Skip to content

Instantly share code, notes, and snippets.

@jakob-tsd

jakob-tsd/dmesg.txt

Created April 24, 2018 12:06
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save jakob-tsd/33cf395e355bf9bb6956c36438d999e7 to your computer and use it in GitHub Desktop.
Save jakob-tsd/33cf395e355bf9bb6956c36438d999e7 to your computer and use it in GitHub Desktop.
Download ZIP
RK3399-Q7 Linux v4.17-rc2
Raw
dmesg.txt
root@rk3399-q7:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.17.0-rc2 (junterwurzacher@blau) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #72 SMP PREEMPT Tue Apr 24 14:04:24 CEST 2018
[ 0.000000] Machine model: Theobroma Systems RK3399-Q7 SoM
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7efade80-0x7efaf97f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 523776
[ 0.000000] DMA32 zone: 8184 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 523776 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x41c with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @ (ptrval) s57240 r8192 d28776 u94208
[ 0.000000] pcpu-alloc: s57240 r8192 d28776 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mmcblk1p1 rw drm.debug=0xff
[ 0.000000] Memory: 2024824K/2095104K available (12988K kernel code, 1030K rwdata, 4772K rodata, 896K init, 431K bss, 53896K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7c480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000007c440000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000007c450000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001547] Console: colour dummy device 80x25
[ 0.002473] console [tty0] enabled
[ 0.002556] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002597] pid_max: default: 32768 minimum: 301
[ 0.002719] Security Framework initialized
[ 0.003827] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004377] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004449] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.004493] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.023841] ASID allocator initialised with 32768 entries
[ 0.031841] Hierarchical SRCU implementation.
[ 0.042679] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.043080] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.043422] EFI services will not be available.
[ 0.051932] smp: Bringing up secondary CPUs ...
[ 0.080132] Detected VIPT I-cache on CPU1
[ 0.080168] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.080210] CPU1: using LPI pending table @0x000000007bd50000
[ 0.080259] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.108207] Detected VIPT I-cache on CPU2
[ 0.108234] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.108274] CPU2: using LPI pending table @0x000000007bd70000
[ 0.108308] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.136300] Detected VIPT I-cache on CPU3
[ 0.136328] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.136367] CPU3: using LPI pending table @0x000000007bdc0000
[ 0.136399] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.164410] CPU features: enabling workaround for EL2 vector hardening
[ 0.164418] Detected PIPT I-cache on CPU4
[ 0.164451] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.164516] CPU4: using LPI pending table @0x000000007bdf0000
[ 0.164551] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.192502] Detected PIPT I-cache on CPU5
[ 0.192528] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.192591] CPU5: using LPI pending table @0x000000007be00000
[ 0.192621] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.192732] smp: Brought up 1 node, 6 CPUs
[ 0.193105] SMP: Total of 6 processors activated.
[ 0.193126] CPU features: detected: GIC system register CPU interface
[ 0.193150] CPU features: detected: 32-bit EL0 Support
[ 0.195949] CPU: All CPU(s) started at EL2
[ 0.195998] alternatives: patching kernel code
[ 0.198173] devtmpfs: initialized
[ 0.211967] Built 1 zonelists, mobility grouping on. Total pages: 510302
[ 0.212004] Policy zone: DMA32
[ 0.213619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.213765] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.214049] xor: measuring software checksum speed
[ 0.252586] 8regs : 1152.000 MB/sec
[ 0.292667] 8regs_prefetch: 1027.000 MB/sec
[ 0.332746] 32regs : 1364.000 MB/sec
[ 0.372826] 32regs_prefetch: 1190.000 MB/sec
[ 0.372847] xor: using function: 32regs (1364.000 MB/sec)
[ 0.372878] pinctrl core: initialized pinctrl subsystem
[ 0.374178] DMI not present or invalid.
[ 0.374581] NET: Registered protocol family 16
[ 0.375374] audit: initializing netlink subsys (disabled)
[ 0.375547] audit: type=2000 audit(0.372:1): state=initialized audit_enabled=0 res=1
[ 0.378020] cpuidle: using governor menu
[ 0.378271] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.378314] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.379692] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.379867] Serial: AMBA PL011 UART driver
[ 0.431839] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.432474] cryptd: max_cpu_qlen set to 1000
[ 0.497440] raid6: int64x1 gen() 204 MB/s
[ 0.565496] raid6: int64x1 xor() 221 MB/s
[ 0.633769] raid6: int64x2 gen() 329 MB/s
[ 0.701893] raid6: int64x2 xor() 298 MB/s
[ 0.770077] raid6: int64x4 gen() 494 MB/s
[ 0.838239] raid6: int64x4 xor() 377 MB/s
[ 0.906385] raid6: int64x8 gen() 550 MB/s
[ 0.974525] raid6: int64x8 xor() 364 MB/s
[ 1.042769] raid6: neonx1 gen() 363 MB/s
[ 1.110891] raid6: neonx1 xor() 424 MB/s
[ 1.179113] raid6: neonx2 gen() 582 MB/s
[ 1.247232] raid6: neonx2 xor() 602 MB/s
[ 1.315424] raid6: neonx4 gen() 753 MB/s
[ 1.383605] raid6: neonx4 xor() 720 MB/s
[ 1.451766] raid6: neonx8 gen() 797 MB/s
[ 1.519969] raid6: neonx8 xor() 752 MB/s
[ 1.519990] raid6: using algorithm neonx8 gen() 797 MB/s
[ 1.520010] raid6: .... xor() 752 MB/s, rmw enabled
[ 1.520030] raid6: using neon recovery algorithm
[ 1.520355] ACPI: Interpreter disabled.
[ 1.522433] vcc1v2_phy: supplied by vcc5v0_sys
[ 1.522539] vcc3v3_sys: supplied by vcc5v0_sys
[ 1.522611] vcc5v0_host: supplied by vcc5v0_sys
[ 1.522797] vcc3v3_baseboard: supplied by dc_12v
[ 1.523118] vcc5v0_baseboard: supplied by dc_12v
[ 1.523832] vdda_codec: supplied by vcc5v0_baseboard
[ 1.524192] vddd_codec: supplied by vcc5v0_baseboard
[ 1.525153] rk_iommu ff8f3f00.iommu: Failed to get clk 'iface': -2
[ 1.525316] rk_iommu: probe of ff8f3f00.iommu failed with error -2
[ 1.525484] rk_iommu ff903f00.iommu: Failed to get clk 'iface': -2
[ 1.525643] rk_iommu: probe of ff903f00.iommu failed with error -2
[ 1.525934] vgaarb: loaded
[ 1.526367] SCSI subsystem initialized
[ 1.526674] libata version 3.00 loaded.
[ 1.527104] usbcore: registered new interface driver usbfs
[ 1.527197] usbcore: registered new interface driver hub
[ 1.527333] usbcore: registered new device driver usb
[ 1.527793] media: Linux media interface: v0.10
[ 1.527868] Linux video capture interface: v2.00
[ 1.528083] pps_core: LinuxPPS API ver. 1 registered
[ 1.528108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.528167] PTP clock support registered
[ 1.528555] EDAC MC: Ver: 3.0.0
[ 1.529217] Advanced Linux Sound Architecture Driver Initialized.
[ 1.529792] Bluetooth: Core ver 2.22
[ 1.529860] NET: Registered protocol family 31
[ 1.529882] Bluetooth: HCI device and connection manager initialized
[ 1.529911] Bluetooth: HCI socket layer initialized
[ 1.529935] Bluetooth: L2CAP socket layer initialized
[ 1.529984] Bluetooth: SCO socket layer initialized
[ 1.530606] clocksource: Switched to clocksource arch_sys_counter
[ 1.530834] VFS: Disk quotas dquot_6.6.0
[ 1.530928] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.531158] pnp: PnP ACPI: disabled
[ 1.540888] NET: Registered protocol family 2
[ 1.541531] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 1.541764] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.542064] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.542506] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.542701] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.542811] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.543155] NET: Registered protocol family 1
[ 1.543675] RPC: Registered named UNIX socket transport module.
[ 1.543700] RPC: Registered udp transport module.
[ 1.543719] RPC: Registered tcp transport module.
[ 1.543738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.544283] PCI: CLS 0 bytes, default 128
[ 1.545301] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.545649] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.546253] kvm [1]: 8-bit VMID
[ 1.547421] kvm [1]: vgic-v2@fff20000
[ 1.547442] kvm [1]: GIC system register CPU interface enabled
[ 1.547621] kvm [1]: vgic interrupt IRQ10
[ 1.547811] kvm [1]: Hyp mode initialized successfully
[ 1.553031] Initialise system trusted keyrings
[ 1.553268] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 1.563952] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.564949] NFS: Registering the id_resolver key type
[ 1.564999] Key type id_resolver registered
[ 1.565019] Key type id_legacy registered
[ 1.565047] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.565280] fuse init (API version 7.26)
[ 1.565976] 9p: Installing v9fs 9p2000 file system support
[ 1.566139] pstore: using deflate compression
[ 1.570920] Key type asymmetric registered
[ 1.570951] Asymmetric key parser 'x509' registered
[ 1.571228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.571263] io scheduler noop registered
[ 1.571578] io scheduler cfq registered (default)
[ 1.571602] io scheduler mq-deadline registered
[ 1.571623] io scheduler kyber registered
[ 1.580899] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 1.580949] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 1.580984] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 1.581019] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 2.134648] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 2.134778] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 2.138798] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.138846] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 2.141051] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.141098] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 2.147012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.149122] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[ 3.529651] console [ttyS0] enabled
[ 3.534452] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[ 3.546875] [drm:drm_core_init] Initialized
[ 3.548862] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[ 3.557208] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[ 3.565886] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[ 3.577794] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 3.593704] loop: module loaded
[ 3.620048] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[ 3.627512] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[ 3.648992] m25p80 spi0.0: w25q32dw (4096 Kbytes)
[ 3.656033] rockchip-spi ff200000.spi: Failed to request TX DMA channel
[ 3.663483] rockchip-spi ff200000.spi: Failed to request RX DMA channel
[ 3.672663] libphy: Fixed MDIO Bus: probed
[ 3.678888] tun: Universal TUN/TAP device driver, 1.6
[ 3.684854] CAN device driver interface
[ 3.690937] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.697496] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.704219] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.712027] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.718357] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.727149] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.734103] sky2: driver version 1.30
[ 3.739698] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 3.746555] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 3.754487] rk_gmac-dwmac fe300000.ethernet: TX delay(0x10).
[ 3.760847] rk_gmac-dwmac fe300000.ethernet: RX delay(0x10).
[ 3.767213] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 3.774203] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 3.786066] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 3.792735] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 3.798416] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 3.804976] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 3.813417] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 3.820066] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 3.828467] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 3.834332] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 3.842241] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 3.849506] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.946451] libphy: stmmac: probed
[ 3.950280] Micrel KSZ9031 Gigabit PHY stmmac-0:06: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:06, irq=POLL)
[ 3.966627] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.975048] usbcore: registered new interface driver pegasus
[ 3.981465] usbcore: registered new interface driver rtl8150
[ 3.987888] usbcore: registered new interface driver r8152
[ 3.994107] usbcore: registered new interface driver asix
[ 4.000240] usbcore: registered new interface driver ax88179_178a
[ 4.007136] usbcore: registered new interface driver cdc_ether
[ 4.013745] usbcore: registered new interface driver dm9601
[ 4.020063] usbcore: registered new interface driver CoreChips
[ 4.026685] usbcore: registered new interface driver smsc75xx
[ 4.033210] usbcore: registered new interface driver smsc95xx
[ 4.039725] usbcore: registered new interface driver net1080
[ 4.046135] usbcore: registered new interface driver plusb
[ 4.052357] usbcore: registered new interface driver cdc_subset
[ 4.059064] usbcore: registered new interface driver zaurus
[ 4.065377] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 4.073750] usbcore: registered new interface driver cdc_ncm
[ 4.080361] VFIO - User Level meta-driver version: 0.3
[ 4.087884] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: Requested PHY is disabled
[ 4.102523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.109898] ehci-pci: EHCI PCI platform driver
[ 4.114978] ehci-platform: EHCI generic platform driver
[ 4.123135] ehci-platform fe380000.usb: EHCI Host Controller
[ 4.129519] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 4.138660] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[ 4.158629] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 4.166388] hub 1-0:1.0: USB hub found
[ 4.170647] hub 1-0:1.0: 1 port detected
[ 4.177712] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 4.184094] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 4.193202] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
[ 4.214630] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 4.222401] hub 2-0:1.0: USB hub found
[ 4.226658] hub 2-0:1.0: 1 port detected
[ 4.231861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.238826] ohci-pci: OHCI PCI platform driver
[ 4.243916] ohci-platform: OHCI generic platform driver
[ 4.250024] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 4.257584] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 4.266628] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[ 4.335788] hub 3-0:1.0: USB hub found
[ 4.340045] hub 3-0:1.0: 1 port detected
[ 4.345043] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 4.352591] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 4.361607] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
[ 4.431471] hub 4-0:1.0: USB hub found
[ 4.435727] hub 4-0:1.0: 1 port detected
[ 4.441721] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: Requested PHY is disabled
[ 4.450670] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.456855] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 4.466004] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02010010
[ 4.475797] xhci-hcd xhci-hcd.0.auto: irq 220, io mem 0xfe800000
[ 4.483519] hub 5-0:1.0: USB hub found
[ 4.487779] hub 5-0:1.0: 1 port detected
[ 4.492593] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.498778] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 4.507386] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.514886] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.524654] hub 6-0:1.0: USB hub found
[ 4.528905] hub 6-0:1.0: 1 port detected
[ 4.533849] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.540043] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 4.549305] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02010010
[ 4.559141] xhci-hcd xhci-hcd.1.auto: irq 221, io mem 0xfe900000
[ 4.566779] hub 7-0:1.0: USB hub found
[ 4.571032] hub 7-0:1.0: 1 port detected
[ 4.575832] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.582011] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 4.590619] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.598220] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.607977] hub 8-0:1.0: USB hub found
[ 4.612233] hub 8-0:1.0: 1 port detected
[ 4.617352] usbcore: registered new interface driver usb-storage
[ 4.628157] i2c /dev entries driver
[ 4.633008] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.642287] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.651423] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.660484] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.671162] rtc-isl1208 7-006f: rtc power failure detected, please set clock.
[ 4.680922] rtc-isl1208 7-006f: registered as rtc0
[ 4.686379] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.696290] rk808 0-001b: chip id: 0x0
[ 4.704631] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 4.711618] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 4.718799] DCDC_REG1: supplied by vcc5v0_sys
[ 4.724665] DCDC_REG2: supplied by vcc5v0_sys
[ 4.730176] DCDC_REG3: supplied by vcc5v0_sys
[ 4.735354] DCDC_REG4: supplied by vcc5v0_sys
[ 4.740782] LDO_REG1: supplied by vcc5v0_sys
[ 4.746880] LDO_REG2: supplied by vcc5v0_sys
[ 4.752743] LDO_REG3: supplied by vcc5v0_sys
[ 4.758742] LDO_REG4: supplied by vcc5v0_sys
[ 4.764724] LDO_REG5: supplied by vcc5v0_sys
[ 4.770581] LDO_REG6: supplied by vcc5v0_sys
[ 4.776437] LDO_REG7: supplied by vcc5v0_sys
[ 4.782283] LDO_REG8: supplied by vcc5v0_sys
[ 4.788146] SWITCH_REG1: supplied by vcc3v3_sys
[ 4.793612] SWITCH_REG2: supplied by vcc3v3_sys
[ 4.802274] rk808-rtc rk808-rtc: registered as rtc1
[ 4.808494] fan53555-regulator 0-0060: FAN53555 Option[5] Rev[3] Detected!
[ 4.816242] fan53555-reg: supplied by vcc5v0_sys
[ 4.822695] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.832007] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.841728] fan53555-regulator 8-0060: FAN53555 Option[5] Rev[3] Detected!
[ 4.849484] fan53555-reg: supplied by vcc5v0_sys
[ 4.854740] random: fast init done
[ 4.859682] rk3x-i2c ff3e0000.i2c: Initialized RK3xxx I2C bus at (ptrval)
[ 4.872350] amc6821 7-0018: Revision 2
[ 4.880975] Bluetooth: HCI UART driver ver 2.3
[ 4.890378] sdhci: Secure Digital Host Controller Interface driver
[ 4.897316] sdhci: Copyright(c) Pierre Ossman
[ 4.902267] Synopsys Designware Multimedia Card Interface Driver
[ 4.909996] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 4.918178] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 4.925784] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 4.932253] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.943272] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[ 4.961866] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 4.985173] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.992412] mmc1: CQHCI version 5.10
[ 5.018629] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 5.028238] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.035710] usbcore: registered new interface driver usbhid
[ 5.042002] usbhid: USB HID core driver
[ 5.048581] NET: Registered protocol family 10
[ 5.054295] Segment Routing with IPv6
[ 5.058637] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.065336] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 5.065704] NET: Registered protocol family 17
[ 5.081271] mmc0: new high speed SDHC card at address aaaa
[ 5.081285] Bridge firewalling registered
[ 5.088068] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 5.091928] can: controller area network core (rev 20170425 abi 9)
[ 5.103879] NET: Registered protocol family 29
[ 5.103998] mmcblk0: p1
[ 5.108858] can: raw protocol (rev 20170425)
[ 5.116465] can: broadcast manager protocol (rev 20170425 t)
[ 5.122795] can: netlink gateway (rev 20170425) max_hops=1
[ 5.125341] mmc1: Command Queue Engine enabled
[ 5.129000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.133924] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 5.140531] Bluetooth: HIDP socket layer initialized
[ 5.140551] 8021q: 802.1Q VLAN Support v1.8
[ 5.148077] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[ 5.153227] 9pnet: Installing 9P2000 support
[ 5.158100] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[ 5.162982] Key type dns_resolver registered
[ 5.167944] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[ 5.174690] registered taskstats version 1
[ 5.179236] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (241:0)
[ 5.185753] Loading compiled-in X.509 certificates
[ 5.186161] Btrfs loaded, crc32c=crc32c-generic
[ 5.191939] mmcblk1: p1
[ 5.210064] rtc-isl1208 7-006f: hctosys: unable to read the hardware clock
[ 5.219566] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.228850] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.236181] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.238980] vdda_codec: disabling
[ 5.245815] cfg80211: failed to load regulatory.db
[ 5.249521] vddd_codec: disabling
[ 5.258566] vcc_ldo1: disabling
[ 5.262180] vcc_ldo5: disabling
[ 5.265785] vcc_ldo6: disabling
[ 5.269392] ALSA device list:
[ 5.272707] No soundcards found.
[ 5.276670] ttyS0 - failed to request DMA
[ 5.314317] EXT4-fs (mmcblk1p1): recovery complete
[ 5.320171] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.329237] VFS: Mounted root (ext4 filesystem) on device 179:33.
[ 5.341577] devtmpfs: mounted
[ 5.345243] Freeing unused kernel memory: 896K
[ 5.403954] systemd[1]: System time before build time, advancing clock.
[ 5.415093] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.424137] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.432364] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.452775] systemd[1]: Detected architecture arm64.
[ 5.474849] systemd[1]: Set hostname to <rk3399-q7>.
[ 5.489398] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.494066] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 5.494323] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[ 5.514839] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 5.517539] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 5.531282] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 5.539481] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 5.547927] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 5.617964] systemd[1]: Listening on Network Service Netlink Socket.
[ 5.638703] systemd[1]: Reached target Remote File Systems.
[ 5.658701] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.678875] systemd[1]: Created slice System Slice.
[ 5.694836] systemd[1]: Created slice system-getty.slice.
[ 5.714693] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.734721] systemd[1]: Listening on Journal Socket.
[ 6.282865] systemd-journald[1694]: Received request to flush runtime journal from PID 1
[ 6.501199] Micrel KSZ9031 Gigabit PHY stmmac-0:06: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:06, irq=POLL)
[ 6.516757] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 6.525304] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.974636] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 7.142712] alloc_contig_range: [7f061, 7f062) PFNs busy
[ 7.148862] alloc_contig_range: [7f066, 7f067) PFNs busy
[ 7.155041] alloc_contig_range: [7f067, 7f068) PFNs busy
[ 7.161139] alloc_contig_range: [7f070, 7f071) PFNs busy
[ 7.167295] alloc_contig_range: [7f071, 7f072) PFNs busy
[ 7.173413] alloc_contig_range: [7f072, 7f073) PFNs busy
[ 7.181387] alloc_contig_range: [7f073, 7f074) PFNs busy
[ 7.190623] alloc_contig_range: [7f074, 7f075) PFNs busy
[ 7.196668] alloc_contig_range: [7f075, 7f076) PFNs busy
[ 7.202793] alloc_contig_range: [7f076, 7f077) PFNs busy
[ 7.254911] hub 7-1:1.0: USB hub found
[ 7.259878] hub 7-1:1.0: 4 ports detected
[ 7.322543] rockchip-drm display-subsystem: master bind failed: -12
[ 7.329619] rockchip-vop: probe of ff900000.vop failed with error -12
[ 7.610611] usb 7-1.4: new full-speed USB device number 3 using xhci-hcd
[ 8.094642] usb 7-1.2: new low-speed USB device number 4 using xhci-hcd
[ 8.281604] input: PixArt USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.2/7-1.2:1.0/0003:093A:2510.0001/input/input0
[ 8.298383] hid-generic 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-xhci-hcd.1.auto-1.2/input0
[ 14.723490] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 14.733177] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@rk3399-q7:~#
@linshenghuan123
Copy link

你能给我 你的 dts吗

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment