Created
August 23, 2023 18:38
-
-
Save huizebruin/99ce634f386eb82c9420f7f2b636148b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
uart: | |
id: uart_ld2410 | |
tx_pin: 1 | |
rx_pin: 3 | |
baud_rate: 256000 | |
parity: NONE | |
stop_bits: 1 | |
ld2410: | |
uart_id: uart_ld2410 | |
throttle: 1000ms | |
sensor: | |
- platform: ld2410 | |
light: | |
name: light | |
moving_distance: | |
name : Moving Distance | |
still_distance: | |
name: Still Distance | |
moving_energy: | |
name: Move Energy | |
still_energy: | |
name: Still Energy | |
detection_distance: | |
name: Detection Distance | |
g0: | |
move_energy: | |
name: g0 move energy | |
still_energy: | |
name: g0 still energy | |
g1: | |
move_energy: | |
name: g1 move energy | |
still_energy: | |
name: g1 still energy | |
g2: | |
move_energy: | |
name: g2 move energy | |
still_energy: | |
name: g2 still energy | |
g3: | |
move_energy: | |
name: g3 move energy | |
still_energy: | |
name: g3 still energy | |
g4: | |
move_energy: | |
name: g4 move energy | |
still_energy: | |
name: g4 still energy | |
g5: | |
move_energy: | |
name: g5 move energy | |
still_energy: | |
name: g5 still energy | |
g6: | |
move_energy: | |
name: g6 move energy | |
still_energy: | |
name: g6 still energy | |
g7: | |
move_energy: | |
name: g7 move energy | |
still_energy: | |
name: g7 still energy | |
g8: | |
move_energy: | |
name: g8 move energy | |
still_energy: | |
name: g8 still energy | |
text_sensor: | |
- platform: template | |
name: " Versie" | |
icon: "mdi:label-outline" | |
update_interval: 12h | |
lambda: |- | |
return {"${vdate}"}; | |
- platform: wifi_info | |
ip_address: | |
name: IP-adres | |
icon: mdi:ip-network | |
ssid: | |
name: Netwerk | |
icon: mdi:access-point-network | |
mac_address: | |
name: Mac-adres | |
icon: mdi:folder-key-network-outline | |
- platform: ld2410 | |
version: | |
name: "firmware version" | |
mac_address: | |
name: "mac address" | |
binary_sensor: | |
- platform: ld2410 | |
has_target: | |
name: Presence | |
has_moving_target: | |
name: Moving Target | |
has_still_target: | |
name: Still Target | |
out_pin_presence_status: | |
name: out pin presence status | |
- platform: gpio | |
pin: GPIO01 | |
name: gpio out pin presence | |
device_class: presence | |
select: | |
- platform: ld2410 | |
distance_resolution: | |
name: "distance resolution" | |
baud_rate: | |
name: "baud rate" | |
light_function: | |
name: light function | |
out_pin_level: | |
name: out pin level | |
switch: | |
- platform: ld2410 | |
engineering_mode: | |
name: "engineering mode" | |
bluetooth: | |
name: "control bluetooth" | |
number: | |
- platform: ld2410 | |
timeout: | |
name: timeout | |
light_threshold: | |
name: light threshold | |
max_move_distance_gate: | |
name: max move distance gate | |
max_still_distance_gate: | |
name: max still distance gate | |
g0: | |
move_threshold: | |
name: g0 move threshold | |
still_threshold: | |
name: g0 still threshold | |
g1: | |
move_threshold: | |
name: g1 move threshold | |
still_threshold: | |
name: g1 still threshold | |
g2: | |
move_threshold: | |
name: g2 move threshold | |
still_threshold: | |
name: g2 still threshold | |
g3: | |
move_threshold: | |
name: g3 move threshold | |
still_threshold: | |
name: g3 still threshold | |
g4: | |
move_threshold: | |
name: g4 move threshold | |
still_threshold: | |
name: g4 still threshold | |
g5: | |
move_threshold: | |
name: g5 move threshold | |
still_threshold: | |
name: g5 still threshold | |
g6: | |
move_threshold: | |
name: g6 move threshold | |
still_threshold: | |
name: g6 still threshold | |
g7: | |
move_threshold: | |
name: g7 move threshold | |
still_threshold: | |
name: g7 still threshold | |
g8: | |
move_threshold: | |
name: g8 move threshold | |
still_threshold: | |
name: g8 still threshold |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment