dmesg

[    1.801067] c2      1 hidraw: raw HID events driver (C) Jiri Kosina
[    1.801342] c2      1 usbcore: registered new interface driver usbhid
[    1.801349] c2      1 usbhid: USB HID core driver
[    1.801962] c2      1 ashmem: initialized
[    1.980403] c1      6 [TP]:fwu_start_reflash: Start of reflash process
[    2.423395] c0    249 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 1
[    2.504739] c2      1 nanohub: loaded; ret=0
[    2.504884] c2      1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[    2.517745] c2      1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    2.519523] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
[    2.519571] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
[    2.522430] c2      1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
[    2.526876] c3      1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    2.527014] c3      1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[    2.527143] c3      1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
[    2.527268] c3      1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
[    2.532019] c3      1 Trustonic TEE: MobiCore mcDrvModuleApi version is 2.1
[    2.532030] c3      1 Trustonic TEE: MobiCore t-base-QC-MSM8996-Android-302B-V001-20150529_084320_16
[    2.533880] c3      1 [NC] == NC_probe ==
[    2.533892] c3      1 [NC] Init GPIO pins
[    2.534175] c3      1 usbcore: registered new interface driver snd-usb-audio
[    2.535643] c3      1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
[    2.535688] c3      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
[    2.536098] c3      1 tfa98xx_i2c_probe(): TFA9891 detected
[    2.536115] c3      1 tfa98xx 7-0034: Skipping IRQ registration
[    2.536239] c3      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
[    2.537115] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.537197] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.549679] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[    2.549975] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[    2.549985] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.550220] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
[    2.550230] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.550416] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
[    2.550425] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.550609] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
[    2.550619] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.550644] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[    2.550821] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[    2.550831] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551012] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
[    2.551022] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551206] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
[    2.551216] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551399] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
[    2.551409] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551434] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[    2.551611] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[    2.551620] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551803] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
[    2.551812] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.551992] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
[    2.552001] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.552183] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
[    2.552193] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.552218] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[    2.552394] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[    2.552403] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.552582] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
[    2.552591] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.552775] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
[    2.552784] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.552961] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
[    2.552970] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.555686] c3      1 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[    2.565966] c3      1 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.565978] c3      1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.565988] c3      1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.566038] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.566062] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.566085] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.566108] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.566130] c3      1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.567908] c3      1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.570103] c3      1 GACT probability NOT on
[    2.570120] c3      1 Mirror/redirect action on
[    2.570136] c3      1 u32 classifier
[    2.570140] c3      1     Actions configured
[    2.570159] c3      1 Netfilter messages via NETLINK v0.30.
[    2.570191] c3      1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.570371] c3      1 ctnetlink v0.93: registering with nfnetlink.
[    2.570717] c3      1 xt_time: kernel timezone is -0000
[    2.570872] c3      1 ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.570957] c3      1 arp_tables: (C) 2002 David S. Miller
[    2.570990] c3      1 TCP: cubic registered
[    2.570998] c3      1 Initializing XFRM netlink socket
[    2.571217] c3      1 NET: Registered protocol family 10
[    2.571803] c2      1 mip6: Mobile IPv6
[    2.571824] c2      1 ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.571909] c2      1 sit: IPv6 over IPv4 tunneling driver
[    2.572180] c2      1 NET: Registered protocol family 17
[    2.572199] c2      1 NET: Registered protocol family 15
[    2.572228] c2      1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.572244] c2      1 Bridge firewalling registered
[    2.572251] c2      1 Ebtables v2.0 registered
[    2.572429] c2      1 Bluetooth: ffffffc0f983fcb8
[    2.572438] c2      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fce8
[    2.572470] c2      1 Bluetooth: ffffffc0f983fcc8Bluetooth: ffffffc0f983fcc8
[    2.572481] c2      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fd18
[    2.572493] c2      1 Bluetooth: ffffffc0f983fcf8<6>[    2.572525] c2      1 l2tp_core: L2TP core driver, V2.0
[    2.572537] c2      1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.572544] c2      1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.572563] c2      1 l2tp_netlink: L2TP netlink interface
[    2.572581] c2      1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.572597] c2      1 l2tp_debugfs: L2TP debugfs support
[    2.572604] c2      1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.573819] c2      1 NET: Registered protocol family 27
[    2.575811] c1    258 usb_otg_vreg: no parameters
[    2.575867] c1    258 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    2.575938] c1    258 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    2.578960] c1    258 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
[    2.580112] c1    258 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
[    2.581425] c1    258 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
[    2.582090] c1    258 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
[    2.585248] c1    258 sps:BAM 0x0000000006b04000 is registered.
[    2.586988] c1    258 qpnp-smbcharger qpnp-smbcharger-ffffffc0f928b800: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.587018] c1    258 SMBCHG: smbchg_check_chg_version: PMI8996 version = v1.1
[    2.587186] c1    258 smbcharger_charger_otg: no parameters
[    2.587340] c1    258 smbcharger_external_otg: no parameters
[    2.587382] c1    258 smbcharger_external_otg: supplied by pmi8994_boost_5v
[    2.587830] c1    258 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.587857] c1    258 SMBCHG: usb_suspend: 7 voting for 0 - off
[    2.588269] c1    258 SMBCHG: usb_suspend: 0 voting for 0 - off
[    2.588277] c1    258 SMBCHG: dc_suspend: 0 voting for 0 - off
[    2.588340] c1    258 SMBCHG: dcl_icl: 0 voting for 1500 - on
[    2.588383] c1    258 SMBCHG: fcc: 1 voting for 3200 - on
[    2.588559] c1    258 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
[    2.588567] c1    258 SMBCHG: hwaicl_disable: 0 voting for 0 - off
[    2.610161] c1    258 SMBCHG: hwaicl_disable: 1 voting for 0 - off
[    2.610170] c1    258 SMBCHG: usb_suspend: 6 voting for 0 - off
[    2.610235] c1    258 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.610242] c1    258 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.610396] c1    258 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
[    2.612673] c1    258 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
[    2.612924] c1    258 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
[    2.634026] c1    334 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
[    2.640813] c1    258 qpnp-smbcharger qpnp-smbcharger-ffffffc0f928b800: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.640835] c1    258 smbchg_debug_mask=0x6
[    2.640860] c1    334 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.640901] c1    334 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
[    2.640909] c1    334 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.640916] c1    334 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.640922] c1    334 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.640950] c1    334 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.640968] c1    334 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    2.640975] c1    334 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.641004] c0    355 SMBCHG: power_ok_handler: triggered: 0x00. prev_power_ok(-1) power_ok(0) 
[    2.641022] c1    334 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    2.641292] c1    258 SMBCHG: rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
[    2.644496] c1    258 qpnp-smbcharger qpnp-smbcharger-ffffffc0f928b800: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
[    2.644504] c1    258 [BATT] Probe process: (0, 2)
[    2.644558] c1    258 SMBCHG: handle_usb_insertion: triggered
[    2.644584] c1    258 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
[    2.644589] c1    258 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
[    2.644597] c1    258 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.644603] c1    258 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
[    2.644608] c1    258 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.644704] c0    355 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(0) power_ok(1) 
[    2.644711] c1    258 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
[    2.644723] c1    258 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    2.644807] c1    278 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.644816] c1    278 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.644822] c1    278 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.644827] c1    278 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.644853] c1    278 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.644870] c1    278 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.644903] c0    355 SMBCHG: power_ok_handler: triggered: 0x00.
[    2.645498] c1    258 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
[    2.645498] c1     13 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.645521] c1     13 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.645899] c1    258 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
[    2.698068] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.698083] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.698095] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.698209] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.698245] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.698280] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.698314] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.698349] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.700589] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.701024] c1    258 usb_otg_vreg: no parameters
[    2.701066] c1    258 usb_otg_vreg: supplied by smbcharger_external_otg
[    2.702605] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.702619] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.702632] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.702739] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.702776] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.702811] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.702845] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.702880] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.705175] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.706032] c2      1 Loading compiled-in X.509 certificates
[    2.706329] c2      1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
[    2.706573] c2      1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
[    2.706827] c2      1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[    2.707061] c2      1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
[    2.707755] c2      1 Key type encrypted registered
[    2.744920] c2      1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
[    2.744997] c2      1 adsprpc: channel link type: 0
[    2.754590] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.754605] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.754617] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.754724] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.754761] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.754796] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.754831] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.754867] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.757081] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.758593] c2      1 RNDIS_IPA module is loaded.
[    2.759160] c2      1 file system registered
[    2.759201] c2      1 mbim_init: initialize 1 instances
[    2.759246] c2      1 mbim_init: Initialized 1 ports
[    2.759514] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.759525] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.759537] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.759668] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.759704] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.759738] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.759771] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.759805] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.760199] c2      1 rndis_qc_init: initialize rndis QC instance
[    2.760346] c2      1 Number of LUNs=8
[    2.760355] c2      1 Mass Storage Function, version: 2009/09/11
[    2.760361] c2      1 LUN: removable file: (no medium)
[    2.760375] c2      1 Number of LUNs=1
[    2.760410] c2      1 LUN: removable file: (no medium)
[    2.760415] c2      1 Number of LUNs=1
[    2.760581] c2      1 android_usb gadget: android_usb ready
[    2.762179] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.763883] c2      1 [KEY] keycode = 115, gpio = 126, irq = 481
[    2.763927] c2      1 [KEY] keycode = 116, gpio = 40, irq = 395[KEY] keycode = 114, gpio = 121, irq = 476
[    2.764088] c2      1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
[    2.764228] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.764239] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.764250] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.764373] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.764412] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.764448] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.764485] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.764521] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.764935] c2      1 qcom,qpnp-rtc qpnp-rtc-ffffffc0f9289800: setting system clock to 1970-05-30 15:56:28 UTC (12930988)
[    2.766972] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.768886] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.768899] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.768911] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.769026] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.769064] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.769101] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.769138] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.769177] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.771660] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.773975] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.773992] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.774006] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.774070] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
[    2.774178] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.774218] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.774333] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.774366] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
[    2.774407] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.774447] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.774561] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
[    2.774735] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
[    2.774907] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
[    2.775095] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
[    2.775282] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
[    2.775459] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
[    2.777299] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.778179] c2      1 parse_cpu_levels: idx 1 545
[    2.778189] c2      1 parse_cpu_levels: idx 2 6022
[    2.778193] c2      1 parse_cpu_levels: idx 2 11499
[    2.778274] c2      1 parse_cpu_levels: idx 1 545
[    2.778279] c2      1 parse_cpu_levels: idx 2 6022
[    2.778283] c2      1 parse_cpu_levels: idx 2 11499
[    2.779109] c1    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.779121] c1    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.779132] c1    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.779255] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.779292] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.779328] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.779364] c1    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.779401] c1    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.781840] c1    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.782345] c2      1 [FLT] qpnp_flash_led_probe: ++
[    2.782497] c2      1 [FLT] flash_strobe = 22
[    2.782511] c2      1 qcom,qpnp-flash-led qpnp-flash-led-ffffffc0f9295c00: Unable to acquire pinctrl
[    2.783546] c2      1 [FLT] qpnp_flash_led_probe: --
[    2.783561] c3    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.783568] c3    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.783577] c3    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.783627] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.783651] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.783673] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.783695] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.783717] c3    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.785444] c2      1 rmnet_ipa started initialization
[    2.785454] c2      1 IPA SSR support = True
[    2.785459] c2      1 IPA ipa-loaduC = True
[    2.785463] c2      1 IPA SG support = True
[    2.785541] c3    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.787185] c3    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.787196] c3    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.787206] c3    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.787254] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.787277] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.787300] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.787322] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.787345] c3    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.787415] c2      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    2.787421] c2      1 ipa ipa2_uc_state_check:301 uC is not loaded
[    2.788209] c2      1 rmnet_ipa completed initialization
[    2.789145] c3    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.790547] c3    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.790559] c3    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.790569] c3    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.790617] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.790640] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.790663] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.790685] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.790708] c3    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.792299] c2      1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
[    2.792453] c3    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.793164] c2      1 usb_otg_vreg: disabling
[    2.793214] c2      1 rome_vreg: disabling
[    2.793219] c2      1 gdsc_mmagic_bimc: disabling
[    2.793255] c2      1 kryo1-retention: disabling
[    2.793260] c2      1 kryo0-retention: disabling
[    2.793265] c2      1 gfx_mem_acc_corner: disabling
[    2.793269] c2      1 apcc_l3_mem_acc_corner: disabling
[    2.793274] c2      1 apc1_perfcl_mem_acc_corner: disabling
[    2.793278] c2      1 apc0_pwrcl_mem_acc_corner: disabling
[    2.793287] c2      1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[    2.793664] c2      1 clock_late_init: Removing enables held for handed-off clocks
[    2.793941] c3    258 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.793949] c3    258 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.793958] c3    258 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.794002] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.794026] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.794049] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.794071] c3    258 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.794093] c3    258 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.795831] c3    258 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.798080] c2      1 ALSA device list:
[    2.798087] c2      1   No soundcards found.
[    2.798143] c2      1 Warning: unable to open an initial console.
[    2.798163] c2      1 dm: attempting early device configuration.
[    2.798686] c2      1 device-mapper: init: adding target '0 1 android-verity 259:17    '
[    2.798699] c2      1 device-mapper: android-verity: key:id:7e4333f9bba00adfe0ede979e28ed1920492b40f dev:259:17
[    2.800691] c2      1 device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:236
[    2.800697] c2      1 device-mapper: android-verity: Mounting root with verity disabled
[    2.800703] c2      1 device-mapper: android-verity: verity_table: 1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 516099 516099 sha256 730603c28252a22af27050b75ed250b951b8c6884bd952fef1c22f4d35657ff6 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7
[    2.800720] c2      1 device-mapper: android-verity: Data sectors 4128792
[    2.800753] c2      1 device-mapper: android-verity: Added android-verity as a linear target
[    2.800903] c2      1 device-mapper: table: 253:0: adding target device sda33 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    2.800912] c2      1 device-mapper: table: 253:0: adding target device sda33 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    2.800976] c2      1 dm: dm-0 is ready
[    2.801387] c2      1 EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[    2.801612] c2      1 EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
[    2.803858] c2      1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.803882] c2      1 VFS: Mounted root (ext4 filesystem) readonly on device 253:0.
[    2.803978] c2      1 Freeing unused kernel memory: 492K (ffffffc0014bd000 - ffffffc001538000)
[    2.804001] c2      1 Freeing alternatives memory: 76K (ffffffc001538000 - ffffffc00154b000)
[    2.810444] c2      1 init: init first stage started!
[    2.814176] c2      1 SELinux: 2048 avtab hash slots, 8922 rules.
[    2.816395] c2      1 SELinux: 2048 avtab hash slots, 8922 rules.
[    2.816407] c2      1 SELinux:  1 users, 2 roles, 850 types, 0 bools, 1 sens, 1024 cats
[    2.816413] c2      1 SELinux:  63 classes, 8922 rules
[    2.817245] c2      1 SELinux:  Class can_socket not defined in policy.
[    2.817258] c2      1 SELinux: the above unknown classes and permissions will be denied
[    2.817276] c2      1 SELinux:  Completing initialization.
[    2.817279] c2      1 SELinux:  Setting up existing superblocks.
[    2.817290] c2      1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.817302] c2      1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
[    2.817312] c2      1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.817329] c2      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.817342] c2      1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.848892] c2      1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.848906] c2      1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.848914] c2      1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[    2.848920] c2      1 SELinux: initialized (dev aio, type aio), not configured for labeling
[    2.848928] c2      1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.848942] c2      1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    2.848952] c2      1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.849023] c2      1 SELinux: initialized (dev dm-0, type ext4), uses xattr
[    2.849083] c2      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.849099] c2      1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.852742] c3      1 audit: type=1403 audit(12930988.583:2): policy loaded auid=4294967295 ses=4294967295
[    2.853420] c3      1 audit: type=1404 audit(12930988.586:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.853795] c3      1 init: (Initializing SELinux enforcing took 0.04s.)
[    2.856508] c3      1 init: init second stage started!
[    2.860908] c3      1 init: Running restorecon...
[    3.081048] c3      1 init: waitpid failed: No child processes
[    3.082565] c3      1 init: (Loading properties from /default.prop took 0.00s.)
[    3.084458] c3      1 init: (Parsing /init.environ.rc took 0.00s.)
[    3.085520] c3      1 init: (Parsing /init.usb.rc took 0.00s.)
[    3.086625] c3      1 init: ignored duplicate definition of service 'hci_filter_root'init: (Parsing init.marlin.nanohub.rc took 0.00s.)
[    3.087456] c3      1 init: (Parsing init.marlin.usb.rc took 0.00s.)
[    3.087809] c3      1 init: (Parsing init.common.diag.rc took 0.00s.)
[    3.087821] c3      1 init: (Parsing /init.marlin.rc took 0.00s.)
[    3.088390] c3      1 init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    3.088665] c3      1 init: (Parsing /init.zygote64_32.rc took 0.00s.)
[    3.089239] c3      1 init: (Parsing /init.cm.rc took 0.00s.)
[    3.089253] c3      1 init: (Parsing /init.rc took 0.01s.)
[    3.089919] c3      1 init: Starting service 'ueventd'...
[    3.090402] c3      1 init: Waiting for /dev/.coldboot_done...
[    3.092015] c0    402 ueventd: ueventd started!
[    3.146747] c1    334 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.146786] c1    334 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.146793] c1    334 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    3.270699] c1    261 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=22213, raw_min=0, raw_max=16000.
[    3.270714] c1    261 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=22213, raw_min=27501, raw_max=40000.
[    3.270723] c1    261 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id3-batterydata, id_ohm=22213, raw_min=16001, raw_max=27500.
[    3.270739] c1    261 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
[    3.270745] c1    261 FG: fg_batt_profile_init: batt_fcc_ma = 3400
[    3.270751] c1    261 FG: fg_batt_profile_init: batt_capacity_mah = 3450
[    3.270757] c1    261 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
[    3.274667] c1    261 SMBCHG: battchg_suspend: 0 voting for 0 - on
[    3.426725] c0    249 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 2
[    3.426747] c0    249 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.553926] c1    249 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x3), pd_state(0x0), retry: 0
[    3.553940] c1    249 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.555503] c1    249 FUSB platform_notify_cc_orientation: orientation=[2], CC1=[0], CC2=[2]
[    3.650075] c1    334 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.650113] c1    334 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.676040] c2    402 ueventd: Coldboot took 0.58s.
[    3.676373] c0      1 init: Waiting for /dev/.coldboot_done took 0.59s.
[    3.677075] c0      1 keychord: using input dev qpnp_pon for fevent
[    3.677086] c0      1 keychord: using input dev HDMI CEC User or Deck Control for fevent
[    3.677094] c0      1 keychord: using input dev qbt1000_key_input for fevent
[    3.677123] c0      1 keychord: using input dev gpio-keys for fevent
[    3.677185] c0      1 init: console init failed. Open on Console device ttyHSL0 failed(No such file or directory)
[    3.677887] c0      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.678470] c0      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.679495] c0      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.682554] c0      1 init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[    3.682598] c0      1 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[    3.684053] c0      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.685222] c0      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.689942] c0      1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    3.690300] c0      1 Registered swp emulation handler
[    3.698121] c1    404 EXT4-fs (sda31): mounted filesystem with ordered data mode. Opts: barrier=1,discard
[    3.698150] c1    404 SELinux: initialized (dev sda31, type ext4), uses xattr
[    3.698280] c1    404 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/vendor_a,target=/vendor,type=ext4)=0
[    3.701132] c0      6 [TP]:fwu_go_nogo: Device firmware ID = 2433782
[    3.701147] c0      6 [TP]:fwu_go_nogo: Image firmware ID = 2433782
[    3.701153] c0      6 [TP]:fwu_go_nogo: Image firmware ID is the same as device firmware ID
[    3.701159] c0      6 [TP]:fwu_go_nogo: No need to do reflash
[    3.701173] c0      6 [TP]:synaptics_rmi4_reset_device from synaptics_fw_updater+0x458/0x6e8, rebuild = 0
[    3.701852] c0    400 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    3.701860] c0    400 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[    3.701876] c0    400 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[    3.701888] c0    400 ->action():           (null)
[    3.701893] c0    400    IRQ_NOPROBE set
[    3.701898] c0    400  IRQ_NOREQUEST set
[    3.701902] c0    400   IRQ_NOTHREAD set
[    3.702192] c0    404 SELinux: initialized (dev sda25, type vfat), uses mountpoint labeling
[    3.702242] c0    404 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem_a,target=/firmware/radio,type=vfat)=0
[    3.704159] c1      1 init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[    3.704613] c1      1 init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[    3.704967] c1      1 init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[    3.705331] c1      1 init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[    3.705860] c1      1 init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[    3.706380] c1      1 init: (Parsing /system/etc/init/cppreopts.rc took 0.00s.)
[    3.706811] c1      1 init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[    3.707166] c1      1 init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[    3.707676] c1      1 init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[    3.708205] c1      1 init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[    3.708577] c1      1 init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[    3.708930] c1      1 init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
[    3.709382] c1      1 init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[    3.709724] c1      1 init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[    3.710159] c1      1 init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[    3.710688] c1      1 init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
[    3.711206] c1      1 init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[    3.711624] c1      1 init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[    3.712001] c1      1 init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[    3.712346] c1      1 init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[    3.712696] c1      1 init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[    3.713212] c1      1 init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[    3.713742] c1      1 init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[    3.714106] c1      1 init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[    3.714493] c1      1 init: (Parsing /system/etc/init/otapreopt.rc took 0.00s.)
[    3.714992] c1      1 init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
[    3.715445] c1      1 init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[    3.715811] c1      1 init: (Parsing /system/etc/init/recovery-persist.rc took 0.00s.)
[    3.716146] c1      1 init: (Parsing /system/etc/init/recovery-refresh.rc took 0.00s.)
[    3.716549] c1      1 init: (Parsing /system/etc/init/rild.rc took 0.00s.)
[    3.717103] c1      1 init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[    3.717492] c1      1 init: (Parsing /system/etc/init/superuser.rc took 0.00s.)
[    3.717884] c1      1 init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[    3.718343] c1      1 init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[    3.718820] c1      1 init: (Parsing /system/etc/init/update_engine.rc took 0.00s.)
[    3.719213] c1      1 init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[    3.719570] c1      1 init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[    3.721180] c1      1 zram0: detected capacity change from 0 to 536870912
[    3.729542] c1    407 random: mkswap urandom read with 113 bits of entropy available
[    3.732648] c0      6 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
[    3.733311] c0      6 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
[    3.733608] c1      6 [TP]:synaptics_rmi4_f12_init report data init done
[    3.742407] c0      6 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    3.743558] c0      6 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
[    3.750344] c0      6 [TP]:fwu_start_reflash: End of reflash process
[    3.750358] c0      6 [TP]:synaptics_config_updater
[    3.751408] c0      6 [TP]:synaptics_config_updater: Device config ID = 4d31763200180000000000000000000000000000000000000000000000000000
[    3.751421] c0      6 [TP]:synaptics_config_updater: Start of write config process
[    3.772911] c1      1 Adding 524284k swap on /dev/block/zram0.  Priority:-1 extents:1 across:524284k SS
[    3.775197] c1      1 EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.775228] c1      1 SELinux: initialized (dev sdd3, type ext4), uses xattr
[    3.777498] c1      1 audit: type=1400 audit(12930989.510:4): avc:  denied  { write } for  pid=1 comm="init" name="tracing_on" dev="debugfs" ino=7000 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[    3.777531] c1      1 init: write_file: Unable to open '/sys/kernel/debug/tracing/tracing_on': Permission denied
[    3.778967] c1      1 init: Starting service 'logd'...
[    3.779690] c1      1 EXT4-fs (dm-0): re-mounted. Opts: (null)
[    3.801680] c0    410 logd.auditd: start
[    3.801859] c0    410 logd.klogd: 3801825220
[    3.804859] c1      6 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x2
[    3.804881] c1      6 [TP]:synaptics_config_updater: Image config ID = 4d31763200180000000000000000000000000000000000000000000000000000
[    3.804891] c1      6 [TP]:synaptics_config_updater: config_size = 2048
[    3.804901] c1      6 [TP]: synaptics_config_updater: crc_cksum = 66A6880E
[    3.806625] c1      6 [TP]: crc_comparison_v7: config_crc = 66A6880E, flash_crc = 66A6880E
[    3.806639] c1      6 [TP]: synaptics_config_updater: No need to update
[    3.806661] c1      6 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x730/0xa38, rebuild = 0
[    3.807380] c0    410 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    3.807390] c0    410 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[    3.807405] c0    410 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[    3.807417] c0    410 ->action():           (null)
[    3.807423] c0    410    IRQ_NOPROBE set
[    3.807427] c0    410  IRQ_NOREQUEST set
[    3.807432] c0    410   IRQ_NOTHREAD set
[    3.838999] c0      6 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
[    3.839688] c0      6 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
[    3.839978] c0      6 [TP]:synaptics_rmi4_f12_init report data init done
[    3.848508] c0      6 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    3.849506] c0      6 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
[    3.855726] c0      6 [TP]:synaptics_config_updater: End of write config process
[    3.855740] c0      6 [TP]: synaptics_config_updater end
[    3.948216] c0      0 random: nonblocking pool is initialized
[    4.072509] c1    249 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    4.076490] c2      1 init: Starting service 'qseecomd'...
[    4.077095] c2      1 init: Starting service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)'...
[    4.138543] c0    418 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[    4.156808] c0    417 type=1400 audit(12930989.886:5): avc: denied { search } for pid=421 comm="qseecomd" name="firmware" dev="dm-0" ino=24 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.203100] c3      1 init: Service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)' (pid 419) exited with status 0
[    4.203479] c3      1 init: Starting service 'flash-nanohub-fw'...
[    4.204208] c3      1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[    4.204522] c3      1 init: Starting service 'exec 2 (/system/bin/recovery-refresh)'...
[    4.216799] c3      1 init: Service 'exec 2 (/system/bin/recovery-refresh)' (pid 433) exited with status 254
[    4.219285] c3      1 init: (Loading properties from /system/build.prop took 0.00s.)
[    4.219609] c3      1 init: (Loading properties from /vendor/build.prop took 0.00s.)
[    4.219640] c3      1 init: (Loading properties from /factory/factory.prop took 0.00s.)
[    4.219781] c3      1 init: /recovery not specified in fstab
[    4.222303] c3      1 subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
[    4.290780] c0    417 type=1400 audit(12930990.023:6): avc: denied { search } for pid=432 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=24 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.291446] c0    417 type=1400 audit(12930990.023:7): avc: denied { search } for pid=432 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=24 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.291660] c0    417 type=1400 audit(12930990.023:8): avc: denied { search } for pid=432 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=24 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.508401] c3      1 subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
[    4.519426] c1    260 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.519441] c1    260 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.519453] c1    260 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.519742] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.519805] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.519902] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.519993] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.520085] c1    260 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.523242] c1    260 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.527818] c1    260 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.527834] c1    260 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.527846] c1    260 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.527985] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.528059] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.528107] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.528142] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.528177] c1    260 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.529949] c2    322 subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    4.529972] c0    241 subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
[    4.530006] c2    322 L-Notify: Generel: 7
[    4.530047] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.530143] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.531269] c1    260 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.534901] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000
[    4.540169] c0    266 apr_tal:Q6 Is Up
[    4.542934] c2    260 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: schedule_delayed_work with card_det_work
[    4.543040] c2    260 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.543047] c2    260 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.543057] c2    260 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.543112] c2    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.543153] c2    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.543177] c2    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.543199] c2    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.543222] c2    260 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.545323] c2    260 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.640715] c1      6 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[    4.641940] c0    260 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
[    4.648689] c1    334 sps:BAM 0x0000000009184000 (va:0xffffff8004c00000) enabled: ver:0x19, number of pipes:31
[    4.648709] c1    334 sps:BAM 0x0000000009184000 is registered.
[    4.650263] c0    375 wcd9335-slim tasha-slim-pgd: Platform data from device tree
[    4.650377] c0    375 wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
[    4.650405] c0    375 wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
[    4.650427] c0    375 wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.650450] c0    375 wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.650473] c0    375 wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    4.650499] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
[    4.650509] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.650519] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.650528] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.650539] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.650547] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.650555] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.650564] c0    375 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.650624] c0    375 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
[    4.652211] c1    260 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.652227] c1    260 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.652239] c1    260 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.652401] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.652451] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.652495] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.652659] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.652811] c1    260 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.656131] c1    260 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.686950] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
[    4.700211] c0    375 slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
[    4.700237] c1    260 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
[    4.700492] c0    375 slimbus:1 laddr:0xca, EAPC:0x0:0xa0
[    4.700690] c0    375 wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
[    4.701382] c1    375 wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
[    4.701398] c1    375 wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
[    4.714266] c1    375 tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
[    4.715827] c1    260 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.715843] c1    260 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.715855] c1    260 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.716012] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.716061] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.716177] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.716253] c1    260 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.716362] c1    260 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.721171] c1    260 tasha_codec tasha_codec: tasha_codec_probe()
[    4.736210] c3    260 [AUD] snd_soc_wcd_mbhc: [AUD][HS] register_attributes
[    4.736319] c3    260 wcd_mbhc_init: ret 0 --
[    4.737284] c3    260 tasha_codec tasha_codec: for cpe segments only will be dumped.
[    4.739946] c0    402 subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
[    4.740102] c0    326 subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
[    4.741036] c3     49 diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
[    4.741203] c2      6 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
[    4.744572] c3      1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
[    4.744950] c3      1 init: Starting service 'servicemanager'...
[    4.745868] c3      1 init: Starting service 'surfaceflinger'...
[    4.746533] c3      1 init: Starting service 'audioserver'...
[    4.747921] c3      1 init: Starting service 'bootanim'...
[    4.753380] c2    260 msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present
[    4.755175] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer
[    4.755185] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer
[    4.755206] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer
[    4.755212] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer
[    4.759969] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
[    4.759981] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
[    4.762499] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
[    4.762509] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
[    4.762943] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.762950] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.763728] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[    4.763738] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[    4.766396] c2    260 msm8996-asoc-snd soc:sound-9335: control 2:0:0:PRI_MI2S_RX Port Mixer SLIM_0_TX:0 is already present
[    4.766406] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget PRI_MI2S_RX Port Mixer dapm kcontrol PRI_MI2S_RX Port Mixer SLIM_0_TX: -16
[    4.771055] c1    474 EXT4-fs (sda35): Ignoring removed nomblk_io_submit option
[    4.798616] c2    260 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
[    4.822661] c3    474 EXT4-fs (sda35): 18 orphan inodes deleted
[    4.822707] c3    474 EXT4-fs (sda35): recovery complete
[    4.831869] c2    260 tfa98xx 7-0034: tfa98xx codec registered ()
[    4.833083] c3    474 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    4.833133] c3    474 SELinux: initialized (dev sda35, type ext4), uses xattr
[    4.833243] c3    474 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
[    4.833794] c2    260 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
[    4.833806] c2    260 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
[    4.833832] c2    260 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
[    4.833838] c2    260 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
[    4.834737] c2     81 tfa98xx 7-0034: Registered DSP instance with handle 0
[    4.836854] c3    474 fs_mgr: check_fs(): unmount(/data) succeeded
[    4.837066] c3    474 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
[    4.844663] c2    260 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: ++
[    4.844867] c2    260 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: --
[    4.844945] c2    260 [AUD] snd_soc_msm8996: msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
[    4.911609] c2    260 input: msm8996-tasha-marlin-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input7
[    4.911788] c2    260 input: msm8996-tasha-marlin-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input8
[    4.911837] c2    260 keychord: using input dev msm8996-tasha-marlin-snd-card Button Jack for fevent
[    4.913634] c2    260 msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-marlin-snd-card registered
[    4.913646] c2    260 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe:  cancel_delayed_work with card_det_work
[    4.913659] c2    260 msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335
[    4.913664] c2    260 [AUD] htc-acoustic: acoustic_register_ops 
[    4.913669] c2    260 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: probe successfully
[    5.079076] c0    417 type=1400 audit(12930990.810:9): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.079224] c0    417 type=1400 audit(12930990.810:10): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.079282] c0    417 type=1400 audit(12930990.810:11): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.084117] c0    417 type=1400 audit(12930990.816:12): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.084814] c0    417 type=1400 audit(12930990.816:13): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.085135] c0    417 type=1400 audit(12930990.816:14): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.088968] c0    417 type=1400 audit(12930990.820:15): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.089107] c0    417 type=1400 audit(12930990.820:16): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.089745] c0    417 type=1400 audit(12930990.820:17): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.093483] c0    417 type=1400 audit(12930990.823:18): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.093918] c0    417 type=1400 audit(12930990.823:19): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.097477] c0    470 kgsl: _read_fw2_block_header: GPMU unknown header ID 6
[    5.102965] c0    470 cpr3_regulator_measure_aging: gfx: average quotient delta=1 (count=10)
[    5.102992] c0    470 cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=338 uV
[    5.132140] c0    470 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: loading from 0x0000000090e00000 to 0x0000000090e02000
[    5.188341] c0    470 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: Brought out of reset
[    5.194991] c2    259 devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
[    5.277234] c1    249 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    5.280423] c1    334 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=22213, raw_min=0, raw_max=16000.
[    5.280440] c1    334 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=22213, raw_min=27501, raw_max=40000.
[    5.280449] c1    334 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id3-batterydata, id_ohm=22213, raw_min=16001, raw_max=27500.
[    5.280525] c1    334 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
[    5.280533] c1    334 FG: fg_batt_profile_init: batt_fcc_ma = 3400
[    5.280550] c1    334 FG: fg_batt_profile_init: batt_capacity_mah = 3450
[    5.280557] c1    334 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
[    5.285406] c1    334 SMBCHG: battchg_suspend: 0 voting for 0 - off
[    5.291143] c1    334 FG: fg_batt_profile_init: Battery SOC: 100, V: 4395421uV
[    5.291155] c1    334 [BATT] Probe process: (1, 3)
[    5.291177] c1    334 [BATT] htc_battery_probe_process: catch name 3, set batt id=3, full_ma=345, fcc_ma=3400, capacity=3450, half_capacity_ma:1600, pd_is_limited:0, batt_eoc_current_ma:100
[    5.291183] c1    334 [BATT] Probe process done.
[    5.291340] c1    261 SMBCHG: battchg_suspend: 1 voting for 0 - off
[    5.291481] c1    261 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.291493] c2    259 [BATT] batt_worker: total_time since last batt update = 14316262943 ms.
[    5.291494] c1    261 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.291652] c1    278 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.294167] c2    259 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
[    5.294175] c2    259 [BATT] read_batt_cycle_info: Checksum error: reset battery cycle data.
[    5.294180] c2    259 [BATT] read_batt_cycle_info: g_batt_first_use_time = 12930991, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.294187] c2    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-05-30 15:56:31, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.294192] c2    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.294213] c2    259 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:12930991, store_time=0, batt_temp=330, store_temp=0, consistent_flag=0 at 5294202505 (1970-05-30 15:56:31.029307960 UTC)
[    5.294222] c2    259 [BATT] pre_level=100,pre_raw_level=100,pre_five_digit=10,pre_chg_src=0
[    5.294228] c2    259 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
[    5.294234] c2    259 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
[    5.294239] c2    259 [BATT] write battery data: level:100, temp:330, time:12930991 at 5294228130 (1970-05-30 15:56:31.029336397 UTC)
[    5.294247] c2    259 ignore the fist time on boot.
[    5.294344] c2     81 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
[    5.294354] c2     81 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.294360] c2     81 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.294423] c2     81 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.311371] c2    259 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[    5.311536] c2    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,80,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[    5.311546] c2    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,1a,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.314419] c3    259 [BATT] ID=3,level=100,level_raw=100,vol=4395mV,temp=330,current=-114440uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5177mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=307,usb_overheat=0,level_accu=0 at 5314409694 (1970-05-30 15:56:31.049488587 UTC)
[    5.314441] c3    259 [BATT] Device is at booting stage at 5314429954 (1970-05-30 15:56:31.049538274 UTC)
[    5.343503] c1    278 [BATT] charger_exist_lock Lock at 5343498030 (1970-05-30 15:56:31.078599111 UTC)
[    5.343519] c3    259 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.343576] c1    334 [BATT] chg_full_check_worker: vol:4395, curr=-114, is_full_count=1, is_full=0 at 5343566207 (1970-05-30 15:56:31.078670829 UTC)
[    5.346092] c2    259 [BATT] set_batt_psy_property. value(0) prop(89) at 5346085374 (1970-05-30 15:56:31.081185569 UTC)
[    5.346201] c2    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-05-30 15:56:31, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.346207] c2    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.346214] c2    259 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
[    5.346222] c2    259 [BATT] set charging_current(500000) at 5346210478 (1970-05-30 15:56:31.081319111 UTC)
[    5.346242] c2    259 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0
[    5.346283] c2     81 SMBCHG: usb_icl: 0 voting for 500 - on
[    5.346290] c2     81 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
[    5.346296] c2     81 SMBCHG: usb_suspend: 2 voting for 0 - off
[    5.346413] c0    355 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(12930988437) diff(46086549) count_same_dischg(0) limit_iusb(0)
[    5.346420] c2     81 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
[    5.346435] c2     81 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    5.346443] c2     81 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.346771] c2    259  at 5346753812 (1970-05-30 15:56:31.081337027 UTC)
[    5.346779] c2    259 [BATT] set ibat max(1600000),ibat_total=3000000[3000000,0],ibat_total_new=1600000,is_parallel=0 at 5346768291 (1970-05-30 15:56:31.081875309 UTC)
[    5.346787] c2    259 [BATT] set_batt_psy_property. value(1600000) prop(32) at 5346775947 (1970-05-30 15:56:31.081884684 UTC)
[    5.346795] c2    259 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 1600
[    5.346801] c2    259 SMBCHG: fcc: 1 voting for 1600 - on
[    5.346858] c2    259 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1600, set to 1600
[    5.346867] c2    259 [BATT] set charging_enable(1) at 5346861468 (1970-05-30 15:56:31.081964528 UTC)
[    5.346880] c2    259 [BATT] set_batt_psy_property. value(1) prop(68) at 5346869385 (1970-05-30 15:56:31.081977913 UTC)
[    5.346888] c2    259 [BATT] set pwrsrc_enable(1) at 5346876833 (1970-05-30 15:56:31.081985882 UTC)
[    5.346895] c2    259 [BATT] set_batt_psy_property. value(1) prop(69) at 5346883916 (1970-05-30 15:56:31.081992757 UTC)
[    5.349593] c2    259 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=16mA
[    5.349765] c2    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,89,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[    5.349787] c2    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.352520] c3    259 [BATT] ID=3,level=100,level_raw=100,vol=4395mV,temp=330,current=-114440uA,chg_name=USB,chg_src=1,chg_en=1,health=0,overload=0,duration=0min,vbus=5218mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=307,usb_overheat=0,level_accu=0 at 5352664281 (1970-05-30 15:56:31.087590205 UTC)
[    5.352686] c3    259 [BATT] Device is at booting stage at 5352676052 (1970-05-30 15:56:31.087783434 UTC)
[    5.396870] c2    260 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.399508] c3    260 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-05-30 15:56:31, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.399519] c3    260 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.399525] c3    260 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
[    5.399535] c3    260 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
[    5.399597] c3    260 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 5399586525 (1970-05-30 15:56:31.134691460 UTC)
[    5.399607] c3    260 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 5399595588 (1970-05-30 15:56:31.134703335 UTC)
[    5.402328] c3    260 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=16mA
[    5.402491] c3    260 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8f,83,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[    5.402501] c3    260 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.405221] c2    260 [BATT] ID=3,level=100,level_raw=100,vol=4395mV,temp=330,current=-114440uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5074mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=307,usb_overheat=0,level_accu=0 at 5405211734 (1970-05-30 15:56:31.140292710 UTC)
[    5.405231] c2    260 [BATT] Device is at booting stage at 5405219911 (1970-05-30 15:56:31.140328804 UTC)
[    5.451912] c0    340 SMBCHG: fastchg_handler: p2f triggered
[    5.451937] c0    340 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.800463] c0    417 type=1400 audit(12930990.823:20): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.846737] c2     81 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    5.846773] c2     81 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
[    5.846779] c2     81 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    5.969200] c0    417 type=1400 audit(12930990.860:21): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.974682] c0    417 type=1400 audit(12930990.860:22): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.975636] c0    417 type=1400 audit(12930990.860:23): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.975750] c0    417 type=1400 audit(12930990.906:24): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.978280] c0    417 type=1400 audit(12930990.906:25): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.978354] c0    417 type=1400 audit(12930990.906:26): avc: denied { search } for pid=470 comm="surfaceflinger" name="firmware" dev="dm-0" ino=24 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    6.350072] c2     81 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    6.350109] c2     81 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
[    6.365456] c0    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
[    6.366613] c0    470 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
[    6.366672] c0    470 [BATT] fb_notifier_callback-> display is On
[    6.366672] c1    259 [BATT] batt_worker: total_time since last batt update = 966 ms.
[    6.369432] c1    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-05-30 15:56:31, g_overheat_55_sec = 0, g_total_level_raw = 0
[    6.369444] c1    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    6.369468] c1    259 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
[    6.369488] c1    259 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 6369478133 (1970-05-30 15:56:32.104581296 UTC)
[    6.369500] c1    259 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 6369489487 (1970-05-30 15:56:32.104596244 UTC)
[    6.372487] c1    259 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[    6.372681] c1    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8f,85,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[    6.372694] c1    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    6.375721] c1    259 [BATT] ID=3,level=100,level_raw=100,vol=4395mV,temp=330,current=-114440uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5072mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=307,usb_overheat=0,level_accu=0 at 6375714383 (1970-05-30 15:56:32.110788172 UTC)
[    6.375736] c1    259 [BATT] Device is at booting stage at 6375725269 (1970-05-30 15:56:32.110833484 UTC)
[    6.481082] c2    249 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    6.827300] c0    471 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    6.839664] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    6.839900] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    6.840261] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.840274] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    6.840527] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.840579] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    6.840934] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    6.841285] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    6.841585] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.841596] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    6.841877] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.841888] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    6.847990] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.848924] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.849951] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.851480] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.853609] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.854053] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.856062] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.857646] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.859822] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    6.860518] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.862517] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.864440] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.866355] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.868015] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.870423] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.884097] c0    471 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    6.884120] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    6.884128] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    6.884136] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    6.884144] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    6.885019] c0    471 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    6.885029] c0    471 [AUD] snd_soc_msm8996: msm_adaptivesound_enable_get: adaptivesound_enable = 0 0x0
[    6.885323] c0    471 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    6.885334] c0    471 [AUD] snd_soc_msm8996: msm_onedotone_get: htc_onedotone_enable = 0 0x0
[    6.995039] c0    471 wcdcal_hwdep_ioctl_shared: incorrect firmware size 154 for vbat
[    7.444930] c1    432 nanohub: nanohub_bl_read_memory: status=79, addr=08000000, length=173068
[    7.445775] c1    432 nanohub: i=0, erase=0, erase_write=1, write=0
[    7.445785] c1    432 nanohub: i=1, erase=0, erase_write=1, write=0
[    7.445792] c1    432 nanohub: i=2, erase=0, erase_write=1, write=0
[    7.445798] c1    432 nanohub: i=3, erase=0, erase_write=1, write=0
[    7.445830] c1    432 nanohub nanohub: nanohub_download_bl: status=79
[    7.843595] c0    471 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    7.855292] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.855592] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.855835] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.855846] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    7.856241] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.856253] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    7.856486] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.858425] c0    471 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.858853] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.858866] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    7.859204] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.859216] c0    471 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    7.864651] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.865666] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.867241] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.867764] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.870127] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.870692] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.872279] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.875231] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.877670] c0    471 msm_pcm_volume_ctl_get substream runtime not found
[    7.878419] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.880709] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.883070] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.885310] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.887524] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.889526] c0    471 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.903941] c0    471 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    7.903966] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    7.903975] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    7.903983] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    7.903990] c0    471 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    7.904946] c0    471 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    7.904959] c0    471 [AUD] snd_soc_msm8996: msm_adaptivesound_enable_get: adaptivesound_enable = 0 0x0
[    7.905252] c0    471 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    7.905262] c0    471 [AUD] snd_soc_msm8996: msm_onedotone_get: htc_onedotone_enable = 0 0x0
[    7.910516] c0    471 tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
[    8.109320] c0    529 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    8.109335] c0    529 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[    8.109351] c0    529 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[    8.109364] c0    529 ->action():           (null)
[    8.109370] c0    529    IRQ_NOPROBE set
[    8.109375] c0    529  IRQ_NOREQUEST set
[    8.109381] c0    529   IRQ_NOTHREAD set
[    8.109747] c0    529 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    8.109757] c0    529 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[    8.109770] c0    529 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[    8.109782] c0    529 ->action():           (null)
[    8.109788] c0    529    IRQ_NOPROBE set
[    8.109793] c0    529  IRQ_NOREQUEST set
[    8.109798] c0    529   IRQ_NOTHREAD set
[   10.062875] c2    474 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[   10.062875] c2    474 
[   10.062911] c2    474 e2fsck: Pass 1: Checking inodes, blocks, and sizes
[   10.062911] c2    474 
[   10.062921] c2    474 e2fsck: Pass 2: Checking directory structure
[   10.062921] c2    474 
[   10.062930] c2    474 e2fsck: Pass 3: Checking directory connectivity
[   10.062930] c2    474 
[   10.062939] c2    474 e2fsck: Pass 4: Checking reference counts
[   10.062939] c2    474 
[   10.062947] c2    474 e2fsck: Pass 5: Checking group summary information
[   10.062947] c2    474 
[   10.062956] c2    474 e2fsck: /dev/block/bootdevice/by-name/userdata: 43327/1630208 files (4.6% non-contiguous), 5510451/6509568 blocks
[   10.062956] c2    474 
[   10.067774] c2    474 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[   10.067800] c2    474 SELinux: initialized (dev sda35, type ext4), uses xattr
[   10.067856] c2    474 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
[   10.067891] c2    474 fs_mgr: /data is file encrypted
[   10.068834] c3      1 init: Service 'flash-nanohub-fw' (pid 432) exited with status 0
[   10.069443] c3      1 init: Starting service 'debuggerd'...
[   10.070013] c3      1 init: Starting service 'debuggerd64'...
[   10.070536] c3      1 init: Starting service 'vold'...
[   10.558077] c3      1 init: Not bootcharting.
[   10.560012] c3     83 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[   10.561086] c3     83 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[   10.676519] c2      1 init: Starting service 'exec 3 (/system/bin/tzdatacheck)'...
[   10.694645] c3      1 init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 559) exited with status 0
[   10.697300] c3      1 init: Service 'qseecomd' is being killed...
[   10.699692] c3      1 init: Service 'qseecomd' (pid 418) killed by signal 9
[   10.699711] c3      1 init: Service 'qseecomd' (pid 418) killing any children in process group
[   10.700418] c3      1 init: Starting service 'qseecomd'...
[   10.702313] c3      1 sps:debugfs:input BAM physical address:0x7544000
[   10.702330] c3      1 sps:no dump option is chosen yet.init: Untracked pid 421 killed by signal 9
[   10.733922] c0      1 init: Starting service 'sysinit'...
[   10.735441] c2      1 init: Starting service 'exec 4 (/system/bin/otapreopt_slot)'...
[   10.745743] c0    417 type=1400 audit(12930996.476:27): avc: denied { search } for pid=561 comm="qseecomd" name="firmware" dev="dm-0" ino=24 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   10.910607] c3      1 init: Service 'sysinit' (pid 562) exited with status 0
[   11.075639] c3      1 init: Service 'exec 4 (/system/bin/otapreopt_slot)' (pid 563) exited with status 0
[   11.085012] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/mips: No such file or directory.
[   11.085155] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/mips64: No such file or directory.
[   11.085195] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/x86: No such file or directory.
[   11.085232] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/x86_64: No such file or directory.
[   11.087874] c2      1 init: Starting service 'exec 5 (/system/bin/recovery-persist)'...
[   11.099545] c3      1 init: Service 'exec 5 (/system/bin/recovery-persist)' (pid 595) exited with status 0
[   11.099972] c3      1 init: Starting service 'exec 6 (/system/bin/bootstat)'...
[   11.109084] c3      1 init: Service 'exec 6 (/system/bin/bootstat)' (pid 596) exited with status 0
[   11.109204] c3      1 init: (Loading properties from /data/local.prop took 0.00s.)
[   11.214358] c3      1 init: Starting service 'logd-reinit'...
[   11.214818] c3      1 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[   11.214831] c3      1 init: write: cannot expand '${persist.sys.ssr.enable_debug}'
[   11.214847] c3      1 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[   11.214857] c3      1 init: write: cannot expand '${persist.sys.mba_boot_timeout}'
[   11.214871] c3      1 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[   11.214884] c3      1 init: write: cannot expand '${persist.sys.modem_auth_timeout}'
[   11.214901] c3      1 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[   11.214911] c3      1 init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
[   11.217124] c3      1 init: Starting service 'healthd'...
[   11.217715] c3      1 init: Starting service 'per_mgr'...
[   11.218283] c3      1 init: Starting service 'irsc_util'...
[   11.218851] c3      1 init: Starting service 'rmt_storage'...
[   11.219421] c3      1 init: Starting service 'msm_irqbalance'...
[   11.219998] c3      1 init: Starting service 'lmkd'...
[   11.220941] c3      1 init: Starting service 'exec 7 (/system/bin/init.power.sh)'...
[   11.239685] c3      1 init: Service 'irsc_util' (pid 600) exited with status 0
[   11.251505] c3      1 init: Service 'logd-reinit' (pid 597) exited with status 0
[   11.260222] c0    411 logd.daemon: reinit
[   11.263191] c1    604 msm_thermal:store_cc_enabled Core control disabled
[   11.289187] c0    417 type=1400 audit(12930997.016:28): avc: granted { net_bind_service } for pid=601 comm="rmt_storage" capability=10 scontext=u:r:rmt:s0 tcontext=u:r:rmt:s0 tclass=capability
[   11.294361] c2    604 msm_thermal:store_cc_enabled Core control enabled
[   11.294404] c2    604 msm_thermal:update_offline_cores cpus_offlined: 0
[   11.294432] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294439] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294447] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294452] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294460] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294466] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294473] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.294479] c2    604 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[   11.326456] c3      1 init: Service 'exec 7 (/system/bin/init.power.sh)' (pid 604) exited with status 0
[   11.326999] c3      1 init: Starting service 'exec 8 (/system/bin/init.mid.sh)'...
[   11.364440] c3      1 init: Service 'exec 8 (/system/bin/init.mid.sh)' (pid 616) exited with status 0
[   11.366154] c3      1 init: Starting service 'exec 9 (/system/bin/init.foreground.sh)'...
[   11.445050] c2    598 healthd: BatteryFullChargePath not found
[   11.445071] c2    598 healthd: BatteryCycleCountPath not found
[   11.458250] c2      1 init: Service 'exec 9 (/system/bin/init.foreground.sh)' (pid 620) exited with status 0
[   11.459802] c2      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory
[   11.459834] c2      1 init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
[   11.461796] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[   11.461830] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[   11.461855] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[   11.461882] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[   11.461906] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[   11.461930] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[   11.461954] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[   11.461978] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[   11.462003] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[   11.462027] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[   11.462050] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[   11.462074] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[   11.462098] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[   11.462122] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[   11.462148] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[   11.462172] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[   11.462196] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[   11.462221] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[   11.462245] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[   11.462269] c2      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[   11.464074] c2      1 init: SELinux: Could not get canonical path for /sys/block/mmcblk0/queue/scheduler restorecon: No such file or directory.
[   11.465428] c2      1 init: service 'console' requires console
[   11.465464] c2      1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory
[   11.465643] c2      1 init: Starting service 'per_proxy'...
[   11.469448] c2      1 init: cannot find '/system/bin/subsystem_ramdump' (No such file or directory), disabling 'ss_ramdump'
[   11.483074] c3      1 rtel: rtel_store: [rtel] rtel address= 0x84200000, size= 0x1200000, v_address= 0xffffff8008830000
[   11.484107] c3      1 rtel: rtel_store: [rtel] registering notif for 'modem', handle=0xffffffc0f78ba800
[   11.484195] c3      1 enable_store: android_usb: already disabled
[   11.484495] c3      1 init: Starting service 'adbd'...
[   11.484686] c3    249 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x1e)
[   11.484694] c3    249 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[   11.493205] c3    611 subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[   11.495635] c3      1 init: cannot find '/system/xbin/su' (No such file or directory), disabling 'su_daemon'
[   11.497040] c3    611 IPA received MPSS BEFORE_POWERUP
[   11.497387] c0    611 ipa ipa2_uc_state_check:301 uC is not loaded
[   11.497435] c0    611 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   11.499110] c0    611 IPA BEFORE_POWERUP handling is complete
[   11.501615] c0    611 pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008e9f0000
[   11.505157] c2      1 init: cannot find '/system/bin/subsystem_ramdump' (No such file or directory), disabling 'ss_ramdump'
[   11.507714] c2      1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory
[   11.508119] c2      1 init: Starting service 'exec 10 (/system/bin/update_verifier)'...
[   11.509717] c0    631 read descriptors
[   11.509752] c0    631 read strings
[   11.509799] c0    631 mtp_bind_config
[   11.510700] c3    611 pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
[   11.513217] c3    611 pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f7200000 to 0x00000000f7300000 size 100000
[   11.523914] c0      0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 5
[   11.544811] c2      1 init: Service 'exec 10 (/system/bin/update_verifier)' (pid 630) exited with status 0
[   11.545120] c2      1 init: Starting service 'thermal-engine'...
[   11.545675] c2      1 init: Starting service 'adsprpcd'...
[   11.546174] c2      1 init: Starting service 'imsqmidaemon'...
[   11.546673] c2      1 init: Starting service 'ssr_setup'...
[   11.547783] c2      1 init: Starting service 'port-bridge'...
[   11.548657] c2      1 init: Starting service 'netmgrd'...
[   11.549152] c2      1 init: Service qti does not have a SELinux domain defined.
[   11.549165] c2      1 init: Starting service 'qti'...
[   11.549673] c2      1 init: Starting service 'perfd'...
[   11.549836] c1    641 init: cannot execve('/vendor/bin/qti'): Permission denied
[   11.549897] c3    417 type=1400 audit(12930997.280:29): avc: denied { execute_no_trans } for pid=641 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   11.550322] c2      1 init: Starting service 'zygote'...
[   11.550899] c2      1 init: Starting service 'zygote_secondary'...
[   11.551513] c2      1 init: Starting service 'cameraserver'...
[   11.552094] c2      1 init: Starting service 'drm'...
[   11.552647] c2      1 init: Starting service 'installd'...
[   11.553207] c2      1 init: Starting service 'keystore'...
[   11.553792] c2      1 init: Starting service 'mediacodec'...
[   11.554334] c2      1 init: Starting service 'mediadrm'...
[   11.554887] c2      1 init: Starting service 'mediaextractor'...
[   11.555484] c2      1 init: Starting service 'media'...
[   11.556049] c2      1 init: Starting service 'netd'...
[   11.556563] c2      1 init: Starting service 'ril-daemon'...
[   11.557120] c2      1 init: Service 'qti' (pid 641) exited with status 127
[   11.557141] c2      1 init: Service 'qti' (pid 641) killing any children in process group
[   11.557468] c2      1 init: Starting service 'fingerprintd'...
[   11.563450] c2      1 init: Starting service 'time_daemon'...
[   11.564112] c2      1 init: Starting service 'cnd'...
[   11.564675] c2      1 init: Starting service 'cnss_diag'...
[   11.565246] c2      1 init: Starting service 'cnss-daemon'...
[   11.565818] c2      1 init: Starting service 'loc_launcher'...
[   11.566389] c2      1 init: Starting service 'init-radio-sh'...
[   11.567212] c2      1 init: Starting service 'nanohub_slpi'...
[   11.567829] c2      1 init: Starting service 'gatekeeperd'...
[   11.568451] c2      1 init: Starting service 'perfprofd'...
[   11.569059] c2      1 init: Starting service 'update_engine'...
[   11.571965] c2      1 init: cannot find '/system/xbin/su' (No such file or directory), disabling 'su_daemon'
[   11.583873] c3    611 pil-q6v5-mss 2080000.qcom,mss: MBA boot done
[   11.584550] c2      1 dwc3 6a00000.dwc3: request ffffffc0f4a42400 was not queued to ep0out
[   11.591191] c2      1 mtp_bind_config
[   11.619006] c1    642 devbw soc:qcom,cpubw: dev_pm_opp_get_opp_count: device OPP not found (-19)
[   11.619585] c3    636 'opened /dev/adsprpc-smd c 215 0'
[   11.630255] c2      1 init: Service 'ssr_setup' (pid 638) exited with status 0
[   11.630996] c0    502 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[   11.631007] c0    502 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
[   11.631020] c0    502 android_work: android_work: did not send uevent (0 0           (null))
[   11.636035] c0    662 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 5
[   11.695868] c2      1 init: Starting service 'imsdatadaemon'...
[   11.730078] c2      1 init: Service 'init-radio-sh' (pid 661) exited with status 0
[   11.765039] c0     49 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 5
[   11.765130] c0    502 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[   11.765138] c0    502 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
[   11.765149] c0    502 android_work: android_work: did not send uevent (0 0           (null))
[   11.787463] c2    417 type=1400 audit(12930997.520:30): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   11.811720] c0    662 'opened /dev/sdsprpc-smd c 215 1'
[   11.826030] c2    766 msm_thermal:interrupt_mode_init switch to interrupt mode
[   11.826030] c2    766 ,
[   11.826079] c2    766 msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[   11.826088] c2    766 msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[   11.826093] c2    766 msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[   11.826098] c2    766 msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[   11.881060] c0    502 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[   11.881074] c0    502 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
[   11.881181] c0    502 android_work: android_work: sent uevent USB_STATE=CONNECTED
[   11.881190] c0    502 android_work: [USB] android_work: set usb_connect2pc = 1
[   11.882792] c0    777 android_usb gadget: super-speed config #1: 66bf0c8.android_usb
[   11.882899] c0    777 msm-dwc3 6a00000.ssusb: Avail curr from USB = 900
[   11.883151] c0    502 SMBCHG: usb_icl: 0 voting for 900 - on
[   11.883164] c0    502 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 900
[   11.883278] c0    502 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 900 mA
[   11.883344] c0    502 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[   11.883394] c0    502 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[   11.883652] c0    502 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
[   11.883661] c0    502 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
[   11.890792] c2    766 msm_thermal:set_enabled enabled = 0
[   11.891726] c2    766 msm_thermal:store_cpus_offlined "thermal-engine"(PID:766) request cpus offlined mask 0 
[   11.936843] c0    502 android_work: android_work: sent uevent USB_STATE=CONFIGURED
[   12.045666] c3    417 type=1400 audit(12930997.523:31): avc: granted { net_admin } for pid=658 comm="cnss_diag" capability=12 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability
[   12.062600] c3    417 type=1400 audit(12930997.523:32): avc: denied { dac_override } for pid=658 comm="cnss_diag" capability=1 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability permissive=0
[   12.065177] c3    417 type=1400 audit(12930997.523:33): avc: denied { dac_read_search } for pid=658 comm="cnss_diag" capability=2 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability permissive=0
[   12.386768] c0    266 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[   12.386820] c0    266 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
[   12.386835] c0    266 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[   12.619503] c1    645 msm_pm_qos_add_request: add request
[   12.636641] c0    645 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx378
[   12.650663] c1    645 msm_cci_init:1374: hw_version = 0x10040000
[   12.651339] c1    645 imx378_htc probe succeeded
[   12.664951] c0    645 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx179
[   12.679431] c0    645 msm_cci_init:1374: hw_version = 0x10040000
[   12.679758] c0    645 imx179_htc probe succeeded
[   12.695386] c0    645 msm_csid_init: CSID_VERSION = 0x30050000
[   12.696216] c0    416 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[   12.698153] c0    645 msm_csid_init: CSID_VERSION = 0x30050000
[   12.698800] c0    645 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[   12.706879] c1    645 msm_cci_init:1374: hw_version = 0x10040000
[   12.782833] c1    292 msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 650
[   12.785801] c1    292 msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 647
[   12.793038] c1    292 msm_thermal:hotplug_notify tsens_tz_sensor9 reach temp threshold: 650
[   12.794525] c1    292 msm_thermal:hotplug_notify tsens_tz_sensor9 reach temp threshold: 647
[   12.794896] c3    611 pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
[   12.888744] c0      0 pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
[   12.888861] c0    329 pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
[   12.895162] c0    329 M-Notify: General: 7
[   12.895177] c2    611 IPA received MPSS AFTER_POWERUP
[   12.895186] c2    611 IPA AFTER_POWERUP handling is complete
[   12.974508] c2    260 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[   13.000238] c0    645 msm_cci_init:1374: hw_version = 0x10040000
[   13.137072] c0    266 apr_tal:Modem Is Up
[   13.138351] c3    909 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
[   13.337785] c1    516 Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
[   13.337919] c2     49 ipa-wan handle_indication_req:133 not send indication
[   13.339574] c0    259 ipa ipa_uc_response_hdlr:461 IPA uC loaded
[   13.339634] c0    259 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   13.339804] c1    516 QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
[   13.344035] c0    259 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   13.345440] c1    259 ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
[   13.345480] c1    259 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   13.476785] c1    645 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[   13.476803] c1    645 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[   13.477149] c3    417 type=1400 audit(12930998.583:34): avc: denied { search } for pid=645 comm="cameraserver" name="firmware" dev="dm-0" ino=24 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   13.482327] c3    417 type=1400 audit(12930998.583:35): avc: denied { search } for pid=645 comm="cameraserver" name="firmware" dev="dm-0" ino=24 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   13.482444] c3    417 type=1400 audit(12930998.583:36): avc: denied { search } for pid=645 comm="cameraserver" name="firmware" dev="dm-0" ino=24 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   14.828034] c1    417 type=1400 audit(12930999.933:37): avc: granted { net_admin } for pid=1130 comm="lowi-server" capability=12 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   14.890306] c2    417 type=1400 audit(12930999.993:38): avc: granted { net_raw } for pid=1131 comm="slim_daemon" capability=13 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   15.068537] c1    260 smd_write_segment_avail: non-packet channel specified
[   15.108370] c2      1 init: Starting service 'ims_rtp_daemon'...
[   15.112916] c1      1 init: Starting service 'imscmservice'...
[   15.386743] c1    278 [BATT] set charging_current(900000), PC connected at 15386741061 (1970-05-30 15:56:40.496365192 UTC)
[   15.386848] c1    278 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[   15.386861] c1    278 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[   15.386998] c1    278 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[   15.757832] c2   1127 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   15.758777] c2   1127 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   15.760496] c0   1127 ipa-wan ipa_wwan_ioctl:1522 get AGG size 8192 count 10
[   15.760972] c0   1127 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   15.776946] c2   1127 ipa ipa_assign_policy:2973 get close-by 8192
[   15.776959] c2   1127 ipa ipa_assign_policy:2979 set rx_buff_sz 7680
[   15.776964] c2   1127 ipa ipa_assign_policy:3001 set aggr_limit 6
[   15.806592] c2   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data0) register to IPA
[   15.896080] c2   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data1) register to IPA
[   15.982460] c1   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data2) register to IPA
[   16.006836] c3      1 init: Service qti does not have a SELinux domain defined.
[   16.006855] c3      1 init: Starting service 'qti'...
[   16.025777] c3    417 type=1400 audit(12931001.130:39): avc: denied { execute_no_trans } for pid=1232 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   16.026147] c3   1232 init: cannot execve('/vendor/bin/qti'): Permission denied
[   16.026833] c3      1 init: Service 'qti' (pid 1232) exited with status 127
[   16.026850] c3      1 init: Service 'qti' (pid 1232) killing any children in process group
[   16.084728] c2   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data3) register to IPA
[   16.147968] c0   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data4) register to IPA
[   16.217644] c2   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data5) register to IPA
[   16.304753] c0   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data6) register to IPA
[   16.393297] c3   1127 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data7) register to IPA
[   17.461533] c2   1382 HTB: quantum of class 10001 is big. Consider r2q change.
[   17.482060] c0   1383 HTB: quantum of class 10010 is big. Consider r2q change.
[   21.394071] c2      1 init: Service qti does not have a SELinux domain defined.
[   21.394089] c2      1 init: Starting service 'qti'...
[   21.397000] c3    417 type=1400 audit(12931006.503:40): avc: denied { execute_no_trans } for pid=1389 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   21.397069] c1   1389 init: cannot execve('/vendor/bin/qti'): Permission denied
[   21.397575] c2      1 init: Service 'qti' (pid 1389) exited with status 127
[   21.397593] c2      1 init: Service 'qti' (pid 1389) killing any children in process group
[   23.763507] c1    645 MSM-SENSOR-INIT msm_sensor_wait_for_probe_done:53 msm_sensor_wait_for_probe_done:53 wait timeout
[   23.763507] c1    645 
[   23.763552] c1    645 MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:148 msm_sensor_init_subdev_do_ioctl:148 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
[   23.766224] c1    645 msm_pm_qos_update_request: update request 100
[   23.766456] c1    645 msm_pm_qos_update_request: update request -1<6>[   23.780419] c3   1400 msm_csid_init: CSID_VERSION = 0x30050000
[   23.781109] c1   1390 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[   23.784741] c3   1409 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[   23.784754] c3   1409 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[   23.802347] c3   1400 msm_cci_init:1374: hw_version = 0x10040000
[   23.940079] c2    417 type=1400 audit(12931009.036:41): avc: denied { search } for pid=1419 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=16376 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[   23.946011] c3    260 [FLT] qpnp_flash_led_work: brt = 0
[   23.948381] c3    260 SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
[   23.948393] c3    260 SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
[   23.969291] c2    645 msm_pm_qos_update_request: update request 100
[   23.969325] c2    645 msm_pm_qos_update_request: update request -1<6>[   23.978223] c1   1434 msm_csid_init: CSID_VERSION = 0x30050000
[   23.983727] c0   1424 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[   24.001406] c0   1443 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[   24.001425] c0   1443 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[   24.010342] c1   1434 msm_cci_init:1374: hw_version = 0x10040000
[   24.046182] c2    417 type=1400 audit(12931009.150:42): avc: denied { search } for pid=1452 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=16376 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[   25.386791] c1    278 [BATT] chg_full_check_worker: vol:4395, curr=-114, is_full_count=2, is_full=0 at 25386790651 (1970-05-30 15:56:50.496414625 UTC)
[   26.829488] c2      1 init: Service qti does not have a SELinux domain defined.
[   26.829535] c2      1 init: Starting service 'qti'...
[   26.833098] c0   1518 init: cannot execve('/vendor/bin/qti'): Permission denied
[   26.833983] c2      1 init: Service 'qti' (pid 1518) exited with status 127
[   26.834033] c2      1 init: Service 'qti' (pid 1518) killing any children in process group
[   26.836967] c2    417 type=1400 audit(12931011.936:43): avc: denied { execute_no_trans } for pid=1518 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   31.837623] c2      1 init: Service qti does not have a SELinux domain defined.
[   31.837641] c2      1 init: Starting service 'qti'...
[   31.839967] c3   1678 init: cannot execve('/vendor/bin/qti'): Permission denied
[   31.840844] c2    417 type=1400 audit(12931016.943:44): avc: denied { execute_no_trans } for pid=1678 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   31.846971] c2      1 init: Service 'qti' (pid 1678) exited with status 127
[   31.846990] c2      1 init: Service 'qti' (pid 1678) killing any children in process group
[   33.333518] c1    278 FG: fg_is_batt_id_valid: fg batt sts 0x8
[   36.850478] c2      1 init: Service qti does not have a SELinux domain defined.
[   36.850522] c2      1 init: Starting service 'qti'...
[   36.851361] c1    417 type=1400 audit(12931021.956:45): avc: denied { execute_no_trans } for pid=1741 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   36.851762] c1   1741 init: cannot execve('/vendor/bin/qti'): Permission denied
[   36.852423] c1      1 init: Service 'qti' (pid 1741) exited with status 127
[   36.852443] c1      1 init: Service 'qti' (pid 1741) killing any children in process group
[   37.282523] c2   1085 input: uinput-folio as /devices/virtual/input/input9
[   37.386369] c2   1465 qpnp_led.red: b:00 on:50 off:0
[   37.386449] c2   1465 qpnp_led.green: b:00 on:50 off:0
[   37.386514] c2   1465 qpnp_led.blue: b:00 on:50 off:0
[   37.386618] c2   1465 qpnp_led.red: b:00 on:50 off:0
[   37.386866] c2   1465 qpnp_led.green: b:00 on:50 off:0
[   37.386942] c2   1465 qpnp_led.blue: b:00 on:50 off:0
[   37.387053] c2   1465 qpnp_led.red: b:00 on:50 off:0
[   37.387123] c2   1465 qpnp_led.green: b:00 on:50 off:0
[   37.387188] c2   1465 qpnp_led.blue: b:00 on:50 off:0
[   37.468428] c0    502 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[   37.469727] c0    502 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[   38.436499] c0   1085 qpnp_led.red: b:00 on:50 off:0
[   38.436574] c0   1085 qpnp_led.green: b:00 on:50 off:0
[   38.436633] c0   1085 qpnp_led.blue: b:00 on:50 off:0
[   38.436815] c0   1085 qpnp_led.red: b:00 on:50 off:0
[   38.436891] c0   1085 qpnp_led.green: b:00 on:50 off:0
[   38.436958] c0   1085 qpnp_led.blue: b:00 on:50 off:0
[   38.437081] c0   1085 qpnp_led.red: b:00 on:50 off:0
[   38.437154] c0   1085 qpnp_led.green: b:00 on:50 off:0
[   38.437219] c0   1085 qpnp_led.blue: b:00 on:50 off:0
[   38.510453] c3   1085 acc_open
[   38.510481] c3   1085 acc_release
[   38.614873] c1    655 QSEECOM: qseecom_load_app: App (fpctzappfingerprint) does'nt exist, loading apps for first time
[   38.784022] c1      0 FG: fg_soc_irq_handler: triggered 0x25
[   38.784256] c1    278 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[   38.784277] c1    278 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[   38.785031] c1    358 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[   39.279787] c2    655 QSEECOM: qseecom_load_app: App with id 6 (fpctzappfingerprint) now loaded
[   39.296629] c2    655 input: uinput-fpc as /devices/virtual/input/input10
[   40.265909] c0   1841 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   40.275925] c0   1841 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   40.276868] c0   1841 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   40.278030] c0   1866 FUSE: SHORTCIRCUIT enabled [sdcard : 1866]!
[   40.278223] c0   1865 FUSE: SHORTCIRCUIT enabled [sdcard : 1865]!
[   40.278286] c0   1864 FUSE: SHORTCIRCUIT enabled [sdcard : 1864]!
[   40.424683] c0   1115 fwpath_changed_handler : new_mode : sta, present_mode : 
[   40.424710] c0   1115 kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 1 caller: fwpath_changed_handler
[   40.424739] c0   1115 wlan: loading driver v4.4.25.027
[   40.463455] c0   1115 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   40.467121] c0   1115 msm_pcie_enable: PCIe RC0 PHY is ready!
[   40.477407] c0   1115 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   40.517309] c0   1115 msm_pcie_enable: PCIe RC0 link initialized
[   40.518897] c3    417 type=1400 audit(12931025.623:46): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.519065] c3    417 type=1400 audit(12931025.623:47): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.519111] c3    417 type=1400 audit(12931025.623:48): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.524675] c0   1115 hif_pci_probe:, con_mode= 0x0
[   40.524694] c0   1115 PCI device id is 003e :003e
[   40.524713] c0   1115 cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[   40.524789] c0   1115 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   40.526322] c0   1115 
[   40.526322] c0   1115  hif_pci_configure : num_desired MSI set to 0
[   40.526401] c0   1115 
[   40.526401] c0   1115  Using PCI Legacy Interrupt
[   40.571505] c3    417 type=1400 audit(12931025.676:49): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.571962] c3    417 type=1400 audit(12931025.676:50): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.572039] c3    417 type=1400 audit(12931025.676:51): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.577327] c3   1115 wlan: [1115:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   40.577343] c3   1115 wlan: [1115:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmNonOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   40.578121] c3   1115 wlan: [1115:E :HDD] hdd_apply_cfg_ini: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255
[   40.579077] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   40.579196] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   40.579212] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   40.579294] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   40.579390] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   40.592186] c2   1115 NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   40.596388] c2   1115 ol_download_firmware: Using 0x1234 for the remainder of init
[   40.596402] c2   1115 ol_transfer_codeswap_struct: failed to get codeswap structure
[   40.598433] c2    417 type=1400 audit(12931025.700:52): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.598536] c2    417 type=1400 audit(12931025.700:53): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.598589] c2    417 type=1400 audit(12931025.700:54): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.626981] c0   1115 wlan: [1115:E :VOS] __ol_transfer_bin_file: transferring file: otp30.bin size 23985 bytes done!
[   40.628372] c3    649 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   40.629785] c0    417 type=1400 audit(12931025.733:55): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.630089] c0    417 type=1400 audit(12931025.733:56): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.630192] c0    417 type=1400 audit(12931025.733:57): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.631099] c0   1115 Board extended Data download address: 0x0
[   40.635381] c1    649 subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
[   40.637292] c0   1115 wlan: [1115:E :VOS] __ol_transfer_bin_file: transferring file: bdwlan30.b82 size 8124 bytes done!
[   40.637627] c0   1115 __ol_transfer_bin_file: no Setup file defined
[   40.637832] c1    417 type=1400 audit(12931025.743:58): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.637937] c1    417 type=1400 audit(12931025.743:59): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.638006] c1    417 type=1400 audit(12931025.743:60): avc: denied { search } for pid=1115 comm="Binder:653_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.641240] c1    417 type=1400 audit(12931025.746:61): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.641415] c1    417 type=1400 audit(12931025.746:62): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.641491] c1    417 type=1400 audit(12931025.746:63): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.644631] c2    649 subsys-pil-tz ce0000.qcom,venus: venus: loading from 0x0000000090f00000 to 0x0000000091400000
[   40.668937] c1    417 type=1400 audit(12931025.776:64): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.669068] c1    417 type=1400 audit(12931025.776:65): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.669142] c1    417 type=1400 audit(12931025.776:66): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.676755] c0    417 type=1400 audit(12931025.780:67): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.677034] c0    417 type=1400 audit(12931025.780:68): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.677200] c0    417 type=1400 audit(12931025.780:69): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.693501] c3    417 type=1400 audit(12931025.796:70): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.693611] c3    417 type=1400 audit(12931025.796:71): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.693657] c3    417 type=1400 audit(12931025.796:72): avc: denied { search } for pid=649 comm="mediacodec" name="firmware" dev="dm-0" ino=24 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   40.727061] c2    649 subsys-pil-tz ce0000.qcom,venus: venus: Brought out of reset
[   40.759163] c1    797 msm_vidc: info: Closed video instance: 0000000000000000
[   40.763681] c3    649 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   40.776784] c1    649 msm_vidc: info: Closed video instance: 0000000000000000
[   40.781195] c3   1908 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   40.791122] c3    797 msm_vidc: info: Closed video instance: 0000000000000000
[   40.795800] c3   1908 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   40.805384] c2    649 msm_vidc: info: Closed video instance: 0000000000000000
[   40.811062] c2    797 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   40.820750] c1    649 msm_vidc: info: Closed video instance: 0000000000000000
[   40.829530] c3    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.849651] c1   1908 msm_vidc: info: Closed video instance: 0000000000000000
[   40.855410] c1    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.878045] c1    797 msm_vidc: info: Closed video instance: 0000000000000000
[   40.883791] c1   1908 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.895282] c2    649 msm_vidc: info: Closed video instance: 0000000000000000
[   40.899261] c2    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.911395] c2   1908 msm_vidc: info: Closed video instance: 0000000000000000
[   40.915145] c2    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.928963] c3    797 msm_vidc: info: Closed video instance: 0000000000000000
[   40.932962] c2   1908 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.947518] c1    649 msm_vidc: info: Closed video instance: 0000000000000000
[   40.955014] c0   1908 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.966447] c2   1908 msm_vidc: info: Closed video instance: 0000000000000000
[   40.970146] c3    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   40.985077] c3   1908 msm_vidc: info: Closed video instance: 0000000000000000
[   40.992002] c0    797 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   41.010309] c1    649 msm_vidc: info: Closed video instance: 0000000000000000
[   41.329310] c0   1115 wlan: [1115:E :VOS] __ol_transfer_bin_file: transferring file: qwlan30.bin size 749028 bytes done!
[   41.329622] c0   1115 +HTCCreate ..  HIF :ffffffc0ea82b800 
[   41.329656] c0   1115 -HTCCreate (0xffffffc042c71000) 
[   41.329737] c0   1115 wlan: [1115:F :WDA] WMA --> wmi_unified_attach - success
[   41.329751] c0   1115 ol_if_dfs_attach: called; ptr=ffffffc0f5201c54, radar_info=ffffffc06de0f7b0
[   41.330073] c0   1115 wlan: [1115:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0 
[   41.330157] c0   1115 +HWT
[   41.330165] c0   1115 pipe_num:0 pipe_info:0xffffffc0ea82b8b8
[   41.330212] c0   1115 pipe_num:3 pipe_info:0xffffffc0ea82ba20
[   41.330230] c0   1115 pipe_num:4 pipe_info:0xffffffc0ea82ba98
[   41.330308] c0   1115 pipe_num:5 pipe_info:0xffffffc0ea82bb10
[   41.342378] c0   1115 Target Ready! : transmit resources : 2 size:1792, MaxMsgsPerHTCBundle = 1
[   41.342393] c0   1115 HTC Service Index : 1 TX : 0x100 : alloc:2 
[   41.342402] c0   1115 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
[   41.342408] c0   1115 -HWT
[   41.342549] c1   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.342699] c0   1115 is_full_reorder_offloaded? 1
[   41.342710] c0   1115 HTC Service TX : 0x300 : allocation is zero! 
[   41.342831] c0   1115 HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready
[   41.342839] c0   1115 HTC Service:0x0300 ep:1 TX flow control disabled
[   41.349417] c3   1115 HTT: full reorder offload enabled
[   41.350087] c3   1115 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
[   41.350101] c3   1115 wlan: [1115:F :WDA] WMA --> wmi_unified_connect_htc_service - success
[   41.350144] c0   1959 wlan: [1959:F :WDA] McThread: WNI_CFG_DNLD_REQ
[   41.350222] c3   1115 HTC using TX credit flow control
[   41.351202] c0    502 __wmi_control_rx: WMI UNIFIED SERVICE READY event
[   41.351228] c0    502 wlan: [502:F :WDA] WMA <-- WMI_SERVICE_READY_EVENTID
[   41.351242] c0    502 wlan: [502:E :WDA] wma_rx_service_ready_event: Firmware build version : 43228007
[   41.351251] c0    502 wlan: [502:E :WDA] wma_rx_service_ready_event: Board version: 0.1031102
[   41.351299] c0    502 wlan: [502:F :WDA] WMA --> WMI_INIT_CMDID
[   41.351483] c0   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.367960] c0    502 __wmi_control_rx:  WMI UNIFIED READY event
[   41.367986] c0    502 wlan: [502:F :WDA] WMA <-- WMI_READY_EVENTID
[   41.368414] c0   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.368686] c3   1115 wlan: [1115:E :SME] csr_init_chan_list: 333: init time country code US
[   41.368929] c3     83 cfg80211: Calling CRDA for country: US
[   41.369017] c3     83 wlan: [83:F :HDD] pAdapter is null !!
[   41.369067] c3     83 wlan: [83:E :WDA] regdmn_set_dfs_region: dfs_region: 1
[   41.369077] c3     83 cfg80211: Regulatory domain changed to country: US
[   41.369082] c3     83 cfg80211:  DFS Master region: FCC
[   41.369086] c3     83 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   41.369093] c3     83 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369099] c3     83 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (N/A)
[   41.369105] c3     83 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[   41.369110] c3     83 cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[   41.369115] c3     83 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369120] c3     83 cfg80211:   (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369125] c3     83 cfg80211:   (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369130] c3     83 cfg80211:   (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369136] c3     83 cfg80211:   (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369141] c3     83 cfg80211:   (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369147] c3     83 cfg80211:   (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369152] c3     83 cfg80211:   (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369157] c3     83 cfg80211:   (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369162] c3     83 cfg80211:   (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369166] c3     83 cfg80211:   (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   41.369171] c3     83 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   41.369644] c3   1115 wlan: [1115:E :WDA] MCC TX Pause Event Handler register
[   41.369660] c3   1115 wlan: [1115:E :WDA] Target does not support cesium network
[   41.369923] c3   1115 Pkt log is enabled
[   41.369959] c3   1115 wlan: [1115:E :SME] sme_AddChAvoidCallback: Plug in CH AVOID CB
[   41.372396] c3   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.372415] c3   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.373418] c0    402 target uses HTT version 3.28; host uses 3.27
[   41.373429] c0    402 *** Warning: host/target HTT versions are different, though compatible!
[   41.373583] c0   1959 wlan: [1959:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x4d
[   41.373883] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.374017] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.374109] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.374399] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.374644] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.374700] c0   1959 wlan: [1959:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = ac:37:43:4a:2c:60
[   41.375039] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.375774] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.376214] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.376520] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.376667] c3     83 wlan: [83:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   41.378666] c0   1959 wlan: [1959:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   41.378676] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.379099] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.379291] c0   1959 wlan: [1959:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4a:2c:60
[   41.379339] c0   1959 wlan: [1959:F :WDA] Creating self peer ae:37:43:4a:2c:60, vdev_id 1
[   41.379364] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.379366] c0   1959 wlan: [1959:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4a:2c:60 vdev_id 1, peer_count - 1
[   41.379605] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.380696] c0   1115 Host SW:4.4.25.027, FW:4.3.2.7, HW:QCA6174_REV3_2
[   41.381024] c0   1115 wlan: [1115:E :HDD] hdd_hex_string_to_u16_array: 6277: str ffffffc07433192d intArray ffffffc06de0f97a intArrayMaxLen 6
[   41.381920] c0    502 wlan: [502:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   41.381949] c0   1115 wlan: [1115:E :HDD] hdd_hex_string_to_u16_array: 6277: str ffffffc07433192d intArray ffffffc06de0f97a intArrayMaxLen 6
[   41.382016] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.382126] c0   1959 wlan: [1959:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   41.382347] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.382561] c2   1957 wlan: [1957:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   41.382956] c0   1115 ol_pktlog_init: pktlogmod_init successfull
[   41.383025] c0   1115 hif_pci_pm_runtime_init: Enabling RUNTIME PM, Delay: 500 ms
[   41.383084] c0   1115 wlan: driver loaded in 958365
[   41.426318] c2      1 init: Service qti does not have a SELinux domain defined.
[   41.426335] c2      1 init: Starting service 'qti'...
[   41.435612] c1   2068 init: cannot execve('/vendor/bin/qti'): Permission denied
[   41.435647] c0    417 type=1400 audit(12931026.540:73): avc: denied { execute_no_trans } for pid=2068 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   41.436309] c3      1 init: Service 'qti' (pid 2068) exited with status 127
[   41.436330] c3      1 init: Service 'qti' (pid 2068) killing any children in process group
[   41.519959] c3      1 init: Starting service 'p2p_supplicant'...
[   41.649049] c0   1959 wlan: [1959:F :WDA] P2P Device: removing self peer ae:37:43:4a:2c:60
[   41.649069] c0   1959 TXRX: ol_txrx_peer_detach:peer ffffffc0eecfd000 (ae:37:43:4a:2c:60)
[   41.649083] c0   1959 wlan: [1959:E :WDA] wma_remove_peer: Removed peer with addr ae:37:43:4a:2c:60 vdevid 1 peer_count 0
[   41.652571] c0    499 TXRX: ol_rx_peer_unmap_handler: Remove the ID 24 reference to peer ffffffc0eecfd000
[   41.652601] c0    499 TXRX: ol_rx_peer_unmap_handler: Remove the ID 8 reference to peer ffffffc0eecfd000
[   41.652610] c0    499 TXRX: Deleting peer ffffffc0eecfd000 (ae:37:43:4a:2c:60)
[   41.653053] c0   1959 wlan: [1959:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4a:2c:60
[   41.653489] c0   1959 wlan: [1959:F :WDA] Creating self peer ae:37:43:4a:2c:60, vdev_id 1
[   41.653563] c0   1959 wlan: [1959:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4a:2c:60 vdev_id 1, peer_count - 1
[   41.658474] c0   2085 IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[   42.517263] c0   1863 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[   42.517278] c0   1863 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[   42.517296] c0   1863 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[   42.517310] c0   1863 ->action():           (null)
[   42.517317] c0   1863    IRQ_NOPROBE set
[   42.517323] c0   1863  IRQ_NOREQUEST set
[   42.517329] c0   1863   IRQ_NOTHREAD set
[   42.930108] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   42.932257] c0    266 cnss: runtime suspend status: 0
[   43.003447] c1      1 init: Starting service 'start_hci_filter'...
[   43.133207] c3      1 init: avc:  granted  { set } for property=net.lte.ims.data.enabled pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   43.582703] c0    417 type=1400 audit(1485692557.066:74): avc: denied { read } for pid=2353 comm=626C7565746F6F74682077616B65 name="libaptXScheduler.so" dev="dm-0" ino=545 scontext=u:r:bluetooth:s0 tcontext=u:object_r:unlabeled:s0 tclass=file permissive=0
[   43.974232] c3   2426 HTB: quantum of class 10010 is big. Consider r2q change.
[   44.740673] c1   2461 HTB: quantum of class 10010 is big. Consider r2q change.
[   45.441129] c1    358 [BATT] chg_full_check_worker: vol:4373, curr=13, is_full_count=0, is_full=0 at 45441182441 (2017-01-29 12:22:38.928689826 UTC)
[   45.510346] c2      1 init: avc:  granted  { set } for property=net.lte.ims.volte.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.510708] c2      1 init: avc:  granted  { set } for property=net.lte.ims.wfc.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.510998] c2      1 init: avc:  granted  { set } for property=net.lte.ims.vt.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.519946] c3      1 init: avc:  granted  { set } for property=net.lte.ims.volte.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.565893] c3      1 init: avc:  granted  { set } for property=net.lte.ims.wfc.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.641495] c0      1 init: avc:  granted  { set } for property=net.lte.ims.vt.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   45.721148] c1      0 NOHZ: local_softirq_pending 08
[   45.817034] c1      0 NOHZ: local_softirq_pending 08
[   45.960369] c1   2534 HTB: quantum of class 10001 is big. Consider r2q change.
[   45.979471] c1   2535 HTB: quantum of class 10010 is big. Consider r2q change.
[   46.540514] c0   2543 HTB: quantum of class 10010 is big. Consider r2q change.
[   46.581372] c1   2547 HTB: quantum of class 10010 is big. Consider r2q change.
[   46.634557] c0      1 init: Service qti does not have a SELinux domain defined.
[   46.634590] c0      1 init: Starting service 'qti'...
[   46.652765] c1   2553 init: cannot execve('/vendor/bin/qti'): Permission denied
[   46.654361] c0      1 init: Service 'qti' (pid 2553) exited with status 127
[   46.654399] c0      1 init: Service 'qti' (pid 2553) killing any children in process group
[   46.657914] c0    417 type=1400 audit(1485692560.136:75): avc: denied { execute_no_trans } for pid=2553 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   46.727938] c0      0 NOHZ: local_softirq_pending 08
[   46.728224] c0      0 NOHZ: local_softirq_pending 08
[   48.554833] c0      1 init: Service 'bootanim' (pid 473) exited with status 0
[   48.610515] c1   1474 qpnp_led.red: b:00 on:50 off:0
[   48.610609] c1   1474 qpnp_led.green: b:0f on:50 off:0
[   48.610815] c1   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.611955] c1   1474 qpnp_led.red: b:00 on:50 off:0
[   48.612028] c1   1474 qpnp_led.green: b:0f on:50 off:0
[   48.613240] c1   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.614475] c1   1474 qpnp_led.red: b:00 on:50 off:0
[   48.614558] c1   1474 qpnp_led.green: b:0f on:50 off:0
[   48.615784] c1   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.665835] c0      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory
[   48.674202] c2   1474 qpnp_led.red: b:00 on:50 off:0
[   48.674275] c2   1474 qpnp_led.green: b:00 on:50 off:0
[   48.675358] c2   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.675452] c2   1474 qpnp_led.red: b:00 on:50 off:0
[   48.675519] c2   1474 qpnp_led.green: b:00 on:50 off:0
[   48.675582] c2   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.675673] c2   1474 qpnp_led.red: b:00 on:50 off:0
[   48.675742] c2   1474 qpnp_led.green: b:00 on:50 off:0
[   48.675805] c2   1474 qpnp_led.blue: b:00 on:50 off:0
[   48.696745] c3    468 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   48.696885] c3    468 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   48.700390] c3    468 msm_pcie_enable: PCIe RC0 PHY is ready!
[   48.710619] c3    468 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   48.737407] c3    468 msm_pcie_enable: PCIe RC0 link initialized
[   48.753489] c3    468 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   48.761229] c3    468 cnss: runtime resume status: 0
[   48.854515] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[   48.854534] c0      0 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[   48.854558] c0      0 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[   48.854577] c0      0 ->action():           (null)
[   48.854587] c0      0    IRQ_NOPROBE set
[   48.854595] c0      0  IRQ_NOREQUEST set
[   48.854602] c0      0   IRQ_NOTHREAD set
[   48.914059] c3   2600 HTB: quantum of class 10010 is big. Consider r2q change.
[   48.940187] c3   2606 HTB: quantum of class 10010 is big. Consider r2q change.
[   48.956435] c3      0 NOHZ: local_softirq_pending 08
[   49.861975] c3      0 NOHZ: local_softirq_pending 08
[   51.400559] c0    266 wlan: [266:E :WDA]  scan complete - scan_id a001, vdev_id 0
[   51.401955] c0   1959 wlan: [1959:E :SME] Found 2 BSS, statusCode 0
[   51.591920] c2   1959 wlan: [1959:E :SME] csrSendJoinReqMsg: 13756: Connecting to ssid:PasaWiFiN bssid: 2c:30:33:48:36:ee rssi: -57 channel: 36 country_code: US
[   51.595589] c2   1959 wlan: [1959:E :WDA] wma_create_peer: Created peer with peer_addr 2c:30:33:48:36:ee vdev_id 0, peer_count - 1
[   51.642099] c2   1959 wlan: [1959:E :PE ] wlan_cfgGetInt: 356: Not valid cfg id 1
[   51.642904] c2   1959 wlan: [1959:E :WDA] wma_add_sta_req_sta_mode:statype 0 vdevid 0 aid 2 bssid 2c:30:33:48:36:ee staIdx 1 status 0
[   51.650348] c2   1959 wlan: [1959:E :HDD] ac:37:43:4a:2c:60 connected to 2c:30:33:48:36:ee
[   51.652563] c0      1 init: Service qti does not have a SELinux domain defined.
[   51.652594] c0      1 init: Starting service 'qti'...
[   51.653894] c1   2622 init: cannot execve('/vendor/bin/qti'): Permission denied
[   51.653971] c0    417 type=1400 audit(1485692565.139:76): avc: denied { execute_no_trans } for pid=2622 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   51.654889] c0      1 init: Service 'qti' (pid 2622) exited with status 127
[   51.654925] c0      1 init: Service 'qti' (pid 2622) killing any children in process group
[   51.702563] c1   2624 HTB: quantum of class 10001 is big. Consider r2q change.
[   51.704591] c3   1959 wlan: [1959:E :SME] csrRoamOffloadScan: 17414: Supplicant disabled driver roaming
[   51.711719] c0    417 type=1400 audit(1485692565.196:77): avc: granted { net_admin } for pid=2079 comm="lowi-server" capability=12 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   51.732249] c3   2625 HTB: quantum of class 10010 is big. Consider r2q change.
[   51.755140] c0    417 type=1400 audit(1485692565.239:78): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755289] c0    417 type=1400 audit(1485692565.239:79): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755353] c0    417 type=1400 audit(1485692565.239:80): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755415] c0    417 type=1400 audit(1485692565.239:81): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755476] c0    417 type=1400 audit(1485692565.239:82): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755538] c0    417 type=1400 audit(1485692565.239:83): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755597] c0    417 type=1400 audit(1485692565.239:84): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755658] c0    417 type=1400 audit(1485692565.239:85): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   51.755717] c0    417 type=1400 audit(1485692565.239:86): avc: granted { net_admin } for pid=659 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[   52.112258] c3      0 NOHZ: local_softirq_pending 08
[   52.180986] c2      0 NOHZ: local_softirq_pending 08
[   53.968866] c2   1127 ------------[ cut here ]------------
[   53.968895] c2   1127 WARNING: CPU: 2 PID: 1127 at ../../../../../../../../home/dp/lineage/14.1/kernel/google/marlin/net/sched/sch_api.c:1197 tc_qdisc_flow_control+0x140/0x170()
[   53.968908] c2   1127 tc_qdisc_flow_control(): called on bad queue
[   53.968923] c2   1127 CPU: 2 PID: 1127 Comm: netmgrd Tainted: G        W      3.18.31-Lineage-g97d0221-00003-gf925b57 #1
[   53.968934] c2   1127 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
[   53.968943] c2   1127 Call trace:
[   53.968958] c2   1127 [<ffffffc00008aab4>] dump_backtrace+0x0/0x23c
[   53.968968] c2   1127 [<ffffffc00008ad04>] show_stack+0x14/0x1c
[   53.968981] c2   1127 [<ffffffc000e3d2bc>] dump_stack+0x80/0xa4
[   53.968991] c2   1127 [<ffffffc0000a41d4>] warn_slowpath_common+0x88/0xb0
[   53.968999] c2   1127 [<ffffffc0000a4288>] warn_slowpath_fmt+0x60/0x80
[   53.969008] c2   1127 [<ffffffc000c9ac48>] tc_qdisc_flow_control+0x140/0x170
[   53.969020] c2   1127 [<ffffffc000e30a90>] rmnet_vnd_ioctl+0x230/0x5f4
[   53.969032] c2   1127 [<ffffffc000c8c41c>] dev_ifsioc+0x2c0/0x2f0
[   53.969041] c2   1127 [<ffffffc000c8cb00>] dev_ioctl+0x648/0x6c4
[   53.969051] c2   1127 [<ffffffc000c5babc>] sock_ioctl+0x4c/0x23c
[   53.969063] c2   1127 [<ffffffc0001b3dfc>] do_vfs_ioctl+0x4d0/0x5c4
[   53.969073] c2   1127 [<ffffffc0001b3f50>] SyS_ioctl+0x60/0x88
[   53.969329] c2   1127 ---[ end trace 6143182642ef75a0 ]---
[   53.990683] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[   53.990697] c0      0 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[   53.990714] c0      0 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[   53.990727] c0      0 ->action():           (null)
[   53.990733] c0      0    IRQ_NOPROBE set
[   53.990738] c0      0  IRQ_NOREQUEST set
[   53.990743] c0      0   IRQ_NOTHREAD set
[   54.717513] c3      0 ICMPv6: RA: ndisc_router_discovery failed to add default route
[   55.914545] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   55.916472] c0    266 cnss: runtime suspend status: 0
[   56.191281] c2      1 init: Service qti does not have a SELinux domain defined.
[   56.191384] c2      1 init: Starting service 'qti'...
[   56.194480] c0   2867 init: cannot execve('/vendor/bin/qti'): Permission denied
[   56.197835] c2      1 init: Service 'qti' (pid 2867) exited with status 127
[   56.197953] c2      1 init: Service 'qti' (pid 2867) killing any children in process group
[   56.198954] c2    417 type=1400 audit(1485692569.679:87): avc: denied { execute_no_trans } for pid=2867 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   56.788204] c2     81 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   56.789078] c2     81 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   56.797276] c2     81 msm_pcie_enable: PCIe RC0 PHY is ready!
[   56.807753] c2     81 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   56.837033] c2     81 msm_pcie_enable: PCIe RC0 link initialized
[   56.853765] c2     81 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   56.863946] c2     81 cnss: runtime resume status: 0
[   57.600461] c3      0 ICMPv6: RA: ndisc_router_discovery failed to add default route
[   57.765370] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   57.770885] c0    266 cnss: runtime suspend status: 0
[   57.783624] c0    266 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   57.784425] c0    266 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   57.789623] c0    266 msm_pcie_enable: PCIe RC0 PHY is ready!
[   57.800002] c0    266 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   57.827998] c0    266 msm_pcie_enable: PCIe RC0 link initialized
[   57.843787] c0    266 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   57.851998] c0    266 cnss: runtime resume status: 0
[   58.610478] c1    278 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   58.619258] c1    278 cnss: runtime suspend status: 0
[   59.083977] c1    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 4
[   59.306428] c1    470 [BATT] fb_notifier_callback-> display is Off
[   59.306431] c1    259 [BATT] batt_worker: total_time since last batt update = 52940 ms.
[   59.310317] c2    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time modify!
[   59.310402] c2    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[   59.310437] c2    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[   59.310477] c2    259 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
[   59.310561] c2    259 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 59310572937 (2017-01-29 12:22:52.798106989 UTC)
[   59.310626] c2    259 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 59310634187 (2017-01-29 12:22:52.798186937 UTC)
[   59.317482] c2    259 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3495687uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=17mA
[   59.317821] c2    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[   59.317883] c2    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[   59.327925] c3    259 [BATT] ID=3,level=100,level_raw=100,vol=4373mV,temp=345,current=13427uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5056mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=316,usb_overheat=0,level_accu=0 at 59327933303 (2017-01-29 12:22:52.815446105 UTC)
[   59.327994] c3    259 [BATT] Device is at booting stage at 59327996689 (2017-01-29 12:22:52.815538553 UTC)
[   59.416825] c2     81 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   59.417136] c2     81 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   59.421029] c2     81 msm_pcie_enable: PCIe RC0 PHY is ready!
[   59.431216] c2     81 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   59.458859] c2     81 msm_pcie_enable: PCIe RC0 link initialized
[   59.473744] c2     81 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   59.481315] c2     81 cnss: runtime resume status: 0
[   61.206326] c2      1 init: Service qti does not have a SELinux domain defined.
[   61.206447] c2      1 init: Starting service 'qti'...
[   61.210753] c0   2876 init: cannot execve('/vendor/bin/qti'): Permission denied
[   61.210924] c2    417 type=1400 audit(1485692574.696:88): avc: denied { execute_no_trans } for pid=2876 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   61.213176] c2      1 init: Service 'qti' (pid 2876) exited with status 127
[   61.213277] c2      1 init: Service 'qti' (pid 2876) killing any children in process group
[   62.019222] c0    502 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   62.023215] c0    502 cnss: runtime suspend status: 0
[   63.181340] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   63.182235] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   63.188004] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[   63.198472] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   63.226068] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[   63.244945] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   63.252951] c0      0 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[   63.253010] c0      0 wlan: [0:E :WDA] Ether Type: 0x0800
[   63.253054] c0      0 wlan: [0:E :WDA] IPV4_proto_type: 6
[   63.253098] c0      0 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[   63.253139] c0      0 wlan: [0:E :WDA] len: 83 sport: 443 dport: 48456
[   63.253657] c0      0 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[   63.255513] c0    502 cnss: runtime resume status: 0
[   63.414619] c1    261 FG: fg_is_batt_id_valid: fg batt sts 0x8
[   63.998886] c3     83 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   64.001853] c3     83 cnss: runtime suspend status: 0
[   65.494430] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-213, is_full_count=1, is_full=0 at 65494466522 (2017-01-29 12:22:58.981957240 UTC)
[   66.221372] c2      1 init: Service qti does not have a SELinux domain defined.
[   66.221483] c2      1 init: Starting service 'qti'...
[   66.226033] c0   2877 init: cannot execve('/vendor/bin/qti'): Permission denied
[   66.228248] c0    417 type=1400 audit(1485692579.709:89): avc: denied { execute_no_trans } for pid=2877 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   66.228562] c2      1 init: Service 'qti' (pid 2877) exited with status 127
[   66.228661] c2      1 init: Service 'qti' (pid 2877) killing any children in process group
[   71.237382] c2      1 init: Service qti does not have a SELinux domain defined.
[   71.237500] c2      1 init: Starting service 'qti'...
[   71.241601] c1   2885 init: cannot execve('/vendor/bin/qti'): Permission denied
[   71.241666] c0    417 type=1400 audit(1485692584.726:90): avc: denied { execute_no_trans } for pid=2885 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   71.244467] c0      1 init: Service 'qti' (pid 2885) exited with status 127
[   71.244583] c0      1 init: Service 'qti' (pid 2885) killing any children in process group
[   71.469189] c0   2200 qpnp_led.red: b:00 on:50 off:0
[   71.469370] c0   2200 qpnp_led.green: b:0f on:50 off:0
[   71.469681] c0   2200 qpnp_led.blue: b:00 on:50 off:0
[   71.471300] c0   2200 qpnp_led.red: b:00 on:50 off:0
[   71.471423] c0   2200 qpnp_led.green: b:0f on:50 off:0
[   71.472730] c0   2200 qpnp_led.blue: b:00 on:50 off:0
[   71.477598] c0   2200 qpnp_led.red: b:00 on:50 off:0
[   71.477768] c0   2200 qpnp_led.green: b:0f on:50 off:0
[   71.479096] c0   2200 qpnp_led.blue: b:00 on:50 off:0
[   76.576167] c0      1 init: Service qti does not have a SELinux domain defined.
[   76.576281] c0      1 init: Starting service 'qti'...
[   76.586227] c0   2890 init: cannot execve('/vendor/bin/qti'): Permission denied
[   76.591049] c0      1 init: Service 'qti' (pid 2890) exited with status 127
[   76.591165] c0      1 init: Service 'qti' (pid 2890) killing any children in process group
[   76.592830] c0    417 type=1400 audit(1485692590.069:91): avc: denied { execute_no_trans } for pid=2890 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   81.599291] c0      1 init: Service qti does not have a SELinux domain defined.
[   81.599409] c0      1 init: Starting service 'qti'...
[   81.607202] c1   2891 init: cannot execve('/vendor/bin/qti'): Permission denied
[   81.607706] c0    417 type=1400 audit(1485692595.089:92): avc: denied { execute_no_trans } for pid=2891 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   81.611437] c0      1 init: Service 'qti' (pid 2891) exited with status 127
[   81.611559] c0      1 init: Service 'qti' (pid 2891) killing any children in process group
[   85.547061] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-213, is_full_count=2, is_full=0 at 85547102634 (2017-01-29 12:23:19.034602884 UTC)
[   86.255263] c1      1 init: Service qti does not have a SELinux domain defined.
[   86.255380] c1      1 init: Starting service 'qti'...
[   86.262668] c1   2910 init: cannot execve('/vendor/bin/qti'): Permission denied
[   86.262776] c0    417 type=1400 audit(1485692599.746:93): avc: denied { execute_no_trans } for pid=2910 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   86.265621] c1      1 init: Service 'qti' (pid 2910) exited with status 127
[   86.265736] c1      1 init: Service 'qti' (pid 2910) killing any children in process group
[   90.723768] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   90.724636] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   90.733832] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[   90.744379] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   90.772103] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[   90.790518] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   90.798731] c0    416 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[   90.798789] c0    416 wlan: [0:E :WDA] Ether Type: 0x0800
[   90.798832] c0    416 wlan: [0:E :WDA] IPV4_proto_type: 6
[   90.798874] c0    416 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[   90.798915] c0    416 wlan: [0:E :WDA] len: 525 sport: 443 dport: 45706
[   90.799269] c0    785 cnss: runtime resume status: 0
[   90.799427] c0    785 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[   91.275041] c1      1 init: Service qti does not have a SELinux domain defined.
[   91.275202] c1      1 init: Starting service 'qti'...
[   91.282688] c1    417 type=1400 audit(1485692604.766:94): avc: denied { execute_no_trans } for pid=2911 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   91.284257] c1   2911 init: cannot execve('/vendor/bin/qti'): Permission denied
[   91.287134] c1      1 init: Service 'qti' (pid 2911) exited with status 127
[   91.287245] c1      1 init: Service 'qti' (pid 2911) killing any children in process group
[   91.556297] c0    785 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   91.562011] c0    785 cnss: runtime suspend status: 0
[   93.494823] c1    278 FG: fg_is_batt_id_valid: fg batt sts 0x8
[   95.827125] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   95.828127] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   95.833791] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[   95.844235] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   95.871984] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[   95.890718] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   95.903922] c0    502 cnss: runtime resume status: 0
[   96.295575] c1      1 init: Service qti does not have a SELinux domain defined.
[   96.295692] c1      1 init: Starting service 'qti'...
[   96.301027] c0   2912 init: cannot execve('/vendor/bin/qti'): Permission denied
[   96.303652] c0      1 init: Service 'qti' (pid 2912) exited with status 127
[   96.303751] c0      1 init: Service 'qti' (pid 2912) killing any children in process group
[   96.305263] c0    417 type=1400 audit(1485692609.783:95): avc: denied { execute_no_trans } for pid=2912 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[   96.884781] c2     17 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   96.889706] c2     17 cnss: runtime suspend status: 0
[  101.311882] c0      1 init: Service qti does not have a SELinux domain defined.
[  101.311991] c0      1 init: Starting service 'qti'...
[  101.315672] c1   2921 init: cannot execve('/vendor/bin/qti'): Permission denied
[  101.318316] c0      1 init: Service 'qti' (pid 2921) exited with status 127
[  101.318428] c0      1 init: Service 'qti' (pid 2921) killing any children in process group
[  101.319671] c0    417 type=1400 audit(1485692614.799:96): avc: denied { execute_no_trans } for pid=2921 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  101.541231] c1    261 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  101.542161] c1    261 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  101.547963] c1    261 msm_pcie_enable: PCIe RC0 PHY is ready!
[  101.558450] c1    261 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  101.586090] c1    261 msm_pcie_enable: PCIe RC0 link initialized
[  101.603999] c1    261 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  101.615790] c1    261 cnss: runtime resume status: 0
[  103.167909] c1    261 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  103.170875] c1    261 cnss: runtime suspend status: 0
[  103.933656] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  103.934491] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  103.942594] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[  103.953070] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  103.980655] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[  104.000485] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  104.008407] c0    416 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[  104.008464] c0    416 wlan: [0:E :WDA] Ether Type: 0x0800
[  104.008507] c0    416 wlan: [0:E :WDA] IPV4_proto_type: 6
[  104.008547] c0    416 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[  104.008589] c0    416 wlan: [0:E :WDA] len: 83 sport: 443 dport: 37658
[  104.009116] c0   1959 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[  104.016250] c0    785 cnss: runtime resume status: 0
[  104.771870] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  104.776487] c0    266 cnss: runtime suspend status: 0
[  105.600391] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-177, is_full_count=3, is_full=1 at 105600432131 (2017-01-29 12:23:39.087919621 UTC)
[  106.327390] c0      1 init: Service qti does not have a SELinux domain defined.
[  106.327572] c0      1 init: Starting service 'qti'...
[  106.335673] c0   2925 init: cannot execve('/vendor/bin/qti'): Permission denied
[  106.338391] c0      1 init: Service 'qti' (pid 2925) exited with status 127
[  106.338499] c0      1 init: Service 'qti' (pid 2925) killing any children in process group
[  106.340213] c0    417 type=1400 audit(1485692619.819:97): avc: denied { execute_no_trans } for pid=2925 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  107.133778] c1    261 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  107.134670] c1    261 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  107.140333] c1    261 msm_pcie_enable: PCIe RC0 PHY is ready!
[  107.150999] c1    261 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  107.178873] c1    261 msm_pcie_enable: PCIe RC0 link initialized
[  107.197464] c1    261 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  107.209405] c1    261 cnss: runtime resume status: 0
[  108.052552] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  108.057287] c0    266 cnss: runtime suspend status: 0
[  111.346064] c0      1 init: Service qti does not have a SELinux domain defined.
[  111.346167] c0      1 init: Starting service 'qti'...
[  111.351052] c0   2928 init: cannot execve('/vendor/bin/qti'): Permission denied
[  111.353001] c0      1 init: Service 'qti' (pid 2928) exited with status 127
[  111.353094] c0      1 init: Service 'qti' (pid 2928) killing any children in process group
[  111.354693] c0    417 type=1400 audit(1485692624.836:98): avc: denied { execute_no_trans } for pid=2928 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  116.361502] c0      1 init: Service qti does not have a SELinux domain defined.
[  116.361621] c0      1 init: Starting service 'qti'...
[  116.367654] c0   2933 init: cannot execve('/vendor/bin/qti'): Permission denied
[  116.367698] c1    417 type=1400 audit(1485692629.853:99): avc: denied { execute_no_trans } for pid=2933 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  116.370263] c0      1 init: Service 'qti' (pid 2933) exited with status 127
[  116.370369] c0      1 init: Service 'qti' (pid 2933) killing any children in process group
[  119.521488] c1    260 [BATT] batt_worker: total_time since last batt update = 60216 ms.
[  119.525156] c0    260 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  119.525215] c0    260 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  119.525310] c0    260 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 119525327790 (2017-01-29 12:23:53.012862831 UTC)
[  119.525373] c0    260 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 119525387477 (2017-01-29 12:23:53.012941217 UTC)
[  119.529353] c0    260 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3498946uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  119.529645] c0    260 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  119.529709] c0    260 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  119.536437] c0    260 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=335,current=-177763uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5118mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=312,usb_overheat=0,level_accu=0 at 119536477582 (2017-01-29 12:23:53.023916947 UTC)
[  119.536522] c0    260 [BATT] Device is at booting stage at 119536536801 (2017-01-29 12:23:53.024096947 UTC)
[  121.378804] c0      1 init: Service qti does not have a SELinux domain defined.
[  121.378923] c0      1 init: Starting service 'qti'...
[  121.384338] c0   2934 init: cannot execve('/vendor/bin/qti'): Permission denied
[  121.384414] c1    417 type=1400 audit(1485692634.869:100): avc: denied { execute_no_trans } for pid=2934 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  121.386913] c0      1 init: Service 'qti' (pid 2934) exited with status 127
[  121.387019] c0      1 init: Service 'qti' (pid 2934) killing any children in process group
[  123.574715] c1    278 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  125.654481] c1    358 [BATT] chg_full_check_worker: vol:4400, curr=-161, is_eoc_count=0, is_full=1, is_eoc=0 at 125654528504 (2017-01-29 12:23:59.142012816 UTC)
[  126.395344] c0      1 init: Service qti does not have a SELinux domain defined.
[  126.395462] c0      1 init: Starting service 'qti'...
[  126.401148] c0   2935 init: cannot execve('/vendor/bin/qti'): Permission denied
[  126.401404] c1    417 type=1400 audit(1485692639.886:101): avc: denied { execute_no_trans } for pid=2935 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  126.403776] c0      1 init: Service 'qti' (pid 2935) exited with status 127
[  126.403885] c0      1 init: Service 'qti' (pid 2935) killing any children in process group
[  131.412287] c0      1 init: Service qti does not have a SELinux domain defined.
[  131.412405] c0      1 init: Starting service 'qti'...
[  131.419856] c0   2936 init: cannot execve('/vendor/bin/qti'): Permission denied
[  131.420493] c1    417 type=1400 audit(1485692644.903:102): avc: denied { execute_no_trans } for pid=2936 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  131.422599] c0      1 init: Service 'qti' (pid 2936) exited with status 127
[  131.422711] c0      1 init: Service 'qti' (pid 2936) killing any children in process group
[  136.431814] c0      1 init: Service qti does not have a SELinux domain defined.
[  136.431935] c0      1 init: Starting service 'qti'...
[  136.437476] c0   2937 init: cannot execve('/vendor/bin/qti'): Permission denied
[  136.437586] c1    417 type=1400 audit(1485692649.923:103): avc: denied { execute_no_trans } for pid=2937 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  136.439896] c0      1 init: Service 'qti' (pid 2937) exited with status 127
[  136.440203] c0      1 init: Service 'qti' (pid 2937) killing any children in process group
[  139.340618] c2    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
[  139.378431] c0    254 [TP]:[NS]: IM:2(M-2), CIDIM:1(M-1), Freq:0, NS:1
[  139.440212] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  139.440457] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  139.444275] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[  139.454428] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  139.481302] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[  139.496897] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  139.505300] c0    502 cnss: runtime resume status: 0
[  139.549290] c0    470 [BATT] fb_notifier_callback-> display is On
[  139.549291] c2    516 [BATT] batt_worker: total_time since last batt update = 20026 ms.
[  139.552006] c2    516 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  139.552026] c2    516 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  139.552055] c2    516 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 139552059889 (2017-01-29 12:24:13.039628941 UTC)
[  139.552073] c2    516 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 139552076555 (2017-01-29 12:24:13.039650868 UTC)
[  139.554804] c2    516 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3500329uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  139.555021] c2    516 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  139.555038] c2    516 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  139.568495] c2    516 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=332,current=-161742uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4933mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=312,usb_overheat=0,level_accu=0 at 139568507390 (2017-01-29 12:24:13.056038890 UTC)
[  139.661652] c0    785 wlan: [785:E :WDA]  scan complete - scan_id a002, vdev_id 0
[  139.661753] c1   1959 wlan: [1959:E :SME] Found 1 BSS, statusCode 0
[  140.287613] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  140.289314] c0    266 cnss: runtime suspend status: 0
[  141.446851] c0      1 init: Service qti does not have a SELinux domain defined.
[  141.446886] c0      1 init: Starting service 'qti'...
[  141.448537] c0   2940 init: cannot execve('/vendor/bin/qti'): Permission denied
[  141.448683] c1    417 type=1400 audit(1485692654.933:104): avc: denied { execute_no_trans } for pid=2940 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  141.449445] c0      1 init: Service 'qti' (pid 2940) exited with status 127
[  141.449479] c0      1 init: Service 'qti' (pid 2940) killing any children in process group
[  141.799609] c1    519 tfa98xx_spk_event(): event 2
[  141.818759] c0    516 sps: BAM device 0x0000000007584000 is not registered yet.
[  141.819101] c0    516 sps:BAM 0x0000000007584000 is registered.
[  141.820298] c0    516 sps:BAM 0x0000000007584000 (va:0xffffff800ab80000) enabled: ver:0x19, number of pipes:24
[  142.464352] c1    470 No change in context(0==0), skip
[  142.526732] c1    261 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  142.526952] c1    261 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  142.530544] c1    261 msm_pcie_enable: PCIe RC0 PHY is ready!
[  142.542375] c1    261 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  142.570686] c1    261 msm_pcie_enable: PCIe RC0 link initialized
[  142.590159] c1    261 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  142.596873] c1    261 cnss: runtime resume status: 0
[  144.136933] c0    502 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  144.140332] c0    502 cnss: runtime suspend status: 0
[  145.000740] c1    519 tfa98xx_spk_event(): event 4
[  145.623726] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  145.624598] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  145.630511] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[  145.641139] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  145.668883] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[  145.687224] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  145.701308] c0    785 cnss: runtime resume status: 0
[  145.707075] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-161, is_eoc_count=0, is_full=1, is_eoc=0 at 145707123731 (2017-01-29 12:24:19.194613981 UTC)
[  146.456598] c0      1 init: Service qti does not have a SELinux domain defined.
[  146.457088] c0      1 init: Starting service 'qti'...
[  146.460318] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  146.461816] c0   2950 init: cannot execve('/vendor/bin/qti'): Permission denied
[  146.461847] c1    417 type=1400 audit(1485692659.946:105): avc: denied { execute_no_trans } for pid=2950 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  146.464576] c0      1 init: Service 'qti' (pid 2950) exited with status 127
[  146.464686] c0      1 init: Service 'qti' (pid 2950) killing any children in process group
[  146.468162] c0    266 cnss: runtime suspend status: 0
[  148.746962] c0    266 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  148.747836] c0    266 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  148.753879] c0    266 msm_pcie_enable: PCIe RC0 PHY is ready!
[  148.764520] c0    266 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  148.792317] c0    266 msm_pcie_enable: PCIe RC0 link initialized
[  148.810745] c0    266 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  148.821527] c0    266 cnss: runtime resume status: 0
[  149.512228] c1    261 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  149.517903] c1    261 cnss: runtime suspend status: 0
[  150.833657] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  150.834523] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  150.840298] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[  150.850957] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  150.878656] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[  150.897204] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  150.905700] c0      0 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[  150.905880] c0      0 wlan: [0:E :WDA] Ether Type: 0x0800
[  150.905949] c0      0 wlan: [0:E :WDA] IPV4_proto_type: 6
[  150.905994] c0      0 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[  150.906035] c0      0 wlan: [0:E :WDA] len: 98 sport: 443 dport: 38213
[  150.906496] c0      3 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[  150.910205] c0    502 cnss: runtime resume status: 0
[  151.471641] c0      1 init: Service qti does not have a SELinux domain defined.
[  151.471747] c0      1 init: Starting service 'qti'...
[  151.478243] c0   2951 init: cannot execve('/vendor/bin/qti'): Permission denied
[  151.478280] c1    417 type=1400 audit(1485692664.963:106): avc: denied { execute_no_trans } for pid=2951 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  151.481047] c0      1 init: Service 'qti' (pid 2951) exited with status 127
[  151.481150] c0      1 init: Service 'qti' (pid 2951) killing any children in process group
[  151.675416] c1    261 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  151.678160] c1    261 cnss: runtime suspend status: 0
[  151.860266] c1    261 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  151.860825] c1    261 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  151.865853] c1    261 msm_pcie_enable: PCIe RC0 PHY is ready!
[  151.876179] c1    261 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  151.903671] c1    261 msm_pcie_enable: PCIe RC0 link initialized
[  151.920474] c1    261 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  151.929823] c1    261 cnss: runtime resume status: 0
[  151.962710] c0    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 4
[  152.187362] c0    470 [BATT] fb_notifier_callback-> display is Off
[  152.187365] c3     49 [BATT] batt_worker: total_time since last batt update = 12640 ms.
[  152.192476] c2     49 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  152.192532] c2     49 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  152.192675] c2     49 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 152192694481 (2017-01-29 12:24:25.680232023 UTC)
[  152.192738] c2     49 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 152192754794 (2017-01-29 12:24:25.680307960 UTC)
[  152.197349] c2     49 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3500329uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  152.197643] c2     49 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  152.197694] c2     49 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  152.232903] c2     49 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=330,current=-161742uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5103mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=312,usb_overheat=0,level_accu=0 at 152232933912 (2017-01-29 12:24:25.720408954 UTC)
[  153.479642] c1    278 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  153.485350] c1    278 cnss: runtime suspend status: 0
[  153.654078] c1    358 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  155.937877] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  155.938764] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  155.944465] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[  155.954972] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  155.982689] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[  156.000623] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  156.011976] c0    502 cnss: runtime resume status: 0
[  156.188292] c0      1 init: Service qti does not have a SELinux domain defined.
[  156.188410] c0      1 init: Starting service 'qti'...
[  156.194441] c0   2956 init: cannot execve('/vendor/bin/qti'): Permission denied
[  156.194773] c1    417 type=1400 audit(1485692669.679:107): avc: denied { execute_no_trans } for pid=2956 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  156.197779] c0      1 init: Service 'qti' (pid 2956) exited with status 127
[  156.197891] c0      1 init: Service 'qti' (pid 2956) killing any children in process group
[  156.896376] c3     83 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  156.899286] c3     83 cnss: runtime suspend status: 0
[  161.205642] c0      1 init: Service qti does not have a SELinux domain defined.
[  161.205764] c0      1 init: Starting service 'qti'...
[  161.212784] c1    417 type=1400 audit(1485692674.696:108): avc: denied { execute_no_trans } for pid=2961 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  161.214011] c1   2961 init: cannot execve('/vendor/bin/qti'): Permission denied
[  161.217042] c0      1 init: Service 'qti' (pid 2961) exited with status 127
[  161.217160] c0      1 init: Service 'qti' (pid 2961) killing any children in process group
[  161.831428] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  161.832310] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  161.838038] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[  161.848617] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  161.876296] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[  161.893843] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  161.908367] c0    785 cnss: runtime resume status: 0
[  162.528613] c0    502 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  162.531434] c0    502 cnss: runtime suspend status: 0
[  162.714700] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  162.715584] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  162.721386] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[  162.732014] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  162.759761] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[  162.777262] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  162.785771] c0      0 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[  162.785930] c0      0 wlan: [0:E :WDA] Ether Type: 0x0800
[  162.786000] c0      0 wlan: [0:E :WDA] IPV4_proto_type: 6
[  162.786067] c0      0 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[  162.786110] c0      0 wlan: [0:E :WDA] len: 98 sport: 443 dport: 38210
[  162.786583] c0      3 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[  162.792825] c0    502 cnss: runtime resume status: 0
[  163.549152] c0    502 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  163.551877] c0    502 cnss: runtime suspend status: 0
[  165.761357] c1    358 [BATT] chg_full_check_worker: vol:4400, curr=-152, is_eoc_count=0, is_full=1, is_eoc=0 at 165761437083 (2017-01-29 12:24:39.248886291 UTC)
[  166.225658] c0      1 init: Service qti does not have a SELinux domain defined.
[  166.225777] c0      1 init: Starting service 'qti'...
[  166.232715] c1    417 type=1400 audit(1485692679.716:109): avc: denied { execute_no_trans } for pid=2966 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  166.234065] c1   2966 init: cannot execve('/vendor/bin/qti'): Permission denied
[  166.236651] c0      1 init: Service 'qti' (pid 2966) exited with status 127
[  166.237015] c0      1 init: Service 'qti' (pid 2966) killing any children in process group
[  171.245454] c0      1 init: Service qti does not have a SELinux domain defined.
[  171.245574] c0      1 init: Starting service 'qti'...
[  171.252623] c1   2967 init: cannot execve('/vendor/bin/qti'): Permission denied
[  171.255057] c1    417 type=1400 audit(1485692684.736:110): avc: denied { execute_no_trans } for pid=2967 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  171.255633] c0      1 init: Service 'qti' (pid 2967) exited with status 127
[  171.255732] c0      1 init: Service 'qti' (pid 2967) killing any children in process group
[  176.264873] c0      1 init: Service qti does not have a SELinux domain defined.
[  176.264994] c0      1 init: Starting service 'qti'...
[  176.269390] c0    417 type=1400 audit(1485692689.753:111): avc: denied { execute_no_trans } for pid=2968 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  176.270491] c0   2968 init: cannot execve('/vendor/bin/qti'): Permission denied
[  176.273308] c0      1 init: Service 'qti' (pid 2968) exited with status 127
[  176.273865] c0      1 init: Service 'qti' (pid 2968) killing any children in process group
[  180.016941] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  180.017818] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  180.023783] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[  180.034389] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  180.062127] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[  180.081608] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  180.089814] c0      0 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[  180.090412] c0      0 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[  180.090463] c0      0 wlan: [0:E :WDA] Ether Type: 0x0800
[  180.090562] c0      0 wlan: [0:E :WDA] IPV4_proto_type: 6
[  180.090607] c0      0 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[  180.090648] c0      0 wlan: [0:E :WDA] len: 52 sport: 443 dport: 38663
[  180.091955] c0    785 cnss: runtime resume status: 0
[  180.846087] c2     17 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  180.850255] c2     17 cnss: runtime suspend status: 0
[  181.282312] c0      1 init: Service qti does not have a SELinux domain defined.
[  181.282435] c0      1 init: Starting service 'qti'...
[  181.288798] c0    417 type=1400 audit(1485692694.773:112): avc: denied { execute_no_trans } for pid=2969 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  181.290686] c0   2969 init: cannot execve('/vendor/bin/qti'): Permission denied
[  181.293325] c0      1 init: Service 'qti' (pid 2969) exited with status 127
[  181.293741] c0      1 init: Service 'qti' (pid 2969) killing any children in process group
[  183.734779] c1    278 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  185.107208] c0    502 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  185.108141] c0    502 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  185.113798] c0    502 msm_pcie_enable: PCIe RC0 PHY is ready!
[  185.124411] c0    502 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  185.152145] c0    502 msm_pcie_enable: PCIe RC0 link initialized
[  185.171536] c0    502 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  185.182680] c0    502 cnss: runtime resume status: 0
[  185.814574] c1    358 [BATT] chg_full_check_worker: vol:4400, curr=-143, is_eoc_count=0, is_full=1, is_eoc=0 at 185814624602 (2017-01-29 12:24:59.302106987 UTC)
[  186.171991] c2     81 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  186.175637] c2     81 cnss: runtime suspend status: 0
[  186.302242] c0      1 init: Service qti does not have a SELinux domain defined.
[  186.302365] c0      1 init: Starting service 'qti'...
[  186.308776] c0    417 type=1400 audit(1485692699.793:113): avc: denied { execute_no_trans } for pid=2970 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  186.310671] c0   2970 init: cannot execve('/vendor/bin/qti'): Permission denied
[  186.313220] c0      1 init: Service 'qti' (pid 2970) exited with status 127
[  186.313690] c0      1 init: Service 'qti' (pid 2970) killing any children in process group
[  191.322081] c0      1 init: Service qti does not have a SELinux domain defined.
[  191.322199] c0      1 init: Starting service 'qti'...
[  191.329123] c1   2971 init: cannot execve('/vendor/bin/qti'): Permission denied
[  191.330816] c1    417 type=1400 audit(1485692704.813:114): avc: denied { execute_no_trans } for pid=2971 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  191.335187] c0      1 init: Service 'qti' (pid 2971) exited with status 127
[  191.335321] c0      1 init: Service 'qti' (pid 2971) killing any children in process group
[  196.344306] c0      1 init: Service qti does not have a SELinux domain defined.
[  196.344428] c0      1 init: Starting service 'qti'...
[  196.348796] c0   2972 init: cannot execve('/vendor/bin/qti'): Permission denied
[  196.348858] c1    417 type=1400 audit(1485692709.833:115): avc: denied { execute_no_trans } for pid=2972 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  196.351571] c0      1 init: Service 'qti' (pid 2972) exited with status 127
[  196.351697] c0      1 init: Service 'qti' (pid 2972) killing any children in process group
[  201.361107] c0      1 init: Service qti does not have a SELinux domain defined.
[  201.361232] c0      1 init: Starting service 'qti'...
[  201.366403] c0   2973 init: cannot execve('/vendor/bin/qti'): Permission denied
[  201.366494] c1    417 type=1400 audit(1485692714.849:116): avc: denied { execute_no_trans } for pid=2973 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  201.369288] c0      1 init: Service 'qti' (pid 2973) exited with status 127
[  201.369402] c0      1 init: Service 'qti' (pid 2973) killing any children in process group
[  205.867784] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-143, is_eoc_count=0, is_full=1, is_eoc=0 at 205867884828 (2017-01-29 12:25:19.355322161 UTC)
[  206.378483] c0      1 init: Service qti does not have a SELinux domain defined.
[  206.378631] c0      1 init: Starting service 'qti'...
[  206.385805] c0   2974 init: cannot execve('/vendor/bin/qti'): Permission denied
[  206.385931] c1    417 type=1400 audit(1485692719.869:117): avc: denied { execute_no_trans } for pid=2974 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  206.388913] c0      1 init: Service 'qti' (pid 2974) exited with status 127
[  206.389025] c0      1 init: Service 'qti' (pid 2974) killing any children in process group
[  211.398255] c0      1 init: Service qti does not have a SELinux domain defined.
[  211.398370] c0      1 init: Starting service 'qti'...
[  211.402922] c0    417 type=1400 audit(1485692724.886:118): avc: denied { execute_no_trans } for pid=2975 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  211.404025] c0   2975 init: cannot execve('/vendor/bin/qti'): Permission denied
[  211.407166] c0      1 init: Service 'qti' (pid 2975) exited with status 127
[  211.407304] c0      1 init: Service 'qti' (pid 2975) killing any children in process group
[  212.321463] c2     49 [BATT] batt_worker: total_time since last batt update = 60133 ms.
[  212.325088] c1     49 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  212.325146] c1     49 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  212.325238] c1     49 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 212325263961 (2017-01-29 12:25:25.812800461 UTC)
[  212.325302] c1     49 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 212325324326 (2017-01-29 12:25:25.812878586 UTC)
[  212.329039] c1     49 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3502874uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  212.329330] c1     49 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  212.329392] c1     49 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  212.336690] c1     49 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=325,current=-143736uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5124mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=311,usb_overheat=0,level_accu=0 at 212336954640 (2017-01-29 12:25:25.824186244 UTC)
[  213.814502] c1    261 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  216.415895] c0      1 init: Service qti does not have a SELinux domain defined.
[  216.416015] c0      1 init: Starting service 'qti'...
[  216.422440] c0    417 type=1400 audit(1485692729.906:119): avc: denied { execute_no_trans } for pid=2976 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  216.424030] c0   2976 init: cannot execve('/vendor/bin/qti'): Permission denied
[  216.426456] c0      1 init: Service 'qti' (pid 2976) exited with status 127
[  216.426561] c0      1 init: Service 'qti' (pid 2976) killing any children in process group
[  221.435259] c0      1 init: Service qti does not have a SELinux domain defined.
[  221.435375] c0      1 init: Starting service 'qti'...
[  221.442777] c0   2977 init: cannot execve('/vendor/bin/qti'): Permission denied
[  221.445771] c0      1 init: Service 'qti' (pid 2977) exited with status 127
[  221.445784] c1    417 type=1400 audit(1485692734.926:120): avc: denied { execute_no_trans } for pid=2977 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  221.445924] c0      1 init: Service 'qti' (pid 2977) killing any children in process group
[  222.320500] c2     17 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  222.321393] c2     17 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  222.327206] c2     17 msm_pcie_enable: PCIe RC0 PHY is ready!
[  222.337720] c2     17 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  222.365292] c2     17 msm_pcie_enable: PCIe RC0 link initialized
[  222.384928] c2     17 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  222.395939] c2     17 cnss: runtime resume status: 0
[  223.045992] c0    785 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  223.048681] c0    785 cnss: runtime suspend status: 0
[  225.921317] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-139, is_eoc_count=0, is_full=1, is_eoc=0 at 225921374587 (2017-01-29 12:25:39.408851347 UTC)
[  226.454997] c0      1 init: Service qti does not have a SELinux domain defined.
[  226.455111] c0      1 init: Starting service 'qti'...
[  226.459565] c0    417 type=1400 audit(1485692739.943:121): avc: denied { execute_no_trans } for pid=2978 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  226.460667] c0   2978 init: cannot execve('/vendor/bin/qti'): Permission denied
[  226.463774] c0      1 init: Service 'qti' (pid 2978) exited with status 127
[  226.463912] c0      1 init: Service 'qti' (pid 2978) killing any children in process group
[  231.472566] c0      1 init: Service qti does not have a SELinux domain defined.
[  231.472685] c0      1 init: Starting service 'qti'...
[  231.479722] c1    417 type=1400 audit(1485692744.963:122): avc: denied { execute_no_trans } for pid=2979 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  231.480740] c1   2979 init: cannot execve('/vendor/bin/qti'): Permission denied
[  231.483775] c0      1 init: Service 'qti' (pid 2979) exited with status 127
[  231.483891] c0      1 init: Service 'qti' (pid 2979) killing any children in process group
[  236.492363] c0      1 init: Service qti does not have a SELinux domain defined.
[  236.492481] c0      1 init: Starting service 'qti'...
[  236.499595] c1    417 type=1400 audit(1485692749.983:123): avc: denied { execute_no_trans } for pid=2980 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  236.500644] c1   2980 init: cannot execve('/vendor/bin/qti'): Permission denied
[  236.503603] c0      1 init: Service 'qti' (pid 2980) exited with status 127
[  236.503721] c0      1 init: Service 'qti' (pid 2980) killing any children in process group
[  241.512114] c0      1 init: Service qti does not have a SELinux domain defined.
[  241.512232] c0      1 init: Starting service 'qti'...
[  241.520190] c1   2981 init: cannot execve('/vendor/bin/qti'): Permission denied
[  241.520268] c0    417 type=1400 audit(1485692755.003:124): avc: denied { execute_no_trans } for pid=2981 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  241.522929] c0      1 init: Service 'qti' (pid 2981) exited with status 127
[  241.523054] c0      1 init: Service 'qti' (pid 2981) killing any children in process group
[  243.894598] c1    261 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  245.974322] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-133, is_eoc_count=0, is_full=1, is_eoc=0 at 245974374761 (2017-01-29 12:25:59.461871521 UTC)
[  246.531667] c0      1 init: Service qti does not have a SELinux domain defined.
[  246.531785] c0      1 init: Starting service 'qti'...
[  246.537997] c0   2982 init: cannot execve('/vendor/bin/qti'): Permission denied
[  246.540525] c0      1 init: Service 'qti' (pid 2982) exited with status 127
[  246.540627] c0      1 init: Service 'qti' (pid 2982) killing any children in process group
[  246.542158] c0    417 type=1400 audit(1485692760.023:125): avc: denied { execute_no_trans } for pid=2982 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  251.547705] c0      1 init: Service qti does not have a SELinux domain defined.
[  251.547794] c0      1 init: Starting service 'qti'...
[  251.550833] c1   2983 init: cannot execve('/vendor/bin/qti'): Permission denied
[  251.551373] c0    417 type=1400 audit(1485692765.036:126): avc: denied { execute_no_trans } for pid=2983 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  251.552567] c0      1 init: Service 'qti' (pid 2983) exited with status 127
[  251.552660] c0      1 init: Service 'qti' (pid 2983) killing any children in process group
[  256.560500] c0      1 init: Service qti does not have a SELinux domain defined.
[  256.560617] c0      1 init: Starting service 'qti'...
[  256.565331] c0   2984 init: cannot execve('/vendor/bin/qti'): Permission denied
[  256.568105] c0      1 init: Service 'qti' (pid 2984) exited with status 127
[  256.568215] c0      1 init: Service 'qti' (pid 2984) killing any children in process group
[  256.569759] c0    417 type=1400 audit(1485692770.049:127): avc: denied { execute_no_trans } for pid=2984 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  261.236811] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[  261.236859] c0      0 ->handle_irq():  ffffffc00032daec, msm_gpio_irq_handler+0x0/0x148
[  261.236919] c0      0 ->irq_data.chip(): ffffffc0015905a8, gic_chip+0x0/0xe8
[  261.236962] c0      0 ->action():           (null)
[  261.236981] c0      0    IRQ_NOPROBE set
[  261.236997] c0      0  IRQ_NOREQUEST set
[  261.237012] c0      0   IRQ_NOTHREAD set
[  261.575684] c0      1 init: Service qti does not have a SELinux domain defined.
[  261.575788] c0      1 init: Starting service 'qti'...
[  261.581289] c0   2985 init: cannot execve('/vendor/bin/qti'): Permission denied
[  261.581650] c1    417 type=1400 audit(1485692775.066:128): avc: denied { execute_no_trans } for pid=2985 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  261.584048] c0      1 init: Service 'qti' (pid 2985) exited with status 127
[  261.584148] c0      1 init: Service 'qti' (pid 2985) killing any children in process group
[  262.860477] c0    785 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  262.860747] c0    785 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  262.864704] c0    785 msm_pcie_enable: PCIe RC0 PHY is ready!
[  262.874937] c0    785 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  262.901854] c0    785 msm_pcie_enable: PCIe RC0 link initialized
[  262.916805] c0    785 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  262.920696] c0      0 wlan: [0:E :WDA] SA: 80:2a:a8:5c:37:8c DA: ac:37:43:4a:2c:60
[  262.920720] c0      0 wlan: [0:E :WDA] Ether Type: 0x0800
[  262.920732] c0      0 wlan: [0:E :WDA] IPV4_proto_type: 6
[  262.920743] c0      0 wlan: [0:E :WDA] WOW IPV4 TCP Packet rcvd
[  262.920755] c0      0 wlan: [0:E :WDA] len: 211 sport: 5228 dport: 45456
[  262.921114] c0      3 htt_rx_offload_paddr_msdu_pop_ll: First packet after WOW Wakeup rcvd
[  262.921776] c0    785 cnss: runtime resume status: 0
[  263.027513] c2    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
[  263.222425] c0    470 [BATT] fb_notifier_callback-> display is On
[  263.222426] c3    259 [BATT] batt_worker: total_time since last batt update = 50900 ms.
[  263.225548] c3    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  263.225568] c3    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  263.225596] c3    259 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 263225612573 (2017-01-29 12:26:16.713182719 UTC)
[  263.225612] c3    259 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 263225627469 (2017-01-29 12:26:16.713202719 UTC)
[  263.228509] c3    259 [BATT][SMBCHG] 0x1010=50,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3505207uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  263.228698] c3    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8f,07,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  263.228713] c3    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  263.232398] c3    259 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=322,current=-133818uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4945mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=310,usb_overheat=0,level_accu=0 at 263232427210 (2017-01-29 12:26:16.719956418 UTC)
[  266.015172] c2    519 tfa98xx_spk_event(): event 2
[  266.026703] c1    261 [BATT] chg_full_check_worker: vol:4400, curr=-133, is_eoc_count=0, is_full=1, is_eoc=0 at 266026729571 (2017-01-29 12:26:19.514289040 UTC)
[  266.405238] c2     17 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[  266.406978] c2     17 get_ice_device_from_storage_type: found ice device ffffffc0f793aa00
[  266.793809] c0      1 init: Service qti does not have a SELinux domain defined.
[  266.793832] c0      1 init: Starting service 'qti'...
[  266.794558] c3   3165 init: cannot execve('/vendor/bin/qti'): Permission denied
[  266.795211] c3      1 init: Service 'qti' (pid 3165) exited with status 127
[  266.795229] c3      1 init: Service 'qti' (pid 3165) killing any children in process group
[  266.799160] c0    417 type=1400 audit(1485692780.279:129): avc: denied { execute_no_trans } for pid=3165 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  267.279398] c2   3263 [NFC] pn551_dev_open : major=10, minor=99
[  267.279417] c2   3263 [NFC] pn551_dev_ioctl power off (delay50)
[  267.279437] c2   3263 [NFC] pn551_Disable: gpio=12 set_value=0
[  267.279449] c2   3263 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
[  267.330173] c2   3263 [NFC] pn551_dev_ioctl pn551_Disable, set is_debug = 0, s_wdcmd_cnt = 0
[  267.340275] c2   3263 [NFC] pn551_dev_ioctl power on (delay50)
[  267.340298] c2   3263 [NFC] pn551_Enable: gpio=12 set_value=1
[  267.340308] c2   3263 [NFC] pn551_Enable: [NFC] gpio=12 check ven_gpio value=1
[  267.393349] c2   3263 [NFC] pn551_dev_ioctl pn551_Enable, set is_debug = 1, s_wdcmd_cnt : 0
[  267.398349] c2   3287 [NFC] pn551_dev_read: start count = 3
[  267.398364] c2   3287 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[  267.398377] c2   3287 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[  267.398431] c2   3288 [NFC] pn551_dev_write: start count = 4
[  267.398438] c2   3288 [NFC] pn551_dev_write: writing 4 bytes
[  267.398445] c2   3288 [NFC] pn551_dev_write : [0] = 0x20
[  267.398448] c2   3288 [NFC] pn551_dev_write : [1] = 0x0
[  267.398451] c2   3288 [NFC] pn551_dev_write : [2] = 0x1
[  267.398454] c2   3288 [NFC] pn551_dev_write : [3] = 0x0
[  267.398458] c2   3288 [NFC] pn551_TxData: [addr=28 flag=0 len=4]
[  267.398461] c2   3288 [NFC] pn551_TxData: retry 0 ........
[  267.398906] c2   3288 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x27 (ok)
[  267.408884] c2   3288 [NFC] pn551_dev_write done count = 4
[  267.411154] c0   3286 [NFC] pn551_dev_irq_handler: irq=405
[  267.411163] c2   3287 [NFC] pn551_dev_read : wait_event_interruptible done
[  267.411170] c2   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[  267.411174] c2   3287 [NFC] pn551_RxData: retry 0 ........
[  267.411380] c2   3287 [NFC] pn551_dev_read : [0] = 0x40
[  267.411387] c2   3287 [NFC] pn551_dev_read : [1] = 0x0
[  267.411390] c2   3287 [NFC] pn551_dev_read : [2] = 0x3
[  267.411394] c2   3287 [NFC] pn551_dev_read done count = 3
[  267.411404] c2   3287 [NFC] pn551_dev_read: start count = 3
[  267.411411] c2   3287 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 1
[  267.411416] c2   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[  267.411419] c2   3287 [NFC] pn551_RxData: retry 0 ........
[  267.411611] c2   3287 [NFC] pn551_dev_read : [0] = 0x0
[  267.411616] c2   3287 [NFC] pn551_dev_read : [1] = 0x11
[  267.411619] c2   3287 [NFC] pn551_dev_read : [2] = 0x0
[  267.411627] c2   3287 [NFC] pn551_dev_read done count = 3
[  267.411747] c2   3288 [NFC] pn551_dev_write: start count = 3
[  267.411752] c2   3288 [NFC] pn551_dev_write: writing 3 bytes
[  267.411760] c2   3288 [NFC] pn551_dev_write : [0] = 0x20
[  267.411763] c2   3288 [NFC] pn551_dev_write : [1] = 0x1
[  267.411766] c2   3288 [NFC] pn551_dev_write : [2] = 0x0
[  267.411770] c2   3288 [NFC] pn551_TxData: [addr=28 flag=0 len=3]
[  267.411773] c2   3288 [NFC] pn551_TxData: retry 0 ........
[  267.411845] c2   3287 [NFC] pn551_dev_read: start count = 3
[  267.411862] c2   3287 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[  267.411872] c2   3287 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[  267.412487] c2   3288 [NFC] pn551_dev_write done count = 3
[  267.412589] c2   3287 [NFC] pn551_dev_read : wait_event_interruptible done
[  267.412595] c2   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[  267.412598] c2   3287 [NFC] pn551_RxData: retry 0 ........
[  267.412798] c2   3287 [NFC] pn551_dev_read : [0] = 0x40
[  267.412804] c2   3287 [NFC] pn551_dev_read : [1] = 0x1
[  267.412807] c2   3287 [NFC] pn551_dev_read : [2] = 0x19
[  267.412810] c2   3287 [NFC] pn551_dev_read done count = 3
[  267.412824] c2   3287 [NFC] pn551_dev_read: start count = 25
[  267.412833] c2   3287 [NFC] pn551_dev_read: reading 25 bytes, irq_gpio = 1
[  267.412838] c2   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=19]
[  267.412840] c2   3287 [NFC] pn551_RxData: retry 0 ........
[  267.413727] c0   3287 [NFC] pn551_dev_read : [0] = 0x0
[  267.413736] c0   3287 [NFC] pn551_dev_read : [1] = 0x3
[  267.413741] c0   3287 [NFC] pn551_dev_read : [2] = 0x1e
[  267.413746] c0   3287 [NFC] pn551_dev_read : [3] = 0x3
[  267.413750] c0   3287 [NFC] pn551_dev_read : [4] = 0x0
[  267.413754] c0   3287 [NFC] pn551_dev_read : [5] = 0x8
[  267.413757] c0   3287 [NFC] pn551_dev_read : [6] = 0x0
[  267.413761] c0   3287 [NFC] pn551_dev_read : [7] = 0x1
[  267.413765] c0   3287 [NFC] pn551_dev_read : [8] = 0x2
[  267.413777] c0   3287 [NFC] pn551_dev_read : [9] = 0x3
[  267.413780] c0   3287 [NFC] pn551_dev_read : [10] = 0x80
[  267.413784] c0   3287 [NFC] pn551_dev_read : [11] = 0x81
[  267.413788] c0   3287 [NFC] pn551_dev_read : [12] = 0x82
[  267.413791] c0   3287 [NFC] pn551_dev_read : [13] = 0x83
[  267.413795] c0   3287 [NFC] pn551_dev_read : [14] = 0x2
[  267.413799] c0   3287 [NFC] pn551_dev_read : [15] = 0xd0
[  267.413802] c0   3287 [NFC] pn551_dev_read : [16] = 0x2
[  267.413806] c0   3287 [NFC] pn551_dev_read : [17] = 0xff
[  267.413809] c0   3287 [NFC] pn551_dev_read : [18] = 0x2
[  267.413813] c0   3287 [NFC] pn551_dev_read : [19] = 0x0
[  267.413817] c0   3287 [NFC] pn551_dev_read : [20] = 0x4
[  267.413820] c0   3287 [NFC] pn551_dev_read : [21] = 0x98
[  267.413824] c0   3287 [NFC] pn551_dev_read : [22] = 0x10
[  267.413827] c0   3287 [NFC] pn551_dev_read : [23] = 0x5
[  267.413831] c0   3287 [NFC] pn551_dev_read : [24] = 0x2
[  267.413836] c0   3287 [NFC] pn551_dev_read done count = 25
[  267.413984] c2   3288 [NFC] pn551_dev_write: start count = 6
[  267.413992] c2   3288 [NFC] pn551_dev_write: writing 6 bytes
[  267.413999] c2   3288 [NFC] pn551_dev_write : [0] = 0x20
[  267.414002] c2   3288 [NFC] pn551_dev_write : [1] = 0x3
[  267.414005] c2   3288 [NFC] pn551_dev_write : [2] = 0x3
[  267.414008] c2   3288 [NFC] pn551_dev_write : [3] = 0x1
[  267.414011] c2   3288 [NFC] pn551_dev_write : [4] = 0xa0
[  267.414014] c2   3288 [NFC] pn551_dev_write : [5] = 0x5
[  267.414017] c2   3288 [NFC] pn551_TxData: [addr=28 flag=0 len=6]
[  267.414020] c2   3288 [NFC] pn551_TxData: retry 0 ........
[  267.415117] c0   3287 [NFC] pn551_dev_read: start count = 3
[  267.415133] c0   3287 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 1
[  267.415140] c0   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[  267.415144] c0   3287 [NFC] pn551_RxData: retry 0 ........
[  267.416192] c2   3288 [NFC] pn551_dev_write done count = 6
[  267.416856] c0   3287 [NFC] pn551_dev_read : [0] = 0x40
[  267.416864] c0   3287 [NFC] pn551_dev_read : [1] = 0x3
[  267.416868] c0   3287 [NFC] pn551_dev_read : [2] = 0x6
[  267.416872] c0   3287 [NFC] pn551_dev_read done count = 3
[  267.416885] c0   3287 [NFC] pn551_dev_read: start count = 6
[  267.416893] c0   3287 [NFC] pn551_dev_read: reading 6 bytes, irq_gpio = 1
[  267.416900] c0   3287 [NFC] pn551_RxData: [addr=28 flag=1 len=6]
[  267.417116] c0   3287 [NFC] pn551_RxData: retry 0 ........
[  267.423554] c0   3287 [NFC] pn551_dev_read : [0] = 0x0
[  267.423563] c0   3287 [NFC] pn551_dev_read : [1] = 0x1
[  267.423568] c0   3287 [NFC] pn551_dev_read : [2] = 0xa0
[  267.423573] c0   3287 [NFC] pn551_dev_read : [3] = 0x5
[  267.423578] c0   3287 [NFC] pn551_dev_read : [4] = 0x1
[  267.423583] c0   3287 [NFC] pn551_dev_read : [5] = 0x0
[  267.423588] c0   3287 [NFC] pn551_dev_read done count = 6
[  267.424254] c2   3287 [NFC] pn551_dev_read: start count = 3
[  267.424267] c2   3287 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[  267.424280] c2   3287 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[  267.425189] c2   3288 [NFC] pn551_dev_write: start count = 4
[  267.697762] c0    417 type=1400 audit(1485692781.159:130): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.749300] c2    417 type=1400 audit(1485692781.159:131): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.749397] c2    417 type=1400 audit(1485692781.159:132): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.749452] c2    417 type=1400 audit(1485692781.166:133): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.791896] c2    417 type=1400 audit(1485692781.166:134): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.794700] c0    266 wlan: [266:E :WDA]  scan complete - scan_id a003, vdev_id 0
[  267.795600] c0   1959 wlan: [1959:E :SME] Found 6 BSS, statusCode 0
[  267.880971] c2    417 type=1400 audit(1485692781.166:135): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881048] c2    417 type=1400 audit(1485692781.176:136): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881153] c2    417 type=1400 audit(1485692781.176:137): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881201] c2    417 type=1400 audit(1485692781.176:138): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881248] c2    417 type=1400 audit(1485692781.306:139): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881294] c2    417 type=1400 audit(1485692781.306:140): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  267.881339] c2    417 type=1400 audit(1485692781.306:141): avc: denied { search } for pid=3005 comm="Binder:471_2" name="firmware" dev="dm-0" ino=24 scontext=u:r:audioserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[  268.550685] c1   3427 ------------[ cut here ]------------
[  268.550708] c1   3427 WARNING: CPU: 1 PID: 3427 at ../../../../../../../../home/dp/lineage/14.1/kernel/google/marlin/net/core/dev.c:3426 netif_rx_internal+0x110/0x214()
[  268.550715] c1   3427 Cloned packet from dev wlan0
[  268.550725] c1   3427 CPU: 1 PID: 3427 Comm: mdns-socket Tainted: G        W      3.18.31-Lineage-g97d0221-00003-gf925b57 #1
[  268.550731] c1   3427 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
[  268.550737] c1   3427 Call trace:
[  268.550748] c1   3427 [<ffffffc00008aab4>] dump_backtrace+0x0/0x23c
[  268.550755] c1   3427 [<ffffffc00008ad04>] show_stack+0x14/0x1c
[  268.550764] c1   3427 [<ffffffc000e3d2bc>] dump_stack+0x80/0xa4
[  268.550771] c1   3427 [<ffffffc0000a41d4>] warn_slowpath_common+0x88/0xb0
[  268.550777] c1   3427 [<ffffffc0000a4288>] warn_slowpath_fmt+0x60/0x80
[  268.550784] c1   3427 [<ffffffc000c70c44>] netif_rx_internal+0x110/0x214
[  268.550790] c1   3427 [<ffffffc000c76218>] netif_rx_ni+0x8c/0x110
[  268.550796] c1   3427 [<ffffffc000c76358>] dev_loopback_xmit+0xbc/0xcc
[  268.550803] c1   3427 [<ffffffc000ce3334>] ip_mc_output+0x11c/0x23c
[  268.550809] c1   3427 [<ffffffc000ce1af0>] ip_local_out_sk+0x3c/0x48
[  268.550815] c1   3427 [<ffffffc000ce4068>] ip_send_skb+0x18/0x98
[  268.550823] c1   3427 [<ffffffc000d07074>] udp_send_skb+0x190/0x29c
[  268.550829] c1   3427 [<ffffffc000d07698>] udp_sendmsg+0x4c8/0x6e4
[  268.550837] c1   3427 [<ffffffc000d637b8>] udpv6_sendmsg+0x170/0x8ec
[  268.550844] c1   3427 [<ffffffc000d11070>] inet_sendmsg+0x8c/0xc0
[  268.550852] c1   3427 [<ffffffc000c5d9f0>] sock_sendmsg+0x9c/0xd0
[  268.550858] c1   3427 [<ffffffc000c5eed4>] SyS_sendto+0x174/0x1bc
[  268.550906] c1   3427 ---[ end trace 6143182642ef75a1 ]---
[  269.489164] c1    470 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 4
[  269.551276] c0   1465 i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:6) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
[  269.563854] c0   1834 [NFC] pn551_dev_irq_handler: irq=405
[  269.693209] c1    470 [BATT] fb_notifier_callback-> display is Off
[  269.693209] c0    259 [BATT] batt_worker: total_time since last batt update = 6470 ms.
[  269.696728] c0    259 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2017-01-29 12:22:52, g_overheat_55_sec = 0, g_total_level_raw = 0
[  269.696741] c0    259 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[  269.696759] c0    259 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 269696775301 (2017-01-29 12:26:23.184348468 UTC)
[  269.696772] c0    259 [BATT] ibat_total=1600000[1600000,0],ibat_total_new=1600000,is_parallel=0 at 269696786760 (2017-01-29 12:26:23.184363364 UTC)
[  269.703155] c2    259 [BATT][SMBCHG] 0x1010=10,0x1210=10,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3505207uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=16mA
[  269.703346] c2    259 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8f,85,00],CHG_CFG[F0:F4]=[0f,04,0f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1e,04,d8,41]
[  269.703358] c2    259 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,91,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,92,00,00],MISC_CFG[FA:FF]=[00,03,c0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[  269.706531] c1    259 [BATT] ID=3,level=100,level_raw=100,vol=4400mV,temp=320,current=-133818uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4931mV,max_iusb=900mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=315,usb_overheat=0,level_accu=0 at 269706552542 (2017-01-29 12:26:23.194094406 UTC)
[  270.257039] c1      1 init: avc:  granted  { set } for property=net.lte.ims.volte.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  270.257548] c1      1 init: avc:  granted  { set } for property=net.lte.ims.wfc.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  270.258225] c1      1 init: avc:  granted  { set } for property=net.lte.ims.vt.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  270.270634] c2      1 init: avc:  granted  { set } for property=net.lte.ims.volte.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  270.291474] c1      1 init: avc:  granted  { set } for property=net.lte.ims.wfc.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  270.347377] c2      1 init: avc:  granted  { set } for property=net.lte.ims.vt.provisioned pid=2152 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[  271.349012] c3      1 init: Service qti does not have a SELinux domain defined.
[  271.349035] c3      1 init: Starting service 'qti'...
[  271.349865] c1   3699 init: cannot execve('/vendor/bin/qti'): Permission denied
[  271.350334] c1    417 type=1400 audit(1485692784.833:142): avc: denied { execute_no_trans } for pid=3699 comm="init" path="/vendor/bin/qti" dev="sda31" ino=41 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
[  271.350622] c3      1 init: Service 'qti' (pid 3699) exited with status 127
[  271.350643] c3      1 init: Service 'qti' (pid 3699) killing any children in process group
[  271.586539] c0   3409 mtp_open
[  272.368084] c2    519 tfa98xx_spk_event(): event 4
[  273.292085] c0    502 wlan: [502:E :WDA]  scan complete - scan_id a004, vdev_id 0
[  273.292315] c0   1959 wlan: [1959:E :SME] Found 4 BSS, statusCode 0
[  273.973739] c1    358 FG: fg_is_batt_id_valid: fg batt sts 0x8
[  274.457637] c0    266 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[  274.459176] c0    266 cnss: runtime suspend status: 0
[  275.093379] c3     83 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[  275.093528] c3     83 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[  275.097030] c3     83 msm_pcie_enable: PCIe RC0 PHY is ready!
[  275.107264] c3     83 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[  275.134018] c3     83 msm_pcie_enable: PCIe RC0 link initialized
[  275.150090] c3     83 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  275.155684] c3     83 cnss: runtime resume status: 0
[  275.845480] c3   4130 HTB: quantum of class 10001 is big. Consider r2q change.
[  275.854789] c3   4132 HTB: quantum of class 10010 is big. Consider r2q change.