Skip to content

Instantly share code, notes, and snippets.

@holachek
Created August 9, 2012 14:53
Show Gist options
  • Save holachek/3304890 to your computer and use it in GitHub Desktop.
Save holachek/3304890 to your computer and use it in GitHub Desktop.
AVR Tutorial Makefile
# Name: Makefile
# Author: <insert your name here>
# Copyright: <insert your copyright message here>
# License: <insert your license reference here>
# DEVICE ....... The AVR device you compile for
# CLOCK ........ Target AVR clock rate in Hertz
# OBJECTS ...... The object files created from your source files. This list is
# usually the same as the list of source files with suffix ".o".
# PROGRAMMER ... Options to avrdude which define the hardware you use for
# uploading to the AVR and the interface where this hardware
# is connected.
# FUSES ........ Parameters for avrdude to flash the fuses appropriately.
DEVICE = attiny2313
CLOCK = 8000000
PROGRAMMER = -c arduino -P /dev/tty.usb* -b 19200
OBJECTS = main.o
FUSES = -U lfuse:w:0x64:m -U hfuse:w:0xdd:m -U efuse:w:0xff:m
######################################################################
######################################################################
# Tune the lines below only if you know what you are doing:
AVRDUDE = avrdude $(PROGRAMMER) -p $(DEVICE)
COMPILE = avr-gcc -Wall -Os -DF_CPU=$(CLOCK) -mmcu=$(DEVICE)
# symbolic targets:
all: main.hex
.c.o:
$(COMPILE) -c $< -o $@
.S.o:
$(COMPILE) -x assembler-with-cpp -c $< -o $@
# "-x assembler-with-cpp" should not be necessary since this is the default
# file type for the .S (with capital S) extension. However, upper case
# characters are not always preserved on Windows. To ensure WinAVR
# compatibility define the file type manually.
.c.s:
$(COMPILE) -S $< -o $@
flash: all
$(AVRDUDE) -U flash:w:main.hex:i
fuse:
$(AVRDUDE) $(FUSES)
install: flash fuse
# if you use a bootloader, change the command below appropriately:
load: all
bootloadHID main.hex
clean:
rm -f main.hex main.elf $(OBJECTS)
# file targets:
main.elf: $(OBJECTS)
$(COMPILE) -o main.elf $(OBJECTS)
main.hex: main.elf
rm -f main.hex
avr-objcopy -j .text -j .data -O ihex main.elf main.hex
# If you have an EEPROM section, you must also create a hex file for the
# EEPROM and add it to the "flash" target.
# Targets for code debugging and analysis:
disasm: main.elf
avr-objdump -d main.elf
cpp:
$(COMPILE) -E main.c
@Klaus-Valse
Copy link

Thank you for great tutorial. It helped me getting started, which is kind of the hardest thing. Anyway, I have a question:
Unfortunately I don't really know how makefiles work and I can barely edit or customize them. Now I split my code into multiple files, that I included in main.c. What do I have to modify in the makefile so that the compiler knows, what to compile? I could not get it to work. It's probably very easy and maybe you can help me out. This would be great.
Kind regards, Klaus.

@LURIDENAS
Copy link

Thanks for the tutorial.

@abhayraw1
Copy link

Can you drop the link to your tutorial here?

@lazicdanilo
Copy link

Can you drop the link to your tutorial here?

I'm pretty sure this is the tutorial.
https://www.youtube.com/watch?v=_ZL-YNOH_jA

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment