dmesg

root@kokos:~# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.93 (builder@openwrt-compile-ng) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15598+80-1fb413e657)) #0 SMP Sun Jan 31 17:42:50 2021
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000]   Normal zone: 1080 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] percpu: Embedded 15 pages/cpu s30220 r8192 d23028 u61440
[    0.000000] pcpu-alloc: s30220 r8192 d23028 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
[    0.000000] Kernel command line: 
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 476868K/491520K available (6245K kernel code, 197K rwdata, 1556K rodata, 1024K init, 233K bss, 14652K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x4ec with crng_init=0
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000023] Switching to timer-based delay loop, resolution 160ns
[    0.000273] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000293] pid_max: default: 32768 minimum: 301
[    0.000488] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000508] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001569] CPU: Testing write buffer coherency: ok
[    0.002734] Setting up static identity map for 0x42300000 - 0x42300060
[    0.002916] rcu: Hierarchical SRCU implementation.
[    0.003415] smp: Bringing up secondary CPUs ...
[    0.005361] smp: Brought up 1 node, 2 CPUs
[    0.005378] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.005388] CPU: All CPU(s) started in SVC mode.
[    0.017180] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.017335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017365] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.017513] pinctrl core: initialized pinctrl subsystem
[    0.018657] NET: Registered protocol family 16
[    0.018958] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.020378] cpuidle: using governor ladder
[    0.020445] cpuidle: using governor menu
[    0.056584] usbcore: registered new interface driver usbfs
[    0.056664] usbcore: registered new interface driver hub
[    0.056736] usbcore: registered new device driver usb
[    0.056803] pps_core: LinuxPPS API ver. 1 registered
[    0.056815] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.056849] PTP clock support registered
[    0.057686] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.058846] clocksource: Switched to clocksource dg_timer
[    0.059736] thermal_sys: Registered thermal governor 'step_wise'
[    0.062440] NET: Registered protocol family 2
[    0.063221] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.063269] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.063310] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.063363] TCP: Hash tables configured (established 4096 bind 4096)
[    0.063464] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.063494] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.063750] NET: Registered protocol family 1
[    0.063801] PCI: CLS 0 bytes, default 64
[    0.065110] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.072648] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.072664] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.112972] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.113118] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.113227] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.113491] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[    0.113518] qcom-pcie 1b500000.pci: Parsing ranges property...
[    0.113564] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.113603] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.334564] qcom-pcie 1b500000.pci: Link up
[    0.334748] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.334772] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.334794] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.334810] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.334827] pci_bus 0000:00: scanning bus
[    0.334872] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[    0.335045] pci 0000:00:00.0: supports D1
[    0.335060] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.335080] pci 0000:00:00.0: PME# disabled
[    0.339445] pci_bus 0000:00: fixups for bus
[    0.339470] PCI: bus0: Fast back to back transfers disabled
[    0.339496] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.339625] pci_bus 0000:01: scanning bus
[    0.339805] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.340160] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.341307] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.341353] pci 0000:01:00.0: PME# disabled
[    0.345725] pci_bus 0000:01: fixups for bus
[    0.345798] PCI: bus1: Fast back to back transfers disabled
[    0.345816] pci_bus 0000:01: bus scan returning with max=01
[    0.345834] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.345851] pci_bus 0000:00: bus scan returning with max=ff
[    0.345886] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.345910] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.346038] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.346063] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.346267] pcieport 0000:00:00.0: assign IRQ: got 38
[    0.346827] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[    0.347380] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.347509] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.347640] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.347901] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[    0.347925] qcom-pcie 1b700000.pci: Parsing ranges property...
[    0.347966] qcom-pcie 1b700000.pci:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.348001] qcom-pcie 1b700000.pci:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.576231] qcom-pcie 1b700000.pci: Link up
[    0.576400] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.576421] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.576437] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.576453] pci_bus 0001:00: scanning bus
[    0.576495] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[    0.576652] pci 0001:00:00.0: supports D1
[    0.576668] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.576685] pci 0001:00:00.0: PME# disabled
[    0.580980] pci_bus 0001:00: fixups for bus
[    0.581000] PCI: bus0: Fast back to back transfers disabled
[    0.581019] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.581142] pci_bus 0001:01: scanning bus
[    0.581331] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.581710] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.582946] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.582995] pci 0001:01:00.0: PME# disabled
[    0.583251] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    0.587412] pci_bus 0001:01: fixups for bus
[    0.587491] PCI: bus1: Fast back to back transfers disabled
[    0.587508] pci_bus 0001:01: bus scan returning with max=01
[    0.587524] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.587541] pci_bus 0001:00: bus scan returning with max=ff
[    0.587568] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.587590] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.587722] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.587747] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.587935] pcieport 0001:00:00.0: assign IRQ: got 40
[    0.588579] pcieport 0001:00:00.0: AER: enabled with IRQ 41
[    0.591393] L2 @ QSB rate. Forcing new rate.
[    0.591621] L2 @ 384000 KHz
[    0.591810] CPU0 @ 800000 KHz
[    0.591825] CPU1 @ QSB rate. Forcing new rate.
[    0.591959] CPU1 @ 384000 KHz
[    0.595805] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.597223] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    0.599026] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.600015] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.600069] msm_serial 16340000.serial: uartclk = 7372800
[    0.600140] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 42, base_baud = 460800) is a MSM
[    0.600180] msm_serial: console setup on port #0
[    1.385524] printk: console [ttyMSM0] enabled
[    1.390595] msm_serial: driver initialized
[    1.400044] loop: module loaded
[    1.401327] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.403525] spi-nor spi0.0: mx25u25635f (32768 Kbytes)
[    1.409654] 25 fixed-partitions partitions found on MTD device spi0.0
[    1.414323] Creating 25 MTD partitions on "spi0.0":
[    1.420937] 0x000000000000-0x000000020000 : "SBL1"
[    1.426585] 0x000000020000-0x000000040000 : "MIBIB"
[    1.431440] 0x000000040000-0x000000060000 : "SBL2"
[    1.436109] 0x000000060000-0x000000090000 : "SBL3"
[    1.441048] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[    1.445758] 0x0000000a0000-0x0000000b0000 : "SSD"
[    1.450958] 0x0000000b0000-0x0000000e0000 : "TZ"
[    1.455725] 0x0000000e0000-0x000000100000 : "RPM"
[    1.460498] 0x000000100000-0x000000170000 : "fs-uboot"
[    1.465000] 0x000000170000-0x0000001b0000 : "uboot-env"
[    1.470164] 0x0000001b0000-0x0000001f0000 : "radio"
[    1.475203] 0x0000001f0000-0x0000005f0000 : "os-image"
[    1.480149] 0x0000005f0000-0x000001ef0000 : "rootfs"
[    1.485213] mtd: device 12 (rootfs) set to be root filesystem
[    1.490088] 1 squashfs-split partitions found on MTD device rootfs
[    1.495083] 0x000001450000-0x000001ef0000 : "rootfs_data"
[    1.502848] 0x000001ef0000-0x000001ef0200 : "default-mac"
[    1.508120] 0x000001ef0200-0x000001ef0400 : "pin"
[    1.513539] 0x000001ef0400-0x000001f00000 : "product-info"
[    1.518110] 0x000001f00000-0x000001f10000 : "partition-table"
[    1.523623] 0x000001f10000-0x000001f20000 : "soft-version"
[    1.529485] 0x000001f20000-0x000001f30000 : "support-list"
[    1.534749] 0x000001f30000-0x000001f40000 : "profile"
[    1.540343] 0x000001f40000-0x000001f50000 : "default-config"
[    1.545317] 0x000001f50000-0x000001f90000 : "user-config"
[    1.551161] 0x000001f90000-0x000001fd0000 : "qos-db"
[    1.556378] 0x000001fd0000-0x000001fe0000 : "usb-config"
[    1.561518] 0x000001fe0000-0x000002000000 : "log"
[    1.568727] libphy: ipq8064_mdio_bus: probed
[    1.587131] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[    2.361824] ar8327: qca,phy-rgmii-en is not specified
[    2.362721] libphy: Fixed MDIO Bus: probed
[    2.366633] i2c /dev entries driver
[    2.373671] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.374019] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.381673] sdhci: Secure Digital Host Controller Interface driver
[    2.387825] sdhci: Copyright(c) Pierre Ossman
[    2.394151] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.403501] NET: Registered protocol family 10
[    2.406104] Segment Routing with IPv6
[    2.408625] NET: Registered protocol family 17
[    2.412477] Bridge firewalling registered
[    2.416849] 8021q: 802.1Q VLAN Support v1.8
[    2.420805] Registering SWP/SWPB emulation handler
[    2.460334] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.480699] s1a: Bringing 0uV into 1050000-1050000uV
[    2.481141] s1a: supplied by regulator-dummy
[    2.484945] s1b: Bringing 0uV into 1050000-1050000uV
[    2.489459] s1b: supplied by regulator-dummy
[    2.494144] s2a: Bringing 0uV into 800000-800000uV
[    2.498534] s2a: supplied by regulator-dummy
[    2.503066] s2b: Bringing 0uV into 800000-800000uV
[    2.507541] s2b: supplied by regulator-dummy
[    2.526043] hctosys: unable to open rtc device (rtc0)
[    2.532058] random: fast init done
[    2.533675] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[    2.535002] Freeing unused kernel memory: 1024K
[    2.560423] Run /sbin/init as init process
[    4.416314] random: crng init done
[    6.138213] init: Console is alive
[    6.138597] init: - watchdog -
[   10.845436] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   10.954435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.957675] SCSI subsystem initialized
[   10.965157] libata version 3.00 loaded.
[   10.968887] ehci-fsl: Freescale EHCI Host controller driver
[   10.970556] ehci-platform: EHCI generic platform driver
[   10.977168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.978986] ohci-platform: OHCI generic platform driver
[   10.986968] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[   10.989946] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[   10.995743] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[   11.001888] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[   11.009175] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[   11.013448] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[   11.019283] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[   11.025255] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[   11.040284] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[   11.144398] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[   11.249884] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   11.249947] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   11.254447] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[   11.261962] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0x11000000
[   11.272205] hub 1-0:1.0: USB hub found
[   11.277138] hub 1-0:1.0: 1 port detected
[   11.281216] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   11.285009] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   11.290372] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   11.298785] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.304864] hub 2-0:1.0: USB hub found
[   11.312757] hub 2-0:1.0: 1 port detected
[   11.316523] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.320404] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   11.325755] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[   11.333282] xhci-hcd xhci-hcd.1.auto: irq 49, io mem 0x10000000
[   11.344368] hub 3-0:1.0: USB hub found
[   11.348474] hub 3-0:1.0: 1 port detected
[   11.352543] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.356350] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   11.361713] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   11.369352] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.376134] hub 4-0:1.0: USB hub found
[   11.384100] hub 4-0:1.0: 1 port detected
[   11.390702] usbcore: registered new interface driver usb-storage
[   11.391787] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   11.402577] init: - preinit -
[   12.569513] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   12.693872] usb-storage 2-1:1.0: USB Mass Storage device detected
[   12.699682] scsi host0: usb-storage 2-1:1.0
[   13.788290] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
[   13.791167] sd 0:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[   13.796583] sd 0:0:0:0: [sda] Write Protect is off
[   13.802984] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   13.805058] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   13.825659]  sda: sda1
[   13.828980] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   21.379474] mount_root: loading kmods from internal overlay
[   21.414454] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   21.416854] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   23.945714] jffs2_scan_eraseblock(): End of filesystem marker found at 0x20000
[   23.945754] jffs2_build_filesystem(): unlocking the mtd device... 
[   23.945756] done.
[   23.957977] jffs2_build_filesystem(): erasing all blocks after the end marker... 
[  106.359240] done.
[  106.365697] jffs2: notice: (162) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  106.368986] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[  106.383247] block: unable to load configuration (fstab: Entry not found)
[  106.389867] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[  106.396659] block: unable to load configuration (fstab: Entry not found)
[  106.403046] block: attempting to load /etc/config/fstab
[  106.410375] block: unable to load configuration (fstab: Entry not found)
[  106.414601] block: no usable configuration
[  106.589560] jffs2: notice: (160) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  110.917898] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[  110.918062] block: unable to load configuration (fstab: Entry not found)
[  110.923976] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[  110.930677] block: unable to load configuration (fstab: Entry not found)
[  110.936908] block: attempting to load /etc/config/fstab
[  110.943705] block: unable to load configuration (fstab: Entry not found)
[  110.948535] block: no usable configuration
[  110.959700] mount_root: overlay filesystem has not been fully initialized yet
[  110.968288] mount_root: switching to jffs2 overlay
[  110.982636] overlayfs: upper fs does not support tmpfile.
[  113.605175] urandom-seed: Seed file not found (/etc/urandom.seed)
[  113.658304] procd: - early -
[  113.658371] procd: - watchdog -
[  114.212016] procd: - watchdog -
[  114.212692] procd: - ubus -
[  114.436388] procd: - init -
[  114.886611] urngd: v1.0.2 started.
[  114.945914] kmodloader: loading kernel modules from /etc/modules.d/*
[  114.963681] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[  114.976031] Key type cifs.idmap registered
[  114.987776] NET: Registered protocol family 15
[  114.989247] Initializing XFRM netlink socket
[  114.992454] tun: Universal TUN/TAP device driver, 1.6
[  114.999225] **********************************************************
[  115.000480] * Driver    :NSS GMAC Driver - RTL v(3.72a)
[  115.006923] * Version   :1.0
[  115.012103] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[  115.015208] **********************************************************
[  115.375615] nss_driver - fw of size 536324  bytes copied to load addr: 40000000, nss_id : 0
[  115.376806] nss_driver - Turbo Support 1
[  115.382909] Supported Frequencies - 
[  115.382915] 733Mhz 
[  115.386943] 733Mhz 
[  115.390603] 733Mhz 
[  115.392316] 
[  115.396705] 953ef2eb: meminfo init succeed
[  115.425355] nss_driver - fw of size 218224  bytes copied to load addr: 40800000, nss_id : 1
[  115.425611] 54015dd5: meminfo init succeed
[  115.429664] node size 1 # items 2
[  115.432662] debugfs: File 'n2h' in directory 'stats' already present!
[  115.436668] memory: 0 0 (avl 489373696) items 2 active_cores 2
[  115.440113] debugfs: File 'qrfs' in directory 'stats' already present!
[  115.440119] debugfs: File 'c2c_tx' in directory 'stats' already present!
[  115.446485] 953ef2eb: nss core 0 booted successfully
[  115.452265] debugfs: File 'c2c_rx' in directory 'stats' already present!
[  115.470614] debugfs: File 'unaligned' in directory 'stats' already present!
[  115.478702] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[  115.480559] node size 1 # items 2
[  115.486680] gre: GRE over IPv4 demultiplexor driver
[  115.489876] memory: 0 0 (avl 489373696) items 2 active_cores 2
[  115.489891] 54015dd5: nss core 1 booted successfully
[  115.494071] ip_gre: GRE over IPv4 tunneling driver
[  115.511140] ip6_gre: GRE over IPv6 tunneling driver
[  115.516851] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[  115.708030] PPP generic driver version 2.4.2
[  115.708734] NET: Registered protocol family 24
[  115.715765] Mirror/redirect action on
[  115.720133] u32 classifier
[  115.720152]     input device check on
[  115.721946]     Actions configured
[  115.732017] fuse: init (API version 7.31)
[  115.734342] Loading modules backported from Linux version v5.8.18-0-gab435ce49bd1
[  115.735001] Backport generated by backports.git v5.8.18-1-0-ga630fd46
[  115.926287] wireguard: WireGuard 1.0.20201112 loaded. See www.wireguard.com for information.
[  115.926321] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[  115.950212] xt_time: kernel timezone is -0000
[  116.005372] ath10k_pci 0000:01:00.0: assign IRQ: got 38
[  116.005394] ath10k 5.8 driver, optimized for CT firmware, probing pci device: 0x40.
[  116.006114] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[  116.012007] ath10k_pci 0000:01:00.0: enabling bus mastering
[  116.012545] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  122.277697] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[  122.277744] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[  122.289229] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b36a12bf
[  122.728969] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[  123.879084] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  123.879117] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[  123.956411] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  123.956481] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  124.232526] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[  124.331597] ath: EEPROM regdomain sanitized
[  124.331614] ath: EEPROM regdomain: 0x64
[  124.331624] ath: EEPROM indicates we should expect a direct regpair map
[  124.331649] ath: Country alpha2 being used: 00
[  124.331658] ath: Regpair used: 0x64
[  124.336677] ath10k_pci 0001:01:00.0: assign IRQ: got 40
[  124.336713] ath10k 5.8 driver, optimized for CT firmware, probing pci device: 0x40.
[  124.339101] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[  124.343259] ath10k_pci 0001:01:00.0: enabling bus mastering
[  124.343902] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  125.388359] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[  125.388392] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[  125.398750] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b36a12bf
[  125.471492] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[  126.622856] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  126.622885] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[  126.701108] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  126.702918] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  126.927685] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[  127.081995] ath: EEPROM regdomain sanitized
[  127.082003] ath: EEPROM regdomain: 0x64
[  127.082008] ath: EEPROM indicates we should expect a direct regpair map
[  127.082019] ath: Country alpha2 being used: 00
[  127.082023] ath: Regpair used: 0x64
[  127.087047] kmodloader: done loading kernel modules from /etc/modules.d/*
[  139.204998] ECM init
[  139.205035] ECM database jhash random seed: 0x8a3e2d8a
[  139.206340] ECM init complete
[  143.264032] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
[  144.333507] br-lan: port 1(eth1) entered blocking state
[  144.333566] br-lan: port 1(eth1) entered disabled state
[  144.334253] device eth1 entered promiscuous mode
[  144.340214] br-lan: port 1(eth1) entered blocking state
[  144.340231] br-lan: port 1(eth1) entered forwarding state
[  144.850497] ipq8064-mdio 37000000.mdio eth0: 1000 Mbps Full Duplex
[  145.941731] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  145.942409] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  147.154146] ath: EEPROM regdomain: 0x8268
[  147.154152] ath: EEPROM indicates we should expect a country code
[  147.154156] ath: doing EEPROM country->regdmn map search
[  147.154161] ath: country maps to regdmn code: 0x37
[  147.154166] ath: Country alpha2 being used: PL
[  147.154170] ath: Regpair used: 0x37
[  147.154175] ath: regdomain 0x8268 dynamically updated by user
[  147.154196] ath: EEPROM regdomain: 0x8268
[  147.154198] ath: EEPROM indicates we should expect a country code
[  147.154202] ath: doing EEPROM country->regdmn map search
[  147.154205] ath: country maps to regdmn code: 0x37
[  147.154208] ath: Country alpha2 being used: PL
[  147.154211] ath: Regpair used: 0x37
[  147.154215] ath: regdomain 0x8268 dynamically updated by user
[  150.192719] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  150.192748] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[  150.268183] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  150.268904] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  150.618153] ath10k_pci 0000:01:00.0: rts threshold -1
[  150.618701] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[  150.619651] wlan0: Created a NSS virtual interface
[  150.622958] br-lan: port 2(wlan0) entered blocking state
[  150.622967] br-lan: port 2(wlan0) entered disabled state
[  150.623160] device wlan0 entered promiscuous mode
[  150.623266] br-lan: port 2(wlan0) entered blocking state
[  150.623276] br-lan: port 2(wlan0) entered forwarding state
[  150.625839] br-lan: port 2(wlan0) entered disabled state
[  150.788528] ath10k_pci 0000:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[  152.087356] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  152.087395] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[  152.164482] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  152.165256] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  152.561206] ath10k_pci 0001:01:00.0: rts threshold -1
[  152.561567] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[  152.561942] debugfs: File 'virt_if' in directory 'stats' already present!
[  152.572307] wlan1: Created a NSS virtual interface
[  152.589492] br-lan: port 3(wlan1) entered blocking state
[  152.589505] br-lan: port 3(wlan1) entered disabled state
[  152.589808] device wlan1 entered promiscuous mode
[  153.062529] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  153.062771] br-lan: port 3(wlan1) entered blocking state
[  153.062780] br-lan: port 3(wlan1) entered forwarding state
[  153.071901] br-guest: port 1(wlan1-1) entered blocking state
[  153.071912] br-guest: port 1(wlan1-1) entered disabled state
[  153.072119] device wlan1-1 entered promiscuous mode
[  153.074944] ath10k_pci 0001:01:00.0: rts threshold -1
[  153.082308] debugfs: File 'virt_if' in directory 'stats' already present!
[  153.082762] wlan1-1: Created a NSS virtual interface
[  153.082878] br-guest: port 1(wlan1-1) entered blocking state
[  153.082885] br-guest: port 1(wlan1-1) entered forwarding state
[  153.091500] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  154.092437] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[  154.092920] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[  154.096447] br-guest: port 2(wlan1-2) entered blocking state
[  154.096460] br-guest: port 2(wlan1-2) entered disabled state
[  154.096755] device wlan1-2 entered promiscuous mode
[  154.098195] ath10k_pci 0001:01:00.0: rts threshold -1
[  154.101908] debugfs: File 'virt_if' in directory 'stats' already present!
[  154.102255] wlan1-2: Created a NSS virtual interface
[  154.102400] br-guest: port 2(wlan1-2) entered blocking state
[  154.102412] br-guest: port 2(wlan1-2) entered forwarding state
[  154.108415] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  155.153893] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-2: link becomes ready
[  155.168947] ath10k_pci 0001:01:00.0: rts threshold -1
[  155.172115] debugfs: File 'virt_if' in directory 'stats' already present!
[  155.172458] wlan1-3: Created a NSS virtual interface
[  155.248637] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  156.256612] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-3: link becomes ready
[  156.664130] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  156.664283] br-lan: port 2(wlan0) entered blocking state
[  156.664292] br-lan: port 2(wlan0) entered forwarding state
[  161.351194] br-lan: port 4(tap1) entered blocking state
[  161.351206] br-lan: port 4(tap1) entered disabled state
[  161.351399] device tap1 entered promiscuous mode
[  161.351493] br-lan: port 4(tap1) entered blocking state
[  161.351503] br-lan: port 4(tap1) entered forwarding state
[  185.619371] device wlan0 left promiscuous mode
[  185.619477] br-lan: port 2(wlan0) entered disabled state
[  185.650983] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
[  185.652206] wlan0: Destroyed NSS virtual interface
[  185.652791] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[  185.652820] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[  185.918973] wlan1-3: Destroyed NSS virtual interface
[  185.919695] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 3
[  185.919765] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 3
[  186.024172] ath10k_pci 0001:01:00.0: No VIF found for vdev 2
[  186.024198] ath10k_pci 0001:01:00.0: wmi-event-beacon-tx, could not find vdev for id: 2
[  186.070051] wlan1-2: Destroyed NSS virtual interface
[  189.130287] ath10k_pci 0001:01:00.0: WARNING: failed to wait for beacon tx callback for vdev 2: 0
[  189.130621] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
[  189.138336] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
[  189.139040] br-guest: port 2(wlan1-2) entered disabled state
[  189.158316] device wlan1-2 left promiscuous mode
[  189.158339] br-guest: port 2(wlan1-2) entered disabled state
[  189.380957] ath10k_pci 0001:01:00.0: No VIF found for vdev 1
[  189.381004] ath10k_pci 0001:01:00.0: no vif for vdev_id 1 found
[  189.391019] wlan1-1: Destroyed NSS virtual interface
[  189.391375] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 1
[  189.392022] br-guest: port 1(wlan1-1) entered disabled state
[  189.404494] device wlan1-1 left promiscuous mode
[  189.404523] br-guest: port 1(wlan1-1) entered disabled state
[  189.589461] device wlan1 left promiscuous mode
[  189.589562] br-lan: port 3(wlan1) entered disabled state
[  189.632374] ath10k_pci 0001:01:00.0: mac flush null vif, drop 0 queues 0xffff
[  189.634383] wlan1: Destroyed NSS virtual interface
[  189.634970] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[  189.635036] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[  191.376920] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  191.376950] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[  191.453956] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  191.453968] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  191.807302] ath10k_pci 0000:01:00.0: rts threshold -1
[  191.808236] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[  191.809732] debugfs: File 'virt_if' in directory 'stats' already present!
[  191.818844] wlan0: Created a NSS virtual interface
[  191.834666] br-lan: port 2(wlan0) entered blocking state
[  191.834676] br-lan: port 2(wlan0) entered disabled state
[  191.834944] device wlan0 entered promiscuous mode
[  192.549558] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  192.549748] br-lan: port 2(wlan0) entered blocking state
[  192.549756] br-lan: port 2(wlan0) entered forwarding state
[  194.343863] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[  194.343891] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[  194.422444] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[  194.423242] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
[  194.806177] ath10k_pci 0001:01:00.0: rts threshold -1
[  194.806712] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[  194.807222] debugfs: File 'virt_if' in directory 'stats' already present!
[  194.817562] wlan1: Created a NSS virtual interface
[  194.833176] br-lan: port 3(wlan1) entered blocking state
[  194.833188] br-lan: port 3(wlan1) entered disabled state
[  194.833472] device wlan1 entered promiscuous mode
[  195.305609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  195.305791] br-lan: port 3(wlan1) entered blocking state
[  195.305799] br-lan: port 3(wlan1) entered forwarding state
[  195.314624] br-guest: port 1(wlan1-1) entered blocking state
[  195.314635] br-guest: port 1(wlan1-1) entered disabled state
[  195.314828] device wlan1-1 entered promiscuous mode
[  195.316249] ath10k_pci 0001:01:00.0: rts threshold -1
[  195.323487] debugfs: File 'virt_if' in directory 'stats' already present!
[  195.323776] wlan1-1: Created a NSS virtual interface
[  195.323897] br-guest: port 1(wlan1-1) entered blocking state
[  195.323906] br-guest: port 1(wlan1-1) entered forwarding state
[  195.332291] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  196.333664] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[  196.334084] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[  196.341719] br-guest: port 2(wlan1-2) entered blocking state
[  196.341732] br-guest: port 2(wlan1-2) entered disabled state
[  196.341964] device wlan1-2 entered promiscuous mode
[  196.344532] ath10k_pci 0001:01:00.0: rts threshold -1
[  196.347681] debugfs: File 'virt_if' in directory 'stats' already present!
[  196.348050] wlan1-2: Created a NSS virtual interface
[  196.348188] br-guest: port 2(wlan1-2) entered blocking state
[  196.348200] br-guest: port 2(wlan1-2) entered forwarding state
[  196.353799] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  197.384495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-2: link becomes ready
[  197.402266] ath10k_pci 0001:01:00.0: rts threshold -1
[  197.405365] debugfs: File 'virt_if' in directory 'stats' already present!
[  197.405730] wlan1-3: Created a NSS virtual interface
[  197.477874] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
[  198.493332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-3: link becomes ready
[  311.930603] ath10k_pci 0000:01:00.0: htt tx: fixing invalid VHT TX rate code 0xff