Nedis WIFIDS10WT Tasmota Configuration

gistfile1.txt

{"NAME":"Nedis WIFIDS10WT","GPIO":[0,107,0,108,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54}

Module 54

Backlog TuyaMCU 11,4; TuyaMCU 51,51

Backlog SetOption1 1; SetOption65 1; SetOption66 1

Rule1 
 ON TuyaReceived#Data=55AA000500056A0400010078 DO publish2 stat/%topic%/FIRE OFF ENDON
 ON TuyaReceived#Data=55AA000500056A0400010078 DO publish2 stat/%topic%/TEST OFF ENDON
 ON TuyaReceived#Data=55AA000500056A0400010078 DO publish2 stat/%topic%/BATTERY OFF ENDON
 ON TuyaReceived#Data=55AA000500056A0400010078 DO publish2 stat/%topic%/MUTE OFF ENDON
 ON TuyaReceived#Data=55AA000500056A0400010179 DO publish2 stat/%topic%/FIRE ON ENDON
 ON TuyaReceived#Data=55AA000500056A0400010179 DO publish2 stat/%topic%/MUTE OFF ENDON
 ON TuyaReceived#Data=55AA000500056A040001027A DO publish2 stat/%topic%/FIRE ON ENDON
 ON TuyaReceived#Data=55AA000500056A040001027A DO publish2 stat/%topic%/MUTE ON ENDON
 ON TuyaReceived#Data=55AA000500056A040001037B DO publish2 stat/%topic%/FIRE ON ENDON
 ON TuyaReceived#Data=55AA000500056A040001037B DO publish2 stat/%topic%/TEST ON ENDON
 ON TuyaReceived#Data=55AA000500056A040001037B DO publish2 stat/%topic%/MUTE OFF ENDON
 ON TuyaReceived#Data=55AA000500056A040001047C DO publish2 stat/%topic%/BATTERY ON ENDON
 
Rule2
 ON system#boot do publish2 homeassistant/binary_sensor/%macaddr%_fire/config {"name":"Office Fire Alarm","state_topic":"stat/%topic%/FIRE","device_class":"smoke","unique_id":"%macaddr%_fire","device":{"connections":[["mac","%macaddr%"]]}} ENDON
 ON system#boot do publish2 homeassistant/binary_sensor/%macaddr%_test/config {"name":"Office Fire Alarm Test","state_topic":"stat/%topic%/TEST","icon":"mdi:bell-alert","unique_id":"%macaddr%_test","device":{"connections":[["mac","%macaddr%"]]}} ENDON
 ON system#boot do publish2 homeassistant/binary_sensor/%macaddr%_mute/config {"name":"Office Fire Alarm Mute","state_topic":"stat/%topic%/MUTE","icon":"mdi:bell-sleep","unique_id":"%macaddr%_mute","device":{"connections":[["mac","%macaddr%"]]}} ENDON
 ON system#boot do publish2 homeassistant/binary_sensor/%macaddr%_battery/config {"name":"Office Fire Alarm Battery","state_topic":"stat/%topic%/BATTERY","device_class":"battery","unique_id":"%macaddr%_battery","device":{"connections":[["mac","%macaddr%"]]}} ENDON

thanks for the reply.
I flash the device again and reloaded the software. If I press the test button then I see in HA a report of the SSID, address and that sort of things, until the red light dims. Still the other Fire Alarm, Battery remains unknown.
In MQTT Exporer I see tele/tasmota_nnn/INFO1 2 and 3 and then
tele/tasmota_313159/STATE, but no result.
So if I press the button, shhould it then also send this message? Or only weekly?
-- Paul