Boot log on SC-04D

Boot_log_on_SC04D

[Thermal] OK to boot
Initialize runtime thermal monitoring ...done!

-- OMAP 00004460 (version 04460e11) PPA release 1.6.1 Hash 30639809--
Device type: HS, DEBUG OFF
CPFROM HAL API support integrated
THERMAL support integrated: Run Time + Boot time
HDCP support integrated
-- PROD PPA RC3.2.3 --
Reset reason = 00030181
PRM_RSTST = 00000001
PPA freed 2992 bytes


Texas Instruments X-Loader 1.41 (Nov 16 2011 - 16:28:45)
Starting OS Bootloader from MMC/SD1 ...
EXCEPTION : CM_CLKMODE_DPLL_ABE = 0x7
EXCEPTION : CM_IDLEST_DPLL_ABE = 0x1
EXCEPTION : CM_CLKSEL_DPLL_ABE = 0x804018
EXCEPTION : CM_CLKMODE_DPLL_CORE = 0xf
EXCEPTION : CM_IDLEST_DPLL_CORE = 0x1
EXCEPTION : CM_CLKSEL_DPLL_CORE = 0x7d05
EXCEPTION : CM_CLKMODE_DPLL_PER = 0x107
EXCEPTION : CM_IDLEST_DPLL_PER = 0x1
EXCEPTION : CM_CLKSEL_DPLL_PER = 0x1400
EXCEPTION : CM_CLKMODE_DPLL_MPU = 0x117
EXCEPTION : CM_IDLEST_DPLL_MPU = 0x1
EXCEPTION : CM_CLKSEL_DPLL_MPU = 0x807d07
CFG_LOADADDR = 0xa0208000
1st instruct = 0xEA000007
[ __omap_twl6030_init_vbat_cfg :49]	 SA_PHOENIX_START_CONDITION = 0x2
[ __omap_twl6030_init_vbat_cfg :54]	 SA_PH_CFG_VBATLOWV = 0x80
[ __omap_twl6030_init_vbat_cfg :63]	 SA_PH_CFG_VBATLOWV = 0x80
[ __omap_twl6030_init_vbat_cfg :86]	 SA_BBSPOR_CFG = 0x78
ARM Cortex A9 GIC Distributor Init
	Number of Lines : 160
	Number of CPUs  : 2
	Number of LSPIs  : 31
	Implementer : 43b
	Revision : 0
	Variant : 2
	Product ID : 1

Secondary Bootloader v3.1 version.
Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
Board: tuna/ Version: PRIMEKK15/ Nov 16 2011 16:29:29

booting code=0x3f3f3f3f
load_param start block=49152, no.blocks=16384
[ omap_power_get_reset_source :47]	 PRM_RSTST : 0x1
[ omap_power_get_reboot_reason :69]	 Cold-Reset
[ omap_power_get_reboot_reason :104]	 Reboot-Mode : 0x1
[ omap_button_get_reboot_reason :255]	 detected key nValue = 0xa0000000[WRN] -   40 - __oamp_button_set_powerkey_mode/omap_button.c - Called!!!
[ __sbl_board_update_powerup_reason :503]	 nRebootModeTmp : 0x100000
[ __sbl_board_update_powerup_reason :506]	 Wake up by BUTTON
nps status=0x504d4f43
[ __sbl_board_hw_init_late :704]	 g_nRebootReason = 0x100000
[sbl_board_charger_init_post] : Succeed set model data : 0x78!!!!!
====== VCELL : 385375, SOC : 73, nType : 0 ======
[Charger] nScaledVCELL : 385375000, nDesriedSOC, : 68, nMaxSOC : 88, nMinSOC : 48
* FB base addr = 0xbea70000!
* PANEL_S6E8AA0_ID_READ : 0x12, 0x8e, 0x96.
[ omap_power_get_reset_source :47]	 PRM_RSTST : 0x1
message.command = 
message.status = 
message.recovery = 
Uncompressing Linux... done, booting the kernel.
<hit enter twice to activate fiq debugger>