGTERM)

	server := Server{}

	go func() {
		http.Handle("/", server)
		if err := http.ListenAndServe(":8080", nil); err != nil {
			log.Fatal(err)
		}
	}()

	go func() {
		tcp, err := net.Listen("tcp", ":9001")
		if err != nil {
			log.Fatal(err)
		}
		fcgi.Serve(tcp, server)
	}()

	go func() {
		unix, err := net.Listen("unix", SOCK)
		if err != nil {
			log.Fatal(err)
		}
		fcgi.Serve(unix, server)
	}()

	<-sigchan

	if err := os.Remove(SOCK); err != nil {
		log.Fatal(err)
	}
}

Check the HTTP headers

To be fair all requests must have the same size.

$ curl -sI http://127.0.0.1:8080/ 
HTTP/1.1 200 OK
Connection: keep-alive
Content-Length: 12
Content-Type: text/plain
Server: gophr
Date: Sun, 15 Dec 2013 14:59:14 GMT

$ curl -sI http://127.0.0.1:8080/ | wc -c
141
$ curl -sI http://go.http/ 
HTTP/1.1 200 OK
Server: nginx
Date: Sun, 15 Dec 2013 14:59:31 GMT
Content-Type: text/plain
Content-Length: 12
Connection: keep-alive

$ curl -sI http://go.http/ | wc -c
141
$ curl -sI http://go.fcgi.tcp/ 
HTTP/1.1 200 OK
Content-Type: text/plain
Content-Length: 12
Connection: keep-alive
Date: Sun, 15 Dec 2013 14:59:40 GMT
Server: gophr

$ curl -sI http://go.fcgi.tcp/ | wc -c
141
$ curl -sI http://go.fcgi.unix/
HTTP/1.1 200 OK
Content-Type: text/plain
Content-Length: 12
Connection: keep-alive
Date: Sun, 15 Dec 2013 15:00:15 GMT
Server: gophr

$ curl -sI http://go.fcgi.unix/ | wc -c
141

Start your engines!

  • Configure kernel with sysctl
  • Configure nginx
  • Configure nginx vhosts
  • Load the server as www-data
  • Run the benchmarks

The benchmarks

GOMAXPROCS = 1

Go standalone
# wrk -t100 -c5000 -d30s http://127.0.0.1:8080/
Running 30s test @ http://127.0.0.1:8080/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   116.96ms   17.76ms 173.96ms   85.31%
    Req/Sec   429.16     49.20   589.00     69.44%
  1281567 requests in 29.98s, 215.11MB read
Requests/sec:  42745.15
Transfer/sec:      7.17MB
Nginx + Go through HTTP
# wrk -t100 -c5000 -d30s http://go.http/
Running 30s test @ http://go.http/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   124.57ms   18.26ms 209.70ms   80.17%
    Req/Sec   406.29     56.94     0.87k    89.41%
  1198450 requests in 29.97s, 201.16MB read
Requests/sec:  39991.57
Transfer/sec:      6.71MB
Nginx + Go through FastCGI TCP
# wrk -t100 -c5000 -d30s http://go.fcgi.tcp/
Running 30s test @ http://go.fcgi.tcp/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   514.57ms  119.80ms   1.21s    71.85%
    Req/Sec    97.18     22.56   263.00     79.59%
  287416 requests in 30.00s, 48.24MB read
  Socket errors: connect 0, read 0, write 0, timeout 661
Requests/sec:   9580.75
Transfer/sec:      1.61MB
Nginx + Go through FastCGI Unix Socket
# wrk -t100 -c5000 -d30s http://go.fcgi.unix/
Running 30s test @ http://go.fcgi.unix/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   425.64ms   80.53ms 925.03ms   76.88%
    Req/Sec   117.03     22.13   255.00     81.30%
  350162 requests in 30.00s, 58.77MB read
  Socket errors: connect 0, read 0, write 0, timeout 210
Requests/sec:  11670.72
Transfer/sec:      1.96MB

GOMAXPROCS = 8

Go standalone
# wrk -t100 -c5000 -d30s http://127.0.0.1:8080/
Running 30s test @ http://127.0.0.1:8080/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency    39.25ms    8.49ms  86.45ms   81.39%
    Req/Sec     1.29k   129.27     1.79k    69.23%
  3837995 requests in 29.89s, 644.19MB read
Requests/sec: 128402.88
Transfer/sec:     21.55MB
Nginx + Go through HTTP
# wrk -t100 -c5000 -d30s http://go.http/
Running 30s test @ http://go.http/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   336.77ms  297.88ms 632.52ms   60.16%
    Req/Sec     2.36k     2.99k   19.11k    84.83%
  2232068 requests in 29.98s, 374.64MB read
Requests/sec:  74442.91
Transfer/sec:     12.49MB
Nginx + Go through FastCGI TCP
# wrk -t100 -c5000 -d30s http://go.fcgi.tcp/
Running 30s test @ http://go.fcgi.tcp/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   217.69ms  121.22ms   1.80s    75.14%
    Req/Sec   263.09    102.78   629.00     62.54%
  721027 requests in 30.01s, 121.02MB read
  Socket errors: connect 0, read 0, write 176, timeout 1343
Requests/sec:  24026.50
Transfer/sec:      4.03MB
Nginx + Go through FastCGI Unix Socket
# wrk -t100 -c5000 -d30s http://go.fcgi.unix/
Running 30s test @ http://go.fcgi.unix/
  100 threads and 5000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency   694.32ms  332.27ms   1.79s    62.13%
    Req/Sec   646.86    669.65     6.11k    87.80%
  909836 requests in 30.00s, 152.71MB read
Requests/sec:  30324.77
Transfer/sec:      5.09MB

Conclusions

The first set of benchmarks was made with ab and some nginx settings was not very well optimized (gzip was enabled and it was not using keep-alive connections with the Go backend). After changing to wrk and following the suggestions to optimize nginx the results gone very different.

With GOMAXPROCS=1, the nginx overhead is not so big after all, but with GOMAXPROCS=8 the difference is huge. I may try another settings in the future but for now, If you need nginx features like virtual hosting, load balancing, caching, etc, use the HTTP proxy connection instead of FastCGI. Some folks said that Go's FastCGI is not well optimized and this may be the cause of the huge differences in the results presented here.

@khannedy
Copy link

great job!

@jamthief
Copy link

jamthief commented Sep 7, 2016

Great effort. Would be interesting to see the results when NGINX and Go and run on separate hardware than wrk.

@Donnie
Copy link

Donnie commented Jun 8, 2018

This is awesome work, and very enlightening. Thank you. Would be better if we can do this on a standard Digital Ocean droplet or Amazon EC2.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment