adrianratnapala

I used to think that

ssh -X me@some.box

"just bloody worked". However this might not work - ssh must play ball on both sides of the link. On the remote (ssh server, X client) sshd must sit behind some port, tell Xlib to send X11 requests to it and then forward them back to you the X server (where the ssh client is). If the remote box is locked down to prevent this, you will get:

X11 forwarding request failed on channel 0

as part of an otherwise working login. As it happens, I am the admin of the remote box in question, so I followed the ArchWiki and went to /etc/ssh/sshd_config and uncommented

surjikal

Follow these steps to install Graphite on a fresh Ubuntu 12.04 instance. Make sure you read and understand the commands because by the time you read this, things could be outdated.

Graphite

Installing dependencies

# apt-get install libpq-dev
# apt-get install python-dev python-pip python-cairo python-psycopg2
# apt-get install python-django python-django-tagging

smougenot

  # stacktrace java as one message
  multiline {
    #type => "all" # no type means for all inputs
    pattern => "(^.+Exception: .+)|(^\s+at .+)|(^\s+... \d+ more)|(^\s*Caused by:.+)"
    what => "previous"
  }

piscisaureus

Locate the section for your github remote in the .git/config file. It looks like this:

[remote "origin"]
	fetch = +refs/heads/*:refs/remotes/origin/*
	url = git@github.com:joyent/node.git

Now add the line fetch = +refs/pull/*/head:refs/remotes/origin/pr/* to this section. Obviously, change the github url to match your project's URL. It ends up looking like this:

jtan189

import java.security.SecureRandom;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.SecretKeyFactory;
import java.math.BigInteger;
import java.security.NoSuchAlgorithmException;
import java.security.spec.InvalidKeySpecException;

/*
 * PBKDF2 salted password hashing.
 * Author: havoc AT defuse.ca

noteed

Running Docker on two hosts, bridged with Open vSwitch

This Gist shows how to use Open vSwitch to bridge Docker containers on two hosts. It is based on this blog post http://goldmann.pl/blog/2014/01/21/connecting-docker-containers-on-multiple-hosts/.

A similar Gist using Tinc instead of Open vSwitch is available: https://gist.github.com/noteed/11031504.

Setup

noteed

Running Docker on two hosts, bridged with Tinc

This Gist is similar to https://gist.github.com/noteed/8656989 which uses Open vSwitch instead of Tinc.

Setup

Download the install.sh script and run it:

> https://gist.githubusercontent.com/noteed/11031504/raw/install.sh

taktran

Commands for controlling the Raspberry Pi 2 LEDs.

See rpi-leds for a node module that does this.

Power (PWR) LED

• OK (ACT) LED = led0
• Power (PWR) LED = led1

Allow access

chantastic

Hi Nicholas,

I saw you tweet about JSX yesterday. It seemed like the discussion devolved pretty quickly but I wanted to share our experience over the last year. I understand your concerns. I've made similar remarks about JSX. When we started using it Planning Center, I led the charge to write React without it. I don't imagine I'd have much to say that you haven't considered but, if it's helpful, here's a pattern that changed my opinion:

The idea that "React is the V in MVC" is disingenuous. It's a good pitch but, for many of us, it feels like in invitation to repeat our history of coupled views. In practice, React is the V and the C. Dan Abramov describes the division as Smart and Dumb Components. At our office, we call them stateless and container components (view-controllers if we're Flux). The idea is pretty simple: components can't

sdorra

/*
 * Genarate rsa keys.
 */

package main

import (
	"crypto/rand"
	"crypto/rsa"
	"crypto/x509"