Skip to content

Instantly share code, notes, and snippets.

@jabelk
Last active October 16, 2017 02:27
Show Gist options
  • Save jabelk/4bb2e68281ec205ffffb1b363af8c08f to your computer and use it in GitHub Desktop.
Save jabelk/4bb2e68281ec205ffffb1b363af8c08f to your computer and use it in GitHub Desktop.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ sudo make docker-image
Makefile:15: warning: overriding recipe for target 'docker-pre-build'
../makefile.include:18: warning: ignoring old recipe for target 'docker-pre-build'
for IMAGE in csr1000v-universalk9.16.04.01-serial.qcow2; do \
echo "Making $IMAGE"; \
make IMAGE=$IMAGE docker-build; \
done
Making csr1000v-universalk9.16.04.01-serial.qcow2
make[1]: Entering directory '/home/jabelk/mytestingspace/vrnetlab/csr'
Makefile:15: warning: overriding recipe for target 'docker-pre-build'
../makefile.include:18: warning: ignoring old recipe for target 'docker-pre-build'
rm -f docker/*.qcow2* docker/*.tgz* docker/*.vmdk* docker/*.iso
cat cidfile | xargs --no-run-if-empty docker rm -f
Error response from daemon: No such container: 498cccf7f3b65578f623485268b2ad766b2bc7128b53ed64e2c95b69cc67a75a
Makefile:15: recipe for target 'docker-pre-build' failed
make[1]: [docker-pre-build] Error 123 (ignored)
rm cidfile
Building docker image using csr1000v-universalk9.16.04.01-serial.qcow2 as vr-csr:16.04.01
cp ../common/* docker/
make IMAGE=$IMAGE docker-build-image-copy
make[2]: Entering directory '/home/jabelk/mytestingspace/vrnetlab/csr'
Makefile:15: warning: overriding recipe for target 'docker-pre-build'
../makefile.include:18: warning: ignoring old recipe for target 'docker-pre-build'
cp csr1000v-universalk9.16.04.01-serial.qcow2* docker/
make[2]: Leaving directory '/home/jabelk/mytestingspace/vrnetlab/csr'
(cd docker; docker build --build-arg http_proxy= --build-arg https_proxy= --build-arg IMAGE=csr1000v-universalk9.16.04.01-serial.qcow2 -t vr-csr:16.04.01 .)
Sending build context to Docker daemon 1.458 GB
Step 1 : FROM debian:stable
---> 175074065266
Step 2 : MAINTAINER Kristian Larsson <kristian@spritelink.net>
---> Using cache
---> f3ba982d4ec9
Step 3 : ENV DEBIAN_FRONTEND noninteractive
---> Using cache
---> 0ab7a7c6ac08
Step 4 : RUN apt-get update -qy && apt-get upgrade -qy && apt-get install -y bridge-utils iproute2 python3-ipy socat qemu-kvm genisoimage && rm -rf /var/lib/apt/lists/*
---> Running in 2d0db8e2037b
Ign:1 http://deb.debian.org/debian stable InRelease
Get:2 http://deb.debian.org/debian stable-updates InRelease [91.0 kB]
Get:3 http://security.debian.org stable/updates InRelease [62.9 kB]
Get:4 http://deb.debian.org/debian stable Release [118 kB]
Get:5 http://deb.debian.org/debian stable Release.gpg [2479 B]
Get:6 http://security.debian.org stable/updates/main amd64 Packages [222 kB]
Get:7 http://deb.debian.org/debian stable-updates/main amd64 Packages [5841 B]
Get:8 http://deb.debian.org/debian stable/main amd64 Packages [9500 kB]
Fetched 10.0 MB in 4s (2360 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt base-files gpgv libapt-pkg5.0 libdb5.3 libncursesw5 libselinux1
libtinfo5 ncurses-base ncurses-bin perl-base
11 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 5839 kB of archives.
After this operation, 5120 B of additional disk space will be used.
Get:1 http://deb.debian.org/debian stable-updates/main amd64 base-files amd64 9.9+deb9u2 [67.2 kB]
Get:2 http://deb.debian.org/debian stable/main amd64 ncurses-bin amd64 6.0+20161126-1+deb9u1 [366 kB]
Get:3 http://deb.debian.org/debian stable/main amd64 perl-base amd64 5.24.1-3+deb9u2 [1344 kB]
Get:4 http://deb.debian.org/debian stable/main amd64 ncurses-base all 6.0+20161126-1+deb9u1 [238 kB]
Get:5 http://deb.debian.org/debian stable/main amd64 libapt-pkg5.0 amd64 1.4.8 [917 kB]
Get:6 http://deb.debian.org/debian stable/main amd64 gpgv amd64 2.1.18-8~deb9u1 [480 kB]
Get:7 http://deb.debian.org/debian stable/main amd64 apt amd64 1.4.8 [1232 kB]
Get:8 http://deb.debian.org/debian stable/main amd64 libselinux1 amd64 2.6-3+b3 [101 kB]
Get:9 http://deb.debian.org/debian stable/main amd64 libtinfo5 amd64 6.0+20161126-1+deb9u1 [299 kB]
Get:10 http://deb.debian.org/debian stable/main amd64 libncursesw5 amd64 6.0+20161126-1+deb9u1 [115 kB]
Get:11 http://deb.debian.org/debian stable/main amd64 libdb5.3 amd64 5.3.28-12+deb9u1 [679 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 5839 kB in 0s (6185 kB/s)
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../base-files_9.9+deb9u2_amd64.deb ...
Unpacking base-files (9.9+deb9u2) over (9.9+deb9u1) ...
Setting up base-files (9.9+deb9u2) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../ncurses-bin_6.0+20161126-1+deb9u1_amd64.deb ...
Unpacking ncurses-bin (6.0+20161126-1+deb9u1) over (6.0+20161126-1) ...
Setting up ncurses-bin (6.0+20161126-1+deb9u1) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../perl-base_5.24.1-3+deb9u2_amd64.deb ...
Unpacking perl-base (5.24.1-3+deb9u2) over (5.24.1-3+deb9u1) ...
Setting up perl-base (5.24.1-3+deb9u2) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../ncurses-base_6.0+20161126-1+deb9u1_all.deb ...
Unpacking ncurses-base (6.0+20161126-1+deb9u1) over (6.0+20161126-1) ...
Setting up ncurses-base (6.0+20161126-1+deb9u1) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../libapt-pkg5.0_1.4.8_amd64.deb ...
Unpacking libapt-pkg5.0:amd64 (1.4.8) over (1.4.7) ...
Setting up libapt-pkg5.0:amd64 (1.4.8) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../gpgv_2.1.18-8~deb9u1_amd64.deb ...
Unpacking gpgv (2.1.18-8~deb9u1) over (2.1.18-6) ...
Setting up gpgv (2.1.18-8~deb9u1) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../archives/apt_1.4.8_amd64.deb ...
Unpacking apt (1.4.8) over (1.4.7) ...
Setting up apt (1.4.8) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../libselinux1_2.6-3+b3_amd64.deb ...
Unpacking libselinux1:amd64 (2.6-3+b3) over (2.6-3+b1) ...
Setting up libselinux1:amd64 (2.6-3+b3) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../libtinfo5_6.0+20161126-1+deb9u1_amd64.deb ...
Unpacking libtinfo5:amd64 (6.0+20161126-1+deb9u1) over (6.0+20161126-1) ...
Setting up libtinfo5:amd64 (6.0+20161126-1+deb9u1) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../libncursesw5_6.0+20161126-1+deb9u1_amd64.deb ...
Unpacking libncursesw5:amd64 (6.0+20161126-1+deb9u1) over (6.0+20161126-1) ...
Setting up libncursesw5:amd64 (6.0+20161126-1+deb9u1) ...
(Reading database ... 6491 files and directories currently installed.)
Preparing to unpack .../libdb5.3_5.3.28-12+deb9u1_amd64.deb ...
Unpacking libdb5.3:amd64 (5.3.28-12+deb9u1) over (5.3.28-12+b1) ...
Setting up libdb5.3:amd64 (5.3.28-12+deb9u1) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
Reading package lists...
Building dependency tree...
Reading state information...
iproute2 is already the newest version (4.9.0-1).
The following additional packages will be installed:
bzip2 dbus dh-python file ipxe-qemu libaio1 libapparmor1 libasound2
libasound2-data libasyncns0 libbluetooth3 libbrlapi0.6 libbsd0 libcaca0
libcacard0 libcap2 libdbus-1-3 libexpat1 libfdt1 libffi6 libflac8
libglib2.0-0 libglib2.0-data libgmp10 libgnutls30 libhogweed4 libice6
libicu57 libidn11 libjpeg62-turbo libmagic-mgc libmagic1 libmpdec2
libnettle6 libnspr4 libnss3 libnuma1 libogg0 libopus0 libp11-kit0
libpixman-1-0 libpng16-16 libpulse0 libpython3-stdlib libpython3.5-minimal
libpython3.5-stdlib libreadline7 libsasl2-2 libsasl2-modules
libsasl2-modules-db libsdl1.2debian libseccomp2 libslang2 libsm6 libsndfile1
libspice-server1 libsqlite3-0 libssl1.1 libtasn1-6 libusb-1.0-0
libusbredirparser1 libvdeplug2 libvorbis0a libvorbisenc2 libwrap0 libx11-6
libx11-data libx11-xcb1 libxau6 libxcb1 libxdmcp6 libxen-4.8 libxenstore3.0
libxext6 libxi6 libxml2 libxtst6 libyajl2 mime-support python3
python3-minimal python3.5 python3.5-minimal qemu-system-common
qemu-system-x86 qemu-utils readline-common seabios sgml-base
shared-mime-info tcpd x11-common xdg-user-dirs xml-core xz-utils
Suggested packages:
ifupdown bzip2-doc default-dbus-session-bus | dbus-session-bus libdpkg-perl
wodim cdrkit-doc libasound2-plugins alsa-utils gnutls-bin opus-tools
pulseaudio libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal
libsasl2-modules-ldap libsasl2-modules-otp libsasl2-modules-sql python3-doc
python3-tk python3-venv python3.5-venv python3.5-doc binutils binfmt-support
samba vde2 qemu-block-extra kmod sgabios ovmf debootstrap readline-doc
sgml-base-doc debhelper
The following NEW packages will be installed:
bridge-utils bzip2 dbus dh-python file genisoimage ipxe-qemu libaio1
libapparmor1 libasound2 libasound2-data libasyncns0 libbluetooth3
libbrlapi0.6 libbsd0 libcaca0 libcacard0 libcap2 libdbus-1-3 libexpat1
libfdt1 libffi6 libflac8 libglib2.0-0 libglib2.0-data libgmp10 libgnutls30
libhogweed4 libice6 libicu57 libidn11 libjpeg62-turbo libmagic-mgc libmagic1
libmpdec2 libnettle6 libnspr4 libnss3 libnuma1 libogg0 libopus0 libp11-kit0
libpixman-1-0 libpng16-16 libpulse0 libpython3-stdlib libpython3.5-minimal
libpython3.5-stdlib libreadline7 libsasl2-2 libsasl2-modules
libsasl2-modules-db libsdl1.2debian libseccomp2 libslang2 libsm6 libsndfile1
libspice-server1 libsqlite3-0 libssl1.1 libtasn1-6 libusb-1.0-0
libusbredirparser1 libvdeplug2 libvorbis0a libvorbisenc2 libwrap0 libx11-6
libx11-data libx11-xcb1 libxau6 libxcb1 libxdmcp6 libxen-4.8 libxenstore3.0
libxext6 libxi6 libxml2 libxtst6 libyajl2 mime-support python3 python3-ipy
python3-minimal python3.5 python3.5-minimal qemu-kvm qemu-system-common
qemu-system-x86 qemu-utils readline-common seabios sgml-base
shared-mime-info socat tcpd x11-common xdg-user-dirs xml-core xz-utils
0 upgraded, 100 newly installed, 0 to remove and 0 not upgraded.
Need to get 41.5 MB of archives.
After this operation, 156 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian stable/main amd64 libogg0 amd64 1.3.2-1 [19.9 kB]
Get:2 http://deb.debian.org/debian stable/main amd64 libxau6 amd64 1:1.0.8-1 [20.7 kB]
Get:3 http://deb.debian.org/debian stable/main amd64 libssl1.1 amd64 1.1.0f-3 [1342 kB]
Get:4 http://security.debian.org stable/updates/main amd64 qemu-system-common amd64 1:2.8+dfsg-6+deb9u3 [500 kB]
Get:5 http://deb.debian.org/debian stable/main amd64 libpython3.5-minimal amd64 3.5.3-1 [573 kB]
Get:6 http://deb.debian.org/debian stable/main amd64 libexpat1 amd64 2.2.0-2+deb9u1 [83.4 kB]
Get:7 http://deb.debian.org/debian stable/main amd64 python3.5-minimal amd64 3.5.3-1 [1688 kB]
Get:8 http://deb.debian.org/debian stable/main amd64 python3-minimal amd64 3.5.3-1 [35.3 kB]
Get:9 http://deb.debian.org/debian stable/main amd64 mime-support all 3.60 [36.7 kB]
Get:10 http://deb.debian.org/debian stable/main amd64 libmpdec2 amd64 2.4.2-1 [85.2 kB]
Get:11 http://deb.debian.org/debian stable/main amd64 readline-common all 7.0-3 [70.4 kB]
Get:12 http://deb.debian.org/debian stable/main amd64 libreadline7 amd64 7.0-3 [151 kB]
Get:13 http://deb.debian.org/debian stable/main amd64 libsqlite3-0 amd64 3.16.2-5 [572 kB]
Get:14 http://deb.debian.org/debian stable/main amd64 libpython3.5-stdlib amd64 3.5.3-1 [2166 kB]
Get:15 http://security.debian.org stable/updates/main amd64 libnss3 amd64 2:3.26.2-1.1+deb9u1 [1161 kB]
Get:16 http://deb.debian.org/debian stable/main amd64 python3.5 amd64 3.5.3-1 [229 kB]
Get:17 http://security.debian.org stable/updates/main amd64 qemu-system-x86 amd64 1:2.8+dfsg-6+deb9u3 [4808 kB]
Get:18 http://deb.debian.org/debian stable/main amd64 libpython3-stdlib amd64 3.5.3-1 [18.6 kB]
Get:19 http://deb.debian.org/debian stable/main amd64 dh-python all 2.20170125 [86.8 kB]
Get:20 http://deb.debian.org/debian stable/main amd64 python3 amd64 3.5.3-1 [21.6 kB]
Get:21 http://deb.debian.org/debian stable/main amd64 libcap2 amd64 1:2.25-1 [16.8 kB]
Get:22 http://deb.debian.org/debian stable/main amd64 libffi6 amd64 3.2.1-6 [20.4 kB]
Get:23 http://deb.debian.org/debian stable/main amd64 libglib2.0-0 amd64 2.50.3-2 [2691 kB]
Get:24 http://deb.debian.org/debian stable/main amd64 sgml-base all 1.29 [14.8 kB]
Get:25 http://deb.debian.org/debian stable/main amd64 libslang2 amd64 2.3.1-5 [503 kB]
Get:26 http://deb.debian.org/debian stable/main amd64 bzip2 amd64 1.0.6-8.1 [47.5 kB]
Get:27 http://deb.debian.org/debian stable/main amd64 libapparmor1 amd64 2.11.0-3 [78.7 kB]
Get:28 http://deb.debian.org/debian stable/main amd64 libdbus-1-3 amd64 1.10.22-0+deb9u1 [193 kB]
Get:29 http://deb.debian.org/debian stable/main amd64 dbus amd64 1.10.22-0+deb9u1 [209 kB]
Get:30 http://deb.debian.org/debian stable/main amd64 libmagic-mgc amd64 1:5.30-1+deb9u1 [222 kB]
Get:31 http://deb.debian.org/debian stable/main amd64 libmagic1 amd64 1:5.30-1+deb9u1 [111 kB]
Get:32 http://deb.debian.org/debian stable/main amd64 file amd64 1:5.30-1+deb9u1 [64.1 kB]
Get:33 http://deb.debian.org/debian stable/main amd64 libgmp10 amd64 2:6.1.2+dfsg-1 [253 kB]
Get:34 http://deb.debian.org/debian stable/main amd64 libnettle6 amd64 3.3-1+b2 [192 kB]
Get:35 http://deb.debian.org/debian stable/main amd64 libhogweed4 amd64 3.3-1+b2 [136 kB]
Get:36 http://deb.debian.org/debian stable/main amd64 libidn11 amd64 1.33-1 [115 kB]
Get:37 http://security.debian.org stable/updates/main amd64 qemu-utils amd64 1:2.8+dfsg-6+deb9u3 [985 kB]
Get:38 http://deb.debian.org/debian stable/main amd64 libp11-kit0 amd64 0.23.3-2 [111 kB]
Get:39 http://deb.debian.org/debian stable/main amd64 libtasn1-6 amd64 4.10-1.1 [50.4 kB]
Get:40 http://deb.debian.org/debian stable/main amd64 libgnutls30 amd64 3.5.8-5+deb9u3 [895 kB]
Get:41 http://security.debian.org stable/updates/main amd64 qemu-kvm amd64 1:2.8+dfsg-6+deb9u3 [65.8 kB]
Get:42 http://deb.debian.org/debian stable/main amd64 libsasl2-modules-db amd64 2.1.27~101-g0780600+dfsg-3 [68.2 kB]
Get:43 http://deb.debian.org/debian stable/main amd64 libsasl2-2 amd64 2.1.27~101-g0780600+dfsg-3 [105 kB]
Get:44 http://deb.debian.org/debian stable/main amd64 libwrap0 amd64 7.6.q-26 [58.2 kB]
Get:45 http://deb.debian.org/debian stable/main amd64 libicu57 amd64 57.1-6 [7701 kB]
Get:46 http://deb.debian.org/debian stable/main amd64 libxml2 amd64 2.9.4+dfsg1-2.2+deb9u1 [920 kB]
Get:47 http://deb.debian.org/debian stable/main amd64 xz-utils amd64 5.2.2-1.2+b1 [266 kB]
Get:48 http://deb.debian.org/debian stable/main amd64 bridge-utils amd64 1.5-13+deb9u1 [34.2 kB]
Get:49 http://deb.debian.org/debian stable/main amd64 genisoimage amd64 9:1.1.11-3+b2 [376 kB]
Get:50 http://deb.debian.org/debian stable/main amd64 ipxe-qemu all 1.0.0+git-20161027.b991c67-1 [605 kB]
Get:51 http://deb.debian.org/debian stable/main amd64 libaio1 amd64 0.3.110-3 [9412 B]
Get:52 http://deb.debian.org/debian stable/main amd64 libasound2-data all 1.1.3-5 [173 kB]
Get:53 http://deb.debian.org/debian stable/main amd64 libasound2 amd64 1.1.3-5 [497 kB]
Get:54 http://deb.debian.org/debian stable/main amd64 libasyncns0 amd64 0.8-6 [12.5 kB]
Get:55 http://deb.debian.org/debian stable/main amd64 libbluetooth3 amd64 5.43-2+deb9u1 [97.8 kB]
Get:56 http://deb.debian.org/debian stable/main amd64 libbsd0 amd64 0.8.3-1 [83.0 kB]
Get:57 http://deb.debian.org/debian stable/main amd64 libcaca0 amd64 0.99.beta19-2+b2 [347 kB]
Get:58 http://deb.debian.org/debian stable/main amd64 libnspr4 amd64 2:4.12-6 [117 kB]
Get:59 http://deb.debian.org/debian stable/main amd64 libcacard0 amd64 1:2.5.0-3 [47.2 kB]
Get:60 http://deb.debian.org/debian stable/main amd64 libflac8 amd64 1.3.2-1 [221 kB]
Get:61 http://deb.debian.org/debian stable/main amd64 libglib2.0-data all 2.50.3-2 [2517 kB]
Get:62 http://deb.debian.org/debian stable/main amd64 x11-common all 1:7.7+19 [251 kB]
Get:63 http://deb.debian.org/debian stable/main amd64 libice6 amd64 2:1.0.9-2 [58.7 kB]
Get:64 http://deb.debian.org/debian stable/main amd64 libjpeg62-turbo amd64 1:1.5.1-2 [134 kB]
Get:65 http://deb.debian.org/debian stable/main amd64 libnuma1 amd64 2.0.11-2.1 [33.3 kB]
Get:66 http://deb.debian.org/debian stable/main amd64 libopus0 amd64 1.2~alpha2-1 [171 kB]
Get:67 http://deb.debian.org/debian stable/main amd64 libpixman-1-0 amd64 0.34.0-1 [530 kB]
Get:68 http://deb.debian.org/debian stable/main amd64 libpng16-16 amd64 1.6.28-1 [280 kB]
Get:69 http://deb.debian.org/debian stable/main amd64 libsm6 amd64 2:1.2.2-1+b3 [33.3 kB]
Get:70 http://deb.debian.org/debian stable/main amd64 libvorbis0a amd64 1.3.5-4 [91.6 kB]
Get:71 http://deb.debian.org/debian stable/main amd64 libvorbisenc2 amd64 1.3.5-4 [79.0 kB]
Get:72 http://deb.debian.org/debian stable/main amd64 libsndfile1 amd64 1.0.27-3 [248 kB]
Get:73 http://deb.debian.org/debian stable/main amd64 libxdmcp6 amd64 1:1.1.2-3 [26.3 kB]
Get:74 http://deb.debian.org/debian stable/main amd64 libxcb1 amd64 1.12-1 [133 kB]
Get:75 http://deb.debian.org/debian stable/main amd64 libx11-data all 2:1.6.4-3 [290 kB]
Get:76 http://deb.debian.org/debian stable/main amd64 libx11-6 amd64 2:1.6.4-3 [747 kB]
Get:77 http://deb.debian.org/debian stable/main amd64 libx11-xcb1 amd64 2:1.6.4-3 [183 kB]
Get:78 http://deb.debian.org/debian stable/main amd64 libxext6 amd64 2:1.3.3-1+b2 [52.5 kB]
Get:79 http://deb.debian.org/debian stable/main amd64 libxi6 amd64 2:1.7.9-1 [82.6 kB]
Get:80 http://deb.debian.org/debian stable/main amd64 libxtst6 amd64 2:1.2.3-1 [27.8 kB]
Get:81 http://deb.debian.org/debian stable/main amd64 libpulse0 amd64 10.0-1+deb9u1 [283 kB]
Get:82 http://deb.debian.org/debian stable/main amd64 libsasl2-modules amd64 2.1.27~101-g0780600+dfsg-3 [102 kB]
Get:83 http://deb.debian.org/debian stable/main amd64 libsdl1.2debian amd64 1.2.15+dfsg1-4 [185 kB]
Get:84 http://deb.debian.org/debian stable/main amd64 libseccomp2 amd64 2.3.1-2.1 [39.5 kB]
Get:85 http://deb.debian.org/debian stable/main amd64 libspice-server1 amd64 0.12.8-2.1+deb9u1 [505 kB]
Get:86 http://deb.debian.org/debian stable/main amd64 libusb-1.0-0 amd64 2:1.0.21-1 [53.9 kB]
Get:87 http://deb.debian.org/debian stable/main amd64 libusbredirparser1 amd64 0.7.1-1 [16.4 kB]
Get:88 http://deb.debian.org/debian stable/main amd64 libvdeplug2 amd64 2.3.2+r586-2.1 [23.5 kB]
Get:89 http://deb.debian.org/debian stable/main amd64 libxenstore3.0 amd64 4.8.1-1+deb9u3 [32.8 kB]
Get:90 http://deb.debian.org/debian stable/main amd64 libyajl2 amd64 2.1.0-2+b3 [23.2 kB]
Get:91 http://deb.debian.org/debian stable/main amd64 libxen-4.8 amd64 4.8.1-1+deb9u3 [410 kB]
Get:92 http://deb.debian.org/debian stable/main amd64 python3-ipy all 1:0.83-1 [29.3 kB]
Get:93 http://deb.debian.org/debian stable/main amd64 libbrlapi0.6 amd64 5.4-7 [88.3 kB]
Get:94 http://deb.debian.org/debian stable/main amd64 libfdt1 amd64 1.4.2-1 [14.8 kB]
Get:95 http://deb.debian.org/debian stable/main amd64 seabios all 1.10.2-1 [131 kB]
Get:96 http://deb.debian.org/debian stable/main amd64 shared-mime-info amd64 1.8-1 [731 kB]
Get:97 http://deb.debian.org/debian stable/main amd64 tcpd amd64 7.6.q-26 [23.3 kB]
Get:98 http://deb.debian.org/debian stable/main amd64 xdg-user-dirs amd64 0.15-2+b1 [52.2 kB]
Get:99 http://deb.debian.org/debian stable/main amd64 xml-core all 0.17 [23.2 kB]
Get:100 http://deb.debian.org/debian stable/main amd64 socat amd64 1.7.3.1-2+deb9u1 [353 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 41.5 MB in 9s (4322 kB/s)
Selecting previously unselected package libogg0:amd64.
(Reading database ... 6490 files and directories currently installed.)
Preparing to unpack .../00-libogg0_1.3.2-1_amd64.deb ...
Unpacking libogg0:amd64 (1.3.2-1) ...
Selecting previously unselected package libxau6:amd64.
Preparing to unpack .../01-libxau6_1%3a1.0.8-1_amd64.deb ...
Unpacking libxau6:amd64 (1:1.0.8-1) ...
Selecting previously unselected package libssl1.1:amd64.
Preparing to unpack .../02-libssl1.1_1.1.0f-3_amd64.deb ...
Unpacking libssl1.1:amd64 (1.1.0f-3) ...
Selecting previously unselected package libpython3.5-minimal:amd64.
Preparing to unpack .../03-libpython3.5-minimal_3.5.3-1_amd64.deb ...
Unpacking libpython3.5-minimal:amd64 (3.5.3-1) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../04-libexpat1_2.2.0-2+deb9u1_amd64.deb ...
Unpacking libexpat1:amd64 (2.2.0-2+deb9u1) ...
Selecting previously unselected package python3.5-minimal.
Preparing to unpack .../05-python3.5-minimal_3.5.3-1_amd64.deb ...
Unpacking python3.5-minimal (3.5.3-1) ...
Selecting previously unselected package python3-minimal.
Preparing to unpack .../06-python3-minimal_3.5.3-1_amd64.deb ...
Unpacking python3-minimal (3.5.3-1) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../07-mime-support_3.60_all.deb ...
Unpacking mime-support (3.60) ...
Selecting previously unselected package libmpdec2:amd64.
Preparing to unpack .../08-libmpdec2_2.4.2-1_amd64.deb ...
Unpacking libmpdec2:amd64 (2.4.2-1) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../09-readline-common_7.0-3_all.deb ...
Unpacking readline-common (7.0-3) ...
Selecting previously unselected package libreadline7:amd64.
Preparing to unpack .../10-libreadline7_7.0-3_amd64.deb ...
Unpacking libreadline7:amd64 (7.0-3) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../11-libsqlite3-0_3.16.2-5_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.16.2-5) ...
Selecting previously unselected package libpython3.5-stdlib:amd64.
Preparing to unpack .../12-libpython3.5-stdlib_3.5.3-1_amd64.deb ...
Unpacking libpython3.5-stdlib:amd64 (3.5.3-1) ...
Selecting previously unselected package python3.5.
Preparing to unpack .../13-python3.5_3.5.3-1_amd64.deb ...
Unpacking python3.5 (3.5.3-1) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../14-libpython3-stdlib_3.5.3-1_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.5.3-1) ...
Selecting previously unselected package dh-python.
Preparing to unpack .../15-dh-python_2.20170125_all.deb ...
Unpacking dh-python (2.20170125) ...
Setting up libssl1.1:amd64 (1.1.0f-3) ...
Setting up libpython3.5-minimal:amd64 (3.5.3-1) ...
Setting up libexpat1:amd64 (2.2.0-2+deb9u1) ...
Setting up python3.5-minimal (3.5.3-1) ...
Setting up python3-minimal (3.5.3-1) ...
Selecting previously unselected package python3.
(Reading database ... 7495 files and directories currently installed.)
Preparing to unpack .../00-python3_3.5.3-1_amd64.deb ...
Unpacking python3 (3.5.3-1) ...
Selecting previously unselected package libcap2:amd64.
Preparing to unpack .../01-libcap2_1%3a2.25-1_amd64.deb ...
Unpacking libcap2:amd64 (1:2.25-1) ...
Selecting previously unselected package libffi6:amd64.
Preparing to unpack .../02-libffi6_3.2.1-6_amd64.deb ...
Unpacking libffi6:amd64 (3.2.1-6) ...
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack .../03-libglib2.0-0_2.50.3-2_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.50.3-2) ...
Selecting previously unselected package qemu-system-common.
Preparing to unpack .../04-qemu-system-common_1%3a2.8+dfsg-6+deb9u3_amd64.deb ...
Unpacking qemu-system-common (1:2.8+dfsg-6+deb9u3) ...
Selecting previously unselected package sgml-base.
Preparing to unpack .../05-sgml-base_1.29_all.deb ...
Unpacking sgml-base (1.29) ...
Selecting previously unselected package libslang2:amd64.
Preparing to unpack .../06-libslang2_2.3.1-5_amd64.deb ...
Unpacking libslang2:amd64 (2.3.1-5) ...
Selecting previously unselected package bzip2.
Preparing to unpack .../07-bzip2_1.0.6-8.1_amd64.deb ...
Unpacking bzip2 (1.0.6-8.1) ...
Selecting previously unselected package libapparmor1:amd64.
Preparing to unpack .../08-libapparmor1_2.11.0-3_amd64.deb ...
Unpacking libapparmor1:amd64 (2.11.0-3) ...
Selecting previously unselected package libdbus-1-3:amd64.
Preparing to unpack .../09-libdbus-1-3_1.10.22-0+deb9u1_amd64.deb ...
Unpacking libdbus-1-3:amd64 (1.10.22-0+deb9u1) ...
Selecting previously unselected package dbus.
Preparing to unpack .../10-dbus_1.10.22-0+deb9u1_amd64.deb ...
Unpacking dbus (1.10.22-0+deb9u1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../11-libmagic-mgc_1%3a5.30-1+deb9u1_amd64.deb ...
Unpacking libmagic-mgc (1:5.30-1+deb9u1) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../12-libmagic1_1%3a5.30-1+deb9u1_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.30-1+deb9u1) ...
Selecting previously unselected package file.
Preparing to unpack .../13-file_1%3a5.30-1+deb9u1_amd64.deb ...
Unpacking file (1:5.30-1+deb9u1) ...
Selecting previously unselected package libgmp10:amd64.
Preparing to unpack .../14-libgmp10_2%3a6.1.2+dfsg-1_amd64.deb ...
Unpacking libgmp10:amd64 (2:6.1.2+dfsg-1) ...
Selecting previously unselected package libnettle6:amd64.
Preparing to unpack .../15-libnettle6_3.3-1+b2_amd64.deb ...
Unpacking libnettle6:amd64 (3.3-1+b2) ...
Selecting previously unselected package libhogweed4:amd64.
Preparing to unpack .../16-libhogweed4_3.3-1+b2_amd64.deb ...
Unpacking libhogweed4:amd64 (3.3-1+b2) ...
Selecting previously unselected package libidn11:amd64.
Preparing to unpack .../17-libidn11_1.33-1_amd64.deb ...
Unpacking libidn11:amd64 (1.33-1) ...
Selecting previously unselected package libp11-kit0:amd64.
Preparing to unpack .../18-libp11-kit0_0.23.3-2_amd64.deb ...
Unpacking libp11-kit0:amd64 (0.23.3-2) ...
Selecting previously unselected package libtasn1-6:amd64.
Preparing to unpack .../19-libtasn1-6_4.10-1.1_amd64.deb ...
Unpacking libtasn1-6:amd64 (4.10-1.1) ...
Selecting previously unselected package libgnutls30:amd64.
Preparing to unpack .../20-libgnutls30_3.5.8-5+deb9u3_amd64.deb ...
Unpacking libgnutls30:amd64 (3.5.8-5+deb9u3) ...
Selecting previously unselected package libsasl2-modules-db:amd64.
Preparing to unpack .../21-libsasl2-modules-db_2.1.27~101-g0780600+dfsg-3_amd64.deb ...
Unpacking libsasl2-modules-db:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Selecting previously unselected package libsasl2-2:amd64.
Preparing to unpack .../22-libsasl2-2_2.1.27~101-g0780600+dfsg-3_amd64.deb ...
Unpacking libsasl2-2:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Selecting previously unselected package libwrap0:amd64.
Preparing to unpack .../23-libwrap0_7.6.q-26_amd64.deb ...
Unpacking libwrap0:amd64 (7.6.q-26) ...
Selecting previously unselected package libicu57:amd64.
Preparing to unpack .../24-libicu57_57.1-6_amd64.deb ...
Unpacking libicu57:amd64 (57.1-6) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../25-libxml2_2.9.4+dfsg1-2.2+deb9u1_amd64.deb ...
Unpacking libxml2:amd64 (2.9.4+dfsg1-2.2+deb9u1) ...
Selecting previously unselected package xz-utils.
Preparing to unpack .../26-xz-utils_5.2.2-1.2+b1_amd64.deb ...
Unpacking xz-utils (5.2.2-1.2+b1) ...
Selecting previously unselected package bridge-utils.
Preparing to unpack .../27-bridge-utils_1.5-13+deb9u1_amd64.deb ...
Unpacking bridge-utils (1.5-13+deb9u1) ...
Selecting previously unselected package genisoimage.
Preparing to unpack .../28-genisoimage_9%3a1.1.11-3+b2_amd64.deb ...
Unpacking genisoimage (9:1.1.11-3+b2) ...
Selecting previously unselected package ipxe-qemu.
Preparing to unpack .../29-ipxe-qemu_1.0.0+git-20161027.b991c67-1_all.deb ...
Unpacking ipxe-qemu (1.0.0+git-20161027.b991c67-1) ...
Selecting previously unselected package libaio1:amd64.
Preparing to unpack .../30-libaio1_0.3.110-3_amd64.deb ...
Unpacking libaio1:amd64 (0.3.110-3) ...
Selecting previously unselected package libasound2-data.
Preparing to unpack .../31-libasound2-data_1.1.3-5_all.deb ...
Unpacking libasound2-data (1.1.3-5) ...
Selecting previously unselected package libasound2:amd64.
Preparing to unpack .../32-libasound2_1.1.3-5_amd64.deb ...
Unpacking libasound2:amd64 (1.1.3-5) ...
Selecting previously unselected package libasyncns0:amd64.
Preparing to unpack .../33-libasyncns0_0.8-6_amd64.deb ...
Unpacking libasyncns0:amd64 (0.8-6) ...
Selecting previously unselected package libbluetooth3:amd64.
Preparing to unpack .../34-libbluetooth3_5.43-2+deb9u1_amd64.deb ...
Unpacking libbluetooth3:amd64 (5.43-2+deb9u1) ...
Selecting previously unselected package libbsd0:amd64.
Preparing to unpack .../35-libbsd0_0.8.3-1_amd64.deb ...
Unpacking libbsd0:amd64 (0.8.3-1) ...
Selecting previously unselected package libcaca0:amd64.
Preparing to unpack .../36-libcaca0_0.99.beta19-2+b2_amd64.deb ...
Unpacking libcaca0:amd64 (0.99.beta19-2+b2) ...
Selecting previously unselected package libnspr4:amd64.
Preparing to unpack .../37-libnspr4_2%3a4.12-6_amd64.deb ...
Unpacking libnspr4:amd64 (2:4.12-6) ...
Selecting previously unselected package libnss3:amd64.
Preparing to unpack .../38-libnss3_2%3a3.26.2-1.1+deb9u1_amd64.deb ...
Unpacking libnss3:amd64 (2:3.26.2-1.1+deb9u1) ...
Selecting previously unselected package libcacard0:amd64.
Preparing to unpack .../39-libcacard0_1%3a2.5.0-3_amd64.deb ...
Unpacking libcacard0:amd64 (1:2.5.0-3) ...
Selecting previously unselected package libflac8:amd64.
Preparing to unpack .../40-libflac8_1.3.2-1_amd64.deb ...
Unpacking libflac8:amd64 (1.3.2-1) ...
Selecting previously unselected package libglib2.0-data.
Preparing to unpack .../41-libglib2.0-data_2.50.3-2_all.deb ...
Unpacking libglib2.0-data (2.50.3-2) ...
Selecting previously unselected package x11-common.
Preparing to unpack .../42-x11-common_1%3a7.7+19_all.deb ...
Unpacking x11-common (1:7.7+19) ...
Selecting previously unselected package libice6:amd64.
Preparing to unpack .../43-libice6_2%3a1.0.9-2_amd64.deb ...
Unpacking libice6:amd64 (2:1.0.9-2) ...
Selecting previously unselected package libjpeg62-turbo:amd64.
Preparing to unpack .../44-libjpeg62-turbo_1%3a1.5.1-2_amd64.deb ...
Unpacking libjpeg62-turbo:amd64 (1:1.5.1-2) ...
Selecting previously unselected package libnuma1:amd64.
Preparing to unpack .../45-libnuma1_2.0.11-2.1_amd64.deb ...
Unpacking libnuma1:amd64 (2.0.11-2.1) ...
Selecting previously unselected package libopus0:amd64.
Preparing to unpack .../46-libopus0_1.2~alpha2-1_amd64.deb ...
Unpacking libopus0:amd64 (1.2~alpha2-1) ...
Selecting previously unselected package libpixman-1-0:amd64.
Preparing to unpack .../47-libpixman-1-0_0.34.0-1_amd64.deb ...
Unpacking libpixman-1-0:amd64 (0.34.0-1) ...
Selecting previously unselected package libpng16-16:amd64.
Preparing to unpack .../48-libpng16-16_1.6.28-1_amd64.deb ...
Unpacking libpng16-16:amd64 (1.6.28-1) ...
Selecting previously unselected package libsm6:amd64.
Preparing to unpack .../49-libsm6_2%3a1.2.2-1+b3_amd64.deb ...
Unpacking libsm6:amd64 (2:1.2.2-1+b3) ...
Selecting previously unselected package libvorbis0a:amd64.
Preparing to unpack .../50-libvorbis0a_1.3.5-4_amd64.deb ...
Unpacking libvorbis0a:amd64 (1.3.5-4) ...
Selecting previously unselected package libvorbisenc2:amd64.
Preparing to unpack .../51-libvorbisenc2_1.3.5-4_amd64.deb ...
Unpacking libvorbisenc2:amd64 (1.3.5-4) ...
Selecting previously unselected package libsndfile1:amd64.
Preparing to unpack .../52-libsndfile1_1.0.27-3_amd64.deb ...
Unpacking libsndfile1:amd64 (1.0.27-3) ...
Selecting previously unselected package libxdmcp6:amd64.
Preparing to unpack .../53-libxdmcp6_1%3a1.1.2-3_amd64.deb ...
Unpacking libxdmcp6:amd64 (1:1.1.2-3) ...
Selecting previously unselected package libxcb1:amd64.
Preparing to unpack .../54-libxcb1_1.12-1_amd64.deb ...
Unpacking libxcb1:amd64 (1.12-1) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../55-libx11-data_2%3a1.6.4-3_all.deb ...
Unpacking libx11-data (2:1.6.4-3) ...
Selecting previously unselected package libx11-6:amd64.
Preparing to unpack .../56-libx11-6_2%3a1.6.4-3_amd64.deb ...
Unpacking libx11-6:amd64 (2:1.6.4-3) ...
Selecting previously unselected package libx11-xcb1:amd64.
Preparing to unpack .../57-libx11-xcb1_2%3a1.6.4-3_amd64.deb ...
Unpacking libx11-xcb1:amd64 (2:1.6.4-3) ...
Selecting previously unselected package libxext6:amd64.
Preparing to unpack .../58-libxext6_2%3a1.3.3-1+b2_amd64.deb ...
Unpacking libxext6:amd64 (2:1.3.3-1+b2) ...
Selecting previously unselected package libxi6:amd64.
Preparing to unpack .../59-libxi6_2%3a1.7.9-1_amd64.deb ...
Unpacking libxi6:amd64 (2:1.7.9-1) ...
Selecting previously unselected package libxtst6:amd64.
Preparing to unpack .../60-libxtst6_2%3a1.2.3-1_amd64.deb ...
Unpacking libxtst6:amd64 (2:1.2.3-1) ...
Selecting previously unselected package libpulse0:amd64.
Preparing to unpack .../61-libpulse0_10.0-1+deb9u1_amd64.deb ...
Unpacking libpulse0:amd64 (10.0-1+deb9u1) ...
Selecting previously unselected package libsasl2-modules:amd64.
Preparing to unpack .../62-libsasl2-modules_2.1.27~101-g0780600+dfsg-3_amd64.deb ...
Unpacking libsasl2-modules:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Selecting previously unselected package libsdl1.2debian:amd64.
Preparing to unpack .../63-libsdl1.2debian_1.2.15+dfsg1-4_amd64.deb ...
Unpacking libsdl1.2debian:amd64 (1.2.15+dfsg1-4) ...
Selecting previously unselected package libseccomp2:amd64.
Preparing to unpack .../64-libseccomp2_2.3.1-2.1_amd64.deb ...
Unpacking libseccomp2:amd64 (2.3.1-2.1) ...
Selecting previously unselected package libspice-server1:amd64.
Preparing to unpack .../65-libspice-server1_0.12.8-2.1+deb9u1_amd64.deb ...
Unpacking libspice-server1:amd64 (0.12.8-2.1+deb9u1) ...
Selecting previously unselected package libusb-1.0-0:amd64.
Preparing to unpack .../66-libusb-1.0-0_2%3a1.0.21-1_amd64.deb ...
Unpacking libusb-1.0-0:amd64 (2:1.0.21-1) ...
Selecting previously unselected package libusbredirparser1:amd64.
Preparing to unpack .../67-libusbredirparser1_0.7.1-1_amd64.deb ...
Unpacking libusbredirparser1:amd64 (0.7.1-1) ...
Selecting previously unselected package libvdeplug2.
Preparing to unpack .../68-libvdeplug2_2.3.2+r586-2.1_amd64.deb ...
Unpacking libvdeplug2 (2.3.2+r586-2.1) ...
Selecting previously unselected package libxenstore3.0:amd64.
Preparing to unpack .../69-libxenstore3.0_4.8.1-1+deb9u3_amd64.deb ...
Unpacking libxenstore3.0:amd64 (4.8.1-1+deb9u3) ...
Selecting previously unselected package libyajl2:amd64.
Preparing to unpack .../70-libyajl2_2.1.0-2+b3_amd64.deb ...
Unpacking libyajl2:amd64 (2.1.0-2+b3) ...
Selecting previously unselected package libxen-4.8:amd64.
Preparing to unpack .../71-libxen-4.8_4.8.1-1+deb9u3_amd64.deb ...
Unpacking libxen-4.8:amd64 (4.8.1-1+deb9u3) ...
Selecting previously unselected package python3-ipy.
Preparing to unpack .../72-python3-ipy_1%3a0.83-1_all.deb ...
Unpacking python3-ipy (1:0.83-1) ...
Selecting previously unselected package libbrlapi0.6:amd64.
Preparing to unpack .../73-libbrlapi0.6_5.4-7_amd64.deb ...
Unpacking libbrlapi0.6:amd64 (5.4-7) ...
Selecting previously unselected package libfdt1:amd64.
Preparing to unpack .../74-libfdt1_1.4.2-1_amd64.deb ...
Unpacking libfdt1:amd64 (1.4.2-1) ...
Selecting previously unselected package seabios.
Preparing to unpack .../75-seabios_1.10.2-1_all.deb ...
Unpacking seabios (1.10.2-1) ...
Selecting previously unselected package qemu-system-x86.
Preparing to unpack .../76-qemu-system-x86_1%3a2.8+dfsg-6+deb9u3_amd64.deb ...
Unpacking qemu-system-x86 (1:2.8+dfsg-6+deb9u3) ...
Selecting previously unselected package qemu-utils.
Preparing to unpack .../77-qemu-utils_1%3a2.8+dfsg-6+deb9u3_amd64.deb ...
Unpacking qemu-utils (1:2.8+dfsg-6+deb9u3) ...
Selecting previously unselected package shared-mime-info.
Preparing to unpack .../78-shared-mime-info_1.8-1_amd64.deb ...
Unpacking shared-mime-info (1.8-1) ...
Selecting previously unselected package tcpd.
Preparing to unpack .../79-tcpd_7.6.q-26_amd64.deb ...
Unpacking tcpd (7.6.q-26) ...
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack .../80-xdg-user-dirs_0.15-2+b1_amd64.deb ...
Unpacking xdg-user-dirs (0.15-2+b1) ...
Selecting previously unselected package xml-core.
Preparing to unpack .../81-xml-core_0.17_all.deb ...
Unpacking xml-core (0.17) ...
Selecting previously unselected package qemu-kvm.
Preparing to unpack .../82-qemu-kvm_1%3a2.8+dfsg-6+deb9u3_amd64.deb ...
Unpacking qemu-kvm (1:2.8+dfsg-6+deb9u3) ...
Selecting previously unselected package socat.
Preparing to unpack .../83-socat_1.7.3.1-2+deb9u1_amd64.deb ...
Unpacking socat (1.7.3.1-2+deb9u1) ...
Setting up seabios (1.10.2-1) ...
Setting up readline-common (7.0-3) ...
Setting up libnettle6:amd64 (3.3-1+b2) ...
Setting up libasyncns0:amd64 (0.8-6) ...
Setting up libjpeg62-turbo:amd64 (1:1.5.1-2) ...
Setting up mime-support (3.60) ...
Setting up libpng16-16:amd64 (1.6.28-1) ...
Setting up libreadline7:amd64 (7.0-3) ...
Setting up libnuma1:amd64 (2.0.11-2.1) ...
Setting up libasound2-data (1.1.3-5) ...
Setting up libcap2:amd64 (1:2.25-1) ...
Setting up libusbredirparser1:amd64 (0.7.1-1) ...
Setting up libsasl2-modules-db:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Setting up libbluetooth3:amd64 (5.43-2+deb9u1) ...
Setting up libsasl2-2:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Setting up libxenstore3.0:amd64 (4.8.1-1+deb9u3) ...
Setting up sgml-base (1.29) ...
Setting up libicu57:amd64 (57.1-6) ...
Setting up libbsd0:amd64 (0.8.3-1) ...
Setting up libnspr4:amd64 (2:4.12-6) ...
Setting up libxml2:amd64 (2.9.4+dfsg1-2.2+deb9u1) ...
Setting up bridge-utils (1.5-13+deb9u1) ...
Setting up libopus0:amd64 (1.2~alpha2-1) ...
Setting up libtasn1-6:amd64 (4.10-1.1) ...
Setting up libmagic-mgc (1:5.30-1+deb9u1) ...
Setting up libasound2:amd64 (1.1.3-5) ...
Setting up bzip2 (1.0.6-8.1) ...
Setting up libmagic1:amd64 (1:5.30-1+deb9u1) ...
Setting up libogg0:amd64 (1.3.2-1) ...
Setting up libvdeplug2 (2.3.2+r586-2.1) ...
Setting up libyajl2:amd64 (2.1.0-2+b3) ...
Setting up libx11-xcb1:amd64 (2:1.6.4-3) ...
Setting up libgmp10:amd64 (2:6.1.2+dfsg-1) ...
Setting up libpixman-1-0:amd64 (0.34.0-1) ...
Setting up libglib2.0-data (2.50.3-2) ...
Setting up libusb-1.0-0:amd64 (2:1.0.21-1) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
Setting up libaio1:amd64 (0.3.110-3) ...
Setting up libseccomp2:amd64 (2.3.1-2.1) ...
Setting up libapparmor1:amd64 (2.11.0-3) ...
Setting up xz-utils (5.2.2-1.2+b1) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up libsqlite3-0:amd64 (3.16.2-5) ...
Setting up libffi6:amd64 (3.2.1-6) ...
Setting up libxdmcp6:amd64 (1:1.1.2-3) ...
Setting up xml-core (0.17) ...
Setting up libsasl2-modules:amd64 (2.1.27~101-g0780600+dfsg-3) ...
Setting up libvorbis0a:amd64 (1.3.5-4) ...
Setting up x11-common (1:7.7+19) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libslang2:amd64 (2.3.1-5) ...
Setting up ipxe-qemu (1.0.0+git-20161027.b991c67-1) ...
Setting up xdg-user-dirs (0.15-2+b1) ...
Setting up libx11-data (2:1.6.4-3) ...
Setting up libxau6:amd64 (1:1.0.8-1) ...
Setting up libidn11:amd64 (1.33-1) ...
Setting up libmpdec2:amd64 (2.4.2-1) ...
Setting up libdbus-1-3:amd64 (1.10.22-0+deb9u1) ...
Setting up libbrlapi0.6:amd64 (5.4-7) ...
Setting up libwrap0:amd64 (7.6.q-26) ...
Setting up libfdt1:amd64 (1.4.2-1) ...
Setting up socat (1.7.3.1-2+deb9u1) ...
Setting up libglib2.0-0:amd64 (2.50.3-2) ...
No schema files found: doing nothing.
Setting up libpython3.5-stdlib:amd64 (3.5.3-1) ...
Setting up libflac8:amd64 (1.3.2-1) ...
Setting up genisoimage (9:1.1.11-3+b2) ...
Setting up libnss3:amd64 (2:3.26.2-1.1+deb9u1) ...
Setting up file (1:5.30-1+deb9u1) ...
Setting up tcpd (7.6.q-26) ...
Setting up libxen-4.8:amd64 (4.8.1-1+deb9u3) ...
Setting up libhogweed4:amd64 (3.3-1+b2) ...
Setting up libp11-kit0:amd64 (0.23.3-2) ...
Setting up libcacard0:amd64 (1:2.5.0-3) ...
Setting up libice6:amd64 (2:1.0.9-2) ...
Setting up shared-mime-info (1.8-1) ...
Setting up dbus (1.10.22-0+deb9u1) ...
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libvorbisenc2:amd64 (1.3.5-4) ...
Setting up libcaca0:amd64 (0.99.beta19-2+b2) ...
Setting up libxcb1:amd64 (1.12-1) ...
Setting up qemu-system-common (1:2.8+dfsg-6+deb9u3) ...
Setting up python3.5 (3.5.3-1) ...
Setting up libpython3-stdlib:amd64 (3.5.3-1) ...
Setting up libsm6:amd64 (2:1.2.2-1+b3) ...
Setting up libspice-server1:amd64 (0.12.8-2.1+deb9u1) ...
Setting up libgnutls30:amd64 (3.5.8-5+deb9u3) ...
Setting up libx11-6:amd64 (2:1.6.4-3) ...
Setting up qemu-utils (1:2.8+dfsg-6+deb9u3) ...
Setting up libsndfile1:amd64 (1.0.27-3) ...
Setting up libxext6:amd64 (2:1.3.3-1+b2) ...
Setting up libxi6:amd64 (2:1.7.9-1) ...
Setting up libxtst6:amd64 (2:1.2.3-1) ...
Setting up libpulse0:amd64 (10.0-1+deb9u1) ...
Setting up libsdl1.2debian:amd64 (1.2.15+dfsg1-4) ...
Setting up qemu-system-x86 (1:2.8+dfsg-6+deb9u3) ...
Setting up qemu-kvm (1:2.8+dfsg-6+deb9u3) ...
Setting up python3 (3.5.3-1) ...
Setting up dh-python (2.20170125) ...
Setting up python3-ipy (1:0.83-1) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
Processing triggers for sgml-base (1.29) ...
---> 013a13f42659
Removing intermediate container 2d0db8e2037b
Step 5 : ARG IMAGE
---> Running in 943ac6cf93c2
---> 80cd8f480103
Removing intermediate container 943ac6cf93c2
Step 6 : COPY $IMAGE* /
---> 90d9a2c89e90
Removing intermediate container ef4066090b20
Step 7 : COPY *.py /
---> b19ea7f9af7d
Removing intermediate container 3c1e78595124
Step 8 : EXPOSE 22 161/udp 830 5000 10000-10099
---> Running in 84fa7f38ae54
---> cad424492173
Removing intermediate container 84fa7f38ae54
Step 9 : HEALTHCHECK CMD /healthcheck.py
---> Running in 57de5de97616
---> 5586eea25875
Removing intermediate container 57de5de97616
Step 10 : ENTRYPOINT /launch.py
---> Running in 19c361f9d9c7
---> 6880f40ef1f0
Removing intermediate container 19c361f9d9c7
Successfully built 6880f40ef1f0
docker run --cidfile cidfile --privileged vr-csr:16.04.01 --trace --install
2017-10-16 01:33:41,850: launch TRACE install mode
2017-10-16 01:33:41,851: launch INFO Installing CSR
2017-10-16 01:33:41,851: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:33:41,852: vrnetlab INFO Starting CSR_vm
2017-10-16 01:33:41,852: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-cdrom', '/config.iso', '-device', 'pci-bridge,chassis_nr=1,id=pci.1', '-device', 'e1000,netdev=p00,mac=52:54:00:56:ac:00', '-netdev', 'user,id=p00,net=10.0.0.0/24,tftp=/tftpboot,hostfwd=tcp::2022-10.0.0.15:22,hostfwd=udp::2161-10.0.0.15:161,hostfwd=tcp::2830-10.0.0.15:830', '-device', 'e1000,netdev=p01,mac=52:54:00:fc:28:01,bus=pci.1,addr=0x2', '-netdev', 'socket,id=p01,listen=:10001', '-device', 'e1000,netdev=p02,mac=52:54:00:e0:69:02,bus=pci.1,addr=0x3', '-netdev', 'socket,id=p02,listen=:10002', '-device', 'e1000,netdev=p03,mac=52:54:00:94:f6:03,bus=pci.1,addr=0x4', '-netdev', 'socket,id=p03,listen=:10003', '-device', 'e1000,netdev=p04,mac=52:54:00:c9:89:04,bus=pci.1,addr Booting 'CSR1000v - packages.conf'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
calculated 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
expected 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
package header rev 3 structure detected
Calculating SHA-1 hash...
2017-10-16 01:33:59,879: launch TRACE OUTPUT: done
SHA-1 hash:
calculated b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
expected b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
Package type:0x7531, flags:0x0
[Linux-bzImage, setup=0x3c00, size=0x2142994]
2017-10-16 01:34:03,884: launch TRACE OUTPUT: [isord @ 0x7e330000, 0x1cbf444 bytes]
2017-10-16 01:34:13,895: launch TRACE OUTPUT: %IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 1 contained errors which were auto-corrected.
2017-10-16 01:34:15,898: launch TRACE OUTPUT: %IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 8 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 9 contained errors which were auto-corrected.
2017-10-16 01:34:17,901: launch TRACE OUTPUT: %IOSXEBOOT-4-BOOT_SRC: (local/local): TarFilePath:
2017-10-16 01:35:25,977: launch TRACE OUTPUT:
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software [Everest], CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.4.1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sun 27-Nov-16 13:02 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
2017-10-16 01:35:29,981: launch TRACE OUTPUT: % failed to initialize nvram
2017-10-16 01:35:33,985: launch TRACE OUTPUT:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CSR1000V (VXE) processor (revision VXE) with 2052375K/3075K bytes of memory.
Processor board ID 9CGD7B79C77
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3985132K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of at webui:.
.Done!
SETUP: new interface GigabitEthernet1 placed in "shutdown" state
SETUP: new interface GigabitEthernet2 placed in "shutdown" state
SETUP: new interface GigabitEthernet3 placed in "shutdown" state
SETUP: new interface GigabitEthernet4 placed in "shutdown" state
SETUP: new interface GigabitEthernet5 placed in "shutdown" state
SETUP: new interface GigabitEthernet6 placed in "shutdown" state
2017-10-16 01:35:35,988: launch TRACE OUTPUT:
SETUP: new interface GigabitEthernet7 placed in "shutdown" state
SETUP: new interface GigabitEthernet8 placed in "shutdown" state
SETUP: new interface GigabitEthernet9 placed in "shutdown" state
SETUP: new interface GigabitEthernet10 placed in "shutdown" state
2017-10-16 01:36:09,496: launch INFO Installation complete
docker commit --change='ENTRYPOINT ["/launch.py"]' $(cat cidfile) vr-csr:16.04.01
sha256:7c644be0d5ec8934e46268c9c0525b2ed7fcaaad914a92125d21f28b027cdeaf
docker rm -f $(cat cidfile)
e39b623532aa926065a27eec3fcc1b295261ae40793d0c165fd05a4624042f65
make[1]: Leaving directory '/home/jabelk/mytestingspace/vrnetlab/csr'
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
vr-csr 16.04.01 7c644be0d5ec About a minute ago 1.773 GB
vr-bgp latest 46d117de4d36 About an hour ago 657.2 MB
vr-xcon latest e049cbacc607 About an hour ago 163.3 MB
vrnetlab/vr-xcon latest 9cf2e9630c8d 11 days ago 152.2 MB
debian stable 175074065266 4 weeks ago 100.1 MB
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker run -d --privileged --name my-csr-router vr-csr
Unable to find image 'vr-csr:latest' locally
Pulling repository docker.io/library/vr-csr
docker: Error: image library/vr-csr:latest not found.
See 'docker run --help'.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker run -d --privileged --name my-csr-router vr-csr:16.04.01
bfc7be7ef5b3f44e97b2ee36fa119978c54a4ccad81f1e7091286cc0ba57df36
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
bfc7be7ef5b3 vr-csr:16.04.01 "/launch.py" 9 seconds ago Up 8 seconds (health: starting) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
bfc7be7ef5b3 vr-csr:16.04.01 "/launch.py" 42 seconds ago Up 41 seconds (health: starting) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
bfc7be7ef5b3 vr-csr:16.04.01 "/launch.py" 55 seconds ago Up 54 seconds (health: starting) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab/csr$ cd ..
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ . vrnetlab.sh
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vr_mgmt_ip
docker: "inspect" requires a minimum of 1 argument.
See 'docker inspect --help'.
Usage: docker inspect [OPTIONS] CONTAINER|IMAGE|TASK [CONTAINER|IMAGE|TASK...]
Return low-level information on a container, image or task
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vr_mgmt_ip my-csr-router
172.17.0.2
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vrcons my-csr-router
Trying 172.17.0.2...
Connected to 172.17.0.2.
Escape character is '^]'.
^]
telnet> exit
?Invalid command
telnet> ?
Commands may be abbreviated. Commands are:
close close current connection
logout forcibly logout remote user and close the connection
display display operating parameters
mode try to enter line or character mode ('mode ?' for more)
open connect to a site
quit exit telnet
send transmit special characters ('send ?' for more)
set set operating parameters ('set ?' for more)
unset unset operating parameters ('unset ?' for more)
status print status information
toggle toggle operating parameters ('toggle ?' for more)
slc set treatment of special characters
z suspend telnet
environ change environment variables ('environ ?' for more)
telnet> close
Connection closed.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vr_mgmt_ip my-csr-router
172.17.0.2
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vr_mgmt_ip
docker: "inspect" requires a minimum of 1 argument.
See 'docker inspect --help'.
Usage: docker inspect [OPTIONS] CONTAINER|IMAGE|TASK [CONTAINER|IMAGE|TASK...]
Return low-level information on a container, image or task
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
bfc7be7ef5b3 vr-csr:16.04.01 "/launch.py" 2 minutes ago Up 2 minutes (unhealthy) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
bfc7be7ef5b3 vr-csr:16.04.01 "/launch.py" 2 minutes ago Up 2 minutes (healthy) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker kill my-csr-router
my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker rm my-csr-router
my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ sudo docker run -d --privileged --name my-csr-router vr-csr
Unable to find image 'vr-csr:latest' locally
Pulling repository docker.io/library/vr-csr
docker: Error: image library/vr-csr:latest not found.
See 'docker run --help'.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker run -d --privileged --name my-csr-router vr-csr:16.04.01
574a8fcf6839ae663a283f363224060b6608c4dfd5520818aad2171f9e213a42
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
574a8fcf6839 vr-csr:16.04.01 "/launch.py" 6 seconds ago Up 5 seconds (health: starting) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
574a8fcf6839 vr-csr:16.04.01 "/launch.py" 3 minutes ago Up 3 minutes (unhealthy) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
574a8fcf6839 vr-csr:16.04.01 "/launch.py" 4 minutes ago Up 4 minutes (unhealthy) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vrssh my-csr-router
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
SHA256:Ki/dpbH/XmCEFq3yj6Aaz+zw1QNUPIPQkf2a1X+9ZDw.
Please contact your system administrator.
Add correct host key in /home/jabelk/.ssh/known_hosts to get rid of this message.
Offending RSA key in /home/jabelk/.ssh/known_hosts:1
remove with:
ssh-keygen -f "/home/jabelk/.ssh/known_hosts" -R 172.17.0.2
Password authentication is disabled to avoid man-in-the-middle attacks.
Keyboard-interactive authentication is disabled to avoid man-in-the-middle attacks.
Permission denied (publickey,keyboard-interactive,password).
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ ssh -oStrictHostKeyChecking=no 172.17.0.2 -l vrnetlab
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
SHA256:Ki/dpbH/XmCEFq3yj6Aaz+zw1QNUPIPQkf2a1X+9ZDw.
Please contact your system administrator.
Add correct host key in /home/jabelk/.ssh/known_hosts to get rid of this message.
Offending RSA key in /home/jabelk/.ssh/known_hosts:1
remove with:
ssh-keygen -f "/home/jabelk/.ssh/known_hosts" -R 172.17.0.2
Password authentication is disabled to avoid man-in-the-middle attacks.
Keyboard-interactive authentication is disabled to avoid man-in-the-middle attacks.
Permission denied (publickey,keyboard-interactive,password).
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vrssh my-csr-router
Warning: Permanently added '172.17.0.2' (RSA) to the list of known hosts.
Permission denied, please try again.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ ssh-keygen -f "/home/jabelk/.ssh/known_hosts" -R 172.17.0.2
Host 172.17.0.2 not found in /home/jabelk/.ssh/known_hosts
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ sh -oStrictHostKeyChecking=no 172.17.0.2 -l vrnetlab
sh: 0: Illegal option -o 172.17.0.2
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ ssh -oStrictHostKeyChecking=no 172.17.0.2 -l vrnetlab
Warning: Permanently added '172.17.0.2' (RSA) to the list of known hosts.
vrnetlab@172.17.0.2's password:
Permission denied, please try again.
vrnetlab@172.17.0.2's password:
Connection to 172.17.0.2 closed by remote host.
Connection to 172.17.0.2 closed.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vrssh my-csr-router
Permission denied, please try again.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ vrcons my-csr-router
Trying 172.17.0.2...
Connected to 172.17.0.2.
Escape character is '^]'.
^]
telnet> ?
Commands may be abbreviated. Commands are:
close close current connection
logout forcibly logout remote user and close the connection
display display operating parameters
mode try to enter line or character mode ('mode ?' for more)
open connect to a site
quit exit telnet
send transmit special characters ('send ?' for more)
set set operating parameters ('set ?' for more)
unset unset operating parameters ('unset ?' for more)
status print status information
toggle toggle operating parameters ('toggle ?' for more)
slc set treatment of special characters
z suspend telnet
environ change environment variables ('environ ?' for more)
telnet> close
Connection closed.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
574a8fcf6839 vr-csr:16.04.01 "/launch.py" 11 minutes ago Up 11 minutes (unhealthy) 22/tcp, 830/tcp, 5000/tcp, 10000-10099/tcp, 161/udp my-csr-router
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker run -d --privileged --name newcsr vr-csr:16.04.01 --username devops --password devops --trace --install
25bcb86ae045092989164dbb2609e40879612816feaee471e64770d307c93654
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker run -df --details --privileged --name newcsr2 vr-csr:16.04.01 --username devops --password devops --trace --install
unknown shorthand flag: 'f' in -f
See 'docker run --help'.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker run -d --details --privileged --name newcsr2 vr-csr:16.04.01 --username devops --password devops --trace --install
unknown flag: --details
See 'docker run --help'.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs mycsr
Error: No such container: mycsr
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs newcsr
2017-10-16 01:56:07,517: launch TRACE install mode
2017-10-16 01:56:07,518: launch INFO Installing CSR
2017-10-16 01:56:07,519: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:56:07,519: vrnetlab INFO Starting CSR_vm
2017-10-16 01:56:07,519: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-cdrom', '/config.iso', '-device', 'pci-bridge,chassis_nr=1,i Booting 'CSR1000v - packages.conf'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
calculated 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
expected 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
package header rev 3 structure detected
Calculating SHA-1 hash...
2017-10-16 01:56:27,552: launch TRACE OUTPUT: done
SHA-1 hash:
calculated b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
expected b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
Package type:0x7531, flags:0x0
[Linux-bzImage, setup=0x3c00, size=0x2142994]
2017-10-16 01:56:31,556: launch TRACE OUTPUT: [isord @ 0x7e330000, 0x1cbf444 bytes]
2017-10-16 01:56:43,569: launch TRACE OUTPUT: %IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 8 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 9 contained errors which were auto-corrected.
2017-10-16 01:56:45,572: launch TRACE OUTPUT: %IOSXEBOOT-4-BOOT_SRC: (local/local): TarFilePath:
2017-10-16 01:57:43,634: launch TRACE OUTPUT:
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software [Everest], CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.4.1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sun 27-Nov-16 13:02 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
2017-10-16 01:57:45,636: launch TRACE OUTPUT: % failed to initialize nvram
2017-10-16 01:57:49,638: launch TRACE OUTPUT:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CSR1000V (VXE) proc
2017-10-16 01:57:51,641: launch TRACE OUTPUT: essor (revision VXE) with 2052375K/3075K bytes of memory.
Processor board ID 9CGD7B79C77
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3985132K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of at webui:.
.Done!
SETUP: new interface GigabitEthernet1 placed in "shutdown" state
SETUP: new interface GigabitEthernet2 placed in "shutdown" state
SETUP: new interface GigabitEthernet3 placed in "shutdown" state
SETUP: new interface GigabitEthernet4 placed in "shutdown" state
SETUP: new interface GigabitEthernet5 placed in "shutdown" state
SETUP: new interface GigabitEthernet6 placed in "shutdown" state
SETUP: new interface GigabitEthernet7 placed in "shutdown" state
SETUP: new interface GigabitEthernet8 placed in "shutdown" state
SETUP: new interface GigabitEthernet9 placed in "shutdown" state
SETUP: new interface GigabitEthernet10 placed in "shutdown" state
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs my-csr-router
2017-10-16 01:43:02,432: vrnetlab DEBUG Starting vrnetlab CSR
2017-10-16 01:43:02,433: vrnetlab DEBUG VMs: [<__main__.CSR_vm object at 0x7f067eccc5c0>]
2017-10-16 01:43:02,434: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:43:02,434: vrnetlab INFO Starting CSR_vm
2017-10-16 01:43:02,435: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-device', 'pci-bridge,chassis_nr=1,id=pci.1', '-device', 'e1000,netdev=p00,mac=52:54:00:55:2d:00', '-netdev', 'user,id=p00,net=10.0.0.0/24,tftp=/tftpboot,hostfwd=tcp::2022-10.0.0.15:22,hostfwd=udp::2161-10.0.0.15:161,hostfwd=tcp::2830-10.0.0.15:830', '-device', 'e1000,netdev=p01,mac=52:54:00:0a:9f:01,bus=pci.1,addr=0x2', '-netdev', 'socket,id=p01,listen=:10001', '-device', 'e1000,netdev=p02,mac=52:54:00:8c:a6:02,bus=pci.1,addr=0x3', '-netdev', 'socket,id=p02,listen=:10002', '-device', 'e1000,netdev=p03,mac=52:54:00:f8:0d:03,bus=pci.1,addr=0x4', '-netdev', 'socket,id=p03,listen=:10003', '-device', 'e1000,netdev=p04,mac=52:54:00:e1:f0:04,bus=pci.1,addr=0x5', '-netdev', 'socket,id=p04,listen=:10004', '-device', 'e1000,netdev=p05,mac=52:54:00:16:53:05,bus=pci.1,addr=0x6', '-netdev', 'socket,id=p05,listen=:10005', '-device', 'e1000,netdev=p06,mac=52:54:00:c5:7b:06,bus=pci.1,addr=0x7', '-netdev', 'socket,id=p06,listen=:10006', '-device', 'e1000,netdev=p07,mac=52:54:00:20:e8:07,bus=pci.1,addr=0x8', '-netdev', 'socket,id=p07,listen=:10007', '-device', 'e1000,netdev=p08,mac=52:54:00:cf:46:08,bus=pci.1,addr=0x9', '-netdev', 'socket,id=p08,listen=:10008', '-device', 'e1000,netdev=p09,mac=52:54:00:e4:aa:09,bus=pci.1,addr=0xa', '-netdev', 'socket,id=p09,listen=:10009']
2017-10-16 01:45:19,879: launch DEBUG matched, Press RETURN to get started.
2017-10-16 01:45:19,879: vrnetlab DEBUG writing to serial console:
2017-10-16 01:45:19,879: launch INFO applying bootstrap configuration
2017-10-16 01:45:19,879: vrnetlab DEBUG writing to serial console:
2017-10-16 01:45:19,924: vrnetlab DEBUG writing to serial console: enable
2017-10-16 01:45:19,924: vrnetlab DEBUG writing to serial console: configure terminal
2017-10-16 01:45:19,971: vrnetlab DEBUG writing to serial console: hostname csr1000v
2017-10-16 01:45:19,972: vrnetlab DEBUG writing to serial console: username vrnetlab privilege 15 password VR-netlab9
2017-10-16 01:45:20,053: vrnetlab DEBUG writing to serial console: ip domain-name example.com
2017-10-16 01:45:20,105: vrnetlab DEBUG writing to serial console: crypto key generate rsa modulus 2048
2017-10-16 01:45:20,147: vrnetlab DEBUG writing to serial console: interface GigabitEthernet1
2017-10-16 01:45:21,873: vrnetlab DEBUG writing to serial console: ip address 10.0.0.15 255.255.255.0
2017-10-16 01:45:21,915: vrnetlab DEBUG writing to serial console: no shut
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ date
Sun Oct 15 18:58:42 PDT 2017
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs newcsr
2017-10-16 01:56:07,517: launch TRACE install mode
2017-10-16 01:56:07,518: launch INFO Installing CSR
2017-10-16 01:56:07,519: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:56:07,519: vrnetlab INFO Starting CSR_vm
2017-10-16 01:56:07,519: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-cdrom', '/config.iso', '-device', 'pci-bridge,chassis_nr=1,i Booting 'CSR1000v - packages.conf'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
calculated 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
expected 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
package header rev 3 structure detected
Calculating SHA-1 hash...
2017-10-16 01:56:27,552: launch TRACE OUTPUT: done
SHA-1 hash:
calculated b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
expected b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
Package type:0x7531, flags:0x0
[Linux-bzImage, setup=0x3c00, size=0x2142994]
2017-10-16 01:56:31,556: launch TRACE OUTPUT: [isord @ 0x7e330000, 0x1cbf444 bytes]
2017-10-16 01:56:43,569: launch TRACE OUTPUT: %IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 8 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 9 contained errors which were auto-corrected.
2017-10-16 01:56:45,572: launch TRACE OUTPUT: %IOSXEBOOT-4-BOOT_SRC: (local/local): TarFilePath:
2017-10-16 01:57:43,634: launch TRACE OUTPUT:
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software [Everest], CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.4.1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sun 27-Nov-16 13:02 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
2017-10-16 01:57:45,636: launch TRACE OUTPUT: % failed to initialize nvram
2017-10-16 01:57:49,638: launch TRACE OUTPUT:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CSR1000V (VXE) proc
2017-10-16 01:57:51,641: launch TRACE OUTPUT: essor (revision VXE) with 2052375K/3075K bytes of memory.
Processor board ID 9CGD7B79C77
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3985132K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of at webui:.
.Done!
SETUP: new interface GigabitEthernet1 placed in "shutdown" state
SETUP: new interface GigabitEthernet2 placed in "shutdown" state
SETUP: new interface GigabitEthernet3 placed in "shutdown" state
SETUP: new interface GigabitEthernet4 placed in "shutdown" state
SETUP: new interface GigabitEthernet5 placed in "shutdown" state
SETUP: new interface GigabitEthernet6 placed in "shutdown" state
SETUP: new interface GigabitEthernet7 placed in "shutdown" state
SETUP: new interface GigabitEthernet8 placed in "shutdown" state
SETUP: new interface GigabitEthernet9 placed in "shutdown" state
SETUP: new interface GigabitEthernet10 placed in "shutdown" state
2017-10-16 01:58:26,688: launch INFO Installation complete
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs my-csr-router
2017-10-16 01:43:02,432: vrnetlab DEBUG Starting vrnetlab CSR
2017-10-16 01:43:02,433: vrnetlab DEBUG VMs: [<__main__.CSR_vm object at 0x7f067eccc5c0>]
2017-10-16 01:43:02,434: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:43:02,434: vrnetlab INFO Starting CSR_vm
2017-10-16 01:43:02,435: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-device', 'pci-bridge,chassis_nr=1,id=pci.1', '-device', 'e1000,netdev=p00,mac=52:54:00:55:2d:00', '-netdev', 'user,id=p00,net=10.0.0.0/24,tftp=/tftpboot,hostfwd=tcp::2022-10.0.0.15:22,hostfwd=udp::2161-10.0.0.15:161,hostfwd=tcp::2830-10.0.0.15:830', '-device', 'e1000,netdev=p01,mac=52:54:00:0a:9f:01,bus=pci.1,addr=0x2', '-netdev', 'socket,id=p01,listen=:10001', '-device', 'e1000,netdev=p02,mac=52:54:00:8c:a6:02,bus=pci.1,addr=0x3', '-netdev', 'socket,id=p02,listen=:10002', '-device', 'e1000,netdev=p03,mac=52:54:00:f8:0d:03,bus=pci.1,addr=0x4', '-netdev', 'socket,id=p03,listen=:10003', '-device', 'e1000,netdev=p04,mac=52:54:00:e1:f0:04,bus=pci.1,addr=0x5', '-netdev', 'socket,id=p04,listen=:10004', '-device', 'e1000,netdev=p05,mac=52:54:00:16:53:05,bus=pci.1,addr=0x6', '-netdev', 'socket,id=p05,listen=:10005', '-device', 'e1000,netdev=p06,mac=52:54:00:c5:7b:06,bus=pci.1,addr=0x7', '-netdev', 'socket,id=p06,listen=:10006', '-device', 'e1000,netdev=p07,mac=52:54:00:20:e8:07,bus=pci.1,addr=0x8', '-netdev', 'socket,id=p07,listen=:10007', '-device', 'e1000,netdev=p08,mac=52:54:00:cf:46:08,bus=pci.1,addr=0x9', '-netdev', 'socket,id=p08,listen=:10008', '-device', 'e1000,netdev=p09,mac=52:54:00:e4:aa:09,bus=pci.1,addr=0xa', '-netdev', 'socket,id=p09,listen=:10009']
2017-10-16 01:45:19,879: launch DEBUG matched, Press RETURN to get started.
2017-10-16 01:45:19,879: vrnetlab DEBUG writing to serial console:
2017-10-16 01:45:19,879: launch INFO applying bootstrap configuration
2017-10-16 01:45:19,879: vrnetlab DEBUG writing to serial console:
2017-10-16 01:45:19,924: vrnetlab DEBUG writing to serial console: enable
2017-10-16 01:45:19,924: vrnetlab DEBUG writing to serial console: configure terminal
2017-10-16 01:45:19,971: vrnetlab DEBUG writing to serial console: hostname csr1000v
2017-10-16 01:45:19,972: vrnetlab DEBUG writing to serial console: username vrnetlab privilege 15 password VR-netlab9
2017-10-16 01:45:20,053: vrnetlab DEBUG writing to serial console: ip domain-name example.com
2017-10-16 01:45:20,105: vrnetlab DEBUG writing to serial console: crypto key generate rsa modulus 2048
2017-10-16 01:45:20,147: vrnetlab DEBUG writing to serial console: interface GigabitEthernet1
2017-10-16 01:45:21,873: vrnetlab DEBUG writing to serial console: ip address 10.0.0.15 255.255.255.0
2017-10-16 01:45:21,915: vrnetlab DEBUG writing to serial console: no shut
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ docker logs newcsr
2017-10-16 01:56:07,517: launch TRACE install mode
2017-10-16 01:56:07,518: launch INFO Installing CSR
2017-10-16 01:56:07,519: vrnetlab DEBUG VM not started; starting!
2017-10-16 01:56:07,519: vrnetlab INFO Starting CSR_vm
2017-10-16 01:56:07,519: vrnetlab DEBUG ['qemu-system-x86_64', '-enable-kvm', '-display', 'none', '-machine', 'pc', '-monitor', 'tcp:0.0.0.0:4000,server,nowait', '-m', '4096', '-serial', 'telnet:0.0.0.0:5000,server,nowait', '-drive', 'if=ide,file=/csr1000v-universalk9.16.04.01-serial-overlay.qcow2', '-cdrom', '/config.iso', '-device', 'pci-bridge,chassis_nr=1,i Booting 'CSR1000v - packages.conf'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
calculated 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
expected 7629cd4d:f0c07a83:7c09e88f:7d9c831f:9b62a4f0
package header rev 3 structure detected
Calculating SHA-1 hash...
2017-10-16 01:56:27,552: launch TRACE OUTPUT: done
SHA-1 hash:
calculated b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
expected b23c2262:69c0ab9a:390aae78:2bf559b7:6dd804a2
Package type:0x7531, flags:0x0
[Linux-bzImage, setup=0x3c00, size=0x2142994]
2017-10-16 01:56:31,556: launch TRACE OUTPUT: [isord @ 0x7e330000, 0x1cbf444 bytes]
2017-10-16 01:56:43,569: launch TRACE OUTPUT: %IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 8 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (local/local): bootflash 9 contained errors which were auto-corrected.
2017-10-16 01:56:45,572: launch TRACE OUTPUT: %IOSXEBOOT-4-BOOT_SRC: (local/local): TarFilePath:
2017-10-16 01:57:43,634: launch TRACE OUTPUT:
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software [Everest], CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.4.1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sun 27-Nov-16 13:02 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
2017-10-16 01:57:45,636: launch TRACE OUTPUT: % failed to initialize nvram
2017-10-16 01:57:49,638: launch TRACE OUTPUT:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CSR1000V (VXE) proc
2017-10-16 01:57:51,641: launch TRACE OUTPUT: essor (revision VXE) with 2052375K/3075K bytes of memory.
Processor board ID 9CGD7B79C77
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3985132K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of at webui:.
.Done!
SETUP: new interface GigabitEthernet1 placed in "shutdown" state
SETUP: new interface GigabitEthernet2 placed in "shutdown" state
SETUP: new interface GigabitEthernet3 placed in "shutdown" state
SETUP: new interface GigabitEthernet4 placed in "shutdown" state
SETUP: new interface GigabitEthernet5 placed in "shutdown" state
SETUP: new interface GigabitEthernet6 placed in "shutdown" state
SETUP: new interface GigabitEthernet7 placed in "shutdown" state
SETUP: new interface GigabitEthernet8 placed in "shutdown" state
SETUP: new interface GigabitEthernet9 placed in "shutdown" state
SETUP: new interface GigabitEthernet10 placed in "shutdown" state
2017-10-16 01:58:26,688: launch INFO Installation complete
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$ sshpass -p VR-netlab9 ssh -oStrictHostKeyChecking=no 172.17.0.2 -l vrnetlab -vvvv
OpenSSH_7.2p2 Ubuntu-4ubuntu2.2, OpenSSL 1.0.2g 1 Mar 2016
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "172.17.0.2" port 22
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to 172.17.0.2 [172.17.0.2] port 22.
debug1: Connection established.
debug1: identity file /home/jabelk/.ssh/id_rsa type 1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/jabelk/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu2.2
debug1: Remote protocol version 1.99, remote software version Cisco-1.25
debug1: match: Cisco-1.25 pat Cisco-1.* compat 0x60000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to 172.17.0.2:22 as 'vrnetlab'
debug3: hostkeys_foreach: reading file "/home/jabelk/.ssh/known_hosts"
debug3: record_hostkey: found key type RSA in file /home/jabelk/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 172.17.0.2
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,ext-info-c
debug2: host key algorithms: ssh-rsa-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,aes192-cbc,aes256-cbc,3des-cbc
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,aes192-cbc,aes256-cbc,3des-cbc
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com,zlib
debug2: compression stoc: none,zlib@openssh.com,zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1
debug2: host key algorithms: ssh-rsa
debug2: ciphers ctos: aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
debug2: ciphers stoc: aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
debug2: MACs ctos: hmac-sha1,hmac-sha1-96
debug2: MACs stoc: hmac-sha1,hmac-sha1-96
debug2: compression ctos: none
debug2: compression stoc: none
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: diffie-hellman-group-exchange-sha1
debug1: kex: host key algorithm: ssh-rsa
debug1: kex: server->client cipher: aes128-ctr MAC: hmac-sha1 compression: none
debug1: kex: client->server cipher: aes128-ctr MAC: hmac-sha1 compression: none
debug3: send packet: type 34
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(2048<4096<8192) sent
debug3: receive packet: type 31
debug1: got SSH2_MSG_KEX_DH_GEX_GROUP
debug2: bits set: 1999/4096
debug3: send packet: type 32
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug3: receive packet: type 33
debug1: got SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: ssh-rsa SHA256:Ki/dpbH/XmCEFq3yj6Aaz+zw1QNUPIPQkf2a1X+9ZDw
debug3: hostkeys_foreach: reading file "/home/jabelk/.ssh/known_hosts"
debug3: record_hostkey: found key type RSA in file /home/jabelk/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 172.17.0.2
debug1: Host '172.17.0.2' is known and matches the RSA host key.
debug1: Found key in /home/jabelk/.ssh/known_hosts:1
debug2: bits set: 2063/4096
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug2: set_newkeys: mode 0
debug1: rekey after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS received
debug2: key: /home/jabelk/.ssh/id_rsa (0x56123a306640), agent
debug2: key: /home/jabelk/.ssh/id_dsa ((nil))
debug2: key: /home/jabelk/.ssh/id_ecdsa ((nil))
debug2: key: /home/jabelk/.ssh/id_ed25519 ((nil))
debug3: send packet: type 5
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,keyboard-interactive,password
debug3: start over, passed a different list publickey,keyboard-interactive,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/jabelk/.ssh/id_rsa
debug3: send_pubkey_test
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,keyboard-interactive,password
debug1: Trying private key: /home/jabelk/.ssh/id_dsa
debug3: no such identity: /home/jabelk/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /home/jabelk/.ssh/id_ecdsa
debug3: no such identity: /home/jabelk/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /home/jabelk/.ssh/id_ed25519
debug3: no such identity: /home/jabelk/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug3: send packet: type 50
debug2: we sent a keyboard-interactive packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,keyboard-interactive,password
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
debug3: send packet: type 50
debug2: we sent a password packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,keyboard-interactive,password
Permission denied, please try again.
jabelk@jabelk-Meerkat:~/mytestingspace/vrnetlab$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment