Created
October 20, 2022 19:14
-
-
Save im-0/16bebce2976b421755dd577a80c1cd15 to your computer and use it in GitHub Desktop.
openwrt-snap2022.10.20-xiaomi-ax3200-2022.10.20-boot-failure.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| F0: 102B 0000 | |
| F6: 0000 0000 | |
| V0: 0000 0000 [0001] | |
| 00: 0000 0000 | |
| BP: 0000 0041 [0000] | |
| G0: 0190 0000 | |
| T0: 0000 036D [000F] | |
| Jump to BL | |
| UNIVPLL_CON0 = 0xFE000000!!! | |
| mt_pll_init: Set pll frequency for 25M crystal | |
| RAM_CONSOLE preloader last status: 0x0 0x0 0x0 0x0 0x0 0x0 | |
| [PMIC_WRAP]wrap_init pass,the return value=0. | |
| [pmic_init] Preloader Start.................. | |
| [pmic_init] MT6380 CHIP Code, reg_val = 0, 1:E2 0:E3 | |
| [pmic_init] Done................... | |
| Chip part number:7622B | |
| MT7622 Version: 1.2.8, (iPA) | |
| SSC OFF | |
| mt_pll_post_init: mt_get_cpu_freq = 1350000Khz | |
| mt_pll_post_init: mt_get_mem_freq = 1600000Khz | |
| mt_pll_post_init: mt_get_bus_freq = 279980Khz | |
| [PLFM] Init I2C: OK(0) | |
| [BLDR] Build Time: 20210316-161525 | |
| ==== Dump RGU Reg ======== | |
| RGU MODE: 14 | |
| RGU LENGTH: FFE0 | |
| RGU STA: 40000000 | |
| RGU INTERVAL: FFF | |
| RGU SWSYSRST: 8000 | |
| ==== Dump RGU Reg End ==== | |
| RGU: g_rgu_satus:2 | |
| mtk_wdt_mode_config mode value=10, tmp:22000010 | |
| PL RGU RST: ?? | |
| SW reset with bypass power key flag | |
| Find bypass powerkey flag | |
| WDT NONRST=0x20000000 | |
| WDT IRQ_EN=0x300002 | |
| RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3) | |
| [EMI] MDL number = 2 | |
| [EMI] DRAMC calibration start | |
| [DDR] Gating glitch patched (0<cnt<=6) | |
| [EMI] DRAMC calibration end | |
| [EMI]rank size auto detect | |
| [EMI]start_addr[0x40000000]=0x12345678, test_addr[0x48000000]= 0xEDCBA987 | |
| [EMI]start_addr[0x40000000]=0xEDCBA987, test_addr[0x50000000]= 0xEDCBA987 | |
| [EMI]rank0 size: 0x10000000 | |
| [MEM] complex R/W mem test pass | |
| RAM_CONSOLE wdt status (0x2)=0x2 | |
| mtk_snand_get_device_info | |
| 2-Recognize NAND: ID [C8 1 ], Device Name [F50L1G41LB], Page Size [2048]B Spare Size [64]B Total Size [128]MB | |
| [BBT] BMT.v2 is found at 0x3FF | |
| [PLFM] Init Boot Device: OK(0) | |
| [PART] blksz: 2048B | |
| [PART] [0x0000000000000000-0x000000000007FFFF] "PRELOADER" (256 blocks) | |
| [PART] [0x0000000000080000-0x00000000000BFFFF] "tee1" (128 blocks) | |
| [PART] [0x00000000000C0000-0x000000000013FFFF] "lk" (256 blocks) | |
| Device APC domain init setup: | |
| Domain Setup (0x0) | |
| Domain Setup (0x0) | |
| Device APC domain after setup: | |
| Domain Setup (0x0) | |
| Domain Setup (0x0) | |
| [PART] Image with part header | |
| [PART] name : U-Boot | |
| [PART] addr : 41E00000h mode : -1 | |
| [PART] size : 356560 | |
| [PART] magic: 58881688h | |
| [PART] load "lk" from 0x00000000000C0200 (dev) to 0x41E00000 (mem) [SUCCESS] | |
| [PART] load speed: 16581KB/s, 356560 bytes, 21ms | |
| load lk (ret=0) | |
| [PART] Image with part header | |
| [PART] name : atf | |
| [PART] addr : FFFFFFFFh mode : -1 | |
| [PART] size : 57936 | |
| [PART] magic: 58881688h | |
| [PART] load "tee1" from 0x0000000000080200 (dev) to 0x43000DC0 (mem) [SUCCESS] | |
| [PART] load speed: 14144KB/s, 57936 bytes, 4ms | |
| load tee1 (ret=0) | |
| [BLDR] bldr load tee part ret=0x0, addr=0x43001000 | |
| [BLDR] boot part. not found | |
| [BLDR] part_load_images ret=0x0 | |
| [BLDR] Others, jump to ATF | |
| [BLDR] jump to 0x41E00000 | |
| [BLDR] <0x41E00000>=0xEA00000F | |
| [BLDR] <0x41E00004>=0xE59FF014 | |
| U-Boot 2014.04-rc1 (Aug 07 2021 - 08:08:31) | |
| auto detection g_total_rank_size = 0x F000000 | |
| DRAM: 240 MiB | |
| Turn on power orange! | |
| NAND: Recognize SNAND: ID [c8 1 ], Device Name [F50L1G41LB], Page Size [2048]B Spare Size [64]B Total Size [128]MB | |
| [mtk_snand] probe successfully! | |
| [BBT] BMT.v2 is found at 0x3ff | |
| 128 MiB | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: mtk_eth | |
| Uip activated | |
| *** U-Boot SPI NAND *** Press UP/DOWN to move or Press 1~3 to choose, ENTER to select 1. Load firmware 0 and bootup. 2. Load firmware 1 and bootup. 3. Load firmware selected by Xiaoqiang and bootup. U-Boot console trigger button release! | |
| Erasing NAND... | |
| [mtk_nand_erase_hw] mtk_nand_erase_hw @4249, ret:0x40. page:0x280 | |
| Erasing at 0x140000 -- 100% complete. | |
| Writing to NAND... OK | |
| Booting System 0 | |
| NAND read: device 0 offset 0x2c0000, size 0x2000 | |
| 8192 bytes read: OK | |
| [do_read_image_blks] This is a FIT image,img_size = 0x3cd7c0 | |
| [do_read_image_blks] img_blks = 0x79b | |
| [do_read_image_blks] img_align_size = 0x3cd800 | |
| NAND read: device 0 offset 0x2c0000, size 0x3cd800 | |
| 3987456 bytes read: OK | |
| bootm flag=0, states=70f | |
| ## Loading kernel from FIT Image at 4007ff28 ... | |
| Using 'config-1' configuration | |
| Trying 'kernel-1' kernel subimage | |
| Description: ARM64 OpenWrt Linux-5.15.74 | |
| Type: Kernel Image | |
| Compression: lzma compressed | |
| Data Start: 0x40080010 | |
| Data Size: 3956429 Bytes = 3.8 MiB | |
| Architecture: AArch64 | |
| OS: Linux | |
| Load Address: 0x44000000 | |
| Entry Point: 0x44000000 | |
| Hash algo: crc32 | |
| Hash value: ab6a87f3 | |
| Hash algo: sha1 | |
| Hash value: 574074db22b10cf27fafa90a0a34a3118aa40d05 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| ## Loading fdt from FIT Image at 4007ff28 ... | |
| Using 'config-1' configuration | |
| Trying 'fdt-1' fdt subimage | |
| Description: ARM64 OpenWrt xiaomi_redmi-router-ax6s device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x40446028 | |
| Data Size: 29038 Bytes = 28.4 KiB | |
| Architecture: AArch64 | |
| Hash algo: crc32 | |
| Hash value: 2aab0edd | |
| Hash algo: sha1 | |
| Hash value: 9cd29a9030c5a37618b891e87eb4aabde134720e | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| Booting using the fdt blob at 0x40446028 | |
| Uncompressing Kernel Image ... OK | |
| Loading Device Tree to 4cf39000, end 4cf4316d ... OK | |
| Starting kernel ... | |
| [ATF][ 1.636954]save kernel info | |
| [ATF][ 1.639891]Kernel_EL2 | |
| [ATF][ 1.642561]Kernel is 64Bit | |
| [ATF][ 1.645649]pc=0x44000000, r0=0x4cf39000, r1=0x0 | |
| INFO: BL3-1: Preparing for EL3 exit to normal world, Kernel | |
| INFO: BL3-1: Next image address = 0x44000000 | |
| INFO: BL3-1: Next image spsr = 0x3c9 | |
| [ATF][ 1.663347]el3_exit | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.15.74 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20989-711f1a8bcb) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed Oct 19 05:07:14 2022 | |
| [ 0.000000] Machine model: Xiaomi Redmi Router AX6S | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000040000000-0x000000004fffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] | |
| [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] | |
| [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv0.2 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] percpu: Embedded 17 pages/cpu s30040 r8192 d31400 u69632 | |
| [ 0.000000] pcpu-alloc: s30040 r8192 d31400 u69632 alloc=17*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration | |
| [ 0.000000] CPU features: detected: ARM erratum 843419 | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512 | |
| [ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 swiotlb=512 rootfstype=squashfs firmware=0 | |
| [ 0.000000] Unknown kernel command line parameters "firmware=0", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 244284K/262144K available (8384K kernel code, 902K rwdata, 2212K rodata, 384K init, 305K bss, 17860K reserved, 0K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns | |
| [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns | |
| [ 0.000195] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000) | |
| [ 0.000206] pid_max: default: 32768 minimum: 301 | |
| [ 0.000293] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) | |
| [ 0.000302] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) | |
| [ 0.001384] rcu: Hierarchical SRCU implementation. | |
| [ 0.001483] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build | |
| [ 0.001692] smp: Bringing up secondary CPUs ... | |
| [ 0.002030] Detected VIPT I-cache on CPU1 | |
| [ 0.002076] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.002139] smp: Brought up 1 node, 2 CPUs | |
| [ 0.002148] SMP: Total of 2 processors activated. | |
| [ 0.002153] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002158] CPU features: detected: CRC32 instructions | |
| [ 0.002251] CPU: All CPU(s) started at EL2 | |
| [ 0.002262] alternatives: patching kernel code | |
| [ 0.005449] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.005474] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.005577] pinctrl core: initialized pinctrl subsystem | |
| [ 0.006295] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.006539] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.006570] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.006595] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.006808] thermal_sys: Registered thermal governor 'fair_share' | |
| [ 0.006812] thermal_sys: Registered thermal governor 'bang_bang' | |
| [ 0.006817] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.006821] thermal_sys: Registered thermal governor 'user_space' | |
| [ 0.006997] ASID allocator initialised with 65536 entries | |
| [ 0.007410] pstore: Registered ramoops as persistent store backend | |
| [ 0.007415] ramoops: using 0x10000@0x42ff0000, ecc: 0 | |
| [ 0.024799] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.026569] SCSI subsystem initialized | |
| [ 0.026680] libata version 3.00 loaded. | |
| [ 0.027609] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.028029] NET: Registered PF_INET protocol family | |
| [ 0.028112] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.028419] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) | |
| [ 0.028436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.028445] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
| [ 0.028464] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.028494] TCP: Hash tables configured (established 2048 bind 2048) | |
| [ 0.028551] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.028568] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.028665] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.028684] PCI: CLS 0 bytes, default 64 | |
| [ 0.031060] workingset: timestamp_bits=46 max_order=16 bucket_order=0 | |
| [ 0.033735] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.033747] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.065717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| [ 0.066377] mt7622-pinctrl 10211000.pinctrl: invalid group "pwm_ch7_2" for function "pwm" | |
| [ 0.069331] mt-pmic-pwrap 10001000.pwrap: unexpected interrupt int=0x1 | |
| [ 0.083438] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled | |
| [ 0.085003] printk: console [ttyS0] disabled | |
| [ 0.105210] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 124, base_baud = 1562500) is a ST16650V2 | |
| [ 0.692253] printk: console [ttyS0] enabled | |
| [ 0.697366] mtk_rng 1020f000.rng: registered RNG driver | |
| [ 0.702980] random: crng init done | |
| [ 0.708760] loop: module loaded | |
| [ 0.711910] Loading iSCSI transport class v2.0-870. | |
| [ 0.717858] mtk-ecc 1100e000.ecc: probed | |
| [ 0.722698] spi-nand spi0.0: ESMT SPI NAND was found. | |
| [ 0.727792] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 | |
| [ 0.735902] mtk-snand 1100d000.spi: ECC strength: 4 bits per 512 bytes | |
| [ 0.845161] nand: found bad block 0x1 | |
| [ 0.849236] nand: found bad block 0x4 | |
| [ 0.853165] nand: found bad block 0x6 | |
| [ 0.856959] nand: found bad block 0x7 | |
| [ 0.860760] nand: found bad block 0x8 | |
| [ 0.864688] nand: found bad block 0xa | |
| [ 0.868624] nand: found bad block 0xc | |
| [ 0.872551] nand: found bad block 0xe | |
| [ 0.876344] nand: found bad block 0xf | |
| [ 0.880956] nand: found bad block 0x16 | |
| [ 0.884836] nand: found bad block 0x17 | |
| [ 0.888721] nand: found bad block 0x18 | |
| [ 0.892601] nand: found bad block 0x19 | |
| [ 0.896481] nand: found bad block 0x1a | |
| [ 0.900367] nand: found bad block 0x1b | |
| [ 0.904246] nand: found bad block 0x1c | |
| [ 0.908134] nand: found bad block 0x1d | |
| [ 0.912012] nand: found bad block 0x1e | |
| [ 0.915893] nand: found bad block 0x1f | |
| [ 0.919780] nand: found bad block 0x20 | |
| [ 0.923660] nand: found bad block 0x21 | |
| [ 0.927540] nand: found bad block 0x22 | |
| [ 0.931426] nand: found bad block 0x23 | |
| [ 0.935306] nand: found bad block 0x24 | |
| [ 0.939194] nand: found bad block 0x25 | |
| [ 0.943074] nand: found bad block 0x26 | |
| [ 0.946953] nand: found bad block 0x27 | |
| [ 0.950839] nand: found bad block 0x28 | |
| [ 0.954718] nand: found bad block 0x29 | |
| [ 0.958605] nand: found bad block 0x2a | |
| [ 0.962344] nand: FATAL ERR: too many bad blocks!! | |
| [ 0.967324] 10 fixed-partitions partitions found on MTD device spi0.0 | |
| [ 0.973788] OF: Bad cell count for /spi@1100d000/flash@0/partitions | |
| [ 0.980075] OF: Bad cell count for /spi@1100d000/flash@0/partitions | |
| [ 0.986590] OF: Bad cell count for /spi@1100d000/flash@0/partitions | |
| [ 0.992871] OF: Bad cell count for /spi@1100d000/flash@0/partitions | |
| [ 0.999243] Creating 10 MTD partitions on "spi0.0": | |
| [ 1.004115] 0x000000000000-0x000000080000 : "Preloader" | |
| [ 1.010258] 0x000000080000-0x0000000c0000 : "ATF" | |
| [ 1.015481] 0x0000000c0000-0x000000140000 : "u-boot" | |
| [ 1.021247] 0x000000140000-0x000000180000 : "u-boot-env" | |
| [ 1.027057] 0x000000180000-0x0000001c0000 : "bdata" | |
| [ 1.032445] 0x0000001c0000-0x000000240000 : "factory" | |
| [ 1.038294] 0x000000240000-0x000000280000 : "crash" | |
| [ 1.043675] 0x000000280000-0x0000002c0000 : "crash_log" | |
| [ 1.049475] 0x0000002c0000-0x0000006c0000 : "kernel" | |
| [ 1.059280] read error in "kernel" at offset 0x0 | |
| [ 1.063898] 0x0000006c0000-0x0000075c0000 : "ubi" | |
| [ 1.205085] mtk_soc_eth 1b100000.ethernet: generated random MAC address 5e:69:a1:8a:07:01 | |
| [ 1.213581] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffffc009500000, irq 134 | |
| [ 1.223276] i2c_dev: i2c /dev entries driver | |
| [ 1.228469] mtk-wdt 10212000.watchdog: IRQ index 0 not found | |
| [ 1.234241] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) | |
| [ 1.243714] NET: Registered PF_INET6 protocol family | |
| [ 1.249718] Segment Routing with IPv6 | |
| [ 1.253390] In-situ OAM (IOAM) with IPv6 | |
| [ 1.257339] NET: Registered PF_PACKET protocol family | |
| [ 1.262434] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 1.275452] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.280788] pstore: Using crash dump compression: deflate | |
| [ 1.295366] mtk-pcie 1a143000.pcie: host bridge /pcie@1a143000 ranges: | |
| [ 1.301957] mtk-pcie 1a143000.pcie: Parsing ranges property... | |
| [ 1.307791] mtk-pcie 1a143000.pcie: MEM 0x0020000000..0x0027ffffff -> 0x0020000000 | |
| [ 1.443911] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.450095] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.455575] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] | |
| [ 1.462446] pci_bus 0000:00: scanning bus | |
| [ 1.466487] pci 0000:00:00.0: [14c3:3258] type 01 class 0x060400 | |
| [ 1.472518] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x1ffffffff 64bit pref] | |
| [ 1.481123] pci_bus 0000:00: fixups for bus | |
| [ 1.485303] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0 | |
| [ 1.492005] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.500015] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1 | |
| [ 1.506794] pci_bus 0000:01: scanning bus | |
| [ 1.511008] pci 0000:01:00.0: [14c3:7915] type 00 class 0x000280 | |
| [ 1.517185] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] | |
| [ 1.524512] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] | |
| [ 1.531837] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] | |
| [ 1.539783] pci 0000:01:00.0: supports D1 D2 | |
| [ 1.544044] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 1.550683] pci 0000:01:00.0: PME# disabled | |
| [ 1.555159] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) | |
| [ 1.598747] pci_bus 0000:01: fixups for bus | |
| [ 1.602925] pci_bus 0000:01: bus scan returning with max=01 | |
| [ 1.608497] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.615111] pci_bus 0000:00: bus scan returning with max=01 | |
| [ 1.620694] pci 0000:00:00.0: BAR 0: no space for [mem size 0x200000000 64bit pref] | |
| [ 1.628347] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x200000000 64bit pref] | |
| [ 1.636344] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] | |
| [ 1.643131] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] | |
| [ 1.650956] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] | |
| [ 1.658783] pci 0000:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] | |
| [ 1.666602] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.671568] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] | |
| [ 1.678459] pcieport 0000:00:00.0: assign IRQ: got 139 | |
| [ 1.683600] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.689708] pcieport 0000:00:00.0: enabling bus mastering | |
| [ 1.695139] mtk-pcie 1a143000.pcie: msi#0 address_hi 0x0 address_lo 0x44dbd0c0 | |
| [ 1.702509] pcieport 0000:00:00.0: PME: Signaling with IRQ 139 | |
| [ 1.708413] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x325814c3) | |
| [ 1.716584] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100006) | |
| [ 1.724589] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0x6040000) | |
| [ 1.732677] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10000) | |
| [ 1.740590] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0xc) | |
| [ 1.748243] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0) | |
| [ 1.755892] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0x40010100) | |
| [ 1.764153] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0x4200000) | |
| [ 1.772327] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x20102000) | |
| [ 1.780589] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x0) | |
| [ 1.788242] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0) | |
| [ 1.795890] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0) | |
| [ 1.803543] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0) | |
| [ 1.811196] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x50) | |
| [ 1.818935] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0) | |
| [ 1.826584] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x2018b) | |
| [ 1.835112] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered | |
| [ 1.885569] mt7530 mdio-bus:00: configuring for fixed/2500base-x link mode | |
| [ 1.892914] mt7530 mdio-bus:00: Link is Up - 2.5Gbps/Full - flow control rx/tx | |
| [ 1.902539] mt7530 mdio-bus:00 wan (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=140) | |
| [ 1.922393] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=141) | |
| [ 1.942052] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=142) | |
| [ 1.961681] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=143) | |
| [ 1.972600] DSA: tree 0 setup | |
| [ 1.976170] UBI error: unable to read from mtd9 | |
| [ 1.981618] /dev/root: Can't open blockdev | |
| [ 1.985712] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 | |
| [ 1.993194] Please append a correct "root=" boot option; here are the available partitions: | |
| [ 2.001560] 1f00 512 mtdblock0 | |
| [ 2.001565] (driver?) | |
| [ 2.008092] 1f01 256 mtdblock1 | |
| [ 2.008096] (driver?) | |
| [ 2.014617] 1f02 512 mtdblock2 | |
| [ 2.014621] (driver?) | |
| [ 2.021147] 1f03 256 mtdblock3 | |
| [ 2.021151] (driver?) | |
| [ 2.027676] 1f04 256 mtdblock4 | |
| [ 2.027680] (driver?) | |
| [ 2.034202] 1f05 512 mtdblock5 | |
| [ 2.034205] (driver?) | |
| [ 2.040730] 1f06 256 mtdblock6 | |
| [ 2.040734] (driver?) | |
| [ 2.047255] 1f07 256 mtdblock7 | |
| [ 2.047259] (driver?) | |
| [ 2.053785] 1f08 4096 mtdblock8 | |
| [ 2.053789] (driver?) | |
| [ 2.060317] 1f09 113664 mtdblock9 | |
| [ 2.060321] (driver?) | |
| [ 2.066842] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) | |
| [ 2.075095] SMP: stopping secondary CPUs | |
| [ 2.079011] Kernel Offset: disabled | |
| [ 2.082488] CPU features: 0x00006000,00000802 | |
| [ 2.086836] Memory Limit: none | |
| [ 2.093350] Rebooting in 1 seconds.. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment