Skip to content

Instantly share code, notes, and snippets.

@hvraven
Created December 30, 2017 23:22
Show Gist options
  • Save hvraven/8259f3597392b67dd4e5f580894f9c80 to your computer and use it in GitHub Desktop.
Save hvraven/8259f3597392b67dd4e5f580894f9c80 to your computer and use it in GitHub Desktop.
Xorg.log
[ 428.916]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 428.916] X Protocol Version 11, Revision 0
[ 428.916] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[ 428.916] Current Operating System: Linux raspberrypi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l
[ 428.916] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=64c71fa2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 428.917] Build Date: 18 October 2017 04:55:30PM
[ 428.917] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[ 428.917] Current version of pixman: 0.34.0
[ 428.917] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 428.917] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 428.917] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 30 15:26:46 2017
[ 428.918] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 428.919] (==) No Layout section. Using the first Screen section.
[ 428.919] (==) No screen section available. Using defaults.
[ 428.919] (**) |-->Screen "Default Screen Section" (0)
[ 428.919] (**) | |-->Monitor "<default monitor>"
[ 428.920] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 428.920] (**) | |-->Device "Allwinner A10/A13 FBDEV"
[ 428.921] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 428.921] (==) Automatically adding devices
[ 428.921] (==) Automatically enabling devices
[ 428.921] (==) Automatically adding GPU devices
[ 428.921] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 428.921] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 428.921] Entry deleted from font path.
[ 428.921] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 428.921] Entry deleted from font path.
[ 428.921] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 428.921] Entry deleted from font path.
[ 428.921] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 428.921] Entry deleted from font path.
[ 428.921] (==) FontPath set to:
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 428.921] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 428.921] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 428.922] (II) Loader magic: 0x1fbf40
[ 428.922] (II) Module ABI versions:
[ 428.922] X.Org ANSI C Emulation: 0.4
[ 428.922] X.Org Video Driver: 23.0
[ 428.922] X.Org XInput driver : 24.1
[ 428.922] X.Org Server Extension : 10.0
[ 428.925] (--) using VT number 2
[ 428.925] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 428.926] (II) no primary bus or device found
[ 428.926] (II) LoadModule: "glx"
[ 428.927] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 428.935] (II) Module glx: vendor="X.Org Foundation"
[ 428.935] compiled for 1.19.2, module version = 1.0.0
[ 428.935] ABI class: X.Org Server Extension, version 10.0
[ 428.935] (II) LoadModule: "fbturbo"
[ 428.936] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[ 428.936] (II) Module fbturbo: vendor="X.Org Foundation"
[ 428.936] compiled for 1.19.2, module version = 0.5.1
[ 428.936] Module class: X.Org Video Driver
[ 428.936] ABI class: X.Org Video Driver, version 23.0
[ 428.936] (II) FBTURBO: driver for framebuffer: fbturbo
[ 428.959] (WW) Falling back to old probe method for fbturbo
[ 428.959] (II) Loading sub module "fbdevhw"
[ 428.959] (II) LoadModule: "fbdevhw"
[ 428.960] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 428.960] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 428.960] compiled for 1.19.2, module version = 0.0.2
[ 428.960] ABI class: X.Org Video Driver, version 23.0
[ 428.961] (II) FBTURBO(0): using /dev/fb0
[ 428.961] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 428.961] (II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 428.961] (==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32
[ 428.961] (==) FBTURBO(0): RGB weight 888
[ 428.961] (==) FBTURBO(0): Default visual is TrueColor
[ 428.961] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[ 428.961] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 5120kB)
[ 428.961] (**) FBTURBO(0): Option "fbdev" "/dev/fb0"
[ 428.961] (**) FBTURBO(0): Option "SwapbuffersWait" "true"
[ 428.962] (II) FBTURBO(0): processor: Unknown
[ 428.962] (II) FBTURBO(0): checking modes against framebuffer device...
[ 428.962] (II) FBTURBO(0): checking modes against monitor...
[ 428.962] (--) FBTURBO(0): Virtual size is 1280x1024 (pitch 1280)
[ 428.962] (**) FBTURBO(0): Built-in mode "current"
[ 428.962] (==) FBTURBO(0): DPI set to (96, 96)
[ 428.962] (II) Loading sub module "fb"
[ 428.962] (II) LoadModule: "fb"
[ 428.963] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 428.964] (II) Module fb: vendor="X.Org Foundation"
[ 428.964] compiled for 1.19.2, module version = 1.0.0
[ 428.964] ABI class: X.Org ANSI C Emulation, version 0.4
[ 428.964] (==) Depth 24 pixmap format is 32 bpp
[ 428.965] (II) FBTURBO(0): using backing store heuristics
[ 428.972] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[ 428.972] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[ 428.972] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[ 428.972] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[ 428.972] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[ 428.972] (==) FBTURBO(0): Backing store enabled
[ 428.973] (==) FBTURBO(0): DPMS enabled
[ 428.973] (II) FBTURBO(0): failed to enable hardware cursor
[ 428.973] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[ 428.973] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[ 428.973] (==) RandR enabled
[ 428.995] (II) SELinux: Disabled on system
[ 428.998] (II) AIGLX: Screen 0 is not DRI2 capable
[ 428.998] (EE) AIGLX: reverting to software rendering
[ 429.099] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 429.102] (II) IGLX: Loaded and initialized swrast
[ 429.102] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 429.238] (II) config/udev: Adding input device 3M 3M USB Touchscreen - EX II (/dev/input/event0)
[ 429.238] (**) 3M 3M USB Touchscreen - EX II: Applying InputClass "libinput touchscreen catchall"
[ 429.238] (**) 3M 3M USB Touchscreen - EX II: Applying InputClass "tslib touchscreen catchall"
[ 429.238] (II) LoadModule: "tslib"
[ 429.238] (II) Loading /usr/lib/xorg/modules/input/tslib_drv.so
[ 429.239] (II) Module tslib: vendor="X.Org Foundation"
[ 429.239] compiled for 1.19.2, module version = 1.2.0
[ 429.239] Module class: X.Org XInput Driver
[ 429.239] ABI class: X.Org XInput driver, version 24.1
[ 429.239] (II) Using input driver 'tslib' for '3M 3M USB Touchscreen - EX II'
[ 429.239] (**) 3M 3M USB Touchscreen - EX II: always reports core events
[ 429.239] (**) Option "path" "/dev/input/event0"
[ 429.240] (II) tslib: 3M 3M USB Touchscreen - EX II: using libts ABI version 0 (000900)
[ 429.240] (**) 3M 3M USB Touchscreen - EX II: always reports core events
[ 429.290] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/input/input0/event0"
[ 429.290] (II) XINPUT: Adding extended input device "3M 3M USB Touchscreen - EX II" (type: TOUCHSCREEN, id 6)
[ 429.292] (II) config/udev: Adding input device 3M 3M USB Touchscreen - EX II (/dev/input/mouse0)
[ 429.292] (**) 3M 3M USB Touchscreen - EX II: Applying InputClass "tslib touchscreen catchall"
[ 429.292] (II) Using input driver 'tslib' for '3M 3M USB Touchscreen - EX II'
[ 429.292] (**) 3M 3M USB Touchscreen - EX II: always reports core events
[ 429.292] (**) Option "path" "/dev/input/mouse0"
[ 429.292] (II) tslib: 3M 3M USB Touchscreen - EX II: using libts ABI version 0 (000900)
[ 429.292] (**) 3M 3M USB Touchscreen - EX II: always reports core events
[ 429.293] (EE) tslib: 3M 3M USB Touchscreen - EX II: ioctl EVIOCGBIT failed(EE) PreInit returned 2 for "3M 3M USB Touchscreen - EX II"
[ 429.293] (EE)
[ 429.293] (EE) Backtrace:
[ 429.293] (EE)
[ 429.293] (EE) Segmentation fault at address 0x0
[ 429.293] (EE)
Fatal server error:
[ 429.293] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 429.293] (EE)
[ 429.293] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 429.293] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 429.293] (EE)
[ 429.316] (EE) Server terminated with error (1). Closing log file.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment