kernel 5.15 commit b2c507b

kernel log

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.15.72 (perus@ub2204) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r20513-a99707d14c) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Oct 10 19:28:23 2022
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000] percpu: Embedded 12 pages/cpu s16396 r8192 d24564 u49152
[    0.000000] pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
[    0.000000] Kernel command line: 
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 473140K/491520K available (7220K kernel code, 615K rwdata, 1756K rodata, 1024K init, 236K bss, 18380K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000024] Switching to timer-based delay loop, resolution 160ns
[    0.000349] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000385] pid_max: default: 32768 minimum: 301
[    0.000650] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000681] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001822] CPU: Testing write buffer coherency: ok
[    0.002154] qcom_scm: convention: smc legacy
[    0.003454] Setting up static identity map for 0x42300000 - 0x42300060
[    0.003646] rcu: Hierarchical SRCU implementation.
[    0.003982] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.004243] smp: Bringing up secondary CPUs ...
[    0.006231] smp: Brought up 1 node, 2 CPUs
[    0.006264] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.006283] CPU: All CPU(s) started in SVC mode.
[    0.017175] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.017335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017372] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.017535] pinctrl core: initialized pinctrl subsystem
[    0.019312] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.019647] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.021124] thermal_sys: Registered thermal governor 'step_wise'
[    0.023135] cpuidle: using governor ladder
[    0.023214] cpuidle: using governor menu
[    0.041925] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[    0.074861] s1a: Bringing 0uV into 1050000-1050000uV
[    0.075110] s1a: supplied by regulator-dummy
[    0.075279] s1b: Bringing 0uV into 1050000-1050000uV
[    0.075483] s1b: supplied by regulator-dummy
[    0.075632] s2a: Bringing 0uV into 775000-775000uV
[    0.075840] s2a: supplied by regulator-dummy
[    0.075990] s2b: Bringing 0uV into 775000-775000uV
[    0.076199] s2b: supplied by regulator-dummy
[    0.076765] usbcore: registered new interface driver usbfs
[    0.076837] usbcore: registered new interface driver hub
[    0.076902] usbcore: registered new device driver usb
[    0.076962] pps_core: LinuxPPS API ver. 1 registered
[    0.076977] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.077013] PTP clock support registered
[    0.079065] clocksource: Switched to clocksource dg_timer
[    0.080041] NET: Registered PF_INET protocol family
[    0.080239] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.081019] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.081060] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.081089] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.081131] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.081191] TCP: Hash tables configured (established 4096 bind 4096)
[    0.081276] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.081317] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.081569] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.081624] PCI: CLS 0 bytes, default 64
[    0.082519] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.088139] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.088161] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.247664] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
[    0.247961] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
[    0.248101] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
[    0.248427] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[    0.248490] qcom-pcie 1b500000.pci: Parsing ranges property...
[    0.248544] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x000fe00000
[    0.248600] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000
[    0.372201] qcom-pcie 1b500000.pci: iATU unroll: disabled
[    0.372233] qcom-pcie 1b500000.pci: Detected iATU regions: 8 outbound, 8 inbound
[    0.474945] qcom-pcie 1b500000.pci: Link up
[    0.475147] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.475177] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.475211] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xfe00000-0xfe0ffff])
[    0.475240] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.475268] pci_bus 0000:00: scanning bus
[    0.475333] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.475501] pci 0000:00:00.0: supports D1
[    0.475529] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.475559] pci 0000:00:00.0: PME# disabled
[    0.480455] pci_bus 0000:00: fixups for bus
[    0.480486] PCI: bus0: Fast back to back transfers disabled
[    0.480513] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.480698] pci_bus 0000:01: scanning bus
[    0.480925] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[    0.481126] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.481978] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.482029] pci 0000:01:00.0: PME# disabled
[    0.486944] pci_bus 0000:01: fixups for bus
[    0.487006] PCI: bus1: Fast back to back transfers disabled
[    0.487033] pci_bus 0000:01: bus scan returning with max=01
[    0.487062] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.487091] pci_bus 0000:00: bus scan returning with max=ff
[    0.487128] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.487166] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.487278] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.487312] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.487554] pcieport 0000:00:00.0: assign IRQ: got 43
[    0.487688] qcom-pcie 1b500000.pci: msi#0 address_hi 0x0 address_lo 0x4376c698
[    0.488415] pcieport 0000:00:00.0: AER: enabled with IRQ 44
[    0.488543] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[    0.488569] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[    0.488591] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[    0.488611] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10010)
[    0.488632] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
[    0.488652] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
[    0.488674] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[    0.488695] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[    0.488715] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x8100800)
[    0.488736] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[    0.488758] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
[    0.488778] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
[    0.488798] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
[    0.488820] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
[    0.488841] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
[    0.488861] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x3012b)
[    0.489813] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
[    0.490097] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
[    0.490228] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
[    0.490556] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[    0.490618] qcom-pcie 1b700000.pci: Parsing ranges property...
[    0.490669] qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0031e00000
[    0.490724] qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000
[    0.611779] qcom-pcie 1b700000.pci: iATU unroll: disabled
[    0.611810] qcom-pcie 1b700000.pci: Detected iATU regions: 8 outbound, 8 inbound
[    0.714525] qcom-pcie 1b700000.pci: Link up
[    0.714706] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.714735] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.714768] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x31e00000-0x31e0ffff])
[    0.714797] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.714825] pci_bus 0001:00: scanning bus
[    0.714885] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.715041] pci 0001:00:00.0: supports D1
[    0.715065] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.715092] pci 0001:00:00.0: PME# disabled
[    0.719954] pci_bus 0001:00: fixups for bus
[    0.719987] PCI: bus0: Fast back to back transfers disabled
[    0.720014] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.720189] pci_bus 0001:01: scanning bus
[    0.720434] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[    0.720646] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.721567] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.721621] pci 0001:01:00.0: PME# disabled
[    0.721875] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.726582] pci_bus 0001:01: fixups for bus
[    0.726650] PCI: bus1: Fast back to back transfers disabled
[    0.726674] pci_bus 0001:01: bus scan returning with max=01
[    0.726700] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.726727] pci_bus 0001:00: bus scan returning with max=ff
[    0.726761] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.726801] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.726920] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.726952] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.727191] pcieport 0001:00:00.0: assign IRQ: got 45
[    0.727322] qcom-pcie 1b700000.pci: msi#0 address_hi 0x0 address_lo 0x4376d698
[    0.727985] pcieport 0001:00:00.0: AER: enabled with IRQ 46
[    0.728115] pcieport 0001:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[    0.728141] pcieport 0001:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[    0.728163] pcieport 0001:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[    0.728184] pcieport 0001:00:00.0: saving config space at offset 0xc (reading 0x10010)
[    0.728205] pcieport 0001:00:00.0: saving config space at offset 0x10 (reading 0x0)
[    0.728225] pcieport 0001:00:00.0: saving config space at offset 0x14 (reading 0x0)
[    0.728246] pcieport 0001:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[    0.728267] pcieport 0001:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[    0.728287] pcieport 0001:00:00.0: saving config space at offset 0x20 (reading 0x2e102e00)
[    0.728308] pcieport 0001:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[    0.728328] pcieport 0001:00:00.0: saving config space at offset 0x28 (reading 0x0)
[    0.728348] pcieport 0001:00:00.0: saving config space at offset 0x2c (reading 0x0)
[    0.728369] pcieport 0001:00:00.0: saving config space at offset 0x30 (reading 0x0)
[    0.728389] pcieport 0001:00:00.0: saving config space at offset 0x34 (reading 0x40)
[    0.728410] pcieport 0001:00:00.0: saving config space at offset 0x38 (reading 0x0)
[    0.728431] pcieport 0001:00:00.0: saving config space at offset 0x3c (reading 0x3012d)
[    0.732627] krait-cc soc:clock-controller: CPU0 @ 800000 KHz
[    0.732666] krait-cc soc:clock-controller: CPU1 @ PXO rate. Forcing new rate.
[    0.732995] krait-cc soc:clock-controller: CPU1 @ 384000 KHz
[    0.733023] krait-cc soc:clock-controller: L2 @ PXO rate. Forcing new rate.
[    0.733255] krait-cc soc:clock-controller: L2 @ 384000 KHz
[    0.738333] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.739973] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.740886] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.740953] msm_serial 16340000.serial: uartclk = 7372800
[    0.741040] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 47, base_baud = 460800) is a MSM
[    0.741094] msm_serial: console setup on port #0
[    1.658763] printk: console [ttyMSM0] enabled
[    1.664076] msm_serial: driver initialized
[    1.674244] loop: module loaded
[    1.675898] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[    1.676202] nand: Micron MT29F1G08ABBEAH4
[    1.682913] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.686820] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[    1.694316] OF: Bad cell count for /soc/nand-controller@1ac00000/nand@0/partitions
[    1.701152] OF: Bad cell count for /soc/nand-controller@1ac00000/nand@0/partitions
[    1.709417] Creating 8 MTD partitions on "qcom_nand.0":
[    1.716049] 0x000000000000-0x000000c80000 : "qcadata"
[    1.741246] 0x000000c80000-0x000001180000 : "APPSBL"
[    1.749772] 0x000001180000-0x000001200000 : "APPSBLENV"
[    1.751192] 0x000001200000-0x000001340000 : "art"
[    1.756377] 0x000001340000-0x000001480000 : "artbak"
[    1.761173] 0x000001480000-0x000001880000 : "kernel"
[    1.770526] 0x000001880000-0x000007900000 : "ubi"
[    1.921261] 0x000007900000-0x000008000000 : "reserve"
[    1.955958] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[    2.739534] ar8327: qca,phy-rgmii-en is not specified
[    2.740825] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[    2.743580] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[    2.751673] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.757741] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    2.763729] ipq806x-gmac-dwmac 37200000.ethernet: 	DWMAC1000
[    2.771188] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.776913] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.784701] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.792604] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.798350] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.805800] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.812567] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.820127] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.827083] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.835531] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[    2.841999] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[    2.849253] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.855797] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    2.862015] ipq806x-gmac-dwmac 37400000.ethernet: 	DWMAC1000
[    2.869434] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.875175] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.882992] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.890889] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.896615] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.904068] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    2.910848] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    2.918315] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    2.925416] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.933851] i2c_dev: i2c /dev entries driver
[    2.944622] sdhci: Secure Digital Host Controller Interface driver
[    2.944659] sdhci: Copyright(c) Pierre Ossman
[    2.950521] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.963182] NET: Registered PF_INET6 protocol family
[    2.965393] Segment Routing with IPv6
[    2.967270] In-situ OAM (IOAM) with IPv6
[    2.970995] NET: Registered PF_PACKET protocol family
[    2.975073] 8021q: 802.1Q VLAN Support v1.8
[    2.979854] Registering SWP/SWPB emulation handler
[    3.019406] thermal thermal_zone0: failed to read out thermal zone (-110)
[    3.031697] UBI: auto-attach mtd6
[    3.031737] ubi0: attaching mtd6
[    3.162601] random: crng init done
[    3.787371] ubi0: scanning is finished
[    3.797281] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[    3.797305] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.801714] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.808423] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.815331] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[    3.822117] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    3.828302] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1664128758
[    3.835387] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[    3.844888] ubi0: background thread "ubi_bgt0d" started, PID 94
[    3.854442] block ubiblock0_0: created from ubi0:0(rootfs)
[    3.859544] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    3.870345] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    3.871018] Freeing unused kernel image (initmem) memory: 1024K
[    3.899724] Run /sbin/init as init process
[    3.899748]   with arguments:
[    3.899754]     /sbin/init
[    3.899760]   with environment:
[    3.899765]     HOME=/
[    3.899770]     TERM=linux
[    4.198456] init: Console is alive
[    4.198604] init: - watchdog -
[    4.200896] init: Watchdog has previously reset the system
[    5.184341] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.255300] pstore: Using crash dump compression: deflate
[    5.255330] pstore: Registered ramoops as persistent store backend
[    5.259767] ramoops: using 0x40000@0x42100000, ecc: 0
[    5.266997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.274118] SCSI subsystem initialized
[    5.280951] libata version 3.00 loaded.
[    5.282859] ahci 29000000.sata: supply ahci not found, using dummy regulator
[    5.282985] ahci 29000000.sata: supply phy not found, using dummy regulator
[    5.289074] ahci 29000000.sata: supply target not found, using dummy regulator
[    5.296102] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[    5.303062] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    5.308417] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
[    5.318496] scsi host0: ahci
[    5.325546] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 32
[    5.662015] ata1: SATA link down (SStatus 0 SControl 300)
[    5.668623] ehci-fsl: Freescale EHCI Host controller driver
[    5.670891] ehci-platform: EHCI generic platform driver
[    5.685319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.685878] ohci-platform: OHCI generic platform driver
[    5.833871] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.833919] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    5.838397] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000002002010010
[    5.845920] xhci-hcd xhci-hcd.0.auto: irq 51, io mem 0x10000000
[    5.855421] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.861157] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    5.866642] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    5.874752] hub 1-0:1.0: USB hub found
[    5.880938] hub 1-0:1.0: 1 port detected
[    5.884866] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.888905] hub 2-0:1.0: USB hub found
[    5.897311] hub 2-0:1.0: 1 port detected
[    5.900542] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.904318] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    5.909812] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000002002010010
[    5.917183] xhci-hcd xhci-hcd.1.auto: irq 52, io mem 0x11000000
[    5.926746] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.932512] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    5.937994] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    5.945972] hub 3-0:1.0: USB hub found
[    5.952221] hub 3-0:1.0: 1 port detected
[    5.956102] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.960463] hub 4-0:1.0: USB hub found
[    5.968044] hub 4-0:1.0: 1 port detected
[    5.974656] usbcore: registered new interface driver usb-storage
[    5.975825] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.986716] init: - preinit -
[    7.985754] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[    7.987093] dwmac1000: Master AXI performs any burst length
[    7.993016] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[    8.008242] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    8.008457] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    8.032417] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[    8.033008] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    8.040352] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   13.321615] mount_root: loading kmods from internal overlay
[   13.354240] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   13.357363] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   13.475250] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   13.475762] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 212
[   13.624768] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   13.624797] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   13.631633] UBIFS (ubi0:1): FS size: 84566016 bytes (80 MiB, 666 LEBs), max 677 LEBs, journal size 4190208 bytes (3 MiB, 33 LEBs)
[   13.641531] UBIFS (ubi0:1): reserved for root: 3994261 bytes (3900 KiB)
[   13.653151] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID B93BBF3C-E1EE-4518-B8DD-AF5E1CCFE63E, small LPT model
[   13.679568] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   13.679694] block: unable to load configuration (fstab: Entry not found)
[   13.685388] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   13.692441] block: unable to load configuration (fstab: Entry not found)
[   13.698662] block: attempting to load /etc/config/fstab
[   13.773498] block: extroot: not configured
[   13.790220] UBIFS (ubi0:1): un-mount UBI device 0
[   13.791504] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[   13.796914] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   13.809511] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 213
[   13.913528] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   13.913559] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   13.920416] UBIFS (ubi0:1): FS size: 84566016 bytes (80 MiB, 666 LEBs), max 677 LEBs, journal size 4190208 bytes (3 MiB, 33 LEBs)
[   13.930289] UBIFS (ubi0:1): reserved for root: 3994261 bytes (3900 KiB)
[   13.941938] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID B93BBF3C-E1EE-4518-B8DD-AF5E1CCFE63E, small LPT model
[   13.982984] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   13.983110] block: unable to load configuration (fstab: Entry not found)
[   13.988811] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   13.995938] block: unable to load configuration (fstab: Entry not found)
[   14.002259] block: attempting to load /etc/config/fstab
[   14.009032] block: extroot: not configured
[   14.014972] mount_root: overlay filesystem has not been fully initialized yet
[   14.018621] mount_root: switching to ubifs overlay
[   18.627282] urandom-seed: Seed file not found (/etc/urandom.seed)
[   18.700573] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[   18.748491] procd: - early -
[   18.748811] procd: - watchdog -
[   18.750915] procd: Watchdog has previously reset the system
[   19.293332] procd: - watchdog -
[   19.293448] procd: Watchdog has previously reset the system
[   19.295600] procd: - ubus -
[   19.367494] procd: - init -
[   19.968071] urngd: v1.0.2 started.
[   20.028362] kmodloader: loading kernel modules from /etc/modules.d/*
[   20.103117] Key type dns_resolver registered
[   20.112758] Key type cifs.idmap registered
[   20.117742] tun: Universal TUN/TAP device driver, 1.6
[   20.120932] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   20.124707] gre: GRE over IPv4 demultiplexor driver
[   20.128298] ip_gre: GRE over IPv4 tunneling driver
[   20.162765] GACT probability on
[   20.163363] Mirror/redirect action on
[   20.168691] u32 classifier
[   20.168713]     input device check on
[   20.171226]     Actions configured
[   20.181660] fuse: init (API version 7.34)
[   20.190471] usbcore: registered new interface driver chaoskey
[   20.190845] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[   20.195194] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[   20.242035] xt_time: kernel timezone is -0000
[   20.306900] PPP generic driver version 2.4.2
[   20.307499] PPP MPPE Compression module registered
[   20.311056] NET: Registered PF_PPPOX protocol family
[   20.315539] PPTP driver version 0.8.5
[   20.323129] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   20.323519] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   20.346114] ath10k_pci 0000:01:00.0: assign IRQ: got 43
[   20.346140] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
[   20.346672] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   20.353105] ath10k_pci 0000:01:00.0: enabling bus mastering
[   20.353463] qcom-pcie 1b500000.pci: msi#1 address_hi 0x0 address_lo 0x4376c698
[   20.353581] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   21.368093] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[   21.368139] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   21.378784] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
[   23.714753] ath10k_pci 0000:01:00.0: Loading BDF type 0
[   23.716570] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 826c8c57
[   27.291186] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   27.291224] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   27.373189] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   27.374035] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
[   27.663005] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[   27.761123] ath: EEPROM regdomain: 0x0
[   27.761153] ath: EEPROM indicates default country code should be used
[   27.761168] ath: doing EEPROM country->regdmn map search
[   27.761188] ath: country maps to regdmn code: 0x3a
[   27.761207] ath: Country alpha2 being used: US
[   27.761224] ath: Regpair used: 0x3a
[   27.767431] ath10k_pci 0001:01:00.0: assign IRQ: got 45
[   27.767485] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
[   27.769671] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   27.774402] ath10k_pci 0001:01:00.0: enabling bus mastering
[   27.775050] qcom-pcie 1b700000.pci: msi#1 address_hi 0x0 address_lo 0x4376d698
[   27.775260] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   28.717748] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[   28.717806] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   28.729462] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
[   31.057055] ath10k_pci 0001:01:00.0: Loading BDF type 0
[   31.057723] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 826c8c57
[   34.618344] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   34.618382] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   34.702444] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   34.703315] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
[   34.998073] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[   35.091304] ath: EEPROM regdomain: 0x0
[   35.091334] ath: EEPROM indicates default country code should be used
[   35.091349] ath: doing EEPROM country->regdmn map search
[   35.091372] ath: country maps to regdmn code: 0x3a
[   35.091391] ath: Country alpha2 being used: US
[   35.091406] ath: Regpair used: 0x3a
[   35.106164] kmodloader: done loading kernel modules from /etc/modules.d/*
[   43.116778] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   43.117424] dwmac1000: Master AXI performs any burst length
[   43.124029] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[   43.139250] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   43.139446] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   43.147113] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[   43.154161] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   43.163220] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   43.175229] br-lan: port 1(eth1.1) entered blocking state
[   43.177482] br-lan: port 1(eth1.1) entered disabled state
[   43.183308] device eth1.1 entered promiscuous mode
[   43.188419] device eth1 entered promiscuous mode
[   43.200180] br-lan: port 1(eth1.1) entered blocking state
[   43.200218] br-lan: port 1(eth1.1) entered forwarding state
[   43.223688] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   43.224311] dwmac1000: Master AXI performs any burst length
[   43.230933] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[   43.246158] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   43.246302] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   43.279133] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[   43.279688] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   43.287140] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   44.169460] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   44.182599] ath: EEPROM regdomain: 0x80f6
[   44.182614] ath: EEPROM indicates we should expect a country code
[   44.182621] ath: doing EEPROM country->regdmn map search
[   44.182626] ath: country maps to regdmn code: 0x37
[   44.182631] ath: Country alpha2 being used: FI
[   44.182635] ath: Regpair used: 0x37
[   44.182640] ath: regdomain 0x80f6 dynamically updated by user
[   44.182663] ath: EEPROM regdomain: 0x80f6
[   44.182667] ath: EEPROM indicates we should expect a country code
[   44.182671] ath: doing EEPROM country->regdmn map search
[   44.182675] ath: country maps to regdmn code: 0x37
[   44.182680] ath: Country alpha2 being used: FI
[   44.182683] ath: Regpair used: 0x37
[   44.182688] ath: regdomain 0x80f6 dynamically updated by user
[   51.719397] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   51.719436] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   51.803357] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   51.804219] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
[   52.193796] ath10k_pci 0001:01:00.0: rts threshold -1
[   52.194021] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[   52.207874] br-lan: port 2(wlan1) entered blocking state
[   52.208778] br-lan: port 2(wlan1) entered disabled state
[   52.214620] device wlan1 entered promiscuous mode
[   52.263431] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   52.542846] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.543001] br-lan: port 2(wlan1) entered blocking state
[   52.548278] br-lan: port 2(wlan1) entered forwarding state
[   59.041801] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   59.041925] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   59.123853] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   59.124679] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
[   59.506911] ath10k_pci 0000:01:00.0: rts threshold -1
[   59.507338] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[   59.515208] br-lan: port 3(wlan0) entered blocking state
[   59.521947] br-lan: port 3(wlan0) entered disabled state
[   59.527540] device wlan0 entered promiscuous mode
[  120.810844] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
[  120.853721] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  120.853875] br-lan: port 3(wlan0) entered blocking state
[  120.859148] br-lan: port 3(wlan0) entered forwarding state
[ 6688.924494] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats