Skip to content

Instantly share code, notes, and snippets.

@hnyman
Created March 13, 2017 21:32
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save hnyman/5f4c9b1d325c1296b68f1a632b8db643 to your computer and use it in GitHub Desktop.
Save hnyman/5f4c9b1d325c1296b68f1a632b8db643 to your computer and use it in GitHub Desktop.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.14 (perus@ub1610) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3598-eb09d79c16) ) #0 SMP Mon Mar 13 20:49:39 2017
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 13 pages/cpu @dda09000 s20940 r8192 d24116 u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 479224K/491520K available (3728K kernel code, 239K rwdata, 1184K rodata, 236K init, 232K bss, 12296K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc05ac488 (3730 kB)
[ 0.000000] .init : 0xc06f5000 - 0xc0730000 ( 236 kB)
[ 0.000000] .data : 0xc0730000 - 0xc076be00 ( 240 kB)
[ 0.000000] .bss : 0xc076d000 - 0xc07a70a8 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000226] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000244] pid_max: default: 32768 minimum: 301
[ 0.000343] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000357] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001008] CPU: Testing write buffer coherency: ok
[ 0.001297] Setting up static identity map for 0x42208280 - 0x422082d8
[ 0.004645] Brought up 2 CPUs
[ 0.004662] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004672] CPU: All CPU(s) started in SVC mode.
[ 0.015923] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.016117] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016143] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.016223] pinctrl core: initialized pinctrl subsystem
[ 0.017524] NET: Registered protocol family 16
[ 0.017769] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041401] cpuidle: using governor ladder
[ 0.072417] cpuidle: using governor menu
[ 0.074475] qcom_rpm 108000.rpm: could not find pctldev for node /soc/pinmux@800000/i2c4_pinmux, deferring probe
[ 0.126321] usbcore: registered new interface driver usbfs
[ 0.126417] usbcore: registered new interface driver hub
[ 0.126502] usbcore: registered new device driver usb
[ 0.126564] pps_core: LinuxPPS API ver. 1 registered
[ 0.126574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.126609] PTP clock support registered
[ 0.128412] clocksource: Switched to clocksource dg_timer
[ 0.130291] NET: Registered protocol family 2
[ 0.130906] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.130953] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.131015] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.131070] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.131091] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.131278] NET: Registered protocol family 1
[ 0.132678] No memory allocated for crashlog
[ 0.133029] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.139453] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.139469] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.142497] io scheduler noop registered
[ 0.142515] io scheduler deadline registered (default)
[ 0.144223] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.144338] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.144424] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.144972] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.145014] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.145040] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.253283] qcom-pcie 1b500000.pci: link up
[ 0.255347] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.255371] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.255390] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.255406] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.255935] PCI: bus0: Fast back to back transfers disabled
[ 0.258030] PCI: bus1: Fast back to back transfers disabled
[ 0.258367] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.258392] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.258517] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.258541] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.259407] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.259510] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.259598] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.260127] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.260164] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.260184] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.370431] qcom-pcie 1b700000.pci: link up
[ 0.372456] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.372474] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.372489] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.372970] PCI: bus0: Fast back to back transfers disabled
[ 0.375065] PCI: bus1: Fast back to back transfers disabled
[ 0.375535] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.375559] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.375680] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.375700] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.379028] L2 @ QSB rate. Forcing new rate.
[ 0.379224] L2 @ 384000 KHz
[ 0.379401] CPU0 @ 800000 KHz
[ 0.379412] CPU1 @ QSB rate. Forcing new rate.
[ 0.379535] CPU1 @ 384000 KHz
[ 0.383571] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.384996] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.386358] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.387266] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.387349] msm_serial 16340000.serial: uartclk = 7372800
[ 0.387424] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 169, base_baud = 460800) is a MSM
[ 0.387460] msm_serial: console setup on port #0
[ 1.090340] console [ttyMSM0] enabled
[ 1.095086] msm_serial: driver initialized
[ 1.106710] loop: module loaded
[ 1.108746] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[ 1.108777] nand: Micron MT29F1G08ABBEAH4
[ 1.115256] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.119369] 10 ofpart partitions found on MTD device qcom_nand.0
[ 1.126630] Creating 10 MTD partitions on "qcom_nand.0":
[ 1.132876] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.143633] random: fast init done
[ 1.156977] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.165412] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.167807] 0x000001200000-0x000001340000 : "art"
[ 1.173045] 0x000001340000-0x000001480000 : "artbak"
[ 1.177824] 0x000001480000-0x000001680000 : "kernel"
[ 1.184146] 0x000001680000-0x000003480000 : "ubi"
[ 1.232317] 0x000003480000-0x000007900000 : "netgear"
[ 1.341142] 0x000007900000-0x000008000000 : "reserve"
[ 1.353643] 0x000001480000-0x000003480000 : "firmware"
[ 1.406548] no rootfs found after FIT image in "firmware"
[ 1.407848] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.413000] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00
[ 1.418086] m25p80: probe of spi32766.0 failed with error -2
[ 1.425903] libphy: GPIO Bitbanged MDIO: probed
[ 1.462513] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.420268] libphy: Fixed MDIO Bus: probed
[ 2.420304] libphy: mdio_driver_register: qca8k
[ 2.426322] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.427692] Ring mode enabled
[ 2.433000] DMA HW capability register supported[ 2.435852] Enhanced/Alternate descriptors
[ 2.441491] Enabled extended descriptors
[ 2.444452] RX Checksum Offload Engine supported
[ 2.448618] COE Type 2
[ 2.453384] TX Checksum insertion supported
[ 2.455561] Wake-Up On Lan supported
[ 2.460166] Enable RX Mitigation via HW Watchdog Timer
[ 2.466002] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.468669] Ring mode enabled
[ 2.473990] DMA HW capability register supported[ 2.476830] Enhanced/Alternate descriptors
[ 2.482471] Enabled extended descriptors
[ 2.485428] RX Checksum Offload Engine supported
[ 2.489687] COE Type 2
[ 2.494278] TX Checksum insertion supported
[ 2.496538] Wake-Up On Lan supported
[ 2.501119] Enable RX Mitigation via HW Watchdog Timer
[ 2.505861] i2c /dev entries driver
[ 2.510946] gcc-ipq806x 900000.clock-controller: tsens calibration failed
[ 2.514643] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.520183] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 2.527912] sdhci: Secure Digital Host Controller Interface driver
[ 2.532828] sdhci: Copyright(c) Pierre Ossman
[ 2.538984] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.545755] NET: Registered protocol family 10
[ 2.551538] NET: Registered protocol family 17
[ 2.553762] 8021q: 802.1Q VLAN Support v1.8
[ 2.557810] Registering SWP/SWPB emulation handler
[ 2.579763] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.594190] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.594720] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.598684] s2a: Bringing 0uV into 775000-775000uV
[ 2.603763] s2b: Bringing 0uV into 775000-775000uV
[ 2.611697] UBI: auto-attach mtd6[ 2.612558] ubi0: attaching mtd6
[ 2.786410] random: crng init done
[ 3.183431] ubi0: scanning is finished
[ 3.201352] ubi0: attached mtd6 (name "ubi", size 30 MiB)
[ 3.201393] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.205743] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.212624] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.219460] ubi0: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0
[ 3.226142] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.232488] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 97429811
[ 3.239530] ubi0: available PEBs: 0, total reserved PEBs: 240, PEBs reserved for bad PEB handling: 20
[ 3.248634] ubi0: background thread "ubi_bgt0d" started, PID 65
[ 3.258607] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.263371] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.269002] hctosys: unable to open rtc device (rtc0)
[ 3.275821] Speed bin: 0
[ 3.281086] PVS bin: 4
[ 3.285758] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
[ 3.301852] UBIFS error (ubi0:0 pid 1): ubifs_is_mapped: ubi_is_mapped failed for LEB 0, error -9
[ 3.301890] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.14 #0
[ 3.309698] Hardware name: Generic DT based system
[ 3.315461] [<c0215670>] (unwind_backtrace) from [<c0211f1c>] (show_stack+0x10/0x14)
[ 3.320299] [<c0211f1c>] (show_stack) from [<c0387844>] (dump_stack+0x7c/0x9c)
[ 3.328195] [<c0387844>] (dump_stack) from [<c0333040>] (ubifs_is_mapped+0x34/0x40)
[ 3.335225] [<c0333040>] (ubifs_is_mapped) from [<c0330cb4>] (ubifs_mount+0x75c/0x1408)
[ 3.342780] [<c0330cb4>] (ubifs_mount) from [<c02c50d8>] (mount_fs+0x10/0x94)
[ 3.350767] [<c02c50d8>] (mount_fs) from [<c02dd1c8>] (vfs_kern_mount+0x4c/0x104)
[ 3.358057] [<c02dd1c8>] (vfs_kern_mount) from [<c02e04d4>] (do_mount+0x800/0xab0)
[ 3.365522] [<c02e04d4>] (do_mount) from [<c02e09b4>] (SyS_mount+0x70/0x98)
[ 3.372991] [<c02e09b4>] (SyS_mount) from [<c06f633c>] (mount_root+0x28/0xe0)
[ 3.379844] [<c06f633c>] (mount_root) from [<c06f6518>] (prepare_namespace+0x124/0x178)
[ 3.387134] [<c06f6518>] (prepare_namespace) from [<c06f5e44>] (kernel_init_freeable+0x19c/0x1e8)
[ 3.394948] [<c06f5e44>] (kernel_init_freeable) from [<c05a75dc>] (kernel_init+0xc/0xf4)
[ 3.403976] [<c05a75dc>] (kernel_init) from [<c020ec78>] (ret_from_fork+0x14/0x3c)
[ 3.412460] blk_update_request: I/O error, dev ubiblock0_0, sector 0
[ 3.419595] SQUASHFS error: squashfs_read_data failed to read block 0x0
[ 3.426016] squashfs: SQUASHFS error: unable to read squashfs_super_block
[ 3.432443] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5
[ 3.439376] Please append a correct "root=" boot option; here are the available partitions:
[ 3.446777] 1f00 12800 mtdblock0 [ 3.455148] (driver?)
[ 3.460302] 1f01 5120 mtdblock1 [ 3.461522] (driver?)
[ 3.466643] 1f02 512 mtdblock2 [ 3.467864] (driver?)
[ 3.472987] 1f03 1280 mtdblock3 [ 3.474207] (driver?)
[ 3.479393] 1f04 1280 mtdblock4 [ 3.480551] (driver?)
[ 3.485672] 1f05 2048 mtdblock5 [ 3.486894] (driver?)
[ 3.492017] 1f06 30720 mtdblock6 [ 3.493238] (driver?)
[ 3.498360] 1f07 70144 mtdblock7 [ 3.499634] (driver?)
[ 3.504704] 1f08 7168 mtdblock8 [ 3.505925] (driver?)
[ 3.511048] 1f09 32768 mtdblock9 [ 3.512269] (driver?)
[ 3.517389] fe00 5952 ubiblock0_0 [ 3.518611] (driver?)
[ 3.523907] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)
[ 3.525147] CPU1: stopping
[ 3.533733] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.14 #0
[ 3.536248] Hardware name: Generic DT based system
[ 3.542094] [<c0215670>] (unwind_backtrace) from [<c0211f1c>] (show_stack+0x10/0x14)
[ 3.546951] [<c0211f1c>] (show_stack) from [<c0387844>] (dump_stack+0x7c/0x9c)
[ 3.554844] [<c0387844>] (dump_stack) from [<c02149b8>] (handle_IPI+0xcc/0x184)
[ 3.561874] [<c02149b8>] (handle_IPI) from [<c02093f8>] (gic_handle_irq+0x78/0x94)
[ 3.569085] [<c02093f8>] (gic_handle_irq) from [<c02129cc>] (__irq_svc+0x6c/0x90)
[ 3.576705] Exception stack(0xdd473f90 to 0xdd473fd8)
[ 3.584266] 3f80: 00000001 00000000 00000000 c021a300
[ 3.589317] 3fa0: 00000000 dd472000 c0732fe4 00000002 c072c9b8 00000000 dd473fe8 00000001
[ 3.597471] 3fc0: 00000001 dd473fe0 c020f510 c020f514 60000013 ffffffff
[ 3.605634] [<c02129cc>] (__irq_svc) from [<c020f514>] (arch_cpu_idle+0x2c/0x38)
[ 3.612052] [<c020f514>] (arch_cpu_idle) from [<c024ed68>] (cpu_startup_entry+0xe8/0x198)
[ 3.619686] [<c024ed68>] (cpu_startup_entry) from [<422094ac>] (0x422094ac)
[ 3.627746] Rebooting in 1 seconds..
U-Boot 2012.07 [local,local] (Sep 03 2015 - 17:33:28)
U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
...
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment