Octoprint terminal output for G33 P0; G33 P1; and failure on G33 P2 - temperature messages squelched

2020-08-23-kossel-fsr-probe-failures.log

Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /dev/ttyACM0, baudrate 250000
Changing monitoring state from "Opening serial connection" to "Connecting"
Connected to: Serial<id=0x6ec1bc90, open=True>(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: echo:start
Recv:  External Reset
Send: N0 M110 N0*125
Recv: Marlin 2.0.6
Recv: 
Recv: echo: Last Updated: 2020-07-28 | Author: (hitjim)
Recv: echo:Compiled: Aug 23 2020
Recv: echo: Free Memory: 4015  PlannerBufferBytes: 1200
Recv: echo:Hardcoded Default Settings Loaded
Recv: echo:  G21    ; Units in mm (mm)
Recv: echo:  M149 C ; Units in Celsius
Recv: 
Recv: echo:; Filament settings: Disabled
Recv: echo:  M200 S0 D1.75
Recv: echo:; Steps per unit:
Recv: echo: M92 X100.00 Y100.00 Z100.00 E472.00
Recv: echo:; Maximum feedrates (units/s):
Recv: echo:  M203 X200.00 Y200.00 Z200.00 E50.00
Recv: echo:; Maximum Acceleration (units/s2):
Recv: echo:  M201 X9000.00 Y9000.00 Z9000.00 E10000.00
Recv: echo:; Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo:  M204 P3000.00 R3000.00 T3000.00
Recv: echo:; Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
Recv: echo:  M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z10.00 E5.00
Recv: echo:; Endstop adjustment:
Recv: echo:  M666 X0.00 Y-0.36 Z-1.48
Recv: echo:; Delta settings: L<diagonal rod> R<radius> H<height> S<segments per sec> XYZ<tower angle trim> ABC<rod trim>
Recv: echo:  M665 L288.00 R181.00 H273.48 S200.00 X0.00 Y0.00 Z0.00 A0.00 B0.00 C0.00
Recv: echo:; Material heatup parameters:
Recv: echo:  M145 S0 H185 F255
Recv: echo:  M145 S1 H240 F255
Recv: echo:; PID settings:
Recv: echo:  M301 P22.20 I1.08 D114.00
Recv: echo:; Z-Probe Offset (mm):
Recv: echo:  M851 X0 Y0 Z0.00
Recv: ok
Send: N0 M110 N0*125
Changing monitoring state from "Connecting" to "Operational"
Recv: echo:Unknown command: ""
Recv: ok
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin 2.0.6 (Aug 23 2020 21:46:33) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Kossel 250! EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Recv: Cap:SERIAL_XON_XOFF:0
Recv: Cap:BINARY_FILE_TRANSFER:0
Recv: Cap:EEPROM:0
Recv: Cap:VOLUMETRIC:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRESS:0
Recv: Cap:PRINT_JOB:1
Recv: Cap:AUTOLEVEL:0
Recv: Cap:RUNOUT:0
Recv: Cap:Z_PROBE:1
Recv: Cap:LEVELING_DATA:0
Recv: Cap:BUILD_PERCENT:0
Recv: Cap:SOFTWARE_POWER:1
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: Cap:PROMPT_SUPPORT:0
Recv: Cap:SDCARD:1
Recv: Cap:AUTOREPORT_SD_STATUS:0
Recv: Cap:LONG_FILENAME:0
Recv: Cap:THERMAL_PROTECTION:1
Recv: Cap:MOTION_MODES:0
Recv: Cap:ARCS:1
Recv: Cap:BABYSTEPPING:0
Recv: Cap:CHAMBER_TEMPERATURE:0
Recv: ok
Send: M21
Recv: echo:No SD card
Recv: ok
Send: M155 S2
Recv: ok
[...]
Send: M503
Recv: echo:  G21    ; Units in mm (mm)
Recv: echo:  M149 C ; Units in Celsius
Recv: 
Recv: echo:; Filament settings: Disabled
Recv: echo:  M200 S0 D1.75
Recv: echo:; Steps per unit:
Recv: echo: M92 X100.00 Y100.00 Z100.00 E472.00
Recv: echo:; Maximum feedrates (units/s):
Recv: echo:  M203 X200.00 Y200.00 Z200.00 E50.00
Recv: echo:; Maximum Acceleration (units/s2):
Recv: echo:  M201 X9000.00 Y9000.00 Z9000.00 E10000.00
Recv: echo:; Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo:  M204 P3000.00 R3000.00 T3000.00
Recv: echo:; Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
Recv: echo:  M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z10.00 E5.00
Recv: echo:; Endstop adjustment:
Recv: echo:  M666 X0.00 Y-0.36 Z-1.48
Recv: echo:; Delta settings: L<diagonal rod> R<radius> H<height> S<segments per sec> XYZ<tower angle trim> ABC<rod trim>
Recv: echo:  M665 L288.00 R181.00 H273.48 S200.00 X0.00 Y0.00 Z0.00 A0.00 B0.00 C0.00
Recv: echo:; Material heatup parameters:
Recv: echo:  M145 S0 H185 F255
Recv: echo:  M145 S1 H240 F255
Recv: echo:; PID settings:
Recv: echo:  M301 P22.20 I1.08 D114.00
Recv: echo:; Z-Probe Offset (mm):
Recv: echo:  M851 X0 Y0 Z0.00
Recv: ok
[...]
Send: G33 P0
Recv: G33 Auto Calibrate
Recv: Checking... AC
Recv: .Height:273.48
Recv: Calibration OK                                std dev:0.000
Recv: .Height:273.48
Recv: Save with M500 and/or copy to Configuration.h
[...]
Recv: echo:busy: processing
Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
[...]
Recv: echo:busy: processing
Recv: ok
Send: M113 S2
Recv: ok
[...]
Send: G33 P1
Recv: echo:Unknown command: ""
Recv: ok
[...]
Send: G33 P1
Recv: G33 Auto Calibrate
Recv: Checking... AC
Recv: .Height:273.48
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
Recv: Calibration OK                                std dev:0.000
Recv: .Height:274.21
Recv: Save with M500 and/or copy to Configuration.h
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
Recv: ok
[...]
Send: G33 P2
Recv: G33 Auto Calibrate
Recv: Checking... AC
Recv: .Height:274.21  Ex:+0.00  Ey:-0.36  Ez:-1.48  Radius:181.00
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
Recv: Iteration : 01                                std dev:0.241
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: echo:busy: processing
[...]
Recv: Error:Probing Failed
Changing monitoring state from "Operational" to "Error: Probing Failed"
Send: M112
Send: N2 M112*35
Send: N3 M104 T0 S0*34
Changing monitoring state from "Error: Probing Failed" to "Offline (Error: Probing Failed)"
Connection closed, closing down monitor