mikrotik full reset 4g lte modem if no ping

:if ( [/ping 8.8.8.8 count=5 size=64 interval=2s ] =0) do={
:log error "-----No ping";
/system routerboard usb power-reset duration=2;
:log error "----Reset USB Power"; 
/delay 30s
:log error "disable"; 
/interface disable lte1;
/delay 5s
:log error "enable"; 
/interface enable lte1;
}

# External network connection watchdog
#
# If device gets 10 unsuccessfull pings to 8.8.8.8, it will try to restart the
# LTE modem and its PPoe interface - multiple times (~26x), until the
# rebootThreshold is met. Then the device reboots completely (approximately after 1 hour).
#
# How to kill the routeros script/job?
# /system/script/job/print
# /system/script/job/remove <N>
#
# No not forget to automatically start the script after device boot:
# /system/schedule add name=script-watchdog on-event="/system/script/run \"watchdog-device-and-usb\"" start-time=startup interval=0 disabled=no

# Global do-while loop condition variable - it's possible to stop whole script by setting this variable to "true" in the console.
:global WatchdogStopScript false;

# USB-Reset duration time
:global powerResetTime "10s";

# If connection problems persist and the (pingCount % rebootThreshold)==0, the device reboots.
:global rebootThreshold 26;  # Approximately after one hour

# Threshold when the device tries to USB-reset the LTE modem and its PPoe interface.
:local pingThreshold 10;
:local pingCount 0;

# Name of PPoe LTE interface
:local pppInterface "ppp-lte";

# Ping address
#:local pingAddress "1.2.3.4";   # Just for testing
:local pingAddress "8.8.8.8";

# At first, wait until the device boots up and everything (especially LTE modem) will try to initialize
:log warning "Script: Running watchdog script - waiting on initial delay ...";
:delay 300s;

:do {
    # Every 30 seconds check the connection, reset or increment the pingCount if connection fails.
    :delay 30s;

    :if ([/ping count=1 address=$pingAddress size=64] = 0) do={
        :set pingCount ($pingCount + 1);
        :log warning "Script: Unable to ping the $pingAddress, incrementing the ping counter: $pingCount";
    } else={
        # Reset the ping counter
        :set pingCount 0;
        :log info "Script: Resetting the ping counter: $pingCount";
    }

    :if ($pingCount >= $pingThreshold) do={
        :log error "Script: Network failure detected. Resetting USB and PPoe interface ...";

        /interface disable $pppInterface;
        :delay 5s;

        /system routerboard usb power-reset duration=$powerResetTime;
        :delay $powerResetTime;
        :log warning "Script: USB Power reset complete.";

        # Wait for the LTE modem to boot up
        :delay 60s;

        /interface enable $pppInterface;

        # Wait for the PPoe interface to initialize
        :delay 120s;
        :log warning "Script: Testing if device got the network after USB reset";

        :if ([/ping address=$pingAddress count=1 size=64] = 0) do={
            :log warning "Script: Network still not available after USB/modem reset. Checking reboot threshold: [pingCount=$pingCount, rebootThreshold=$rebootThreshold]";

            :if (($pingCount % $rebootThreshold) = 0) do={
                :log warning "Script: Rebooting device due to prolonged network failure (reached the reboot threshold).";
                /system reboot;
            }
        } else={
            :log info "Network connectivity restored after USB reset. Resetting the ping counter.";
            :set pingCount 0;
        }
    }
} while=( !$WatchdogStopScript );