Skip to content

Instantly share code, notes, and snippets.

@invisiblek

invisiblek/android.log Secret

Created August 25, 2023 14:34
Show Gist options
  • Save invisiblek/8df6b22056ab14fdcd9a772932fd3499 to your computer and use it in GitHub Desktop.
Save invisiblek/8df6b22056ab14fdcd9a772932fd3499 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
android.log
bl31 reboot reason: 0xd
bl31 reboot reason: 0x1
tlSC2:BL:635f8f;ID:0096401548B22D0D;FEAT:30F:1FFE0000:B002F:1;POC:FF;RCY:0;OVD:0;DFU:0;eMMC:0;RD-0:0;CHK:0;RVK-N:8000;RVK-C:8000;RVK-A:800;RVK-C:8800;RVK-A:800;RVK-C:8800;RVK-N:8000;RVK-C:8800;SCS:0;RVK-N:00004000;RVK-C:0000c800;RVK-N:00002000;RVK-C:0000e800;
build in ddr magic:ddr4
OTP_LIC00 : 0f0300000000fe1f2f000b0000000000
OTP_LIC10 : 00820700aa01fe00ff00001f00400300
OTP_LIC20 : ffffffbf00000000c280000000000001
OTP_LIC30 : 000000f201000000ff0200f207000000
TE: 177957
BL2 Built : 20:42:11, Aug 9 2021. sc2 griscure-review-sc2-bl2-08032020-120-g922477b - jenkins@walle02-sh
Board ID = 1
Set sys clock to 24Mhz
gp1pll is 1200Mhz. Locked
syspll is 1512Mhz. Locked
Set sys clock to 167Mhz
hifipll is 1800Mhz. Locked
bl2_platform_setup
boot area list:
1STBLOB 00000200 00040000
BL2E 00040200 00013000
BL2X 00053200 00011000
DDRFIP 00064200 00040000
DEVFIP 000a4200 00300000
s_setup from rom:00010081
dma mode
DDR driver_vesion: LPDDR4_PHY_V_0_1_23 build time: Aug 9 2021 20:42:05
ddr clk to 672MHz
ddr fw flag:1
fw_type:1, cfg max:3, mask:0007
try next fw type:0
fw_type:0, cfg max:3, mask:0007
DDR3 probe
ddr clk to 672MHz
Load: DDRFIP From: eMMC - 3.0 src: 00000000, dst: f700ab90, size: 00009600sdemmc src: ;
Check phy result
dram_init
read enable training
fine write leveling
read dq deskew
mpr read training
Write leveling coarse
1d write dqs
1d read dqs
read latency training
Training successfully!
1D training succeed
auto size-- 65535DDR cs0 size: 4096MB
DDR cs1 size: 0MB
DMC_DDR_CTRL: 00000055DDR size: 3856MB
cs0 DataBus test pass
cs0 AddrBus test pass
not refresh non-sec scramble key
sec scramble use random key
ddr scramble enabled
100bdlr_step_size ps== 420
load mask:01
Load: DDRFIP From: eMMC - 3.0 src: 0000a000, dst: f700ab90, size: 00009600sdemmc src: ;
Load: DDRFIP From: eMMC - 3.0 src: 00014000, dst: f700ab90, size: 00009600sdemmc src: ;
Load: DDRFIP From: eMMC - 3.0 src: 0001e000, dst: f700ab90, size: 00009600sdemmc src: ;
Load: DDRFIP From: eMMC - 3.0 src: 00028000, dst: f700ab90, size: 00009600sdemmc src: ;
Load: DDRFIP From: eMMC - 3.0 src: 00032000, dst: f700ab90, size: 00009600sdemmc src: ;
result report
boot times 26211
INFO: bl2_load_bl2ex start!
INFO: load ...
Load: BL2E From: eMMC - 3.0 src: 00002000, dst: 00fffff0, size: 00011000sdemmc src: ;
INFO: check ...
SHA CHK OK!
INFO: load ...
Load: BL2X From: eMMC - 3.0 src: 00000000, dst: 007ffff0, size: 00011000sdemmc src: ;
INFO: check ...
SHA CHK OK!
RVK-A:00000400;RVK-C:0000ec00;RVK-N:00004000;RVK-C:0000ec00;RVK-N:00002000;RVK-C:0000ec00;RVK-A:00000400;RVK-C:0000ec00;run into bl2e
info: get valid params from BL2 !
bl2_gd_init
BL2E: do things as vendor specific ...
Hello world, now in BL2E
TE: 405272
BL2E Built : 17:31:56, Jun 18 2021. sc2 g7445d1e - jenkins@walle02-sh
Start to do bl2e platform setup !
boot area list:
1STBLOB 00000200 00040000
BL2E 00040200 00013000
BL2X 00053200 00011000
DDRFIP 00064200 00040000
DEVFIP 000a4200 00300000
eMMC boot @ 0
sw-hs2 s
tun-w: s=3, sz=4
sw8 s
aml log : BL2E load BL3X.....
TE: 412425
Load FIP HDR from eMMC, src: 0x00000000, des: 0x00200000, size: 0x00008000, part: 0
Load BL3X from eMMC, src: 0x00008000, des: 0x00208000, size: 0x0026c260, part: 0
bl30 payload size: 0x00010260
bl30 memcpy
info: process payload 0 bl3x_toc: 0x00200020 bl3x_data: 0x00208000 rc=148
bl40 payload size: 0x00018470
info: process payload 1 bl3x_toc: 0x00200048 bl3x_data: 0x00219000 rc=188
bl31 payload size: 0x00040470
info: process payload 2 bl3x_toc: 0x00200070 bl3x_data: 0x00232000 rc=211
bl32 payload size: 0x00080470
info: process payload 3 bl3x_toc: 0x00200098 bl3x_data: 0x00273000 rc=245
bl33 memcpy
bl33 payload size: 0x00180260 offset: 0x000f4000
info: process payload 4 bl3x_toc: 0x002000c0 bl3x_data: 0x002f4000 rc=268
info: process payload 5 bl3x_toc: 0x002000e8 bl3x_data: 0x002001e0 rc=148
info: process payload 6 bl3x_toc: 0x00200110 bl3x_data: 0x00200fe0 rc=188
info: process payload 7 bl3x_toc: 0x00200138 bl3x_data: 0x00201de0 rc=211
info: process payload 8 bl3x_toc: 0x00200160 bl3x_data: 0x00202be0 rc=245
info: process payload 9 bl3x_toc: 0x00200188 bl3x_data: 0x002039e0 rc=268
info: process payload 10 bl3x_toc: 0x002001b0 bl3x_data: 0x002047e0 rc=314
aml log : BL2E loading BL3X is done...!
boot bl2x
params to bl2x, address=0x0100b130
Hello, we are in BL2X world !
TE: 495063
BL2X Built : 18:29:17, Jul 16 2021. sc2 griscure-review-sc2-bl2x-09132020-60-gfae54fd - jenkins@walle02-sh
bl2_platform_setup
INFO: get valid list_blobinfo, 0x0100b130
Info: get valid bl31 payload info, address= 0x00232000 size= 0x00040470
Info: bl31 image is now ready !
Info: get valid bl40 payload info, address= 0x00219000 size= 0x00018470
RVK-A:00000200;RVK-C:0000ee00;RVK-A:00000200;RVK-C:0000ee00;
FEAT_DISABLE_SECURE_ENCLAVE: 1
szmin_default_areas: 0
bl2e_2 entry: 0100009c
run into bl31
NOTICE: BL31: v1.3(release):2460ce3c5
NOTICE: BL31: Built : 15:46:58, Aug 10 2021
BL31:tsensor calibration: pll tsensor: 0xfa0080c7, ddr tsensor: 0xfa0080f7
[mhu]: mhu_init-v1
[mhu]: 0xfe007080, 0x12120210
[mhu]: 0xfe007084, 0x12121002
[mhu]: 0xfe00708c, 0xa0a0802
[mhu]: 0xfe007010, 0x2
[mhu]: 0xfe007018, 0x10
[mhu]: 0xfe007014, 0x8
[mhu]: 0xfe007020, 0x89
[mhu]: 0xfe007024, 0x440
[mhu]: 0xfe007028, 0x6
[mhu]: mhu_init-v1 done
NOTICE: BL31: SC2 normal boot!
NOTICE: BL31: BL33 decompress pass
E/TC:0 00 INFO: BL3-2: ATOS-V3.8.0-9d11cda43 (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 Mon Aug 9 06:58:30 UTC 2021 arm
E/TC:0 00 INFO: BL3-2: secure time TEE
E/TC:0 00 INFO: BL3-2: Chip: SC2 Rev: C (32:C - 0:1)
Hello world again, bl2e meet you guys!
valid entry info for bl33, pc = 0x00000000
======== smc start aocpu ========
Starting AOCPU FreeRTOS...
AOCPU image version=' 22:56:04 2022-03-05'
AOCPU_IRQ_SEL=0x0
AOCPU_IRQ_SEL=0x0
AOCPU_IRQ_SEL=0x0
AOCPU_IRQ_SEL=0x0
[AOCPU]: mailbox init start
reg idx=0 cmd=6 handler=f702e572
reg idx=1 cmd=7 handler=f702e55c
[AOCPU]: mailbox init end
Starting timer ...
reg idx=2 cmd=b4 handler=f702c0b8
reg idx=3 cmd=b5 handler=f702c054
reg idx=4 cmd=b6 handler=f702bbae
reg idx=5 cmd=bb handler=f702bb6e
reg idx=6 cmd=bc handler=f702bb8e
reg idx=7 cmd=11 handler=f702adb6
reg idx=8 cmd=12 handler=f702adf2
reg idx=9 cmd=4 handler=f702a01c
reg idx=10 cmd=30 handler=f702a008
reg idx=11 cmd=31 handler=f702a018
Starting task scheduler ...
boot bl33 !
env_init: Environment STORAGE init done (ret=-2)
U-Boot 2019.01 (Mar 05 2022 - 22:55:57 +0800)
DRAM: 3.8 GiB
Relocation Offset is: f066b000
Relocating to f066b000, new gd at ea65adc8, sp at ea65adb0
board init
watchdog disable
gpio: pin GPIOH_8 (gpio 49) value is 0
ERR: hdmitx: not find /amhdmitx node:[meson_mmc_probe]sd: Controller probe success!
[meson_mmc_probe]emmc: Controller probe success!
emmc: resp timeout, cmd8, status=0x1ff2800
emmc: resp timeout, cmd55, status=0x1ff2800
store flag: 0, types: 1
emmc init success!
boot_device:1
boot_seq:0
boot_bakups:3
rebuid_id :0
boot area list:
bl2 200 40000
bl2e 40200 13000
bl2x 53200 11000
ddrfip 64200 40000
devfip a4200 300000
emmc: tuning start:
emmc: best_win_start =3, best_win_size =4
GUID Partition Table Header signature is wrong: 0xED31668D204C4D40 != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
fill_ept_by_gpt: invalid gpt ***
GUID Partition Table Header signature is wrong: 0x7D0053006A004800 != 0x5452415020494645
Amlogic Multi-DTB tool
Single DTB detected
get_partition_from_dts() 232: ret 0
Amlogic Multi-DTB tool
Single DTB detected
parts: 25
00: frp 0000000000200000 1
01: factory 0000000000800000 11
02:vendor_boot_a 0000000001800000 1
enable vendor_boot
03:vendor_boot_b 0000000001800000 1
enable vendor_boot
04: tee 0000000002000000 1
05: logo 0000000000800000 1
06: misc 0000000000200000 1
07: dtbo_a 0000000000200000 1
08: dtbo_b 0000000000200000 1
09: cri_data 0000000000800000 2
10: param 0000000001000000 2
11: odm_ext_a 0000000001000000 1
12: odm_ext_b 0000000001000000 1
13: oem_a 0000000002000000 1
14: oem_b 0000000002000000 1
15: boot_a 0000000004000000 1
set has_boot_slot = 1
16: boot_b 0000000004000000 1
17: rsv 0000000001000000 1
18: metadata 0000000001000000 1
19: vbmeta_a 0000000000200000 1
20: vbmeta_b 0000000000200000 1
21:vbmeta_system_a 0000000000200000 1
22:vbmeta_system_b 0000000000200000 1
23: super 0000000090000000 1
enable dynamic_partition
24: userdata ffffffffffffffff 4
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
emmc probe success
Loading Environment from STORAGE... OK
In: serial@a000
Out: serial@a000
Err: serial@a000
board late init
upgrade_step 2
Start read misc partition datas!
active slot = 0
set vendor_boot_mode true
ab mode, read dtb from kernel
[imgread]partname = vendor_boot_a
Amlogic Multi-DTB tool
Single DTB detected
vpu: find AML_VPU_CLK_LEVEL_DFT: 7
vpu: clk_level in dts: 7
vpu: vpu_power_on_new
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: vpu_module_init_config
vpu: vpu_probe
vpp: vpp_init, chip_id=50
vpp: g12a/b osd1 matrix rgb2yuv ..............
vpp: g12a/b osd2 matrix rgb2yuv..............
vpp: g12a/b osd3 matrix rgb2yuv..............
vpp: vpp osd2 matrix rgb2yuv..............
hdr_func: 4, hdr_process_select 0x1
hdr_func: 5, hdr_process_select 0x1
hdr_func: 64, hdr_process_select 0x1
hdr_func: 1, hdr_process_select 0x1
hdr_func: 2, hdr_process_select 0x1
cvbs: cpuid:0x32
vdac_gsw_init: no cali_cvbs data or chip not verify
cvbs: find performance_pal config
cvbs: find performance_ntsc config
Start read misc partition datas!
rebootstatus is reboot_init, skip check
amlsecurecheck - try bootloader/dtb/recovery secure check
Usage:
amlsecurecheck
Start read misc partition datas!
save boot-info
buff: 96401548b22d0d
Net: pwr up eth
in-phy
chip num 3
not set tx_amp_src
[KM]Msg:key_num: 20
[KM]Msg:normal key used!
the key partition size is:40000 byte
calc 0, store 0
cpy 1 is not valid
calc 0, store 0
cpy 0 is not valid
[KM]Msg:mark is not found
[EFUSE_MSG]keynum is 4
MACADDR:02:ad:32:01:87:e6(from sec_reg)
eth0: ethernet@ff3f0000
Start read misc partition datas!
active slot = 0
set vendor_boot_mode true
ab mode, read dtb from kernel
recovery_status=
upgrade_step=2
reboot_mode:::: normal
s_version: 01.01.220305.225557
[KM]Msg:key_num: 20
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L401:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[region_code] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[deviceid] not programed yet
Interface: MMC
Device 1: Vendor: Man 000015 Snr 06448efb Rev: 0.0 Prod: BJTD4R
Type: Removable Hard Disk
Capacity: 29820.0 MB = 29.1 GB (61071360 x 512)
Filesystem: FAT12 "KEYBOX PART"
hpd_state=0
do_hpd_detect: hdmimode=1080p60hz
do_hpd_detect: colorattribute=444,8bit
no sink, fallback to 720p60hz[4]
hdr mode is 0
dv mode is ver:0 len: 0
hdr10+ mode is 0
HDMI HPD low, no need parse EDID
dolby_status 0 1
dolby_vision_process: no tv and dv disabled
Saving Environment to STORAGE... OK
[OSD]load fb addr from dts:/fb
[OSD]status disabled
[OSD]load fb addr from dts:/drm-vpu
[OSD]set initrd_high: 0x7f800000
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/fb
[OSD]status disabled
[OSD]load fb addr from dts:/drm-vpu
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0x7f800000 width=3840, height=2160
dolby_status 0 1
bootLogoPart=odm_ext_a
ext4logoLoadCmd=ext4load mmc 1:${logoPart} ${logoLoadAddr} ${ext4LogoPath}
4147338 bytes read in 8 ms (494.4 MiB/s)
[imgread]load bmp from ext4 part okay
[OSD]osd_hw.free_dst_data: 0,719,0,575
[OSD]osd1_update_disp_freescale_enable
vpp: vpp_matrix_update: 2
cvbs_performance_enhancement
cvbs_config_hdmipll_sc2
cvbs_set_vid2_clk
vdac_enable: 1, module_sel:0x8
dolby_status 0 1
dolby_status 0 1
hdr_packet
vpp: hdr_policy = 1
vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
s_version: 01.01.220305.225557
[KM]Msg:key_num: 20
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L401:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[region_code] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[mac] not programed yet
[KM]Error:f[key_manage_query_size]L401:key[deviceid] not programed yet
Interface: MMC
Device 1: Vendor: Man 000015 Snr 06448efb Rev: 0.0 Prod: BJTD4R
Type: Removable Hard Disk
Capacity: 29820.0 MB = 29.1 GB (61071360 x 512)
Filesystem: FAT12 "KEYBOX PART"
gpio: pin GPIOD_3 (gpio 32) value is 1
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!
Hit any key to stop autoboot: 0
4096 bytes read in 1 ms (3.9 MiB/s)
system_mode in storeboot: 0
Start read misc partition datas!
active slot = 0
set vendor_boot_mode true
active_slot in storeboot: _a
[imgread]partname_r = vendor_boot_a
avb2: 1
Start read misc partition datas!
active slot = 0
set vendor_boot_mode true
active_slot is _a
ab_suffix is _a
AVB2 verify with default kpub size:520, vbmeta kpub size:520
Start read misc partition datas!
active slot = 0
set vendor_boot_mode true
avb verification: locked = 1, result = 0
avb2: 1
## Booting Android Image at 0x03080000 ...
Kernel command line: androidboot.dynamic_partitions=true androidboot.dtbo_idx=0 androidboot.boot_devices=soc/fe08c000.mmc use_uvm=1 buildvariant=user
load dtb from 0x1000000 ......
Amlogic Multi-DTB tool
Single DTB detected
env select addr: 0x0x1000000
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
active_slot is _a
Start read dtbo_a partition datas!
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
Uncompressing Kernel Image ... OK
Loading Ramdisk to 7ea6b000, end 7f7ffe27 ... OK
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
Loading Device Tree to 000000001ffeb000, end 000000001ffff875 ... OK
Starting kernel ...
uboot time: 3154368 us
boot 64bit kernel
[ 0.000000@0] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000@0] Linux version 5.4.125 (user@epyc) (Android (6443078 based on r383902) clang version 11.0.1 (https://android.googlesource.com/toolchain/llvm-project b397f81060ce6d701042b782172ed13bee898b79), LLD 11.0.1 (/buildbot/tmp/tmp6_m7QH b397f81060ce6d701042b782172ed13bee898b79)) #10 SMP PREEMPT Sat Mar 5 22:57:33 CST 2022
[ 0.000000@0] Machine model: Amlogic
[ 0.000000@0] earlycon: aml-uart0 at MMIO 0x00000000fe07a000 (options '')
[ 0.000000@0] printk: bootconsole [aml-uart0] enabled
[ 0.000000@0] 08400000 - 08500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] 05000000 - 08400000, 53248 KB, linux,secmon
[ 0.000000@0] 7f800000 - 80000000, 8192 KB, linux,meson-fb
[ 0.000000@0] eac00000 - f0800000, 94208 KB, linux,ion-dev
[ 0.000000@0] e8800000 - eac00000, 36864 KB, linux,ion-fb
[ 0.000000@0] invalid size property in 'linux,ppmgr' node.
[ 0.000000@0] cd800000 - e8800000, 442368 KB, linux,codec_mm_cma
[ 0.000000@0] cc400000 - cd800000, 20480 KB, linux,vdin0_cma
[ 0.000000@0] cb000000 - cc400000, 20480 KB, linux,vdin1_cma
[ 0.000000@0] 30000000 - 30800000, 8192 KB, linux,dsp_fw
[ 0.000000@0] cma: Reserved 8 MiB at 0x00000000ca800000
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: Trusted OS migration not required
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 32 pages/cpu s90456 r8192 d32424 u131072
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: detected: Virtualization Host Extensions
[ 0.000000@0] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.000000@0] alternatives: patching kernel code
[ 0.000000@0] Built 1 zonelists, mobility grouping on. Total pages: 969696
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 loglevel=7 otg_device=0 logo=osd0,loaded,0x00300000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bit
hdmimode=1080p60hz hdmichecksum=0x00000000 dolby_vision_on=0 hdr_policy=1 hdr_priority= frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.bootloader=01.01.220305.225557 androidboot.hardware=amlogic androidboot.serialno=ah21296401548b22d0d androidboot.wificountrycode=US androidboot.rpmb_state=0x1 androidboot.force_normal_boot=1 androidboot.slot_suffix=_a androidboot.vbmeta.device=/dev/block/vbmeta androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6912 androidboot.vbmeta.digest=e802ffe3b9ac562b3768d5a318b62b4919e2a75e9955f4677ce5b1ef2f201e28 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.verifiedbootstate=green androidboot.dynamic_partitions=true androidboot.dtbo_idx=0 androidboot.boot_devices=soc/fe08c000.mmc use_uvm=1 buildvariant=user
[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000@0] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000@0] Memory: 3139760K/3940352K available (13246K kernel code, 1442K rwdata, 3308K rodata, 1536K init, 811K bss, 108368K reserved, 692224K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffffc008000000 - 0xffffffc010000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffffc010000000 - 0xfffffffebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffffc010080000 - 0xffffffc010d70000 ( 13248 KB) 0x1080000
[ 0.000000@0] .rodata : 0xffffffc010d70000 - 0xffffffc0110d0000 ( 3456 KB) 0x1d70000
[ 0.000000@0] .init : 0xffffffc0110d0000 - 0xffffffc011250000 ( 1536 KB) 0x1d70000
[ 0.000000@0] .data : 0xffffffc011250000 - 0xffffffc0113b8808 ( 1443 KB) 0x2250000
[ 0.000000@0] .bss : 0xffffffc0113b8808 - 0xffffffc0114836d8 ( 812 KB) 0x23b8808
[ 0.000000@0] fixed : 0xfffffffefe5fb000 - 0xfffffffefea00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xfffffffefec00000 - 0xfffffffeffc00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xfffffffeffe00000 - 0xffffffffffe00000 ( 4 GB maximum)
[ 0.000000@0] 0xfffffffeffe00000 - 0xffffffff03a20000 ( 60 MB actual)
[ 0.000000@0] memory : 0xffffff8000000000 - 0xffffff80f0800000 ( 3848 MB) 0x0
[ 0.000000@0]
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] ftrace: allocating 36383 entries in 143 pages
[ 0.000000@0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000@0] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000@0] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] Tasks RCU enabled.
[ 0.000000@0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000@0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000@0] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
[ 0.000000@0] irq_meson_gpio: 87 to 12 gpio interrupt mux initialized
[ 0.000000@0] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000@0] random: get_random_bytes called from start_kernel+0x220/0x44c with crng_init=0
[ 0.000000@0] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001406@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002339@0] pid_max: default: 32768 minimum: 301
[ 0.003040@0] LSM: Security Framework initializing
[ 0.003574@0] SELinux: Initializing.
[ 0.004110@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.004980@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.007389@0] ASID allocator initialised with 32768 entries
[ 0.007499@0] rcu: Hierarchical SRCU implementation.
[ 0.026155@0] secmon: can't fine clear_range
[ 0.027233@0] smp: Bringing up secondary CPUs ...
[ 0.027875@0] Detected VIPT I-cache on CPU1
[ 0.027942@1] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.028690@1] Detected VIPT I-cache on CPU2
[ 0.028737@2] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.029346@2] Detected VIPT I-cache on CPU3
[ 0.029381@3] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.029453@3] smp: Brought up 1 node, 4 CPUs
[ 0.033444@0] SMP: Total of 4 processors activated.
[ 0.034048@0] CPU features: detected: Privileged Access Never
[ 0.034782@0] CPU features: detected: User Access Override
[ 0.035466@0] CPU features: detected: 32-bit EL0 Support
[ 0.036138@0] CPU features: detected: Common not Private translations
[ 0.036949@0] CPU features: detected: RAS Extension Support
[ 0.037655@0] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.038759@0] CPU features: detected: CRC32 instructions
[ 0.051124@0] CPU: All CPU(s) started at EL2
[ 0.052089@0] CPU3: update max cpu_capacity 1024
[ 0.053324@0] devtmpfs: initialized
[ 0.055970@0] CPU1: update max cpu_capacity 1024
[ 0.066654@1] Registered cp15_barrier emulation handler
[ 0.066683@0] Registered setend emulation handler
[ 0.067527@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.068507@0] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.069473@0] pinctrl core: initialized pinctrl subsystem
[ 0.070736@0] NET: Registered protocol family 16
[ 0.071867@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.071977@0] audit: initializing netlink subsys (disabled)
[ 0.072845@0] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.073702@3] cpuidle: using governor menu
[ 0.074597@1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.082763@1] printk: console [pstore-1] enabled
[ 0.083037@1] pstore: Registered ramoops as persistent store backend
[ 0.083516@1] scrambler_ramoops_init preserve startup key
[ 0.128206@1] cryptd: max_cpu_qlen set to 1000
[ 0.131947@2] SCSI subsystem initialized
[ 0.132107@3] usbcore: registered new interface driver usbfs
[ 0.132499@3] usbcore: registered new interface driver hub
[ 0.133184@3] usbcore: registered new device driver usb
[ 0.133878@3] videodev: Linux video capture interface: v2.00
[ 0.135099@3] secmon: reserve_mem_size:0x3300000
[ 0.135139@3] secmon secmon: assigned reserved memory node linux,secmon
[ 0.138524@3] secmon: get page:(____ptrval____), 5000
[ 0.138562@3] secmon: share in base: 0xffffff80050f9000, share out base: 0xffffff80050ff000
[ 0.139528@3] secmon: phy_in_base: 0x50f9000, phy_out_base: 0x50ff000
[ 0.140898@3] cpu_version: chip version = 32:C - 2:1
[ 0.141345@3] Advanced Linux Sound Architecture Driver Initialized.
[ 0.142300@3] Bluetooth: Core ver 2.22
[ 0.142333@3] NET: Registered protocol family 31
[ 0.142821@3] Bluetooth: HCI device and connection manager initialized
[ 0.143650@3] Bluetooth: HCI socket layer initialized
[ 0.144285@3] Bluetooth: L2CAP socket layer initialized
[ 0.144947@3] Bluetooth: SCO socket layer initialized
[ 0.146335@3] clocksource: Switched to clocksource arch_sys_counter
[ 0.218719@0] VFS: Disk quotas dquot_6.6.0
[ 0.218806@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.220285@0] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.220882@0] NET: Registered protocol family 2
[ 0.221786@0] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.223874@0] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.224355@0] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.225538@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.226651@0] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.227253@0] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.228004@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.229044@0] NET: Registered protocol family 1
[ 0.229874@0] NET: Registered protocol family 44
[ 0.231166@0] PCI: CLS 0 bytes, default 64
[ 0.231368@0] wifi: power_on_pin_OD = 0;
[ 0.231496@0] aml_wifi aml_wifi: [wifi_dev_probe] no power_on_pin2
[ 0.232272@0] aml_wifi aml_wifi: [wifi_dev_probe] no chip_en_pin
[ 0.233031@0] aml_wifi aml_wifi: [wifi_dev_probe] use double channel
[ 0.233928@0] aml_wifi aml_wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.234745@0] aml_wifi aml_wifi: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.235599@0] aml_wifi aml_wifi: [wifi_dev_probe] dhd_static_buf all setup
[ 0.236463@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem(): 100.10.545.3
[ 0.239719@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem ok
[ 0.239817@0] aml_wifi aml_wifi: [wifi_dev_probe] interrupt_pin=482
[ 0.240593@0] aml_wifi aml_wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[ 0.241516@0] aml_wifi aml_wifi: [wifi_dev_probe] power_on_pin=481
[ 0.242296@0] aml_wifi aml_wifi: [wifi_dev_probe] clock_32k_pin=0
[ 0.243311@0] aml_wifi aml_wifi: [wifi_setup_dt] wifi_setup_dt
[ 0.243889@0] aml_wifi aml_wifi: [wifi_setup_dt] irq num is:(67)
[ 0.244561@0] aml_wifi aml_wifi: [wifi_setup_dt] interrupt_pin(482)
[ 0.245361@0] aml_wifi aml_wifi: [wifi_setup_dt] power_on_pin(481)
[ 0.350737@0] Trying to unpack rootfs image as initramfs...
[ 0.732430@1] Freeing initrd memory: 13904K
[ 0.732528@1] Virtual kernel memory layout:
[ 0.732528@1] modules : 0xffffffc008000000 - 0xffffffc010000000 ( 128 MB)
[ 0.732528@1] vmalloc : 0xffffffc010000000 - 0xfffffffebfff0000 ( 250 GB)
[ 0.732528@1] .text : 0xffffffc010080000 - 0xffffffc010d70000 ( 13248 KB) 0x1080000
[ 0.732528@1] .rodata : 0xffffffc010d70000 - 0xffffffc0110d0000 ( 3456 KB) 0x1d70000
[ 0.732528@1] .init : 0xffffffc0110d0000 - 0xffffffc011250000 ( 1536 KB) 0x1d70000
[ 0.732528@1] .data : 0xffffffc011250000 - 0xffffffc0113b8808 ( 1443 KB) 0x2250000
[ 0.732528@1] .bss : 0xffffffc0113b8808 - 0xffffffc0114836d8 ( 812 KB) 0x23b8808
[ 0.732528@1] fixed : 0xfffffffefe5fb000 - 0xfffffffefea00000 ( 4116 KB)
[ 0.732528@1] PCI I/O : 0xfffffffefec00000 - 0xfffffffeffc00000 ( 16 MB)
[ 0.732528@1] vmemmap : 0xfffffffeffe00000 - 0xffffffffffe00000 ( 4 GB maximum)
[ 0.732528@1] 0xfffffffeffe00000 - 0xffffffff03a20000 ( 60 MB actual)
[ 0.732528@1] memory : 0xffffff8000000000 - 0xffffff80f0800000 ( 3848 MB) 0x0
[ 0.732528@1]
[ 0.745852@1] hw perfevents: no interrupt-affinity property for /arm_pmu, guessing.
[ 0.746356@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.751405@1] Initialise system trusted keyrings
[ 0.751537@1] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.759443@1] ntfs: driver 2.1.32 [Flags: R/W DEBUG].
[ 0.759752@1] fuse: init (API version 7.31)
[ 0.790498@1] NET: Registered protocol family 38
[ 0.790531@1] Key type asymmetric registered
[ 0.790932@1] Asymmetric key parser 'x509' registered
[ 0.791599@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.792525@1] io scheduler mq-deadline registered
[ 0.793120@1] io scheduler kyber registered
[ 0.795230@1] Amlogic Meson SC2 (S905X4/C2) Revision 32:c (2:1) Detected
[ 0.795939@1] vddcpu0: supplied by regulator-dummy
[ 0.796832@1] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.802638@0] brd: module loaded
[ 0.809979@1] loop: module loaded
[ 0.810354@1] zram: Added device: zram0
[ 0.811242@1] libphy: Fixed MDIO Bus: probed
[ 0.811263@1] tun: Universal TUN/TAP device driver, 1.6
[ 0.811889@1] PPP generic driver version 2.4.2
[ 0.812421@1] PPP BSD Compression module registered
[ 0.812931@1] PPP Deflate Compression module registered
[ 0.813613@1] PPP MPPE Compression module registered
[ 0.814220@1] NET: Registered protocol family 24
[ 0.814819@1] PPTP driver version 0.8.5
[ 0.815583@1] usbcore: registered new interface driver r8152
[ 0.816034@1] usbcore: registered new interface driver asix
[ 0.816760@1] usbcore: registered new interface driver ax88179_178a
[ 0.817528@1] usbcore: registered new interface driver cdc_ether
[ 0.819365@1] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb1v8 not found, using dummy regulator
[ 0.819858@1] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb3v3 not found, using dummy regulator
[ 0.820849@1] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb5v not found, using dummy regulator
[ 0.822217@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.822781@1] ehci-pci: EHCI PCI platform driver
[ 0.823767@1] usbcore: registered new interface driver usb-storage
[ 0.824676@1] mousedev: PS/2 mouse device common for all mice
[ 0.824886@1] usbcore: registered new interface driver xpad
[ 0.825574@1] usbcore: registered new interface driver usb_acecad
[ 0.826408@1] usbcore: registered new interface driver aiptek
[ 0.827065@1] usbcore: registered new interface driver gtco
[ 0.827770@1] usbcore: registered new interface driver hanwang
[ 0.828504@1] usbcore: registered new interface driver kbtab
[ 0.829320@1] i2c /dev entries driver
[ 0.829686@1] uvcvideo: Unable to create debugfs directory
[ 0.830424@1] usbcore: registered new interface driver uvcvideo
[ 0.831108@1] USB Video Class driver (1.1.1)
[ 0.831771@1] device-mapper: uevent: version 1.0.3
[ 0.832537@1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.833629@1] Bluetooth: HCI UART driver ver 2.3
[ 0.833926@1] Bluetooth: HCI UART protocol H4 registered
[ 0.862698@1] meson-gx-mmc fe08c000.mmc: host probe success!
[ 0.863804@1] meson-gx-mmc fe08a000.sd: Got CD GPIO
[ 0.864846@1] meson-gx-mmc fe08a000.sd: Missing clock clkin2
[ 0.892697@1] meson-gx-mmc fe08a000.sd: card OUT
[ 0.892749@2] meson-gx-mmc fe08a000.sd: host probe success!
[ 0.893805@2] meson-gx-mmc fe088000.sdio: Missing clock clkin2
[ 0.920703@2] meson-gx-mmc fe088000.sdio: host probe success!
[ 0.921690@2] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.924251@2] usbcore: registered new interface driver usbhid
[ 0.924287@2] usbhid: USB HID core driver
[ 0.926099@2] ashmem: initialized
[ 0.926162@2] exFAT: Version 1.3.0
[ 0.926920@2] unifykey: fail to obtain phy addr of shared mem
[ 0.926990@2] unifykey: normal key used!
[ 0.927549@2] unifykey: no unifykey-encrypt property
[ 0.928158@2] unifykey: unifykey num is 19
[ 0.928637@2] unifykey: unifykey_devno: f200000
[ 0.929923@2] unifykey: device unifykeys created ok
[ 0.930407@2] gxbb_pm: enter meson_pm_probe!
[ 0.930552@2] gxbb_pm: meson_pm_probe done
[ 0.931059@2] page_trace_module_init, create slab sysfs failed
[ 0.934471@2] meson_uart fe07a000.serial: ==uart0 reg addr = (____ptrval____)
[ 0.934718@0] fe07a000.serial: ttyS0 at MMIO 0xfe07a000 (irq = 24, base_baud = 1500000) is a meson_uart
[ 0.936614@0] printk: console [ttyS0] enabled
[ 0.936614@0] printk: console [ttyS0] enabled
[ 0.937116@0] printk: bootconsole [aml-uart0] disabled
[ 0.937116@0] printk: bootconsole [aml-uart0] disabled
[ 0.937310@0] Data 1 aligned delay is 0
[ 0.937310@0] Data 1 aligned delay is 0
[ 0.939307@1] mmc0: clk 199999997 div 5 tuning start
[ 0.941429@1] meson_uart fe080000.serial: ==uart1 reg addr = (____ptrval____)
[ 0.941717@0] fe080000.serial: ttyS1 at MMIO 0xfe080000 (irq = 43, base_baud = 1500000) is a meson_uart
[ 0.943644@0] amlogic rfkill init
[ 0.944040@0] not get gpio_en
[ 0.944080@0] not get btwakeup-gpios
[ 0.944283@0] sdio vendor is 0x0
[ 0.945979@0] mmc0: adj_win: < 0 1 3 4 >
[ 0.946002@1] mmc0: adj_win: < 0 1 3 4 >
[ 0.946282@1] step:4, delay1:0x4104104, delay2:0x4004104
[ 0.948641@1] random: fast init done
[ 0.951372@0] mmc0: adj_win: < 0 1 2 3 4 >
[ 0.951395@1] step:8, delay1:0x8208208, delay2:0x8008208
[ 0.955340@1] mmc0: adj_win: < 0 1 2 4 >
[ 0.955362@1] left:3, right:0, mid:4, size:4
[ 0.955686@1] step:0, delay1:0x0, delay2:0x0
[ 0.956229@1] mmc0: clk= 0x10000205, adj = 0x2000, dly1 = 0, dly2 = 0
[ 0.958357@1] aml_sd_emmc_clktest [514] clktest : 9710, delay_cell: 67, count: 37
[ 0.958610@1] [tl1_emmc_line_timing], delay1: 0xc30c30c, delay2: 0xc30c
[ 0.970660@1] first rfkill_register skip
[ 0.970884@0] request_irq error ret=-22
[ 0.971172@0] dev_pm_set_wake_irq failed: -22
[ 0.971965@0] input: input_btrcu as /devices/platform/aml_bt/input/input0
[ 0.975892@0] amlogic-new-usb2-v2 fe03a000.usb2phy: USB2 phy probe:phy_mem:0xfe03a000, iomap phy_base:0xffffffc011515000
[ 0.977458@0] amlogic-new-usb3-v2 fe03a080.usb3phy: USB3 phy probe:phy_mem:0xfe03a080, iomap phy_base:0xffffffc011525080
[ 0.979750@0] socdata fe010000.soc_info: socdata_devno:ee00000
[ 0.984001@0] flag_tgg: sysfs_demo_init: enter.
[ 0.985807@0] netem: version 1.3
[ 0.985840@0] u32 classifier
[ 0.985905@0] input device check on
[ 0.986409@0] Actions configured
[ 0.989198@0] xt_time: kernel timezone is -0000
[ 0.989538@0] gre: GRE over IPv4 demultiplexor driver
[ 0.989734@0] IPv4 over IPsec tunneling driver
[ 0.992398@0] Initializing XFRM netlink socket
[ 0.992533@0] IPsec XFRM device driver
[ 0.993975@0] NET: Registered protocol family 10
[ 0.995944@0] Segment Routing with IPv6
[ 0.996103@3] mip6: Mobile IPv6
[ 0.997259@3] NET: Registered protocol family 17
[ 0.997295@3] NET: Registered protocol family 15
[ 0.997752@3] l2tp_core: L2TP core driver, V2.0
[ 0.998314@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 0.999921@3] registered taskstats version 1
[ 0.999943@3] Loading compiled-in X.509 certificates
[ 1.000748@3] Key type ._fscrypt registered
[ 1.000929@3] Key type .fscrypt registered
[ 1.001447@3] Key type fscrypt-provisioning registered
[ 1.002481@3] pstore: Using crash dump compression: deflate
[ 1.005022@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb1v8 not found, using dummy regulator
[ 1.005506@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb3v3 not found, using dummy regulator
[ 1.006536@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb5v not found, using dummy regulator
[ 1.007803@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg
[ 1.008414@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg
[ 1.009971@3] scan time distance: 50528833 ns
[ 1.009992@1] best_start 0x1a, best_size 31
[ 1.012173@1] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg
[ 1.012325@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg
[ 1.013379@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.013900@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.015051@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000020020010010
[ 1.016113@3] xhci-hcd xhci-hcd.0.auto: irq 68, io mem 0xfde00000
[ 1.016976@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.017905@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018850@3] usb usb1: Product: xHCI Host Controller
[ 1.019474@3] usb usb1: Manufacturer: Linux 5.4.125 xhci-hcd
[ 1.020190@3] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 1.021372@3] hub 1-0:1.0: USB hub found
[ 1.021422@3] hub 1-0:1.0: 2 ports detected
[ 1.022172@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.022601@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.023568@3] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.024452@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.025531@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.026518@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.027437@3] usb usb2: Product: xHCI Host Controller
[ 1.028077@3] usb usb2: Manufacturer: Linux 5.4.125 xhci-hcd
[ 1.028791@3] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 1.029882@3] hub 2-0:1.0: USB hub found
[ 1.029948@3] hub 2-0:1.0: 1 port detected
[ 1.031431@3] failed to create debug_lockup
[ 1.032195@3] dwc_otg: usb0: type: 1 speed: 0,
[ 1.032197@3] config: 0, dma: 0, id: 1,
[ 1.032218@3] phy: fe03a000, ctrl: 0
[ 1.033030@3] dwc_otg_driver_probe host only, not probe usb_otg!!!
[ 1.033919@3] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.036114@3] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.036540@3] ALSA devi[ 1.039473@3] Freeing unused kernel memory: 1536K
[ 1.040054@3] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.040494@3] cfg80211: failed to load regulatory.db
[ 1.058396@3] Run /init as init process
[ 1.080322@0] ds_sht: 20, window:34, intf3:0x414008, clock:0x10100002
[ 1.080326@1] adjust:0x0
[ 1.080938@1] mmc0: new HS400 MMC card at address 0001
[ 1.081424@1] mmc0: clock 199999997, 8-bit-bus-width
[ 1.081424@1]
[ 1.082314@1] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 1.083513@1] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
[ 1.084255@1] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
[ 1.085149@1] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 16.0 MiB, chardev (246:0)
[ 1.088258@1] Enter aml_emmc_partition_ops
[ 1.088645@1] [mmc_read_partition_tbl] mmc read partition OK!
[ 1.088815@1] add_emmc_partition
[ 1.089687@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 1.090705@1] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 1.091739@1] [mmcblk0p03] cache offset 0x000006c00000, size 0x000000000000
[ 1.092780@1] [mmcblk0p04] env offset 0x000007400000, size 0x000000800000
[ 1.093831@1] [mmcblk0p05] frp offset 0x000008400000, size 0x000000200000
[ 1.094921@1] [mmcblk0p06] factory offset 0x000008e00000, size 0x000000800000
[ 1.095700@1] [mmcblk0p07] vendor_boot_a offset 0x000009e00000, size 0x000001800000
[ 1.096765@1] [mmcblk0p08] vendor_boot_b offset 0x00000be00000, size 0x000001800000
[ 1.098074@1] [mmcblk0p09] tee offset 0x00000de00000, size 0x000002000000
[ 1.099168@1] [mmcblk0p10] logo offset 0x000010600000, size 0x000000800000
[ 1.100203@1] [mmcblk0p11] misc offset 0x000011600000, size 0x000000200000
[ 1.101267@1] [mmcblk0p12] dtbo_a offset 0x000012000000, size 0x000000200000
[ 1.102345@1] [mmcblk0p13] dtbo_b offset 0x000012a00000, size 0x000000200000
[ 1.103389@1] [mmcblk0p14] cri_data offset 0x000013400000, size 0x000000800000
[ 1.104191@1] [mmcblk0p15] param offset 0x000014400000, size 0x000001000000
[ 1.105253@1] [mmcblk0p16] odm_ext_a offset 0x000015c00000, size 0x000001000000
[ 1.106592@1] [mmcblk0p17] odm_ext_b offset 0x000017400000, size 0x000001000000
[ 1.107388@1] [mmcblk0p18] oem_a offset 0x000018c00000, size 0x000002000000
[ 1.108697@1] [mmcblk0p19] oem_b offset 0x00001b400000, size 0x000002000000
[ 1.109501@1] [mmcblk0p20] boot_a offset 0x00001dc00000, size 0x000004000000
[ 1.110584@1] [mmcblk0p21] boot_b offset 0x000022400000, size 0x000004000000
[ 1.111887@1] [mmcblk0p22] rsv offset 0x000026c00000, size 0x000001000000
[ 1.112949@1] [mmcblk0p23] metadata offset 0x000028400000, size 0x000001000000
[ 1.113750@1] [mmcblk0p24] vbmeta_a offset 0x000029c00000, size 0x000000200000
[ 1.115082@1] [mmcblk0p25] vbmeta_b offset 0x00002a600000, size 0x000000200000
[ 1.116132@1] [mmcblk0p26] vbmeta_system_a offset 0x00002b000000, size 0x000000200000
[ 1.117178@1] [mmcblk0p27] vbmeta_system_b offset 0x00002ba00000, size 0x000000200000
[ 1.118004@1] [mmcblk0p28] super offset 0x00002c400000, size 0x000090000000
[ 1.119343@1] [mmcblk0p29] userdata offset 0x0000bcc00000, size 0x00068b000000
[ 1.120032@1] card key: card_blk_probe.
[ 1.120506@1] emmc_key_init:484 emmc key lba_start:0x12020,lba_end:0x12422
[ 1.122743@1] init: init first stage started!
[ 1.123293@2] calc 0, store 0
[ 1.123311@1] cpy 1 is not valid
[ 1.125075@1] calc 0, store 0
[ 1.125092@1] cpy 0 is not valid
[ 1.125196@1] emmc key: emmc_key_init:516 ok.
[ 1.125726@1] amlmmc_dtb_init: register dtb chardev
[ 1.127430@2] init: Loading module /lib/modules/aml_i2c.ko with args ""
[ 1.127509@2] calc 388c2947, store 388c2947
[ 1.129291@1] load module: aml_i2c
[ 1.129849@2] init: Loaded kernel module /lib/modules/aml_i2c.ko
[ 1.130252@2] init: Loading module /lib/modules/aml_mailbox.ko with args ""
[ 1.130909@2] calc 388c2947, store 388c2947
[ 1.131007@1] aml_mailbox: loading out-of-tree module taints kernel.
[ 1.131324@2] total valid 2
[ 1.133033@1] amlmmc_dtb_init: register dtb chardev OK
[ 1.133072@1] Exit aml_emmc_partition_ops OK.
[ 1.133468@1] load module: aml_mailbox
[ 1.134979@2] aml_mailbox: mhu fifo probe
[ 1.135034@2] meson_mhu_fifo fe006000.mhu: no get mbox wrrd -22
[ 1.135545@2] aml_mailbox: mbox-wr-rd 0
[ 1.136030@2] aml_mailbox: mbox-wr-rd 0
[ 1.136561@2] meson_mhu_fifo fe006000.mhu: no payload, only use fifo
[ 1.137346@2] meson_mhu_fifo fe006000.mhu: set mbox irqmax default value -22
[ 1.139100@2] aml_mailbox: mbox fifo probe done node:(____ptrval____), mhuf:0x2
[ 1.139963@2] aml_mailbox: mhu sec start
[ 1.140050@2] aml_mailbox: mbox sec init done
[ 1.141312@2] init: Loaded kernel module /lib/modules/aml_mailbox.ko
[ 1.141729@2] init: Loading module /lib/modules/aml_gki_tool.ko with args ""
[ 1.143193@2] load module: aml_gki_tool
[ 1.143275@2] /proc/cmdline= [init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 loglevel=7 otg_device=0 logo=osd0,loaded,0x00300000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bit
hdmimode=1080p60hz hdmichecksum=0x00000000 dolby_vision_on=0 hdr_policy=1 hdr_priority= frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.bootloader=01.01.220305.225557 androidboot.hardware=amlogic androidboot.serialno=ah21296401548b22d0d androidboot.wificountrycode=US androidboot.rpmb_state=0x1 androidboot.force_normal_boot=1 androidboot.slot_suffix=_a androidboot.vbmeta.device=/dev/block/vbmeta androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6912 androidboot.vbmeta.digest=e802ffe3b9ac562b3768d5a318b62b4919e2a75e9955f4677ce5b1ef2f201e28 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.verifiedbootstate=green androidboot.dynamic_partitions=true androidboot.dtbo_idx=0 androidboot.boot_devices=soc/fe08c000.mmc use_uvm=1 buildvariant=user
[ 1.143275@2] ]
[ 1.157633@2] init: Loaded kernel module /lib/modules/aml_gki_tool.ko
[ 1.158521@1] init: Loading module /lib/modules/aml_tee.ko with args ""
[ 1.159926@1] load module: aml_tee
[ 1.160029@1] init: Loaded kernel module /lib/modules/aml_tee.ko
[ 1.160654@1] init: Loading module /lib/modules/snd_soc_notify.ko with args ""
[ 1.161912@1] load module: snd_soc_notify
[ 1.163113@1] load module: meson_clk_measure
[ 1.166885@1] load module: aml_dvb_extern
[ 1.167314@1] aml_dvb_extern_init: OK, version: V1.07.
[ 1.255326@1] aml_media: no symbol version for aout_register_client
[ 1.312833@1] load module: aml_media
[ 1.312895@1] boot hdr_policy: 1
[ 1.313019@1] DI: di_read_canvas_reverse: bootargs is 0.
[ 1.313691@1] get_dolby_on: 0
[ 1.314070@1] hdmitx: get hdmi checksum: 0x00000000
[ 1.314736@1] vout: 576cvbs
[ 1.315041@1] vout: enable: 1
[ 1.315424@1] hdmitx boot frac_rate_policy: 1
[ 1.315440@1] hdmitx: hdmitx boot frac_rate_policy: 1
[ 1.315988@1] lcd: panel_type: lcd_1
[ 1.317075@1] aml_media: osd0
[ 1.317446@1] aml_media: loaded
[ 1.317847@1] aml_media: 0x00300000
[ 1.318300@1] vlock: phlock_phase_config: from bootargs is 0.
[ 1.319035@1] vdin_get_video_reverse: bootargs is 0.
[ 1.319649@1] vpp_axis_reverse: bootargs is 0
[ 1.320362@1] ### media_main_init() start
[ 1.320707@1] media_configs_system_init
[ 1.321208@1] call media_configs_system_init() ret=0
[ 1.322074@1] call secmem_init() ret=0
[ 1.322300@1] codec_mm_module_init
[ 1.323147@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 1.325738@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 1.325986@1] codec_mm_probe ok
[ 1.326663@1] call codec_mm_module_init() ret=0
[ 1.327443@1] Codec io: codec map io source 0xfe002000,size=8192 to 0xffffffc0116d2000
[ 1.327969@1] Codec io: codec map io source 0xfe320000,size=65536 to 0xffffffc011720000
[ 1.328969@1] Codec io: ignore io source start 0,size=0
[ 1.329630@1] Codec io: ignore io source start 0,size=0
[ 1.330296@1] Codec io: codec map io source 0xff000000,size=262144 to 0xffffffc011740000
[ 1.331326@1] Codec io: codec map io source 0xfe036000,size=8192 to 0xffffffc0116d6000
[ 1.332307@1] Codec io: ignore io source start 0,size=0
[ 1.332962@1] Codec io: codec_io_probe success, cpu_type=0x32
[ 1.333963@1] call codec_io_init() ret=0
[ 1.334190@1] call vdec_reg_ops_init() ret=0
[ 1.335085@1] vpu: vpu: driver version: v20201118(6-sc2)
[ 1.335417@1] vpu: vpu: load vpu_clk: 666666667Hz(7)
[ 1.336121@1] vpu: vpu: vpu_probe OK
[ 1.336694@1] call vpu_init() ret=0
[ 1.337061@1] vclk: aml_vclk_probe OK
[ 1.337482@1] call aml_vclk_init_module() ret=0
[ 1.338138@1] Canvas: canvas_probe ok, reg=fe036048, size=2000 base =ffffffc0116fc048
[ 1.339064@1] call amcanvas_init() ret=0
[ 1.339674@1] rdma: rdma_probe,cpu_type:4, ver:1, len:16,rdma_table_size:65536
[ 1.340365@1] vpu: vpu: vpu_vmod_mem_pd_get: unsupport vpu mod: 57
[ 1.341861@1] rdma: rdma_register, rdma_table_addr ffffffc011700000 phy: ca8a0000 reg_buf ffffff80c2540000
[ 1.342403@1] rdma: rdma_register success, handle 1 table_size 32768
[ 1.343182@1] rdma: set_rdma_handle video rdma handle = 1.
[ 1.343965@1] rdma: rdma_register, rdma_table_addr ffffffc011731000 phy: ca8a8000 reg_buf ffffff80c2770000
[ 1.345089@1] rdma: rdma_register success, handle 2 table_size 32768
[ 1.345890@1] rdma: set_rdma_handle video rdma handle = 2.
[ 1.346885@1] call amrdma_init() ret=0
[ 1.347279@1] call vout_venc_init() ret=0
[ 1.347705@1] call amhdmitx21_init() ret=0
[ 1.348426@1] hdmitx: system: Ver: 20201030
[ 1.348665@1] hdmitx: system: no hdmitx_i2c of pinctrl state
[ 1.349337@1] hdmitx: system: chip_type:15 chip_name:sc2
[ 1.350014@1] hdmitx: system: not find match pwr-ctl
[ 1.350653@1] hdmitx: drm_feature skip.
[ 1.350769@1] hdmitx: system: hpd irq = 51
[ 1.351651@1] hdmitx: system: viu1_vsync irq = 52
[ 1.352243@1] hdmitx: system: vapb_clk failed to probe
[ 1.352890@1] hdmitx: system: vpu_clk failed to probe
[ 1.353528@1] hdmitx: system: hdcp22_tx_skp failed to probe
[ 1.354233@1] hdmitx: system: hdcp22_tx_esm failed to probe
[ 1.354947@1] hdmitx: system: venci_top_gate failed to probe
[ 1.355653@1] hdmitx: system: venci_0_gate failed to probe
[ 1.356345@1] hdmitx: system: venci_0_gate failed to probe
[ 1.357039@1] hdmitx: get cts_hdmi_axi_clk err
[ 1.358043@1] vpu: vpu: vpu_dev_register: vpu_dev 37 in amhdmitx is already registered
[ 1.358867@1] hdmitx: error ddc cmd 0
[ 1.359071@1] hdmitx: hw: avmute set to 1
[ 1.359582@1] hdmitx: hdmitx_uboot_audio_en[626] data = 0x1f
[ 1.360288@1] hdmitx: system: fmt_attr 444,8bit
[ 1.361056@1] hdmitx: hdcp: hdmitx_hdcp_init
[ 1.361326@1] hdmitx: system: irq 4 0
[ 1.362045@0] hdmitx: system: plugout
[ 1.362060@0] hdmitx: system: amhdmitx_probe end
[ 1.362355@1] hdmitx: hdmitx_set_drm_pkt: disable drm pkt
[ 1.363164@0] call amhdmitx_init() ret=0
[ 1.363613@1] hdmitx: hdmitx_set_hdr10plus_pkt: null vsif
[ 1.364478@0] aml_vdac_config_probe: cpu_id:4, name:meson-sc2-vdac
[ 1.364813@1] [RX]-up_phy_addr = 0
[ 1.365722@0] aml_vdac_probe: ok
[ 1.365998@1] hdmitx: system: cann't get valid mode
[ 1.366641@0] call aml_vdac_init() ret=0
[ 1.367908@1] aml_media: cvbsout_probe, cpu_id:5,name:meson-sc2-cvbsout
[ 1.368359@1] aml_media: clk path:0x0
[ 1.368825@1] aml_media: find performance_pal config
[ 1.369457@1] aml_media: find performance_pal config
[ 1.370087@1] aml_media: find performance_ntsc config
[ 1.370739@1] aml_media: register cvbs module server ok
[ 1.371382@1] aml_media: register cvbs module vout2 server ok
[ 1.372114@1] aml_media: chrdev devno 533725184 for disp
[ 1.372913@1] aml_media: create cdev cvbs
[ 1.373288@1] aml_media: cvbsout_probe OK
[ 1.373903@1] call cvbs_init_module() ret=0
[ 1.374707@1] call lcd_init() ret=0
[ 1.374901@1] call esm_init() ret=0
[ 1.375480@1] vpu_security_probe ok.
[ 1.375773@1] call vpu_security_init() ret=0
[ 1.376547@1] aml_media: unable to register osd driver, r=0xffffffed
[ 1.377015@1] call osd_init_module() ret=-19
[ 1.377718@1] dummy_venc_probe OK
[ 1.378074@1] call dummy_venc_init() ret=0
[ 1.378646@1] call vout_sys_serve_init() ret=0
[ 1.379154@1] vout: fr_policy:2
[ 1.379462@1] vout: fr_policy:2
[ 1.380037@1] aml_media: mode is 1,sync_duration_den=1,sync_duration_num=50
[ 1.380755@1] vpu: vpu: vpu_dev_clk_gate_on: unsupport vpu mod: 37
[ 1.381524@1]
[ 1.381524@1] vdac_enable: 1, module_sel:0x8, private_flag:0x0
[ 1.382500@1] aml_media: cvbs_vdac_output: 1
[ 1.383015@1] aml_media: already display in uboot
[ 1.383612@1] vout: init mode 576cvbs set ok
[ 1.384155@1] vout: aml_vout_probe OK
[ 1.384714@1] call vout_init_module() ret=0
[ 1.385861@1] call gp_pll_init() ret=0
[ 1.386017@1] ion_dev ion_dev: assigned reserved memory node linux,ion-fb
[ 1.386523@1] ion_dev: __meson_ion_add_heap,heap->name=ion-dev heap->id=8
[ 1.387357@1] ion_dev: __meson_ion_add_heap,heap->name=ion-fb heap->id=9
[ 1.388628@1] ion_dev: __meson_ion_add_heap,heap->name=codec_mm_cma heap->id=16
[ 1.389220@1] call ion_init() ret=0
[ 1.389910@1] call mua_init() ret=0
[ 1.390171@1] call vfm_class_init() ret=0
[ 1.391164@1] aml_media: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[ 1.391614@1] aml_media: ge2d clock is 499 MHZ
[ 1.392072@1] aml_media: map io source 0x(____ptrval____),size=256 to 0x(____ptrval____)
[ 1.393063@1] aml_media: reserved mem is not used
[ 1.394396@1] aml_media: ge2d workqueue monitor start
[ 1.394568@2] call ge2d_init_module() ret=0
[ 1.395702@1] call configs_init_devices() ret=0
[ 1.396024@1] call lut_dma_init() ret=0
[ 1.396407@1] vpu: vpu: vpu_vmod_mem_pd_get: unsupport vpu mod: 30
[ 1.396865@1] fgrain_init failed, fg not support
[ 1.397433@1] fgrain_init failed, fg not support
[ 1.398021@1] secure_register module=1 ok
[ 1.398570@1] amvideom vsync irq: 52
[ 1.398991@1] amvideom meson-amvideom: IRQ vsync_viu2 not found
[ 1.399731@1] cannot get amvideom viu2 irq resource
[ 1.400418@1] create_ge2d_work_queue video task ok
[ 1.401419@1] create amvideo_poll attribute (null) fail
[ 1.401854@1] create_video_receiver video_render.0 (____ptrval____), path_id:2 success
[ 1.402656@1] create_video_receiver video_render.1 (____ptrval____), path_id:3 success
[ 1.403638@1] create_video_receiver video_render.2 (____ptrval____), path_id:5 success
[ 1.404644@1] create_video_receiver video_render.5 (____ptrval____), path_id:8 success
[ 1.405652@1] create_video_receiver video_render.6 (____ptrval____), path_id:9 success
[ 1.406689@1] call video_init() ret=0
[ 1.407309@1] call aml_lcd_extern_init() ret=0
[ 1.407683@1] call aml_bl_extern_init() ret=0
[ 1.408522@1] call aml_bl_init() ret=0
[ 1.408713@1] call ldim_dev_init() ret=0
[ 1.409322@1] call vout2_init_module() ret=0
[ 1.409868@1] call vout3_init_module() ret=0
[ 1.410441@1] PPMGRDRV: info: ppmgr_dev major:504
[ 1.410441@1]
[ 1.410656@1] ppmgr driver probe: irq:0
[ 1.411615@1] ppmgr: probe of ppmgr failed with error -22
[ 1.412313@1] call ppmgr_init_module() ret=0
[ 1.412830@1] call videosync_init() ret=0
[ 1.413471@1] aml_media: picdec_driver_probe called.
[ 1.413968@1] aml_media: picdec_driver_probe reserved_mem is not used.
[ 1.415047@1] call picdec_init_module() ret=0
[ 1.415344@1] amdolby_vision_init:module init
[ 1.416197@1]
[ 1.416197@1] amdolby_vision probe start & ver: 20181220
[ 1.416800@1]
[ 1.416800@1] cpu_id=5 tvmode=0
[ 1.417592@1] dolby_vision_init_receiver(dvel)
[ 1.417990@1] dolby_vision_init_receiver: dvel
[ 1.419017@1] get dma_vaddr (____ptrval____)
[ 1.419162@1] amdolby_vision_probe: ok
[ 1.419573@1] dovi disable in uboot
[ 1.420143@1] call amdolby_vision_init() ret=0
[ 1.420801@1] new arch is :1.
[ 1.420803@1] call tsync_module_init() ret=0
[ 1.421611@1] [tsync_pcr_init]init success.
[ 1.422027@1] call tsync_pcr_init() ret=0
[ 1.422553@1] call aml_bl_extern_i2c_init() ret=0
[ 1.423132@1] video_composer_module_init_1
[ 1.423962@1] video_composer_probe:ports[i].name=video_composer.0, i=0
[ 1.424594@1] video_composer_probe:ports[i].name=video_composer.1, i=1
[ 1.425373@1] video_composer_probe num=2
[ 1.425902@1] call video_composer_module_init() ret=0
[ 1.426457@1] videotunnel init
[ 1.427184@1] call meson_videotunnel_init() ret=0
[ 1.427445@1] call aml_lcd_extern_i2c_dev_init() ret=0
[ 1.428072@1] aml_vecm_init:module init
[ 1.428872@1]
[ 1.428872@1] VECM probe start
[ 1.429432@1] Can't find lut3d_en.
[ 1.429670@1] ID:0x0 map phy: 0xff000000 0x(____ptrval____)
[ 1.430347@1] ID:0x1 map phy: 0xff63c000 0x(____ptrval____)
[ 1.431029@1] ID:0x2 map phy: 0x0 0x0000000000000000
[ 1.431657@1] Codec io: No support bus type 2 to write.
[ 1.432318@1] Codec io: write cbus reg f2 error -1
[ 1.432929@1] vlock clk not cfg
[ 1.433327@1] Codec io: No support bus type 2 to read.
[ 1.433975@1] Codec io: read cbus reg 20 error -1
[ 1.434583@1] Codec io: No support bus type 2 to read.
[ 1.435221@1] Codec io: read cbus reg 21 error -1
[ 1.435820@1] enc: org Line addr:0x1cbb val: 524
[ 1.436403@1] enc: org Pixel addr:0x1cb0 val: 1715
[ 1.437008@1] vlock_status_init vlock_en:0
[ 1.438235@1] aml_vecm_probe: ok
[ 1.438374@1] call aml_vecm_init() ret=0
[ 1.438854@1] ionvideo-000: V4L2 device registered as video13
[ 1.439966@1] ionvideo-008: V4L2 device registered as video21
[ 1.440176@1] call ionvideo_init() ret=0
[ 1.440765@1] v4lvideo-000: V4L2 device registered as video30
[ 1.441971@1] v4lvideo-008: V4L2 device registered as video38
[ 1.442003@1] call v4lvideo_init() ret=0
[ 1.442523@1] amlvid:info: amlvideo_init called
[ 1.442525@1] amlvid:info: amlvideo_create_instance called
[ 1.442525@1]
[ 1.443178@1] amlvideo-000: V4L2 device registered as video10
[ 1.444730@1] amlvid:info: amlvideo_create_instance called
[ 1.444730@1]
[ 1.444733@1] amlvid:info: v4l2_dev.name=:amlvideo-001
[ 1.444733@1]
[ 1.445755@1] amlvideo-001: V4L2 device registered as video23
[ 1.447256@1] call amlvideo_init() ret=0
[ 1.448495@1] amlvideo2: V4L2 device registered as video12
[ 1.448612@1] call amlvideo2_init() ret=0
[ 1.449004@1] dil:dil_init.
[ 1.449618@1] dil:dil_init ok.
[ 1.449751@1] call dil_init() ret=0
[ 1.450196@1] DI: di_module_init ok.
[ 1.450818@1] call di_module_init() ret=0
[ 1.451160@1] dim:dim_module_init
[ 1.451896@1] dim:dim_probe:
[ 1.451959@1] dim:dim_probe: major 500
[ 1.452704@1] di_que_alloc:ok
[ 1.452811@1] di_que_alloc:ok
[ 1.453187@1] di_que_alloc:ok
[ 1.453570@1] di_que_alloc:ok
[ 1.453950@1] dim:qbuf_int:qbuf_blk:end
[ 1.454486@1] dim:qbuf_int:qbuf_mem:end
[ 1.454922@1] dim:qbuf_int:qbuf_pat:end
[ 1.455411@1] dim:qbuf_int:qbuf_iat:end
[ 1.455899@1] dim:qbuf_int:qbuf_blk:end
[ 1.456386@1] dim:qbuf_int:qbuf_mem:end
[ 1.456874@1] dim:qbuf_int:qbuf_pat:end
[ 1.457359@1] dim:qbuf_int:qbuf_iat:end
[ 1.457847@1] dim:qbuf_int:qbuf_blk:end
[ 1.458346@1] dim:qbuf_int:qbuf_mem:end
[ 1.458821@1] dim:qbuf_int:qbuf_pat:end
[ 1.459309@1] dim:qbuf_int:qbuf_iat:end
[ 1.459798@1] dim:qbuf_int:qbuf_blk:end
[ 1.460286@1] dim:qbuf_int:qbuf_mem:end
[ 1.460774@1] dim:qbuf_int:qbuf_pat:end
[ 1.461260@1] dim:qbuf_int:qbuf_iat:end
[ 1.461746@1] dim:di_cfg_top_init_val:
[ 1.462220@1] dim:di_cfg_top_init_val:finish
[ 1.462775@1] dim:dim_tmode_preset:
[ 1.463206@1] dim: ch[0]:tmode[1]
[ 1.463629@1] dim: ch[1]:tmode[1]
[ 1.464051@1] dim: ch[2]:tmode[2]
[ 1.464473@1] dim: ch[3]:tmode[2]
[ 1.464912@1] dev_vframe_init finish
[ 1.465485@1] dim:match name: dim_sc2:id[37]
[ 1.465895@1] dim:no reserved mem.
[ 1.466336@1] dim:di_cfg_top_dts
[ 1.466739@1] dim: flag_cma:4
[ 1.467126@1] dim:di_cfg_top_dts:en_dat:0x3
[ 1.467667@1] dim:pre_irq:65
[ 1.468020@1] dim:post_irq:66
[ 1.468403@1] di_multi multi-di: IRQ aisr_irq not found
[ 1.469056@1] dim:cannot get aisr_irq
[ 1.469522@1] DI: dim_probe allocate rdma channel 0.
[ 1.470166@1] DI: vpu clkb <334000000, 667000000>
[ 1.470777@1] dim:vpu clkb =666666656.
[ 1.471268@1] vpu: vpu: error: vpu_vmod_mem_pd_get: invalid vpu mod: 72
[ 1.472121@1] DI: afbc_prob:ver[5],_sc2,mode[2]
[ 1.472631@1] dim:dip_init_pq_ops:37:l1_sc2
[ 1.473173@1] DI: support multi decoding 0xfd~0xfe~0xff.
[ 1.473902@1] vpu: vpu: vpu_dev_clk_gate_on: unsupport vpu mod: 72
[ 1.474634@1] dim:hw_init_v3:
[ 1.474993@1] dim: 0x17c5:0x1
[ 1.475372@1] dim: 0x17c6:0x1
[ 1.475751@1] dim: 0x1730:0xc3fe0000
[ 1.476225@1] vpu: vpu: vpu_dev_clk_gate_off: unsupport vpu mod: 72
[ 1.477002@1] dim:dcntr_prob
[ 1.477373@1] dim:qbuf_int:qbuf_sct:end
[ 1.477862@1] dim:qbuf_int:qbuf_nin:end
[ 1.478349@1] dim:bufq_nin_int:
[ 1.478748@1] dim:qbuf_int:qbuf_ndis:end
[ 1.479241@1] dim:bufq_ndis_int:
[ 1.479652@1] dim:qfp_int:np_ready:end
[ 1.480127@1] dim:qfp_int:np_kback:end
[ 1.480609@1] dim:qfp_int:npst:end
[ 1.481044@1] dim:qbuf_int:qbuf_sct:end
[ 1.481531@1] dim:qbuf_int:qbuf_nin:end
[ 1.482013@1] dim:bufq_nin_int:
[ 1.482449@1] dim:qbuf_int:qbuf_ndis:end
[ 1.482913@1] dim:bufq_ndis_int:
[ 1.483324@1] dim:qfp_int:np_ready:end
[ 1.483800@1] dim:qfp_int:np_kback:end
[ 1.484277@1] dim:qfp_int:npst:end
[ 1.484713@1] dim:qbuf_int:qbuf_sct:end
[ 1.485205@1] dim:qbuf_int:qbuf_nin:end
[ 1.485686@1] dim:bufq_nin_int:
[ 1.486091@1] dim:qbuf_int:qbuf_ndis:end
[ 1.486595@1] dim:bufq_ndis_int:
[ 1.486997@1] dim:qfp_int:np_ready:end
[ 1.487473@1] dim:qfp_int:np_kback:end
[ 1.487950@1] dim:qfp_int:npst:end
[ 1.488391@1] dim:qbuf_int:qbuf_sct:end
[ 1.488877@1] dim:qbuf_int:qbuf_nin:end
[ 1.489358@1] dim:bufq_nin_int:
[ 1.489763@1] dim:qbuf_int:qbuf_ndis:end
[ 1.490256@1] dim:bufq_ndis_int:
[ 1.490678@1] dim:qfp_int:np_ready:end
[ 1.491145@1] dim:qfp_int:np_kback:end
[ 1.491622@1] dim:qfp_int:npst:end
[ 1.492056@1] .
[ 1.492782@1] .
[ 1.493413@1] dim_probe:ok
[ 1.493584@1] dim:dim_module_init finish
[ 1.493790@1] call dim_module_init() ret=0
[ 1.495343@1] input: cec_input as /devices/virtual/input/input1
[ 1.495531@1] cec: using cec:1
[ 1.496043@1] cec: 2 irq src, a:54, b:53
[ 1.496884@1] cec: wakeup_reason:0x0
read_ao no reg:0x11
write_ao no reg:0x11[cec_get_wakeup_info1]: info=0x0
[ 1.501587@1] cec: wakeup_data: 0x0
[ 1.501606@1] cec: aml_cec_probe success end
[ 1.502200@1] call cec_init() ret=0
[ 1.502811@1] call gdc_driver_init() ret=0
[ 1.503035@1] call amvdec_656in_init_module() ret=0
[ 1.503682@1] call adc_init() ret=0
[ 1.504092@1] call tvafe_drv_init() ret=0
[ 1.504522@1] call vbi_init() ret=0
[ 1.505012@1] call tvafe_avin_detect_init() ret=0
[ 1.505465@1] vdin_drv_init: major 498 ver:ver:2021-0301: buffer recycle is not right
[ 1.506772@1] vdin_drv_init: vdin driver init done
[ 1.507046@1] call vdin_drv_init() ret=0
[ 1.507775@1] [RX]-hdmirx_init
[ 1.507934@1] call hdmirx_init() ret=0
[ 1.508409@1] ESM HLD: Initializing...
[ 1.509027@1] call hld_init() ret=0
[ 1.509332@1] [viuin..]viuin_init_module viuin module init
[ 1.510393@1] [viuin..]viuin_probe probe ok.
[ 1.510625@1] [viuin..]viuin_init_module done
[ 1.511119@1] call viuin_init_module() ret=0
[ 1.511817@1] resman: amresource_mgr init success
[ 1.512257@1] call resman_init() ret=0
[ 1.512903@1] atv_demod: aml_atvdemod_init: OK, atv demod version: V2.28.
[ 1.513589@1] call aml_atvdemod_init() ret=0
[ 1.514418@1] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[ 1.514792@1] call aml_dtvdemod_init() ret=0
[ 1.515470@1] vsync_pts_inc 1800 1/50
[ 1.515801@1] call msync_init() ret=0
[ 1.516264@1] ### media_main_init() end
[ 1.519448@1] load module: snd_soc_dummy_codec
[ 1.531784@1] load module: snd_soc
[ 1.532127@1] aml_snd_reg_map[0], reg:fe331000, size:400
[ 1.532215@1] aml_snd_reg_map[1], reg:fe330000, size:1000
[ 1.532897@1] aml_snd_reg_map[2], reg:fe331400, size:400
[ 1.533571@1] aml_snd_reg_map[3], reg:fe332000, size:1000
[ 1.534252@1] aml_snd_reg_map[4], reg:fe331800, size:400
[ 1.534948@1] aml_snd_reg_map[5], reg:fe331c00, size:104
[ 1.535597@1] aml_snd_reg_map[6], reg:fe334000, size:104
[ 1.536256@1] amlogic auge_snd_iomap probe done
[ 1.537108@1] call auge_snd_iomap_init() ret=0
[ 1.537699@1] call earc_init() ret=0
[ 1.540321@1] audio_clocks: audio_clocks_probe done
[ 1.540847@1] regmap_resource, rx_cmdc, start:0xfe333800, size:0x400
[ 1.541074@1] regmap_resource, rx_dmac, start:0xfe333c00, size:0x200
[ 1.541867@1] regmap_resource, rx_top, start:0xfe333e00, size:0x200
[ 1.542441@1] call audio_clocks_init() ret=0
[ 1.542677@0] EARC fe333800.earc: Can't get earc gate
[ 1.543502@1] asoc debug: aml_audio_controller_probe-118
[ 1.543865@0] EARC fe333800.earc: Check whether support eARC TX
[ 1.544831@1] call audio_controller_init() ret=0
[ 1.545243@0] EARC fe333800.earc: Check whether support eARC TX
[ 1.546001@1] audio-ddr-manager fe330000.audiobus:ddr_manager: 0, irqs toddr 26, frddr 30
[ 1.546591@0] EARC fe333800.earc: Check whether support eARC TX
[ 1.546595@1] EARC fe333800.earc: Check whether support eARC TX
[ 1.546610@1] EARC fe333800.earc: IRQ earc_tx not found
[ 1.547618@1] audio-ddr-manager fe330000.audiobus:ddr_manager: 1, irqs toddr 27, frddr 31
[ 1.548353@0] EARC fe333800.earc: platform get irq earc_tx failed, Check whether support eARC TX
[ 1.549111@1] audio-ddr-manager fe330000.audiobus:ddr_manager: 2, irqs toddr 28, frddr 32
[ 1.549759@0] EARC fe333800.earc: earc_platform_probe, irq_earc_rx:37, irq_earc_tx:-6
[ 1.550844@1] audio-ddr-manager fe330000.audiobus:ddr_manager: 3, irqs toddr 29, frddr 33
[ 1.551907@0] Codec io: No support bus type 2 to write.
[ 1.553137@1] call audio_ddr_init() ret=0
[ 1.553909@0] Codec io: write cbus reg e8 error -1
[ 1.555101@1] effect_platform_probe, line:596
[ 1.555989@0] EARC fe333800.earc: registered eARC platform
[ 1.556174@1] eqdrc_clk_set, src pll:399999994, clk:199999997
[ 1.558735@0] effect_platform_probe module:1, lane_mask:1, ch_mask:3
[ 1.559952@0] call effect_platform_init() ret=0
[ 1.560335@0] call extn_init() ret=0
[ 1.560678@0] call audio_locker_init() ret=0
[ 1.561281@0] datain_src:4, datain_chnum:2, datain_chumask:3
[ 1.561805@0] datalb_src:1, datalb_chnum:2, datalb_chmask:3
[ 1.562674@0] datain_lane_mask:0x1, datalb_lane_mask:0x1
[ 1.563201@0] datalb_format: 1, chmask for lanes: 0x3
[ 1.563965@0] loopback_platform_probe, p_loopback->id:0 register soc platform
[ 1.564986@0] call loopback_init() ret=0
[ 1.565573@0] meson-sc2-pinctrl fe000000.apb4:pinctrl@4000: pin GPIOC_4 already requested by fe08a000.sd; cannot claim for fe330000.audiobus:pdm
[ 1.566882@0] meson-sc2-pinctrl fe000000.apb4:pinctrl@4000: pin-22 (fe330000.audiobus:pdm) status -22
[ 1.568026@0] meson-sc2-pinctrl fe000000.apb4:pinctrl@4000: could not request pin 22 (GPIOC_4) from group pdm_dclk_c on device pinctrl-meson
[ 1.569617@0] snd_pdm fe330000.audiobus:pdm: Error applying setting, reverse things back
[ 1.570653@0] snd_pdm fe330000.audiobus:pdm: Can't get pdm pinmux
[ 1.571429@0] default set lane_mask_in as all lanes.
[ 1.572032@0] aml_pdm_platform_probe pdm filter mode from dts:1
[ 1.572779@0] aml_pdm_platform_probe pdm train sample count from dts:14
[ 1.573628@0] aml_pdm_platform_probe, register soc platform
[ 1.574564@0] call pdm_init() ret=0
[ 1.575175@0] call resample_drv_init() ret=0
[ 1.575808@0] Spdif id 0 tuning clk enable:1
[ 1.576221@0] call spdif_init() ret=0
[ 1.576917@0] call audio_pinctrl_init() ret=0
[ 1.577367@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 8
[ 1.577615@0] snd_tdm fe330000.audiobus:tdm@0: lane_mask_out = 0
[ 1.578532@0] No channel mask node Channel_Mask
[ 1.579041@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
[ 1.579678@0] TDM id 1 samesource_sel:3
[ 1.580158@0] snd_tdm fe330000.audiobus:tdm@1: lane_mask_out = 1
[ 1.580976@0] TDM id 1 output clk enable:1
[ 1.581464@0] No channel mask node Channel_Mask
[ 1.582136@0] TDM id 1 tuning clk enable:1
[ 1.582626@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[ 1.583279@0] TDM id 2 i2s2hdmi:1
[ 1.583689@0] snd_tdm fe330000.audiobus:tdm@2: lane_mask_out = f
[ 1.584472@0] snd_tdm fe330000.audiobus:tdm@2: aml_tdm_get_pins error!
[ 1.585271@0] No channel mask node Channel_Mask
[ 1.586272@0] call tdm_init() ret=0
[ 1.586419@0] vad_platform_probe, failed to get vad wakeup sample rate
[ 1.587111@0] vad_platform_probe, vad wakeup sample rate = 16000
[ 1.587935@0] vad_platform_probe vad data source sel:4, level:1
[ 1.588785@0] input: vad_keypad as /devices/platform/soc/fe330000.audiobus/fe330000.audiobus:vad/input/input2
[ 1.590298@0] call vad_drv_init() ret=0
[ 1.590506@0] Register vad
[ 1.590697@0] call vad_dev_init() ret=0
[ 1.591446@0] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:1, ret -517
[ 1.592249@0] asoc-aml-card auge_sound: parse dai_link-1 fail
[ 1.592976@0] asoc-aml-card auge_sound: aml_card_probe, aml_card_parse_of error -517 PROBE RETRY
[ 1.594076@0] aml_card_probe error ret:-517
[ 1.594662@0] call aml_card_init() ret=0
[ 1.596532@0] load module: snd_soc_aml_t9015
[ 1.596759@0] aml_codec_T9015 fe01a000.t9015: aml_T9015_audio_codec_probe
[ 1.597289@0] T9015 acodec tdmout index:1
[ 1.598464@0] asoc-aml-card auge_sound: IRQ audio_exception64 not found
[ 1.598729@0] call standard reset interface
[ 1.600258@0] load module: ad82584f
[ 1.601283@2] load module: adc_keypad
[ 1.603996@2] load module: aml_crypto_dma
[ 1.605179@2] aml_dma fe440400.aml_dma: Aml dma
[ 1.607702@2] aml_aes_dma fe440400.aml_dma:aml_aes: Aml AES_dma
[ 1.608931@0] aml_sha_dma fe440400.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.610479@0] aml_tdes_dma fe440400.aml_dma:aml_tdes: Aml TDES_dma
[ 1.611426@0] aml_crypto_dev fe440400.aml_dma:crypto: Aml crypto device
[ 1.613912@0] load module: aml_ddr_tool
[ 1.614441@0] ddr_bandwidth_probe, 835
[ 1.614467@0] chip type:0x32
[ 1.614626@0] can't find sec_base, set bytes_per_cycle to 16
[ 1.616029@0] dmc_monitor_probe
[ 1.616051@0] dmc_monitor_probe, chip type:50
[ 1.623881@0] load module: aml_drm
[ 1.623917@0] [drm] meson_drm_main_init() start
[ 1.624605@0] [drm] [am_meson_cvbs_probe:278] in
[ 1.625087@0] [drm] [am_meson_hdmi_probe] in
[ 1.625764@0] [am_meson_vpu_probe] in
[ 1.625795@0] [drm] [am_meson_vpu_probe] out
[ 1.626587@0] [am_meson_drv_probe] in
[ 1.626863@0] [am_meson_drv_probe] out
[ 1.627480@0] [drm] id=0,index=0,num_in_links=0,num_out_links=1
[ 1.628026@0] [drm] in_mask=0x0,out_mask=0x8
[ 1.628575@0] [drm] id=1,index=1,num_in_links=0,num_out_links=1
[ 1.629316@0] [drm] in_mask=0x0,out_mask=0x10
[ 1.629879@0] [drm] id=2,index=2,num_in_links=0,num_out_links=1
[ 1.630632@0] [drm] in_mask=0x0,out_mask=0x20
[ 1.631173@0] [drm] id=3,index=0,num_in_links=1,num_out_links=1
[ 1.631915@0] [drm] in_mask=0x1,out_mask=0x200
[ 1.632484@0] [drm] id=4,index=1,num_in_links=1,num_out_links=1
[ 1.633226@0] [drm] in_mask=0x2,out_mask=0x80
[ 1.633785@0] [drm] id=5,index=2,num_in_links=1,num_out_links=1
[ 1.634539@0] [drm] in_mask=0x4,out_mask=0x100
[ 1.635097@0] [drm] id=6,index=0,num_in_links=1,num_out_links=1
[ 1.635836@0] [drm] in_mask=0x400,out_mask=0x800
[ 1.636426@0] [drm] id=7,index=1,num_in_links=1,num_out_links=1
[ 1.637170@0] [drm] in_mask=0x10,out_mask=0x200
[ 1.637749@0] [drm] id=8,index=2,num_in_links=1,num_out_links=1
[ 1.638499@0] [drm] in_mask=0x20,out_mask=0x200
[ 1.639074@0] [drm] id=9,index=0,num_in_links=3,num_out_links=2
[ 1.639813@0] [drm] in_mask=0x188,out_mask=0xc00
[ 1.640407@0] [drm] id=10,index=0,num_in_links=1,num_out_links=1
[ 1.641156@0] [drm] in_mask=0x200,out_mask=0x40
[ 1.641735@0] [drm] id=11,index=0,num_in_links=2,num_out_links=0
[ 1.642639@0] [drm] in_mask=0x240,out_mask=0x0
[ 1.643057@0] [drm] id=12,index=0,num_in_links=0,num_out_links=0
[ 1.643810@0] [drm] in_mask=0x0,out_mask=0x0
[ 1.644368@0] [drm] id=13,index=1,num_in_links=0,num_out_links=0
[ 1.645110@0] [drm] in_mask=0x0,out_mask=0x0
[ 1.645683@0] [drm] [am_meson_vpu_bind] in
[ 1.646188@0] meson-vpu ff900000.drm-vpu: assigned reserved memory node linux,meson-fb
[ 1.647190@0] [drm] of read reservememsize=0x800000
[ 1.648532@0] [drm] ------ NO reserved dma
[ 1.648604@1] [drm] osd plane 0 create done
[ 1.648941@1] [drm] osd plane 1 create done
[ 1.649444@1] [drm] osd plane 2 create done
[ 1.649951@1] [drm] create 3 osd plane done
[ 1.650543@1] [drm] video plane 0 create done
[ 1.651046@1] [drm] video plane 1 create done
[ 1.651586@1] [drm] create 2 video plane done
[ 1.652139@1] [drm] am_meson_crtc_create
[ 1.652685@1] rdma: rdma_register, rdma_table_addr ffffffc011885000 phy: c1254000 reg_buf ffffff80c24e2000
[ 1.653852@1] rdma: rdma_register success, handle 3 table_size 4096
[ 1.654807@1] [drm] [am_meson_vpu_bind] out
[ 1.655295@1] meson drm-subsystem: bound ff900000.drm-vpu (ops am_meson_vpu_component_ops [aml_drm])
[ 1.656323@1] [drm] [am_meson_hdmi_bind] in
[ 1.656876@1] [drm] [am_meson_hdmi_bind] out
[ 1.657439@1] meson drm-subsystem: bound drm-amhdmitx (ops am_meson_hdmi_ops [aml_drm])
[ 1.658417@1] [drm] [am_meson_cvbs_bind] in
[ 1.658946@1] [drm] [am_meson_cvbs_bind] out
[ 1.659515@1] meson drm-subsystem: bound drm-amcvbsout (ops am_meson_cvbs_ops [aml_drm])
[ 1.660491@1] [drm] mode_config crtc number:1
[ 1.661260@1] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.661899@1] [drm] No driver support for vblank timestamp query.
[ 1.662712@1] [drm] width=1920,height=1080,start_addr=0x0x000000007f800000,size=8388608
[ 1.663675@1] [drm] bpp=16,alloc_flag=1, osd_reverse=0
[ 1.664326@1] [drm] outputmode=576cvbs
[ 1.664818@1] [drm] meson_fb[id:68,ref:1]=0x(____ptrval____),meson_fb->bufp[0]=0x0000000000000000
[ 1.666039@1] [drm:am_meson_drm_bind [aml_drm]] *ERROR* Connecotr[11] status[2]
[ 1.666890@1] [drm] hdisplay = 720
[ 1.666890@1] vdisplay = 576
[ 1.666890@1] vrefresh = 50
[ 1.668057@1] [drm:am_meson_drm_bind [aml_drm]] *ERROR* Found Connecotr[13] mode[576cvbs]
[ 1.669062@1] [drm:am_meson_drm_bind [aml_drm]] *ERROR* mode private flag 0
[ 1.670023@1] [drm] am_meson_crtc_atomic_enable:in
[ 1.670525@1] [drm] am_meson_crtc_atomic_enable: 576cvbs, 1
[ 1.671393@1] [drm] am_meson_crtc_atomic_enable-1:out
[ 1.671897@1] aml_media: mode is 1,sync_duration_den=1,sync_duration_num=50
[ 1.672744@1] aml_media: clk_gate is already on
[ 1.673311@1]
[ 1.673311@1] vdac_enable: 1, module_sel:0x8, private_flag:0x8
[ 1.674266@1] aml_media: cvbs_vdac_output: 1
[ 1.674830@1] aml_media: already display in uboot
[ 1.675399@1] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE
[ 1.676168@1] vsync_pts_inc 1800 1/50
[ 1.682457@1] [drm] am_meson_drm_fbdev_init in
[ 1.682515@1] [drm] hdisplay = 720
[ 1.682515@1] vdisplay = 576
[ 1.682515@1] vrefresh = 50
[ 1.683530@1] [drm] mode_cmd.width = 1920
[ 1.683994@1] [drm] mode_cmd.height = 2160
[ 1.684514@1] [drm] mode_cmd.pixel_format = 875713089-875713089
[ 1.685275@1] [drm] meson_fb[id:70,ref:1]=0x(____ptrval____),meson_fb->bufp[0]=0x0000000000000000
[ 1.686661@1] meson drm-subsystem: fb0: mesondrmfb frame buffer device
[ 1.706364@1] [drm] create fbdev success.
[ 1.706387@2] [drm] create fbdev for primary plane [(____ptrval____)]
[ 1.707020@2] [drm] hdisplay = 720
[ 1.707020@2] vdisplay = 576
[ 1.707020@2] vrefresh = 50
[ 1.708201@2] [drm] mode_cmd.width = 1920
[ 1.708660@2] [drm] mode_cmd.height = 2160
[ 1.709181@2] [drm] mode_cmd.pixel_format = 875713089-875713089
[ 1.709937@2] [drm] meson_fb[id:71,ref:1]=0x(____ptrval____),meson_fb->bufp[0]=0x0000000000000000
[ 1.711523@2] meson drm-subsystem: fb1: mesondrmfb frame buffer device
[ 1.711868@2] [drm] create fbdev success.
[ 1.712377@2] [drm] create fbdev for plane [1]-[(____ptrval____)]
[ 1.713166@2] [drm] hdisplay = 720
[ 1.713166@2] vdisplay = 576
[ 1.713166@2] vrefresh = 50
[ 1.714367@2] [drm] mode_cmd.width = 1920
[ 1.714813@2] [drm] mode_cmd.height = 2160
[ 1.715335@2] [drm] mode_cmd.pixel_format = 875713089-875713089
[ 1.716102@2] [drm] meson_fb[id:72,ref:1]=0x(____ptrval____),meson_fb->bufp[0]=0x0000000000000000
[ 1.717884@2] meson drm-subsystem: fb2: mesondrmfb frame buffer device
[ 1.718021@2] [drm] create fbdev success.
[ 1.718543@2] [drm] create fbdev for plane [2]-[(____ptrval____)]
[ 1.719299@2] [drm] am_meson_drm_fbdev_init create 2 out
[ 1.721165@2] [drm] Initialized meson 1.0.0 20180321 for drm-subsystem on minor 0
[ 1.721560@2] [drm] meson_drm_main_init() end
[ 1.723471@2] load module: aml_irblaster
[ 1.725252@2] load module: mdio_mux
[ 1.725974@2] load module: aml_mdio_g12a
[ 1.727953@2] load module: aml_rng
[ 1.728526@2] random: crng init done
[ 1.729680@1] load module: amlogic_amaudio
[ 1.729705@2] amaudio: amaudio: driver amaudio init!
[ 1.730613@2] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[ 1.732622@0] load module: audio_data
[ 1.734161@0] load module: audiodsp
[ 1.734194@0] audio_dsp: [dsp]register dsp to char divece(272)
[ 1.735905@0] load module: dolby_fw
[ 1.738140@0] load module: phylink
[ 1.739347@0] load module: pps_core
[ 1.739406@0] pps_core: LinuxPPS API ver. 1 registered
[ 1.739752@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.742345@0] load module: ptp
[ 1.742415@0] PTP clock support registered
[ 1.746864@0] load module: stmmac
[ 1.748154@0] load module: stmmac_platform
[ 1.748880@0] load module: dwmac_dwc_qos_eth
[ 1.750281@0] load module: dwmac_meson8b
[ 1.750642@0] meson8b-dwmac fdc00000.ethernet: IRQ eth_wake_irq not found
[ 1.750948@0] meson8b-dwmac fdc00000.ethernet: IRQ eth_lpi not found
[ 1.751869@0] meson8b-dwmac fdc00000.ethernet: PTP uses main clock
[ 1.752531@0] meson8b-dwmac fdc00000.ethernet: no reset control found
[ 1.753953@0] meson8b-dwmac fdc00000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 1.754264@0] meson8b-dwmac fdc00000.ethernet: DWMAC1000
[ 1.754973@0] meson8b-dwmac fdc00000.ethernet: DMA HW capability register supported
[ 1.755909@0] meson8b-dwmac fdc00000.ethernet: RX Checksum Offload Engine supported
[ 1.756870@0] meson8b-dwmac fdc00000.ethernet: COE Type 2
[ 1.757554@0] meson8b-dwmac fdc00000.ethernet: TX Checksum insertion supported
[ 1.758481@0] meson8b-dwmac fdc00000.ethernet: Wake-Up On Lan supported
[ 1.759329@0] meson8b-dwmac fdc00000.ethernet: Normal descriptors
[ 1.760067@0] meson8b-dwmac fdc00000.ethernet: Ring mode enabled
[ 1.760826@0] meson8b-dwmac fdc00000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.761859@0] meson8b-dwmac fdc00000.ethernet: device MAC address 02:ad:32:01:87:e6
[ 1.763185@0] libphy: stmmac: probed
[ 1.763864@0] aml_cust_setting
[ 1.763886@0] meson8b-dwmac fdc00000.ethernet: Unable to get resource(350)
[ 1.764529@0] no mac_wol
[ 1.766214@0] load module: gpio_keypad
[ 1.768707@0] load module: hifidsp
[ 1.769147@0] hifi4dsp fe340000.hifi4dsp: Can't retrieve dsp-monitor-period-ms
[ 1.769365@0] hifi4dsp: Dsp boot from DDR !
[ 1.769935@0] hifi4dsp fe340000.hifi4dsp: failed to get dspb base address
[ 1.770787@0] hifi4dsp fe340000.hifi4dsp: Can't retrieve srambase
[ 1.771528@0] hifi4dsp fe340000.hifi4dsp: assigned reserved memory node linux,dsp_fw
[ 1.773146@0] hifi4dsp: of read fwmem phys = [0x30000000 0x800000]
[ 1.773279@0] hifi4dsp fe340000.hifi4dsp: failed to get dsp share memory resource.
[ 1.774227@0] hifi4dsp:
[ 1.774227@0] register dsp-0 start
[ 1.775141@0] hifi4dsp: hifi4dsp0, firmware :base:0x30000000, size:0x800000, virt:ffffffc011cf5000
[ 1.776298@0] hifi4dsp: register dsp _p_dsp_miscdev->priv alloc success
[ 1.776317@0] hifi4dsp: register dsp-0 done
[ 1.777480@0] hifi4dsp fe340000.hifi4dsp: failed to get dsp0 status register.
[ 1.778389@0] hifi4dsp: hifi4dsp_platform_probe done
[ 1.780544@0] load module: leds_tlc59116
[ 1.781551@0] load module: leds_state
[ 1.782891@0] load module: meson_clk_debug
[ 1.784006@0] load module: meson_cpufreq
[ 1.784800@0] meson_cpufreq: value of voltage_tolerance 0
[ 1.784825@0] meson_cpufreq: value of low_dsu_rate 1200000
[ 1.785570@0] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[ 1.786284@0] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1512000 KHz
[ 1.788655@0] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1608000 KHz
[ 1.791913@0] load module: meson_gxl
[ 1.792955@0] load module: meson_gxbb_wdt
[ 1.793211@0] meson-gxbb-wdt fe002100.watchdog: feeding watchdog mode: [kernel]
disable wdt
[ 1.796412@0] load module: meson_ir
[ 1.797134@0] input: ir_keypad as /devices/platform/fe084040.ir/input/input3
[ 1.797646@0] meson-ir fe084040.ir: ptable->tab.cursor_code.fn_key_scancode = 0x0
[ 1.798284@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_left_scancode = 0x51
[ 1.799326@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_right_scancode = 0x50
[ 1.800330@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_up_scancode = 0x16
[ 1.801326@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_down_scancode = 0x1a
[ 1.802513@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_ok_scancode = 0x13
[ 1.803360@0] meson-ir fe084040.ir: ptable->tab.cursor_code.fn_key_scancode = 0x48
[ 1.804305@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_left_scancode = 0x37
[ 1.805323@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_right_scancode = 0x39
[ 1.806411@0] aml_codec_T9015 fe01a000.t9015: ASoC: source widget Left DAC overwritten
[ 1.807529@0] master_mode(1), binv(1), finv(0) out_skew(2), in_skew(3)
[ 1.808240@0] asoc-aml-card auge_sound: soc:dummy <-> TDM-A mapping ok
[ 1.809015@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[ 1.809874@0] asoc-aml-card auge_sound: fe01a000.t9015 <-> TDM-B mapping ok
[ 1.810734@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[ 1.811102@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_up_scancode = 0x38
[ 1.811587@2] asoc-aml-card auge_sound: soc:dummy <-> TDM-C mapping ok
[ 1.812517@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_down_scancode = 0x40
[ 1.813380@2] asoc-aml-card auge_sound: soc:dummy <-> fe330000.audiobus:pdm mapping ok
[ 1.814369@0] meson-ir fe084040.ir: ptable->tab.cursor_code.cursor_ok_scancode = 0x13
[ 1.816360@2] asoc-aml-card auge_sound: soc:dummy <-> SPDIF mapping ok
[ 1.817273@0] asoc-aml-card auge_sound: soc:dummy <-> SPDIF-B mapping ok
[ 1.818026@0]
[ 1.818026@0] loopback_dai_set_sysclk, 0, 12288000, 0
[ 1.818361@0] load module: meson_jtag
[ 1.818888@2] asoc loopback_dai_set_fmt, 0x4010, 00000000d8b2e3d8
[ 1.820159@0] asoc-aml-card auge_sound: soc:dummy <-> fe330000.audiobus:loopback@0 mapping ok
[ 1.821401@0] load module: meson_saradc
[ 1.821942@2] meson-saradc fe026000.saradc: fe026000.saradc supply vref not found, using dummy regulator
[ 1.822569@2] snd_card_add_kcontrols card:0000000066085931
[ 1.823631@0] no node audio_effect for eq/drc info!
[ 1.824547@0] load module: reboot
[ 1.824721@2] Enable disable_nonboot_cpus in syscore shutdown.
[ 1.825104@2] libphy: mdio_mux: probed
[ 1.825875@0] libphy: mdio_mux: probed
[ 1.826516@0] load module: reg_access
[ 1.827573@2] load module: rtc_meson_vrtc
[ 1.836567@2] wzh txamp 0x32
[VRTC]: xMboxGetRTC val=0x62237b47
[ 1.841174@0] meson-vrtc fe010288.rtc: registered as rtc0
[ 1.841216@2] meson-vrtc fe010288.rtc: setting system clock to 2022-03-05T15:01:28 UTC (1646492488)
[ 1.844052@2] load module: snd_hwdep
[ 1.845375@2] load module: snd_usbmidi_lib
[ 1.851176@2] load module: snd_usb_audio
[ 1.851279@2] usbcore: registered new interface driver snd-usb-audio
[ 1.853658@2] load module: thermal
[ 1.854022@2] meson ts init
[ 1.854052@2] tsensor id: 0
[ 1.854154@2] tsensor rtemp :110000
[ 1.870544@2] meson ts init
[ 1.870570@3] tsensor id: 1
[ 1.870608@3] tsensor rtemp :110000
[ 1.886830@3] meson_cdev probe
[ 1.886853@3] meson_cdev index: 0
[ 1.887034@3] cpucore_cooling_register, max_cpu_core_num:4
[ 1.887718@3] meson_cdev index: 1
[ 1.888068@3] meson_cdev probe done
[ 1.917895@3] e2fsck: e2fsck 1.45.4 (23-Sep-2019)
[ 1.920362@3] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 1.922307@2] e2fsck: Pass 2: Checking directory structure
[ 1.923482@2] e2fsck: Pass 3: Checking directory connectivity
[ 1.923536@3] e2fsck: Pass 4: Checking reference counts
[ 1.924192@3] e2fsck: Pass 5: Checking group summary information
[ 1.927667@3] e2fsck: /dev/block/by-name/metadata: 24/4096 files (0.0% non-contiguous), 1183/4096 blocks
[ 1.929833@1] EXT4-fs (mmcblk0p23): Ignoring removed nomblk_io_submit option
[ 1.931755@1] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 1.932511@2] ext4 filesystem being mounted at /metadata supports timestamps until 2038 (0x7fffffff)
[ 1.949708@2] device-mapper: verity: sha1 using implementation "sha1-ce"
[ 1.956797@0] EXT4-fs (dm-5): mounted filesystem without journal. Opts: barrier=1
[ 1.967181@1] device-mapper: verity: sha1 using implementation "sha1-ce"
[ 1.973340@1] EXT4-fs (dm-6): mounted filesystem without journal. Opts: barrier=1
[ 1.976120@0] device-mapper: verity: sha1 using implementation "sha1-ce"
[ 1.982941@0] EXT4-fs (dm-7): mounted filesystem without journal. Opts: barrier=1
[ 1.985854@0] device-mapper: verity: sha1 using implementation "sha1-ce"
[ 1.991708@0] EXT4-fs (dm-8): mounted filesystem without journal. Opts: barrier=1
[ 1.994431@0] device-mapper: verity: sha1 using implementation "sha1-ce"
[ 2.000201@0] EXT4-fs (dm-9): mounted filesystem without journal. Opts: barrier=1
[ 2.011616@1] e2fsck: executing /system/bin/e2fsck failed: No such file or directory
[ 2.012293@0] e2fsck: e2fsck terminated by exit(255)
[ 2.012293@0]
[ 2.013884@0] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
[ 2.015120@1] EXT4-fs (mmcblk0p16): mounted filesystem without journal. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 2.043476@1] printk: init: 142 output lines suppressed due to ratelimiting
[ 2.170674@3] init: Loading SELinux policy
[ 2.202095@1] SELinux: Class anon_inode not defined in policy.
[ 2.202162@3] SELinux: the above unknown classes and permissions will be denied
[ 2.203167@3] SELinux: policy capability network_peer_controls=1
[ 2.203847@3] SELinux: policy capability open_perms=1
[ 2.204496@3] SELinux: policy capability extended_socket_class=1
[ 2.205265@3] SELinux: policy capability always_check_network=0
[ 2.206025@3] SELinux: policy capability cgroup_seclabel=0
[ 2.206738@3] SELinux: policy capability nnp_nosuid_transition=1
[ 2.324496@3] audit: type=1403 audit(1646492488.980:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 2.324745@3] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
[ 2.326025@0] selinux:
[ 2.334882@0] selinux: SELinux: Loaded file_contexts
[ 2.334924@1] selinux:
[ 2.368251@1] init: init second stage started!
[ 2.403466@1] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.410544@1] init: Overriding previous 'ro.' property 'persist.sys.usb.config':'adb' with new value 'mtp'
[ 2.414175@1] init: Do not have permissions to set 'ro.vendor.autoconnectbt.nameprefix?' to 'Amlogic_RC' in property file '/vendor/build.prop': Illegal property name
[ 2.417862@1] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 2.419679@1] init: Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set
[ 2.421740@1] init: Setting product property ro.product.brand to 'Amlogic' (from ro.product.product.brand)
[ 2.422293@1] init: Setting product property ro.product.device to 'ah224' (from ro.product.product.device)
[ 2.423530@1] init: Setting product property ro.product.manufacturer to 'Amlogic' (from ro.product.product.manufacturer)
[ 2.424867@1] init: Setting product property ro.product.model to 'TranSpeed X4S' (from ro.product.product.model)
[ 2.459602@1] audit: type=1400 audit(1646492489.116:3): avc: denied { getattr } for pid=1 comm="init" path="/sbin/su" dev="dm-5" ino=48 scontext=u:r:init:s0 tcontext=u:object_r:su_exec:s0 tclass=file permissive=1
[ 2.546727@3] cgroup1: Unknown subsys name 'blkio'
[ 2.580774@2] cgroup1: Unknown subsys name 'schedtune'
[ 2.630806@0] audit: type=1400 audit(1646492489.288:4): avc: denied { write } for pid=1 comm="init" name="parameters" dev="sysfs" ino=8283 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 2.632522@3] audit: type=1400 audit(1646492489.288:5): avc: denied { add_name } for pid=1 comm="init" name="prefetch_cluster" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 2.634797@3] audit: type=1400 audit(1646492489.288:6): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 2.672318@3] audit: type=1400 audit(1646492489.328:7): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 2.706122@2] ueventd: ueventd started!
[ 2.709911@3] selinux: SELinux: Loaded file_contexts
[ 2.709952@3] selinux:
[ 2.710496@3] ueventd: Parsing file /system/etc/ueventd.rc...
[ 2.712143@3] ueventd: Parsing file /vendor/ueventd.rc...
[ 2.713675@3] ueventd: Parsing file /odm/ueventd.rc...
[ 2.713754@3] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 2.714986@3] ueventd: Parsing file /ueventd.amlogic.rc...
[ 2.715617@3] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
[ 2.738631@3] apexd: This device does not support updatable APEX. Exiting
[ 2.746059@2] synth uevent: /devices/platform/fe084040.ir/input/input3: failed to send uevent
[ 2.746859@3] input input3: uevent: failed to send synthetic uevent
[ 2.839993@3] hdr10_tmo_alg: disagrees about version of symbol module_layout
[ 2.840209@1] hdr10_tmo_alg: module license 'unspecified' taints kernel.
[ 2.841038@1] Disabling lock debugging due to kernel taint
[ 2.841923@1] hdr10_tmo_alg: disagrees about version of symbol param_ops_uint
[ 2.843022@1] load module: hdr10_tmo_alg
[ 2.843137@1] hdr10_tmo_alg: hdr10_tmo_alg_driver_init insmod ok. v1.0_2020-12-24
[ 2.853918@1] load module: optee
[ 2.871289@1] load module: optee_armtz
[ 2.886543@1] checking watermark status return 0xFFFFFFFF
[ 2.886587@1] optee_armtz: initialized driver
[ 3.394371@1] hdmitx: hdmitx_aud_hpd_plug_handler state:0
[ 4.242359@0] lcd vlock_en=0, vlock_mode=0x8
[ 5.236650@1] ueventd: Coldboot took 2.518 seconds
[ 5.327838@3] Registered swp emulation handler
[ 5.363980@3] emmc_key_read:439, read ok
[ 5.364021@3] unifykey: mark is not found
[ 5.373923@3] logd.auditd: start
[ 5.373986@1] logd.klogd: 5371647627
console:/ # [ 5.378832@1] init: wait for '/odm/lib/ms12' took 0ms
[ 5.399359@2] init: wait for '/dev/dolby_fw' took 0ms
[ 5.402723@0] load module: aml_chcon
[ 5.410665@0] type=1400 audit(1646492492.060:8): avc: denied { create } for comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
DEVICE_MVN=0x0
[ 5.472614@1] load module: media_clock
[ 5.472987@1] No find node.
[ 5.473003@1] vdec init cpu id: 0x32(0)
[ 5.473010@1] register clk_set_setting cpu[50]
[ 5.476849@1] load module: firmware
[ 5.477258@1] Registered firmware driver success.
[ 5.478885@0] Try to load video/h264_enc.bin ...
[ 5.481626@0] load firmware size : 76288, Name : video/h264_enc.bin.
[ 5.482641@0] Try to load video/video_ucode.bin ...
[ 5.496527@0] load firmware size : 1804032, Name : video/video_ucode.bin.
[ 5.502567@2] load module: video_framerate_adapter
[ 5.502833@2] Registered frame rate driver success.
[ 5.515963@2] load module: decoder_common
[ 5.517537@1] vdec vdec: Get pwrc-vdec-2 failed, pm-domain: 0
[ 5.517681@1] vdec vdec: Get pwrc-hevc-b failed, pm-domain: 0
[ 5.518301@1] vdec vdec: Get pwrc-wave failed, pm-domain: 0
[ 5.519061@1] vdec power init success!
[ 5.519826@1] Can not create debugfs for vdec_profile
[ 5.530840@1] load module: stream_input
[ 5.531262@1] Amlogic A/V streaming port init
[ 5.533599@1] no need to register_tync_func.
[ 5.533628@1] no need to register_tync_func.
[ 5.533990@1] no need to register_tync_func.
[ 5.534597@1] no need to register_tync_func.
[ 5.535078@1] no need to register_tync_func.
[ 5.535616@1] no need to register_tync_func.
[ 5.536157@1] no need to register_tync_func.
[ 5.536700@1] no need to register_tync_func.
[ 5.537240@1] no need to register_tync_func.
[ 5.537805@1] get gate demux control failed 0000000000000000
[ 5.538525@1] get gate parser_top control failed 0000000000000000
[ 5.539283@1] get gate vdec control ok ffffff80c346ca80
[ 5.539930@1] get gate clk_81 control failed 0000000000000000
[ 5.540659@1] get gate clk_vdec_mux control ok ffffff80c346cb80
[ 5.541404@1] get gate clk_hcodec_mux control ok ffffff80c346cc80
[ 5.542171@1] get gate clk_hevc_mux control failed 0000000000000000
[ 5.542997@1] get gate clk_hevcb_mux control ok ffffff80c346cd80
[ 5.543725@1] get gate ahbarb0 control failed 0000000000000000
[ 5.544458@1] get gate asyncfifo control failed 0000000000000000
[ 5.545219@1] get gate clk_hevcf_mux control ok ffffff80c346ce80
[ 5.545974@1] get mux clk err.
[ 5.546379@1] get mux clk err.
[ 5.546753@1] get mux clk err.
[ 5.547142@1] get mux clk err.
[ 5.547532@1] get mux clk err.
[ 5.547922@1] get mux clk err.
[ 5.578555@1] tune2fs: tune2fs 1.45.4 (23-Sep-2019)
[ 5.581006@2] tune2fs: Cannot enable project quota; inode size too small.
[ 5.581842@0] tune2fs: tune2fs terminated by exit(1)
[ 5.581842@0]
[ 5.599133@0] e2fsck: e2fsck 1.45.4 (23-Sep-2019)
[ 5.602659@0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 5.603946@0] e2fsck: Pass 2: Checking directory structure
[ 5.604857@0] e2fsck: Pass 3: Checking directory connectivity
[ 5.604959@0] e2fsck: Pass 4: Checking reference counts
[ 5.605570@0] e2fsck: Pass 5: Checking group summary information
[ 5.609752@0] e2fsck: /dev/block/param: 16/4096 files (6.3% non-contiguous), 1414/4096 blocks
[ 5.613090@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
[ 5.614797@1] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 5.615983@1] ext4 filesystem being mounted at /mnt/vendor/param supports timestamps until 2038 (0x7fffffff)
[ 5.647476@1] EXT4-fs (mmcblk0p9): Ignoring removed nomblk_io_submit option
[ 5.649065@1] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 5.650114@1] ext4 filesystem being mounted at /mnt/vendor/tee supports timestamps until 2038 (0x7fffffff)
[ 5.669552@1] type=1107 audit(1646492492.324:9): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=ro.crypto.fuse_sdcard pid=211 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service permissive=1'
[ 5.778929@2] type=1400 audit(1646492492.432:10): avc: denied { search } for comm="android.hardwar" name="gsi" dev="mmcblk0p23" ino=20 scontext=u:r:hal_bootctl_default:s0 tcontext=u:object_r:gsi_metadata_file:s0 tclass=dir permissive=1
[ 5.782909@1] wait_for_keymaster: Waiting for Keymaster device
[ 5.788670@0] HidlServiceManagement: getService: Trying again for android.hardware.keymaster@4.0::IKeymasterDevice/default...
[ 5.833181@2] wait_for_keymaster: List of Keymaster HALs found:
[ 5.833486@0] wait_for_keymaster: Keymaster HAL #1: AmlogicKeymaster from Google SecurityLevel: TRUSTED_ENVIRONMENT HAL: android.hardware.keymaster@4.1::IKeymasterDevice/default
[ 5.837272@0] wait_for_keymaster: Using AmlogicKeymaster from Google for encryption. Security level: TRUSTED_ENVIRONMENT, HAL: android.hardware.keymaster@4.1::IKeymasterDevice/default
[ 5.838691@0] wait_for_keymaster: Keymaster device ready
[ 5.845502@0] EXT4-fs (mmcblk0p29): Ignoring removed nomblk_io_submit option
[ 5.845716@2] EXT4-fs (mmcblk0p29): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 5.851110@2] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 5.920913@1] EXT4-fs (mmcblk0p29): Ignoring removed nomblk_io_submit option
[ 5.921133@1] EXT4-fs (mmcblk0p29): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 5.926362@1] EXT4-fs (mmcblk0p29): mounting with "discard" option, but the device does not support discard
[ 5.926907@2] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: discard,nodelalloc,nomblk_io_submit,errors=continue
[ 5.946916@2] type=1400 audit(1646492492.604:11): avc: denied { create } for comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 5.950366@0] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 5.950808@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 5.951929@1] [TEE] E/TC:? 00 tee_rpmb_init:1140 Verify key failed!
[ 5.952720@1] [TEE] E/TC:? 00 tee_rpmb_init:1141 Make sure key here matches device key
[ 5.953716@1] [TEE] M/TA: KeymasterTA (info): app/ipc/keymaster_ipc.cpp, Line 963: Amlogic KEYMASTER 4.1! Build Time: Mar 23 2021 07:55:15 version: 5796a19 TDK: 03c1a0c
[ 6.004064@1] apexd: This device does not support updatable APEX. Exiting
[ 6.004255@0] apexd: Marking APEXd as activated
[ 6.163828@0] apexd: This device does not support updatable APEX. Exiting
[ 6.164020@0] apexd: Marking APEXd as ready
[ 6.205480@0] load module: mali_kbase
[ 6.205772@1] mali fe400000.bifrost: Kernel DDK version r25p0-01rel0
[ 6.206140@1] mali fe400000.bifrost: max pp is 2
[ 6.206717@1] mali fe400000.bifrost: set min pp to default 1
[ 6.207362@1] mali fe400000.bifrost: min pp is 1
[ 6.207946@1] mali fe400000.bifrost: set min clk default to 0
[ 6.208669@1] mali fe400000.bifrost: min clk is 0
[ 6.209302@1] mali fe400000.bifrost: hiu io source 0x0000000047277c3f
[ 6.210107@1] mali fe400000.bifrost: aobus base 0x00000000ecf8bc2e
[ 6.210902@1] mali fe400000.bifrost: reset bus 0x000000007e039c37
[ 6.211650@1] mali fe400000.bifrost: clk cntl reg = 0x0
[ 6.212310@1] mali fe400000.bifrost: num of pp used most of time 1
[ 6.213089@1] mali fe400000.bifrost: clock dvfs cfg table size is 6
[ 6.213888@1] mali fe400000.bifrost: no reset_cfg
[ 6.214492@1] mali fe400000.bifrost: no apb_reset
[ 6.215085@1] mali fe400000.bifrost: max clk set 4
[ 6.215678@1] mali fe400000.bifrost: max clk is 4
[ 6.216286@1] mali fe400000.bifrost: turbo clk set to 5
[ 6.216948@1] mali fe400000.bifrost: turbo clk is 5
[ 6.217577@1] mali fe400000.bifrost: default clk set to 4
[ 6.218257@1] mali fe400000.bifrost: default clk is 4
[ 6.218954@1] mali fe400000.bifrost: ====================0====================
[ 6.218954@1] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<0 76>, clk_sample=285
[ 6.221145@1] mali fe400000.bifrost: ====================1====================
[ 6.221145@1] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<80 120>, clk_sample=400
[ 6.223419@1] mali fe400000.bifrost: ====================2====================
[ 6.223419@1] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<80 120>, clk_sample=500
[ 6.225649@1] mali fe400000.bifrost: ====================3====================
[ 6.225649@1] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<80 120>, clk_sample=666
[ 6.227957@1] mali fe400000.bifrost: ====================4====================
[ 6.227957@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<80 255>, clk_sample=846
[ 6.230156@1] mali fe400000.bifrost: ====================5====================
[ 6.230156@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<80 255>, clk_sample=846
[ 6.232427@1] mali fe400000.bifrost: clock dvfs table size is 6
[ 6.233172@1] kernel version >= 5.4
[ 6.250382@1] gpu cooling register okay with err=0
[ 6.250553@1] gpu core cooling register okay with err=0
[ 6.250968@1] mali fe400000.bifrost: kbase_device_runtime_init
[ 6.251703@1] mali fe400000.bifrost: pm_callback_runtime_on
[ 6.252403@1] mali fe400000.bifrost: pm_runtime_get_sync ret=0
[ 6.253140@1] mali fe400000.bifrost: pm_runtime enabled
[ 6.253813@1] mali fe400000.bifrost: shader_present=1, tiler_present=1, l2_present=1
[ 6.255002@1] mali fe400000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
[ 6.255802@1] mali fe400000.bifrost: No memory group manager is configured
[ 6.257595@1] mali fe400000.bifrost: Probed as mali0
[ 6.366109@1] load module: aml_aucpu
[ 6.371436@1] AUCPU sequence no updated
[ 6.373533@1] Amlogic Aucpu driver installed
[ 6.381068@1] load module: dvb_demux
[ 6.381102@2] aml dvb init
[ 6.382372@1] aucpu trace orig 0x0 now 0xdeadface
[ 6.382381@1] --stage value 57005 line 64206
[ 6.382827@1] aucpu trace error orig 0x0 now 0xdeadface
[ 6.382829@1] --Err value 57005 line 64206
[ 6.385585@1] ci: disagrees about version of symbol aml_get_dvb_adapter
[ 6.386989@0] load module: ci
[ 6.387013@0] Amlogic CI mode init
[ 6.389487@0] init: Top-level directory needs encryption action, eg mkdir /data/media <mode> <uid> <gid> encryption=Require
[ 6.390219@1] init: Not setting encryption policy on: /data/media
[ 6.391611@1] type=1400 audit(1646492493.048:12): avc: denied { getattr } for comm="init" path="/data/media" dev="mmcblk0p29" ino=857641 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[ 6.450702@0] logd.daemon: reinit
[ 6.466314@0] type=1400 audit(1646492493.120:13): avc: denied { create } for comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 6.480583@1] file system registered
[ 6.485023@2] using random self ethernet address
[ 6.485058@2] using random host ethernet address
[ 6.492113@2] assign_ffs_buffer FFS_BUFFER_MAX=256!!!
[ 6.496671@2] assign_ffs_buffer FFS_BUFFER_MAX=256!!!
[ 6.498956@2] assign_ffs_buffer FFS_BUFFER_MAX=256!!!
[ 6.512118@2] load module: amvdec_mh264
[ 6.512152@2] ammvdec_h264 module init
[ 6.520218@2] load module: amvdec_mh264_v4l
[ 6.520255@2] ammvdec_h264 module init
[ 6.524466@2] load module: amvdec_h264mvc
[ 6.532242@2] load module: amvdec_h265
[ 6.540379@2] load module: amvdec_h265_v4l
[ 6.544028@2] load module: amvdec_mmjpeg
[ 6.547466@0] load module: amvdec_mmjpeg_v4l
[ 6.551774@0] load module: amvdec_mmpeg12
[ 6.551808@0] ammvdec_mpeg12 module init
[ 6.556129@0] load module: amvdec_mmpeg12_v4l
[ 6.556163@0] ammvdec_mpeg12 module init
[ 6.560272@0] load module: amvdec_mmpeg4
[ 6.560308@0] ammvdec_mpeg4_driver_init_module
[ 6.565568@0] load module: amvdec_mmpeg4_v4l
[ 6.565605@0] ammvdec_mpeg4_driver_init_module
[ 6.569223@0] load module: amvdec_vc1
[ 6.576487@0] load module: amvdec_vp9
[ 6.583867@1] load module: amvdec_vp9_v4l
[ 6.590724@1] load module: amvdec_avs2
[ 6.596104@1] load module: encoder
[ 6.596467@1] amvenc_avc_probe -- reserved memory config fail.
[ 6.596589@1] amvenc_avc - cma memory pool size: 60 MB
[ 6.597373@1] hcodec_clk_a: 666 MHz
[ 6.597708@1] encode_wq_init.
[ 6.598073@1] encode start monitor.
[ 6.598722@1] encode workqueue monitor start.
[ 6.603109@0] load module: vpu
[ 6.603138@1] vpu_init
[ 6.603480@1] vpu_probe, clock_a: 0, clock_b: 0, clock_c: 0
[ 6.603822@1] HevcEnc reserved memory config fail.
[ 6.604424@1] HevcEnc - cma memory pool size: 64 MB
[ 6.605060@1] HevcEnc - wave420l_irq: 56
[ 6.605842@1] wave_clk_a: 666 MHz
[ 6.605962@1] wave_clk_b: 399 MHz
[ 6.606427@1] wave_clk_c: 399 MHz
[ 6.606857@1] vpu base address get from platform driver
[ 6.606859@1] physical base addr=0xfe310000, virtual base=0xffffffc012580000
[ 6.608742@1] SUCCESS alloc_chrdev_region
[ 6.608879@1] success to probe vpu device with video memory from cma
[ 6.618623@1] load module: amvdec_ports
[ 6.618659@1] v4l dec module init
[ 6.619611@1] aml-vcodec-dec vcodec_dec: v4ldec registered as /dev/video26
[ 6.621720@1] amlogic_fbc_lib: disagrees about version of symbol module_layout
[ 6.622256@1] amlogic_fbc_lib: disagrees about version of symbol register_amlogic_afbc_dec_fun
[ 6.623517@1] load module: amlogic_fbc_lib
[ 6.623550@1] register_amlogic_afbc_dec_fun
[ 6.624074@1] register_amlogic_afbc_dec_fun
[ 6.628630@1] load module: amvdec_mavs
[ 6.636748@1] load module: amvdec_av1
[ 6.644702@1] load module: amvdec_av1_v4l
[ 6.647437@1] load module: media_sync
[ 6.835462@1] gxbb_pm: early_suspend_state=0
[ 6.977432@2] healthd: No battery devices found
[ 7.003163@0] [DV] module not install
[ 7.003758@0] video bg color, channel(0x1108080) no_channel(0x1108080)
[ 7.020839@0] healthd: battery none chg=
[ 7.036795@1] dim:load 0xa00 pq table len 115 later.
[ 7.097935@1] map_store:rm default
[ 7.098567@3] map_store:add default decoder ppmgr deinterlace amvideo
[ 7.105041@3] [drm] hdisplay = 720
[ 7.105041@3] vdisplay = 576
[ 7.105041@3] vrefresh = 50
[ 7.311370@2] video_composer_open iminor(inode) =0
[ 7.312001@2] video_composer_open iminor(inode) =1
[ 7.313491@2] [drm] hdisplay = 720
[ 7.313491@2] vdisplay = 576
[ 7.313491@2] vrefresh = 50
[ 7.314989@2] [drm] hdisplay = 720
[ 7.314989@2] vdisplay = 576
[ 7.314989@2] vrefresh = 50
[ 7.341886@2] hdmitx: system: sname = invalid
[ 7.342071@0] hdmitx: system: char_clk = 0
[ 7.342273@0] hdmitx: system: cd = 4
[ 7.342785@0] hdmitx: system: cs = 0
[ 7.355361@0] hdmitx: system: set hdcp_pwr 1
[ 7.505981@2] init: Could not start service 'vendor_flash_recovery' as part of class 'main': Cannot find '/vendor/bin/install-recovery.sh': No such file or directory
[ 7.597829@2] hdmitx: system: restore hdcp_pwr 0
[ 7.668806@1] hdmitx: avmute_store -1
[ 7.668843@0] hdmitx: hw: avmute set to 1
[ 7.781664@0] selinux: SELinux: Could not get canonical path for /sys/kernel/dmabuf/buffers/16629/attachments restorecon: No such file or directory.
[ 7.782823@2] selinux:
[ 7.785605@2] ueventd: selinux_android_restorecon(/sys/kernel/dmabuf/buffers/16629/attachments) failed: No such file or directory
[ 7.964901@2] avc open
[ 7.964933@3] amvenc_avc check CMA pool success, max instance: 3.
[ 7.968972@3] allocating phys 0xcd800000, size 20480k, wq:00000000f5b8f1aa.
[ 7.969169@3] amvenc_avc memory config success, buff start:0xcd800000, size is 0x1400000, wq:00000000f5b8f1aa.
[ 7.970639@3] avc release, wq:00000000f5b8f1aa
[ 7.970998@3] remove encode_work_queue 00000000f5b8f1aa success, _destroy_encode_work_queue line 3925.
[ 7.972668@3] [+] vpu_open, open_count=0
[ 7.972695@3] vpu_open, calling process: 416:android.hardwar
[ 7.986471@3] allocating phys 0xcd800000, virt addr 0x0, size 65536k
[ 7.987019@3] consider using reset control
[ 7.987114@3] [-] vpu_open, ret: 0
[ 7.987686@3] vpu_release, calling process: 416:android.hardwar
[ 7.987693@3] selinux: SELinux: Could not set context for /sys/devices/virtual/net/ipsec_test/statistics/tx_errors: No such file or directory
[ 7.988289@2] vpu_release, ret = 0
[ 7.988293@3] vpu_free_buffers
[ 7.990626@3] selinux:
[ 7.993264@2] selinux: SELinux: Could not set context for /sys/devices/virtual/net/ipsec_test/statistics/rx_length_errors: No such file or directory
[ 7.994281@2] selinux:
[ 7.995584@2] selinux: SELinux: Could not set context for /sys/devices/virtual/net/ipsec_test/statistics/rx_packets: No such file or directory
[ 7.996842@2] selinux:
[ 7.997315@2] selinux: SELinux: Could not set context for /sys/devices/virtual/net/ipsec_test/statistics/tx_carrier_errors: No such file or directory
[ 7.998362@2] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 7.999651@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 8.000795@1] [TEE] E/TC:? 00 tee_rpmb_init:1140 Verify key failed!
[ 8.001563@1] [TEE] E/TC:? 00 tee_rpmb_init:1141 Make sure key here matches device key
[ 8.002371@1] vpu_free_instances
[ 8.002566@1] [TEE] E/TA: fw_check_pack_version:232 the package has 108 fws totally.
[ 8.002972@3] vpu_release, decrease open_count from 1
[ 8.003968@3] [TEE] E/TA: fw_check_pack_version:247 The TA version (v0.2) is lower than the pkg version (v0.3).
[ 8.004609@1] vpu_release: s_interrupt_flag(0), reason(0x00000000)
[ 8.005896@3] [TEE] E/TA: fw_check_pack_version:248 The TA version is too low that may affect the work please update asap.
[ 8.008084@1] [TEE] E/TA: fw_check_pack_version:251 The TA ver is v0.2
[ 8.008928@1] [TEE] E/TA: fw_check_pack_version:252 The fw ver is v0.3
[ 8.009772@1] [TEE] E/TA: fw_data_insert:326 the fw with 520 KB will be loaded.
[ 8.010724@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 8.011042@1] vpu_release, s_video_memory 0xcd800000
[ 8.011845@3] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 8.013597@1] [TEE] E/TC:? 00 tee_rpmb_init:1140 Verify key failed!
[ 8.014396@1] [TEE] E/TC:? 00 tee_rpmb_init:1141 Make sure key here matches device key
[ 8.015386@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 8.016511@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 8.017638@1] [TEE] E/TC:? 00 tee_rpmb_init:1140 Verify key failed!
[ 8.018440@1] [TEE] E/TC:? 00 tee_rpmb_init:1141 Make sure key here matches device key
[ 8.019427@1] [TEE] E/TC:? 00
[ 8.019815@1] [TEE] E/TC:? 00 TA panicked with code 0xffff000f
[ 8.020552@1] [TEE] E/LD: Status of TA ff2a4bea-ef6d-11e6-89cc-d4ae52a7b3b3
[ 8.021451@1] [TEE] E/LD: arch: arm
[ 8.021928@1] [TEE] E/LD: region 0: va 0x00103000 pa 0x05414000 size 0x002000 flags rw-s (ldelf)
[ 8.023089@1] [TEE] E/LD: region 1: va 0x00105000 pa 0x05416000 size 0x005000 flags r-xs (ldelf)
[ 8.024207@1] [TEE] E/LD: region 2: va 0x0010a000 pa 0x0541b000 size 0x001000 flags rw-s (ldelf)
[ 8.025341@1] [TEE] E/LD: region 3: va 0x0010b000 pa 0x0541c000 size 0x003000 flags rw-s (ldelf)
[ 8.026494@1] [TEE] E/LD: region 4: va 0x0010e000 pa 0x0542d000 size 0x001000 flags r--s
[ 8.027530@1] [TEE] E/LD: region 5: va 0x0010f000 pa 0x0541f000 size 0x005000 flags rw-s (stack)
[ 8.028667@1] [TEE] E/LD: region 6: va 0x00159000 pa 0x00001000 size 0x00c000 flags r-xs [0]
[ 8.029761@1] [TEE] E/LD: region 7: va 0x00165000 pa 0x0000d000 size 0x024000 flags rw-s [0]
[ 8.030870@1] [TEE] E/LD: [0] ff2a4bea-ef6d-11e6-89cc-d4ae52a7b3b3 @ 0x00159000
[ 8.031811@1] [TEE] E/LD: Call stack:
[ 8.032294@1] [TEE] E/LD: 0x0015dc28
[ 8.032782@1] [TEE] E/LD: 0x0015b77d
[ 8.033271@1] [TEE] E/LD: 0x0015918d
[ 8.033757@1] [TEE] E/LD: 0x0015992b
[ 8.034244@1] [TEE] E/LD: 0x00000000
[ 8.194105@1] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1
[ 8.204725@0] aml_T9015_audio_set_bias_level
[ 8.204809@1] aml_T9015_audio_set_bias_level
[ 9.562175@2] [drm] am_meson_free_logo_memory, free memory: addr:0x0x000000007f800000,size:0x800000
[ 10.876146@2] type=1400 audit(1646492497.532:49): avc: denied { execute } for comm="system_server" name="idmap2" dev="dm-5" ino=1027 scontext=u:r:system_server:s0 tcontext=u:object_r:idmap_exec:s0 tclass=file permissive=1
[ 10.884730@3] type=1400 audit(1646492497.540:50): avc: denied { read open } for comm="system_server" path="/system/bin/idmap2" dev="dm-5" ino=1027 scontext=u:r:system_server:s0 tcontext=u:object_r:idmap_exec:s0 tclass=file permissive=1
[ 10.887176@1] type=1400 audit(1646492497.540:51): avc: denied { execute_no_trans } for comm="system_server" path="/system/bin/idmap2" dev="dm-5" ino=1027 scontext=u:r:system_server:s0 tcontext=u:object_r:idmap_exec:s0 tclass=file permissive=1
[ 10.893236@1] type=1400 audit(1646492497.548:52): avc: denied { map } for comm="idmap2" path="/system/bin/idmap2" dev="dm-5" ino=1027 scontext=u:r:system_server:s0 tcontext=u:object_r:idmap_exec:s0 tclass=file permissive=1
[ 10.895782@1] type=1400 audit(1646492497.552:53): avc: denied { getattr } for comm="idmap2" path="/system/bin/idmap2" dev="dm-5" ino=1027 scontext=u:r:system_server:s0 tcontext=u:object_r:idmap_exec:s0 tclass=file permissive=1
[ 12.846301@1] type=1400 audit(1646492499.500:54): avc: denied { read } for comm="vfdsrv" name="time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 12.853176@2] type=1400 audit(1646492499.500:55): avc: denied { open } for comm="vfdsrv" path="/sys/module/aml_fd655/parameters/time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 15.039668@2] healthd: battery none chg=
[ 15.298485@1] type=1400 audit(1646492501.948:56): avc: denied { read } for comm="Binder:534_5" name="hctosys" dev="sysfs" ino=31414 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 15.300432@1] type=1400 audit(1646492501.948:57): avc: denied { open } for comm="Binder:534_5" path="/sys/devices/platform/fe010288.rtc/rtc/rtc0/hctosys" dev="sysfs" ino=31414 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 16.853779@1] type=1400 audit(1646492503.508:58): avc: denied { read } for comm="vfdsrv" name="time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 16.857326@3] type=1400 audit(1646492503.508:59): avc: denied { open } for comm="vfdsrv" path="/sys/module/aml_fd655/parameters/time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 16.892905@3] [RX]-cec cfg = 2
[ 17.382424@2] custrom_internal_config
[ 17.383111@0] set phy setup_amp = 2
[ 17.383260@0] meson8b-dwmac fdc00000.ethernet eth0: PHY [0.1:08] driver [Meson G12A Internal PHY]
[ 17.394436@0] meson8b-dwmac fdc00000.ethernet eth0: No Safety Features support found
[ 17.394739@0] meson8b-dwmac fdc00000.ethernet eth0: PTP not supported by HW
[ 17.395610@0] meson8b-dwmac fdc00000.ethernet eth0: configuring for phy/rmii link mode
[ 17.407758@0] type=1400 audit(1646492504.064:60): avc: denied { read } for comm="wifi@1.0-servic" name="version" dev="proc" ino=4026532011 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:proc_version:s0 tclass=file permissive=1
[ 17.409830@3] type=1400 audit(1646492504.064:61): avc: denied { open } for comm="wifi@1.0-servic" path="/proc/version" dev="proc" ino=4026532011 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:proc_version:s0 tclass=file permissive=1
[ 17.409991@0] aml_wifi aml_wifi: [pci_remove] pci remove!
[ 17.533938@0] type=1400 audit(1646492504.188:62): avc: denied { create } for comm="main" name="cgroup.procs" scontext=u:r:zygote:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 17.618434@1] aml_wifi aml_wifi: [usb_power_control] Set WiFi power down
[ 17.618616@0] aml_wifi aml_wifi: [usb_power_control] Set WiFi power on !
[ 17.779285@0] resman: 2 appname:secmem, type=3
[ 17.801567@1] selinux: SELinux: Could not get canonical path for /sys/kernel/dmabuf/buffers/17942/attachments restorecon: No such file or directory.
[ 17.802991@1] selinux:
[ 17.803069@1] ueventd: selinux_android_restorecon(/sys/kernel/dmabuf/buffers/17942/attachments) failed: No such file or directory
[ 17.820382@1] resman: 3 appname:OMX-0, type=0
[ 17.827349@0] meson-gx-mmc fe088000.sdio: 52 [0xc00], TIMEOUT[0x2800]
[ 17.829126@0] meson-gx-mmc fe088000.sdio: 52 [0x80000c08], TIMEOUT[0x2800]
[ 17.834813@0] type=1400 audit(1646492504.488:63): avc: denied { add_name } for comm="Binder:411_5" name="globalAlert" scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=dir permissive=1
[ 17.836021@1] meson-gx-mmc fe088000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 17.837493@0] type=1400 audit(1646492504.488:64): avc: denied { associate } for comm="Binder:411_5" name="globalAlert" scontext=u:object_r:proc_net:s0 tcontext=u:object_r:proc:s0 tclass=filesystem permissive=1
[ 17.883125@1] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 17.888973@0] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
[ 17.893384@0] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 17.900834@0] resman: 4 appname:OMX-1, type=0
[ 17.904352@0] mmc2: queuing unknown CIS tuple 0x80 (19 bytes)
[ 17.960676@0] resman: 5 appname:OMX-2, type=0
[ 17.992945@3] type=1400 audit(1646492504.648:65): avc: denied { create } for comm="main" name="cgroup.procs" scontext=u:r:zygote:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 18.010308@3] Data 1 aligned delay is 0
[ 18.010396@0] mmc2: clk 99999999 div 10 tuning start
[ 18.015490@0] mmc2: adj_win: < 1 2 3 4 5 6 7 8 9 >
[ 18.015525@0] mmc2: best_s = 1, best_sz = 9
[ 18.016027@0] mmc2: clk= 0x1000020a, adj = 0x52000, dly1 = 0, dly2 = 0
[ 18.026270@0] mmc2: new ultra high speed SDR50 SDIO card at address 0001
[ 18.026916@0] mmc2: clock 99999999, 4-bit-bus-width
[ 18.026916@0]
[ 18.034169@3] resman: 6 appname:OMX-3, type=0
[ 18.035029@3] [sdio_reinit] finish
[ 18.035413@0] aml_wifi aml_wifi: [usb_power_control] Set WiFi power on !
[ 18.036162@0] aml_wifi aml_wifi: [pci_reinit] pci wifi reinit!
[ 18.036897@0] aml_wifi aml_wifi: [wifi_power_ioctl] Set sdio wifi power up!
[ 18.039544@0] type=1400 audit(1646492504.696:66): avc: denied { search } for comm="wifi@1.0-servic" name="wifi" dev="mmcblk0p29" ino=555449 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
[ 18.061053@3] type=1400 audit(1646492504.696:67): avc: denied { write } for comm="wifi@1.0-servic" name="wifi" dev="mmcblk0p29" ino=555449 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
[ 18.114057@3] load module: dhd
[ 18.114094@2] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.10 (r826445-20200521-1)
[ 18.115124@2] [dhd] ======== dhd_wlan_init_plat_data ========
[ 18.115662@2] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 18.116311@2] [dhd] dhd_wifi_platform_load: Enter
[ 18.116958@2] [dhd] Power-up adapter 'DHD generic adapter'
[ 18.117578@2] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 18.118458@2] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 18.119954@2] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Disable! 481
[ 18.270353@2] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 18.270802@1] [TEE] E/TC:? 00 tee_rpmb_verify_key_sync_counter:967 Verify key returning 0xffff000f
[ 18.271921@1] [TEE] E/TC:? 00 tee_rpmb_init:1140 Verify key failed!
[ 18.272711@1] [TEE] E/TC:? 00 tee_rpmb_init:1141 Make sure key here matches device key
[ 18.273708@1] [TEE] E/TA: TA_CreateEntryPoint:410 SECMEM 2.1.7-geb69005(build:1272)
[ 18.337988@1] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Enable! 481
[ 18.348046@2] resman: 7 appname:OMX-4, type=0
[ 18.363157@0] mediasync_ins_alloc index:0
[ 18.366011@0] disalbe fastplay
[ 18.369480@3] resman: 8 appname:OMX-5, type=0
[ 18.373457@3] mediasync_ins_alloc index:0
[ 18.374727@0] disalbe fastplay
[ 18.378858@0] resman: 9 appname:OMX-6, type=0
[ 18.382590@0] mediasync_ins_alloc index:0
[ 18.383731@3] disalbe fastplay
[ 18.388745@3] resman: 10 appname:OMX-7, type=0
[ 18.392533@3] mediasync_ins_alloc index:0
[ 18.394685@0] disalbe fastplay
[ 18.397982@0] resman: 11 appname:OMX-8, type=0
[ 18.401790@0] mediasync_ins_alloc index:0
[ 18.405467@0] disalbe fastplay
[ 18.427515@0] resman: 12 appname:OMX-9, type=0
[ 18.440753@0] resman: 13 appname:OMX-10, type=0
[ 18.459168@0] resman: 14 appname:OMX-11, type=0
[ 18.463577@0] mediasync_ins_alloc index:0
[ 18.467794@1] disalbe fastplay
[ 18.474808@1] resman: 15 appname:OMX-12, type=0
[ 18.479789@0] mediasync_ins_alloc index:0
[ 18.480945@0] disalbe fastplay
[ 18.497912@0] resman: 16 appname:OMX-13, type=0
[ 18.504423@0] mediasync_ins_alloc index:0
[ 18.506811@0] disalbe fastplay
[ 18.510191@0] resman: 17 appname:OMX-14, type=0
[ 18.515095@1] mediasync_ins_alloc index:0
[ 18.516270@1] disalbe fastplay
[ 18.521410@1] resman: 18 appname:OMX-15, type=0
[ 18.527158@3] mediasync_ins_alloc index:0
[ 18.530044@3] disalbe fastplay
[ 18.538679@3] resman: 19 appname:OMX-16, type=0
[ 18.545851@3] mediasync_ins_alloc index:0
[ 18.549393@3] disalbe fastplay
[ 18.573105@3] resman: 20 appname:OMX-17, type=0
[ 18.578314@0] mediasync_ins_alloc index:0
[ 18.581376@3] disalbe fastplay
[ 18.588278@0] resman: 21 appname:OMX-18, type=0
[ 18.592851@3] mediasync_ins_alloc index:0
[ 18.594074@0] disalbe fastplay
[ 18.675898@0] resman: 22 appname:OMX-19, type=0
[ 18.679700@0] mediasync_ins_alloc index:0
[ 18.685875@0] disalbe fastplay
[ 18.694734@0] resman: 23 appname:OMX-20, type=0
[ 18.698814@1] mediasync_ins_alloc index:0
[ 18.710635@1] disalbe fastplay
[ 18.720368@1] resman: 24 appname:OMX-21, type=0
[ 18.726891@3] mediasync_ins_alloc index:0
[ 18.735576@0] disalbe fastplay
[ 18.834241@0] resman: 25 appname:OMX-22, type=0
[ 18.870411@0] [dhd] wifi_platform_bus_enumerate device present 1
[ 18.870490@3] [dhd] ======== Card detection to detect SDIO card! ========
[ 18.871339@3] sdio_reset_comm():
[ 18.879336@3] resman: 26 appname:OMX-23, type=0
[ 18.886670@3] mediasync_ins_alloc index:0
[ 18.888004@0] disalbe fastplay
[ 18.893412@0] resman: 27 appname:OMX-24, type=0
[ 18.908443@0] mediasync_ins_alloc index:0
[ 18.912441@0] disalbe fastplay
[ 18.927587@0] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 18.931340@0] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
[ 18.936443@0] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 18.952792@2] mmc2: queuing unknown CIS tuple 0x80 (19 bytes)
[ 18.959756@2] audio_dsp: dts_dec_control/0x0
[ 18.989440@2] resman: 28 appname:OMX-25, type=0
[ 19.009172@3] resman: 29 appname:OMX-26, type=0
[ 19.039542@3] resman: 30 appname:OMX-27, type=0
[ 19.083615@0] Data 1 aligned delay is 0
[ 19.083649@1] mmc2: clk 99999999 div 10 tuning start
[ 19.090173@1] audio_dsp: drc high cut scale set to 100%
[ 19.090662@1] audio_dsp: drc low boost scale set to 100%
[ 19.091280@3] audio_dsp: drc mode set to LINE
[ 19.093170@3] mmc2: adj_win: < 1 2 3 4 5 6 7 8 9 >
[ 19.093206@2] mmc2: best_s = 1, best_sz = 9
[ 19.093619@2] mmc2: clk= 0x1000020a, adj = 0x52000, dly1 = 0, dly2 = 0
[ 19.094464@2] [sdio_reinit] finish
[ 19.116474@2] [dhd] bcmsdh_register: register client driver
[ 19.116687@0] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[ 19.118050@0] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[ 19.118085@0] [dhd] bus num (host idx)=2, slot num (rca)=1
[ 19.118763@0] [dhd] found adapter info 'DHD generic adapter'
[ 19.119744@0] [dhd] sdioh_attach: set sd_f2_blocksize 256
[ 19.120217@0] [dhd] sdioh_attach: sd clock rate = 0
[ 19.121679@0] [dhd] dhdsdio_probe : no mutex held. set lock
[ 19.121823@0] [dhd] F1 signature read @0x18000000=0x16034334
[ 19.126735@0] [dhd] F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x0
[ 19.127216@0] [dhd] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[ 19.128306@0] [dhd] dhd_conf_set_chiprev : chip=0x4334, chiprev=3
[ 19.136782@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.137163@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.138623@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.139283@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.140340@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.145359@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.145758@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.147080@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.147947@0] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 19.163290@0] dhd_attach(): thread:dhd_watchdog_thread:434 started
[ 19.173642@1] dhd_attach(): thread:dhd_dpc:439 started
[ 19.176661@1] dhd_attach(): thread:dhd_rxf:43b started
[ 19.176708@1] [dhd] dhd_deferred_work_init: work queue initialized
[ 19.177410@1] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[ 19.178409@1] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x1070
[ 19.196063@1] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 19.197532@3] [dhd] Dongle Host Driver, version 100.10.545.10 (r826445-20200521-1)
[ 19.210973@3] [dhd] Register interface [wlan0] MAC: 5c:f8:a1:d1:c6:e3
[ 19.210973@3]
[ 19.212682@3] [dhd] dhd_bus_devreset: == Power OFF ==
[ 19.219007@3] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[ 19.219057@3] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[ 19.219676@3] [dhd] dhd_txglom_enable: enable 0
[ 19.220250@3] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 19.221110@3] [dhd] dhd_bus_devreset: WLAN OFF DONE
[ 19.221682@3] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[ 19.228542@0] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[ 19.228630@0] [dhd] dhd_ifname: ifidx 16 out of range
[ 19.230502@0] [dhd] <if_bad>: set cur_etheraddr failed
[ 19.230534@0] [dhd] dhd_register_if: _dhd_set_mac_address() failed
[ 19.260055@0] [dhd] Register interface [wlan1] MAC: 5e:f8:a1:d1:c6:e3
[ 19.260055@0]
[ 19.260653@3] [dhd] dhdsdio_probe : the lock is released.
[ 19.270915@3] [dhd] dhd_module_init: Exit err=0
[ 19.358121@3] [dhd] dhd_open: Enter wlan0
[ 19.358157@1] [dhd] dhd_open : no mutex held. set lock
[ 19.358656@1] [dhd]
[ 19.358656@1] Dongle Host Driver, version 100.10.545.10 (r826445-20200521-1)
[ 19.359788@1] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
[ 19.360493@1] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 19.361249@1] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 19.362008@1] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Disable! 481
[ 19.602523@1] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Enable! 481
[ 19.893128@0] selinux: SELinux: Could not get canonical path for /sys/kernel/dmabuf/buffers/17210/attachments restorecon: No such file or directory.
[ 19.894124@0] selinux:
[ 19.894538@0] ueventd: selinux_android_restorecon(/sys/kernel/dmabuf/buffers/17210/attachments) failed: No such file or directory
[ 20.154389@0] sdio_reset_comm():
[ 20.197203@3] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 20.200837@0] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
[ 20.305823@0] Data 1 aligned delay is 0
[ 20.305858@3] mmc2: clk 99999999 div 10 tuning start
[ 20.311396@3] mmc2: adj_win: < 1 2 3 4 5 6 7 8 9 >
[ 20.311435@1] mmc2: best_s = 1, best_sz = 9
[ 20.311846@1] mmc2: clk= 0x3000020a, adj = 0x52000, dly1 = 0, dly2 = 0
[ 20.312707@1] [dhd] sdioh_start: set sd_f2_blocksize 256
[ 20.313530@1] [dhd]
[ 20.313530@1]
[ 20.313530@1] dhd_bus_devreset: == Power ON ==
[ 20.314506@1] [dhd] F1 signature read @0x18000000=0x16034334
[ 20.316799@1] [dhd] F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x0
[ 20.317263@1] [dhd] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[ 20.318216@1] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 20.318642@1] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 20.320146@1] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/firmware/config.txt
[ 20.320545@1] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm4334b1_ag.bin
[ 20.321687@1] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_HS2734A.txt
[ 20.322879@1] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm4334b1_ag.blob
[ 20.324590@1] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
[ 20.326444@1] [dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm4334b1_ag.bin (457249 bytes) open success
[ 20.366563@1] [dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_HS2734A.txt (2019 bytes) open success
[ 20.368087@3] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 20.594321@3] BT_RADIO going: on
[ 20.594389@1] AML_BT: going ON,btpower_evt=0
[ 20.694785@1] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 20.695773@1] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
[ 20.696859@0] [dhd] dhd_apply_default_clm: Ignore clm file /vendor/etc/firmware/clm_bcm4334b1_ag.blob
[ 20.698586@0] [dhd] Firmware up: op_mode=0x0005, MAC=5c:f8:a1:d1:c6:e3
[ 20.698971@0] [dhd] Disable tdls_auto_op failed. -1
[ 20.700825@0] [dhd] dhd_preinit_ioctls Set scancache failed -23
[ 20.701387@3] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: -23
[ 20.703348@3] [dhd] dhd_preinit_ioctls event_msgs_ext not support or version mismatch -23
[ 20.704547@2] [dhd] dhd_wl_ioctl_set_intiovar: set int iovar arpoe failed, ERR -23
[ 20.704818@3] [dhd] dhd_arp_offload_enable: failed to enabe ARP offload to 1, retcode = -23
[ 20.706612@3] [dhd] dhd_wl_ioctl_get_intiovar: get int iovar arp_version failed, ERR -23
[ 20.707392@0] [dhd] dhd_wl_ioctl_set_intiovar: set int iovar arp_ol failed, ERR -23
[ 20.708090@3] [dhd] dhd_arp_offload_set: failed to set ARP offload mode to 0x19, retcode = -23
[ 20.712846@3] [dhd] Driver: 100.10.545.10 (r826445-20200521-1)
[ 20.712846@3] Firmware: wl0: Apr 16 2014 16:43:15 version 6.10.58 (TOB) (r470760) FWID 01-4b84a3c8
[ 20.712846@3] CLM: 5.3.4
[ 20.714917@3] [dhd] dhd_preinit_ioctls wlc_ver failed -23
[ 20.715298@3] [dhd] dhd_txglom_enable: enable 0
[ 20.715689@3] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
[ 20.717430@3] [dhd] dhd_preinit_ioctls wl ampdu_hostreorder failed -23
[ 20.718281@3] [dhd] dhd_pno_init: Support Android Location Service
[ 20.722005@3] [dhd] dhd_ndo_get_version: failed, retcode = -23
[ 20.724060@3] [dhd] dhd_wl_ioctl_get_intiovar: get int iovar wnm_bsstrans_resp failed, ERR -23
[ 20.724646@3] [dhd] failed to get wnm_bsstrans_resp
[ 20.725546@3] [dhd] failed to set WNM capabilities
[ 20.737629@3] [dhd] dhd_preinit_ioctls: Failed to get preserve log # !
[ 20.786180@2] [dhd] dhd_conf_set_country : set country CN, revision 0
[ 20.790794@3] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
[ 20.795147@3] [dhd-wlan0] wl_android_wifi_on : Success
[ 20.843731@3] [dhd] CFG80211-ERROR) __wl_update_wiphybands : error reading vhtmode (-23)
[ 20.854081@2] [dhd] dhd_open : the lock is released.
[ 20.854116@2] [dhd] dhd_open: Exit wlan0 ret=0
[ 20.854627@2] [dhd] [wlan0] tx queue started
[ 21.033848@2] capability: warning: `wpa_supplicant' uses 32-bit capabilities (legacy support in use)
[ 21.207583@2] [dhd] P2P interface registered
[ 21.207620@3] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: 0000000089330d4a, wdev->net: 0000000000000000
[ 21.215257@3] [dhd] WLC_E_IF: NO_IF set, event Ignored
[ 21.379804@1] [dhd] dhd_conf_set_country : set country US, revision -1
[ 21.384658@1] [dhd] dhd_conf_set_country : Country code: US (US/0)
[ 21.388622@2] [dhd] CFG80211-ERROR) __wl_update_wiphybands : error reading vhtmode (-23)
[ 21.412052@2] [dhd] wldev_set_country: set country for US as US rev 0
[ 22.864514@1] type=1400 audit(1646492509.520:93): avc: denied { read } for comm="vfdsrv" name="time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 22.866260@3] type=1400 audit(1646492509.520:94): avc: denied { open } for comm="vfdsrv" path="/sys/module/aml_fd655/parameters/time" dev="sysfs" ino=12027 scontext=u:r:vfdsrv:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment