Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Raspberry Pi 4 USB Gadget
#!/bin/bash
# Set up a Raspberry Pi 4 as a USB-C Ethernet Gadget
# Based on:
# - https://www.hardill.me.uk/wordpress/2019/11/02/pi4-usb-c-gadget/
# - https://pastebin.com/VtAusEmf
if ! $(grep -q dtoverlay=dwc2 /boot/config.txt) ; then
echo "Add the line dtoverlay=dwc2 to /boot/config.txt"
exit
fi
if ! $(grep -q modules-load=dwc2 /boot/cmdline.txt) ; then
echo "Add the line modules-load=dwc2 to /boot/cmdline.txt"
exit
fi
if ! $(grep -q libcomposite /etc/modules) ; then
echo "Add the line libcomposite to /etc/modules"
exit
fi
if ! $(grep -q "denyinterfaces usb0" /etc/dhcpcd.conf) ; then
echo "Add the line denyinterfaces usb0 to /etc/dhcpcd.conf"
exit
fi
if [[ ! -e /usr/sbin/dnsmasq ]] ; then
echo "Install dnsmasq"
exit
fi
if [[ ! -e /etc/dnsmasq.d/usb ]] ; then
echo "interface=usb0" > /etc/dnsmasq.d/usb
echo "dhcp-range=10.55.0.2,10.55.0.6,255.255.255.248,1h" >> /etc/dnsmasq.d/usb
echo "dhcp-option=3" >> /etc/dnsmasq.d/usb
echo "leasefile-ro" >> /etc/dnsmasq.d/usb
echo "Created /dnsmasq.d/usb"
fi
if [[ ! -e /etc/network/interfaces.d/usb0 ]] ; then
echo "auto usb0" > /etc/network/interfaces.d/usb0
echo "allow-hotplug usb0" >> /etc/network/interfaces.d/usb0
echo "iface usb0 inet static" >> /etc/network/interfaces.d/usb0
echo " address 10.55.0.1" >> /etc/network/interfaces.d/usb0
echo " netmask 255.255.255.248" >> /etc/network/interfaces.d/usb0
echo "Created /etc/network/interfaces.d/usb0"
fi
if [[ ! -e /root/usb.sh ]] ; then
cat << 'USBSETUP' > /root/usb.sh
#!/bin/bash
gadget=/sys/kernel/config/usb_gadget/pi4
usb_version="0x0200" # USB 2.0
device_class="0xEF"
device_subclass="0x02"
bcd_device="0x0100" # v1.0.0
device_protocol="0x01"
vendor_id="0x1d50"
product_id="0x60c7"
#vendor_id="0x1d6b" # Linux Foundation
#product_id="0x0104" # Multifunction composite gadget
manufacturer="Ian"
product="RPi4 USB Gadget"
serial="fedcba9876543211"
attr="0x80" # Bus powered
power="250"
config1="RNDIS"
config2="CDC"
ms_vendor_code="0xcd" # Microsoft
ms_qw_sign="MSFT100" # also Microsoft (if you couldn't tell)
ms_compat_id="RNDIS" # matches Windows RNDIS Drivers
ms_subcompat_id="5162001" # matches Windows RNDIS 6.0 Driver
mac="01:23:45:67:89:ab"
dev_mac="02$(echo ${mac} | cut -b 3-)"
host_mac="12$(echo ${mac} | cut -b 3-)"
mkdir -p ${gadget}
echo "${usb_version}" > ${gadget}/bcdUSB
echo "${device_class}" > ${gadget}/bDeviceClass
echo "${device_subclass}" > ${gadget}/bDeviceSubClass
echo "${vendor_id}" > ${gadget}/idVendor
echo "${product_id}" > ${gadget}/idProduct
echo "${bcd_device}" > ${gadget}/bcdDevice
echo "${device_protocol}" > ${gadget}/bDeviceProtocol
mkdir -p ${gadget}/strings/0x409
echo "${manufacturer}" > ${gadget}/strings/0x409/manufacturer
echo "${product}" > ${gadget}/strings/0x409/product
echo "${serial}" > ${gadget}/strings/0x409/serialnumber
mkdir ${gadget}/configs/c.1
echo "${attr}" > ${gadget}/configs/c.1/bmAttributes
echo "${power}" > ${gadget}/configs/c.1/MaxPower
mkdir -p ${gadget}/configs/c.1/strings/0x409
echo "${config1}" > ${gadget}/configs/c.1/strings/0x409/configuration
mkdir -p ${gadget}/os_desc
echo "1" > ${gadget}/os_desc/use
echo "${ms_vendor_code}" > ${gadget}/os_desc/b_vendor_code
echo "${ms_qw_sign}" > ${gadget}/os_desc/qw_sign
mkdir -p ${gadget}/functions/rndis.usb0
echo "${dev_mac}" > ${gadget}/functions/rndis.usb0/dev_addr
echo "${host_mac}" > ${gadget}/functions/rndis.usb0/host_addr
echo "${ms_compat_id}" > ${gadget}/functions/rndis.usb0/os_desc/interface.rndis/compatible_id
echo "${ms_subcompat_id}" > ${gadget}/functions/rndis.usb0/os_desc/interface.rndis/sub_compatible_id
#mkdir ${gadget}/configs/c.2
#echo "${attr}" > ${gadget}/configs/c.2/bmAttributes
#echo "${power}" > ${gadget}/configs/c.2/MaxPower
#mkdir -p ${gadget}/configs/c.2/strings/0x409
#echo "${config2}" > ${gadget}/configs/c.2/strings/0x409/configuration
#mkdir -p ${gadget}/functions/ecm.usb0
#echo "${dev_mac}" > ${gadget}/functions/ecm.usb0/dev_addr
#echo "${host_mac}" > ${gadget}/functions/ecm.usb0/host_addr
ln -s ${gadget}/configs/c.1 ${gadget}/os_desc
ln -s ${gadget}/functions/rndis.usb0 ${gadget}/configs/c.1
#ln -s ${gadget}/functions/ecm.usb0 ${gadget}/configs/c.2
ls /sys/class/udc > ${gadget}/UDC
udevadm settle -t 5 || :
ifup usb0
service dnsmasq restart
USBSETUP
chmod 750 /root/usb.sh
echo "Created /root/usb.sh"
fi
if ! $(grep -q /root/usb.sh /etc/rc.local) ; then
echo "Add the command /root/usb.sh to /etc/rc.local"
fi
@freeman-x
Copy link

Hi, it's great .sh file for RaspiOS to Raspberry Pi, and did you have any idea for Ubuntu to Raspberry Pi?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment