-
-
Save ironicbadger/157f90960130bdb840e093501a9e2989 to your computer and use it in GitHub Desktop.
SMART reports
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
### conclusions | |
- Drive is just over 3 years old (power on time) | |
- No reallocated sectors | |
- No errors in SMART history | |
This drive is suitable for service. | |
=============================== | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Hitachi Deskstar 5K3000 | |
Device Model: Hitachi HDS5C3030ALA630 | |
Serial Number: MJ1311YNG7SAZA | |
LU WWN Device Id: 5 000cca 228c38644 | |
Firmware Version: MEAOA800 | |
User Capacity: 3,000,592,982,016 bytes [3.00 TB] | |
Sector Size: 512 bytes logical/physical | |
Rotation Rate: 5700 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) | |
Local Time is: Wed Aug 1 19:07:03 2018 BST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x80) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (34570) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 576) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 1 | |
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 105 | |
3 Spin_Up_Time 0x0007 163 163 024 Pre-fail Always - 516 (Average 340) | |
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 618 | |
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | |
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 36 | |
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 26890 | |
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 217 | |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1047 | |
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1047 | |
194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 14/51) | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 26889 - | |
# 2 Extended offline Completed without error 00% 26829 - | |
# 3 Short offline Completed without error 00% 26820 - | |
# 4 Short offline Completed without error 00% 26820 - | |
# 5 Extended offline Completed without error 00% 22470 - | |
# 6 Short offline Completed without error 00% 22234 - | |
# 7 Extended offline Completed without error 00% 19825 - | |
# 8 Extended offline Completed without error 00% 11585 - | |
# 9 Short offline Completed without error 00% 10877 - | |
#10 Extended offline Completed without error 00% 91 - | |
#11 Extended offline Aborted by host 90% 74 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
### conclusions | |
- Drive is just over 4 years old (power on time) | |
- No reallocated sectors | |
- No errors in SMART history | |
This drive is suitable for service. | |
=============================== | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD | |
Device Model: TOSHIBA DT01ACA300 | |
Serial Number: X3544DGKS | |
LU WWN Device Id: 5 000039 ff4cff983 | |
Firmware Version: MX6OABB0 | |
User Capacity: 3,000,592,982,016 bytes [3.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 7200 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) | |
Local Time is: Wed Aug 1 19:10:47 2018 BST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x80) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (22939) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 383) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | |
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 72 | |
3 Spin_Up_Time 0x0007 146 146 024 Pre-fail Always - 372 (Average 411) | |
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 6107 | |
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | |
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33 | |
9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 35585 | |
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 355 | |
192 Power-Off_Retract_Count 0x0032 095 095 000 Old_age Always - 6660 | |
193 Load_Cycle_Count 0x0012 095 095 000 Old_age Always - 6661 | |
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 8/53) | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 35585 - | |
# 2 Extended offline Completed without error 00% 35522 - | |
# 3 Short offline Completed without error 00% 35516 - | |
# 4 Extended offline Completed without error 00% 35509 - | |
# 5 Extended offline Completed without error 00% 35450 - | |
# 6 Short offline Completed without error 00% 35437 - | |
# 7 Extended offline Completed without error 00% 33349 - | |
# 8 Short offline Completed without error 00% 33132 - | |
# 9 Extended offline Completed without error 00% 30735 - | |
#10 Extended offline Completed without error 00% 22498 - | |
#11 Short offline Completed without error 00% 21791 - | |
#12 Extended offline Completed without error 00% 10723 - | |
#13 Short offline Completed without error 00% 10672 - | |
#14 Short offline Completed without error 00% 10663 - | |
#15 Extended offline Completed without error 00% 8702 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
### conclusions | |
- Drive is just over 3 years old (power on time) | |
- High load cycle count (WD green so needs that resetting) | |
- No reallocated sectors | |
- No errors in SMART history | |
This drive is suitable for service. | |
=============================== | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Green | |
Device Model: WDC WD30EZRX-00DC0B0 | |
Serial Number: WD-WMC1T1369245 | |
LU WWN Device Id: 5 0014ee 00379a3af | |
Firmware Version: 80.00A80 | |
User Capacity: 3,000,592,982,016 bytes [3.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) | |
Local Time is: Wed Aug 1 19:09:59 2018 BST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (39900) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 400) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x70b5) SCT Status supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 | |
3 Spin_Up_Time 0x0027 176 173 021 Pre-fail Always - 6175 | |
4 Start_Stop_Count 0x0032 086 086 000 Old_age Always - 14989 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 060 060 000 Old_age Always - 29266 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 250 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 164 | |
193 Load_Cycle_Count 0x0032 189 189 000 Old_age Always - 35092 | |
194 Temperature_Celsius 0x0022 122 107 000 Old_age Always - 28 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 29266 - | |
# 2 Extended offline Completed without error 00% 29258 - | |
# 3 Short offline Completed without error 00% 29251 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment