Skip to content

Instantly share code, notes, and snippets.

@indywidualny
Last active Oct 14, 2020
Embed
What would you like to do?
/etc/dhcpcd.conf
# See dhcpcd.conf(5) for details.
# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
noipv4ll
# Static profile
interface enp3s0
static ip_address=192.168.0.25/24
static routers=192.168.0.1
static domain_name_servers=8.8.8.8 8.8.4.4
@sagar23nov
Copy link

sagar23nov commented Oct 14, 2020

Thank you for sharing.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment