Created
June 9, 2023 19:06
-
-
Save jalexandre0/1940c1bff37d0eff7df20291aa8197a9 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by SuperSlicer 2.4 on 2023-06-09 at 19:05:38 UTC | |
| [print:First Layer Test] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonicgapfill | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 95% | |
| bridge_internal_acceleration = 0 | |
| bridge_overlap = 90% | |
| bridge_overlap_min = 80% | |
| bridge_speed = 25 | |
| bridge_speed_internal = 150% | |
| bridge_type = nozzle | |
| bridged_infill_margin = 200% | |
| brim_acceleration = 0 | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_separation = 0 | |
| brim_speed = 50% | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ | |
| complete_objects = 0 | |
| complete_objects_one_brim = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 500 | |
| default_speed = 100 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| enforce_retract_first_layer = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_acceleration = 0 | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = | |
| external_perimeter_extrusion_width = 120% | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 25 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 0 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extrusion_spacing = 100% | |
| extrusion_width = | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 15% | |
| fill_pattern = gyroid | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 100% | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_spacing = | |
| first_layer_extrusion_width = 120% | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.25 | |
| first_layer_infill_speed = 20 | |
| first_layer_min_speed = 20 | |
| first_layer_size_compensation = -0.1 | |
| first_layer_size_compensation_layers = 1 | |
| first_layer_speed = 20 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 200% | |
| fuzzy_skin_thickness = 150% | |
| gap_fill_acceleration = 0 | |
| gap_fill_enabled = 1 | |
| gap_fill_flow_match_perimeter = 0% | |
| gap_fill_last = 0 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 30 | |
| gcode_comments = 0 | |
| gcode_label_objects = 1 | |
| gcode_resolution = 0 | |
| gcode_substitutions = | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| hole_to_polyhole_twisted = 1 | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = | |
| infill_extrusion_width = 120% | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 50 | |
| inherits = 0.28mm SUPERDRAFT @CREALITY | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_acceleration = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 50% | |
| ironing_type = top | |
| layer_height = 0.25 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 0 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 4 | |
| min_width_top_surface = 100% | |
| mmu_segmented_region_max_width = 0 | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_first_layer = 0 | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| over_bridge_flow_ratio = 120% | |
| overhangs_acceleration = 0 | |
| overhangs_reverse = 0 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 100% | |
| overhangs_width = 80% | |
| overhangs_width_speed = 40% | |
| perimeter_acceleration = 0 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = | |
| perimeter_extrusion_width = 120% | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_custom_variables = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = | |
| print_temperature = 0 | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0.0125 | |
| resolution_internal = 0.1 | |
| seam_angle_cost = 80% | |
| seam_position = cost | |
| seam_travel_cost = 20% | |
| single_extruder_multi_material_priming = 0 | |
| skirt_brim = 0 | |
| skirt_distance = 3 | |
| skirt_distance_from_brim = 1 | |
| skirt_extrusion_width = 120% | |
| skirt_height = 2 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 25 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_acceleration = 0 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = | |
| solid_infill_extrusion_width = 120% | |
| solid_infill_overlap = 100% | |
| solid_infill_speed = 40 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_acceleration = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 1 | |
| support_material_bottom_contact_distance = 0.15 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.15 | |
| support_material_contact_distance_type = filament | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_acceleration = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 40 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_perimeters = 100% | |
| thin_perimeters_all = 20% | |
| thin_walls = 1 | |
| thin_walls_acceleration = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 50% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 100% | |
| threads = 8 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_spacing = | |
| top_infill_extrusion_width = 120% | |
| top_solid_infill_acceleration = 0 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 4 | |
| top_solid_min_thickness = 0 | |
| travel_acceleration = 1500 | |
| travel_deceleration_use_target = 1 | |
| travel_speed = 150 | |
| travel_speed_z = 0 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [print:Gina - 100mms] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonicgapfill | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 95% | |
| bridge_internal_acceleration = 0 | |
| bridge_overlap = 90% | |
| bridge_overlap_min = 80% | |
| bridge_speed = 150 | |
| bridge_speed_internal = 150 | |
| bridge_type = nozzle | |
| bridged_infill_margin = 200% | |
| brim_acceleration = 0 | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_separation = 0 | |
| brim_speed = 100 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ | |
| complete_objects = 0 | |
| complete_objects_one_brim = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 0 | |
| default_speed = 100 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| enforce_retract_first_layer = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_acceleration = 0 | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = 100% | |
| external_perimeter_extrusion_width = | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 150 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 0 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extrusion_spacing = 100% | |
| extrusion_width = | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 15% | |
| fill_pattern = grid | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 100% | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_spacing = 130% | |
| first_layer_extrusion_width = | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.2 | |
| first_layer_infill_speed = 20 | |
| first_layer_min_speed = 20 | |
| first_layer_size_compensation = -0.1 | |
| first_layer_size_compensation_layers = 1 | |
| first_layer_speed = 20 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 200% | |
| fuzzy_skin_thickness = 150% | |
| gap_fill_acceleration = 0 | |
| gap_fill_enabled = 1 | |
| gap_fill_flow_match_perimeter = 0% | |
| gap_fill_last = 0 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 150 | |
| gcode_comments = 0 | |
| gcode_label_objects = 1 | |
| gcode_resolution = 0 | |
| gcode_substitutions = | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| hole_to_polyhole_twisted = 1 | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = 100% | |
| infill_extrusion_width = | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 150 | |
| inherits = 0.20mm NORMAL @CREALITY | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_acceleration = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 50% | |
| ironing_type = top | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 0 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 4 | |
| min_width_top_surface = 100% | |
| mmu_segmented_region_max_width = 0 | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_first_layer = 0 | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| over_bridge_flow_ratio = 120% | |
| overhangs_acceleration = 0 | |
| overhangs_reverse = 0 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 100 | |
| overhangs_width = 80% | |
| overhangs_width_speed = 40% | |
| perimeter_acceleration = 0 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = 105% | |
| perimeter_extrusion_width = | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 150 | |
| perimeters = 3 | |
| post_process = | |
| print_custom_variables = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = | |
| print_temperature = 0 | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0.0125 | |
| resolution_internal = 0.1 | |
| seam_angle_cost = 80% | |
| seam_position = cost | |
| seam_travel_cost = 20% | |
| single_extruder_multi_material_priming = 0 | |
| skirt_brim = 0 | |
| skirt_distance = 3 | |
| skirt_distance_from_brim = 1 | |
| skirt_extrusion_width = 120% | |
| skirt_height = 2 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 25 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_acceleration = 0 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = 105% | |
| solid_infill_extrusion_width = | |
| solid_infill_overlap = 100% | |
| solid_infill_speed = 150 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_acceleration = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_bottom_contact_distance = 0.15 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.15 | |
| support_material_contact_distance_type = filament | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_acceleration = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 150 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_perimeters = 100% | |
| thin_perimeters_all = 20% | |
| thin_walls = 1 | |
| thin_walls_acceleration = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 50% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 150 | |
| threads = 8 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_spacing = 100% | |
| top_infill_extrusion_width = | |
| top_solid_infill_acceleration = 0 | |
| top_solid_infill_speed = 100 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_acceleration = 1500 | |
| travel_deceleration_use_target = 0 | |
| travel_speed = 150 | |
| travel_speed_z = 0 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [print:Gina - 100mms - 0.28 Layer Height] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonicgapfill | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 95% | |
| bridge_internal_acceleration = 0 | |
| bridge_overlap = 90% | |
| bridge_overlap_min = 80% | |
| bridge_speed = 100 | |
| bridge_speed_internal = 100 | |
| bridge_type = nozzle | |
| bridged_infill_margin = 200% | |
| brim_acceleration = 0 | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_separation = 0 | |
| brim_speed = 100 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 0 | |
| compatible_printers = | |
| compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ | |
| complete_objects = 0 | |
| complete_objects_one_brim = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 0 | |
| default_speed = 100 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| duplicate_distance = 3 | |
| enforce_full_fill_volume = 1 | |
| enforce_retract_first_layer = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_acceleration = 0 | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = 100% | |
| external_perimeter_extrusion_width = | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 100 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 0 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extrusion_spacing = 100% | |
| extrusion_width = | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 15% | |
| fill_pattern = grid | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 100% | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_spacing = 130% | |
| first_layer_extrusion_width = | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.28 | |
| first_layer_infill_speed = 75 | |
| first_layer_min_speed = 75 | |
| first_layer_size_compensation = -0.1 | |
| first_layer_size_compensation_layers = 1 | |
| first_layer_speed = 75 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 200% | |
| fuzzy_skin_thickness = 150% | |
| gap_fill_acceleration = 0 | |
| gap_fill_enabled = 1 | |
| gap_fill_flow_match_perimeter = 0% | |
| gap_fill_last = 0 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 100 | |
| gcode_comments = 0 | |
| gcode_label_objects = 1 | |
| gcode_resolution = 0 | |
| gcode_substitutions = | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| hole_to_polyhole_twisted = 1 | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = 100% | |
| infill_extrusion_width = | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 100 | |
| inherits = 0.20mm NORMAL @CREALITY | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_acceleration = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 50% | |
| ironing_type = top | |
| layer_height = 0.28 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 12 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 4 | |
| min_width_top_surface = 100% | |
| mmu_segmented_region_max_width = 0 | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_first_layer = 0 | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| over_bridge_flow_ratio = 120% | |
| overhangs_acceleration = 0 | |
| overhangs_reverse = 0 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 100 | |
| overhangs_width = 80% | |
| overhangs_width_speed = 75% | |
| perimeter_acceleration = 0 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = 105% | |
| perimeter_extrusion_width = | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 100 | |
| perimeters = 1 | |
| post_process = | |
| print_custom_variables = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = | |
| print_temperature = 0 | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0.0125 | |
| resolution_internal = 0.1 | |
| seam_angle_cost = 80% | |
| seam_position = rear | |
| seam_travel_cost = 20% | |
| single_extruder_multi_material_priming = 0 | |
| skirt_brim = 0 | |
| skirt_distance = 3 | |
| skirt_distance_from_brim = 1 | |
| skirt_extrusion_width = 120% | |
| skirt_height = 2 | |
| skirts = 0 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 75 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_acceleration = 0 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = 105% | |
| solid_infill_extrusion_width = | |
| solid_infill_overlap = 100% | |
| solid_infill_speed = 100 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_acceleration = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_bottom_contact_distance = 0.15 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.15 | |
| support_material_contact_distance_type = filament | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_acceleration = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 100 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_perimeters = 100% | |
| thin_perimeters_all = 20% | |
| thin_walls = 1 | |
| thin_walls_acceleration = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 50% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 100 | |
| threads = 8 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_spacing = 100% | |
| top_infill_extrusion_width = | |
| top_solid_infill_acceleration = 0 | |
| top_solid_infill_speed = 100 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_acceleration = 1500 | |
| travel_deceleration_use_target = 0 | |
| travel_speed = 300 | |
| travel_speed_z = 100 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [print:Gina - 150mms] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonicgapfill | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 95% | |
| bridge_internal_acceleration = 0 | |
| bridge_overlap = 90% | |
| bridge_overlap_min = 80% | |
| bridge_speed = 150 | |
| bridge_speed_internal = 150 | |
| bridge_type = nozzle | |
| bridged_infill_margin = 200% | |
| brim_acceleration = 0 | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_separation = 0 | |
| brim_speed = 100 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ | |
| complete_objects = 0 | |
| complete_objects_one_brim = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 0 | |
| default_speed = 100 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| enforce_retract_first_layer = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_acceleration = 0 | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = 100% | |
| external_perimeter_extrusion_width = | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 150 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 0 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extrusion_spacing = 100% | |
| extrusion_width = | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 15% | |
| fill_pattern = grid | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 100% | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_spacing = 130% | |
| first_layer_extrusion_width = | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.2 | |
| first_layer_infill_speed = 20 | |
| first_layer_min_speed = 20 | |
| first_layer_size_compensation = -0.1 | |
| first_layer_size_compensation_layers = 1 | |
| first_layer_speed = 20 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 200% | |
| fuzzy_skin_thickness = 150% | |
| gap_fill_acceleration = 0 | |
| gap_fill_enabled = 1 | |
| gap_fill_flow_match_perimeter = 0% | |
| gap_fill_last = 0 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 150 | |
| gcode_comments = 0 | |
| gcode_label_objects = 1 | |
| gcode_resolution = 0 | |
| gcode_substitutions = | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| hole_to_polyhole_twisted = 1 | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = 100% | |
| infill_extrusion_width = | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 150 | |
| inherits = 0.20mm NORMAL @CREALITY | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_acceleration = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 50% | |
| ironing_type = top | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 0 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 4 | |
| min_width_top_surface = 100% | |
| mmu_segmented_region_max_width = 0 | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_first_layer = 0 | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| over_bridge_flow_ratio = 120% | |
| overhangs_acceleration = 0 | |
| overhangs_reverse = 0 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 100 | |
| overhangs_width = 80% | |
| overhangs_width_speed = 40% | |
| perimeter_acceleration = 0 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = 105% | |
| perimeter_extrusion_width = | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 150 | |
| perimeters = 3 | |
| post_process = | |
| print_custom_variables = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = | |
| print_temperature = 0 | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0.0125 | |
| resolution_internal = 0.1 | |
| seam_angle_cost = 80% | |
| seam_position = cost | |
| seam_travel_cost = 20% | |
| single_extruder_multi_material_priming = 0 | |
| skirt_brim = 0 | |
| skirt_distance = 3 | |
| skirt_distance_from_brim = 1 | |
| skirt_extrusion_width = 120% | |
| skirt_height = 2 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 25 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_acceleration = 0 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = 105% | |
| solid_infill_extrusion_width = | |
| solid_infill_overlap = 100% | |
| solid_infill_speed = 150 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_acceleration = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_bottom_contact_distance = 0.15 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.15 | |
| support_material_contact_distance_type = filament | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_acceleration = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 150 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_perimeters = 100% | |
| thin_perimeters_all = 20% | |
| thin_walls = 1 | |
| thin_walls_acceleration = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 50% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 150 | |
| threads = 8 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_spacing = 100% | |
| top_infill_extrusion_width = | |
| top_solid_infill_acceleration = 0 | |
| top_solid_infill_speed = 100 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_acceleration = 1500 | |
| travel_deceleration_use_target = 0 | |
| travel_speed = 150 | |
| travel_speed_z = 0 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [print:Gina - 150mms - 0.28 Layer Height] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonicgapfill | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 95% | |
| bridge_internal_acceleration = 0 | |
| bridge_overlap = 90% | |
| bridge_overlap_min = 80% | |
| bridge_speed = 50 | |
| bridge_speed_internal = 75 | |
| bridge_type = nozzle | |
| bridged_infill_margin = 200% | |
| brim_acceleration = 0 | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_separation = 0 | |
| brim_speed = 100 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ | |
| complete_objects = 0 | |
| complete_objects_one_brim = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 0 | |
| default_speed = 100 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| enforce_retract_first_layer = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_acceleration = 0 | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = 100% | |
| external_perimeter_extrusion_width = | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 100 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 0 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extrusion_spacing = 100% | |
| extrusion_width = | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 15% | |
| fill_pattern = grid | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 100% | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_spacing = 130% | |
| first_layer_extrusion_width = | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.28 | |
| first_layer_infill_speed = 100 | |
| first_layer_min_speed = 100 | |
| first_layer_size_compensation = -0.1 | |
| first_layer_size_compensation_layers = 1 | |
| first_layer_speed = 100 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 200% | |
| fuzzy_skin_thickness = 150% | |
| gap_fill_acceleration = 0 | |
| gap_fill_enabled = 1 | |
| gap_fill_flow_match_perimeter = 0% | |
| gap_fill_last = 0 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 100 | |
| gcode_comments = 0 | |
| gcode_label_objects = 1 | |
| gcode_resolution = 0 | |
| gcode_substitutions = | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| hole_to_polyhole_twisted = 1 | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = 100% | |
| infill_extrusion_width = | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 100 | |
| inherits = 0.20mm NORMAL @CREALITY | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_acceleration = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 50% | |
| ironing_type = top | |
| layer_height = 0.28 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 0 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 4 | |
| min_width_top_surface = 100% | |
| mmu_segmented_region_max_width = 0 | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_first_layer = 0 | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| over_bridge_flow_ratio = 120% | |
| overhangs_acceleration = 0 | |
| overhangs_reverse = 0 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 50 | |
| overhangs_width = 80% | |
| overhangs_width_speed = 40% | |
| perimeter_acceleration = 0 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = 105% | |
| perimeter_extrusion_width = | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 100 | |
| perimeters = 3 | |
| post_process = | |
| print_custom_variables = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = | |
| print_temperature = 0 | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0.0125 | |
| resolution_internal = 0.1 | |
| seam_angle_cost = 80% | |
| seam_position = allrandom | |
| seam_travel_cost = 20% | |
| single_extruder_multi_material_priming = 0 | |
| skirt_brim = 0 | |
| skirt_distance = 3 | |
| skirt_distance_from_brim = 1 | |
| skirt_extrusion_width = 120% | |
| skirt_height = 2 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 100 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_acceleration = 0 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = 105% | |
| solid_infill_extrusion_width = | |
| solid_infill_overlap = 100% | |
| solid_infill_speed = 100 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_acceleration = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_bottom_contact_distance = 0.15 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.15 | |
| support_material_contact_distance_type = filament | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_acceleration = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 100 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_perimeters = 100% | |
| thin_perimeters_all = 20% | |
| thin_walls = 1 | |
| thin_walls_acceleration = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 50% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 100 | |
| threads = 8 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_spacing = 100% | |
| top_infill_extrusion_width = | |
| top_solid_infill_acceleration = 0 | |
| top_solid_infill_speed = 100 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_acceleration = 1500 | |
| travel_deceleration_use_target = 0 | |
| travel_speed = 250 | |
| travel_speed_z = 100 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [filament:PETG Volt3d] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| bridge_internal_fan_speed = 100 | |
| chamber_temperature = 0 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ | |
| compatible_prints = | |
| compatible_prints_condition = | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | |
| external_perimeter_fan_speed = -1 | |
| extrusion_multiplier = 0.91 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 0 | |
| filament_colour = #C1C1C1 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cooling_zone_pause = 0 | |
| filament_cost = 106 | |
| filament_custom_variables = "" | |
| filament_density = 1.27 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_dip_extraction_speed = 70 | |
| filament_dip_insertion_speed = 33 | |
| filament_enable_toolchange_part_fan = 0 | |
| filament_enable_toolchange_temp = 0 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_overlap = 100% | |
| filament_max_speed = 100 | |
| filament_max_volumetric_speed = 12 | |
| filament_max_wipe_tower_speed = 0 | |
| filament_melt_zone_pause = 0 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = nil | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_seam_gap = nil | |
| filament_settings_id = "" | |
| filament_shrink = 100% | |
| filament_skinnydip_distance = 31 | |
| filament_soluble = 0 | |
| filament_spool_weight = 1000 | |
| filament_toolchange_delay = 0 | |
| filament_toolchange_part_fan_speed = 50 | |
| filament_toolchange_temp = 200 | |
| filament_type = PETG | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_use_fast_skinnydip = 0 | |
| filament_use_skinnydip = 0 | |
| filament_vendor = Generic | |
| filament_wipe = nil | |
| filament_wipe_advanced_pigment = 0.5 | |
| filament_wipe_extra_perimeter = nil | |
| filament_wipe_inside_depth = nil | |
| filament_wipe_inside_end = nil | |
| filament_wipe_inside_start = nil | |
| filament_wipe_only_crossing = nil | |
| filament_wipe_speed = nil | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 230 | |
| full_fan_speed_layer = 2 | |
| inherits = Generic PETG @CREALITY | |
| max_fan_speed = 100 | |
| max_speed_reduction = 0% | |
| min_fan_speed = 50 | |
| min_print_speed = 100 | |
| slowdown_below_layer_time = 0 | |
| start_filament_gcode = "; Filament gcode\n" | |
| support_material_interface_fan_speed = -1 | |
| temperature = 225 | |
| top_fan_speed = -1 | |
| [filament:PLA Volt#d] | |
| bed_temperature = 55 | |
| bridge_fan_speed = 100 | |
| bridge_internal_fan_speed = -1 | |
| chamber_temperature = 0 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ | |
| compatible_prints = | |
| compatible_prints_condition = | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | |
| external_perimeter_fan_speed = -1 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #DCC260 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cooling_zone_pause = 0 | |
| filament_cost = 20 | |
| filament_custom_variables = "" | |
| filament_density = 1.24 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_dip_extraction_speed = 70 | |
| filament_dip_insertion_speed = 33 | |
| filament_enable_toolchange_part_fan = 0 | |
| filament_enable_toolchange_temp = 0 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_overlap = 100% | |
| filament_max_speed = 0 | |
| filament_max_volumetric_speed = 15 | |
| filament_max_wipe_tower_speed = 0 | |
| filament_melt_zone_pause = 0 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = nil | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_seam_gap = nil | |
| filament_settings_id = "" | |
| filament_shrink = 100% | |
| filament_skinnydip_distance = 31 | |
| filament_soluble = 0 | |
| filament_spool_weight = 0 | |
| filament_toolchange_delay = 0 | |
| filament_toolchange_part_fan_speed = 50 | |
| filament_toolchange_temp = 200 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_use_fast_skinnydip = 0 | |
| filament_use_skinnydip = 0 | |
| filament_vendor = Generic | |
| filament_wipe = nil | |
| filament_wipe_advanced_pigment = 0.5 | |
| filament_wipe_extra_perimeter = nil | |
| filament_wipe_inside_depth = nil | |
| filament_wipe_inside_end = nil | |
| filament_wipe_inside_start = nil | |
| filament_wipe_only_crossing = nil | |
| filament_wipe_speed = nil | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 210 | |
| full_fan_speed_layer = 4 | |
| inherits = Generic PLA @CREALITY | |
| max_fan_speed = 100 | |
| max_speed_reduction = 90% | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 0 | |
| start_filament_gcode = "; Filament gcode\n" | |
| support_material_interface_fan_speed = -1 | |
| temperature = 205 | |
| top_fan_speed = -1 | |
| [filament:PLA Volt3D] | |
| bed_temperature = 55 | |
| bridge_fan_speed = 100 | |
| bridge_internal_fan_speed = 100 | |
| chamber_temperature = 0 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ | |
| compatible_prints = | |
| compatible_prints_condition = | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | |
| external_perimeter_fan_speed = -1 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 0 | |
| filament_colour = #DCC260 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cooling_zone_pause = 0 | |
| filament_cost = 20 | |
| filament_custom_variables = "" | |
| filament_density = 1.24 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_dip_extraction_speed = 70 | |
| filament_dip_insertion_speed = 33 | |
| filament_enable_toolchange_part_fan = 0 | |
| filament_enable_toolchange_temp = 0 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_overlap = 100% | |
| filament_max_speed = 0 | |
| filament_max_volumetric_speed = 15 | |
| filament_max_wipe_tower_speed = 0 | |
| filament_melt_zone_pause = 0 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = nil | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_seam_gap = nil | |
| filament_settings_id = "" | |
| filament_shrink = 100% | |
| filament_skinnydip_distance = 31 | |
| filament_soluble = 0 | |
| filament_spool_weight = 0 | |
| filament_toolchange_delay = 0 | |
| filament_toolchange_part_fan_speed = 50 | |
| filament_toolchange_temp = 200 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_use_fast_skinnydip = 0 | |
| filament_use_skinnydip = 0 | |
| filament_vendor = Generic | |
| filament_wipe = nil | |
| filament_wipe_advanced_pigment = 0.5 | |
| filament_wipe_extra_perimeter = nil | |
| filament_wipe_inside_depth = nil | |
| filament_wipe_inside_end = nil | |
| filament_wipe_inside_start = nil | |
| filament_wipe_only_crossing = nil | |
| filament_wipe_speed = nil | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 210 | |
| full_fan_speed_layer = 5 | |
| inherits = Generic PLA @CREALITY | |
| max_fan_speed = 100 | |
| max_speed_reduction = 0% | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 0 | |
| start_filament_gcode = "; Filament gcode\n" | |
| support_material_interface_fan_speed = -1 | |
| temperature = 205 | |
| top_fan_speed = -1 | |
| [printer:Creality Ender-3 S1 - Copy] | |
| bed_custom_model = | |
| bed_custom_texture = | |
| bed_shape = 5x0,215x0,215x220,5x220 | |
| before_layer_gcode = | |
| between_objects_gcode = | |
| color_change_gcode = M600 | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Generic PLA @CREALITY" | |
| default_print_profile = 0.20mm NORMAL @CREALITY | |
| deretract_speed = 30 | |
| end_gcode = PRINT_DONE | |
| extra_loading_move = -2 | |
| extruder_colour = #FCE94F | |
| extruder_fan_offset = 0% | |
| extruder_offset = 0x0 | |
| extruder_temperature_offset = 0 | |
| fan_kickstart = 0 | |
| fan_percentage = 0 | |
| fan_speedup_overhangs = 1 | |
| fan_speedup_time = 0 | |
| feature_gcode = | |
| gcode_filename_illegal_char = [<>:"/\\\\|?*] | |
| gcode_flavor = marlin | |
| gcode_precision_e = 5 | |
| gcode_precision_xyz = 3 | |
| high_current_on_filament_swap = 0 | |
| host_type = octoprint | |
| inherits = Creality Ender-3 S1 | |
| init_z_rotate = 0 | |
| layer_gcode = | |
| lift_min = 0 | |
| machine_limits_usage = ignore | |
| machine_max_acceleration_e = 5000 | |
| machine_max_acceleration_extruding = 500 | |
| machine_max_acceleration_retracting = 1000 | |
| machine_max_acceleration_travel = 1500,1250 | |
| machine_max_acceleration_x = 500 | |
| machine_max_acceleration_y = 500 | |
| machine_max_acceleration_z = 100 | |
| machine_max_feedrate_e = 60 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 10 | |
| machine_max_jerk_e = 5 | |
| machine_max_jerk_x = 8 | |
| machine_max_jerk_y = 8 | |
| machine_max_jerk_z = 0.4 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_gcode_per_second = 1500 | |
| max_layer_height = 0.32 | |
| max_print_height = 270 | |
| milling_diameter = | |
| milling_toolchange_end_gcode = | |
| milling_toolchange_start_gcode = | |
| milling_z_lift = | |
| min_layer_height = 0.04 | |
| min_length = 0.035 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| pause_print_gcode = | |
| print_host = | |
| printer_custom_variables = | |
| printer_model = ENDER3S1 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1 | |
| printer_settings_id = | |
| printer_technology = FFF | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| printhost_port = | |
| remaining_times = 0 | |
| remaining_times_type = m73 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 1 | |
| retract_lift = 0 | |
| retract_lift_above = 0 | |
| retract_lift_below = 0 | |
| retract_lift_first_layer = 0 | |
| retract_lift_top = "All surfaces" | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 30 | |
| seam_gap = 15% | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = PRINT_START | |
| start_gcode_manual = 0 | |
| template_custom_gcode = | |
| thumbnails = 0x0,0x0 | |
| thumbnails_color = #018aff | |
| thumbnails_custom_color = 0 | |
| thumbnails_end_file = 0 | |
| thumbnails_format = PNG | |
| thumbnails_with_bed = 1 | |
| time_cost = 0 | |
| time_estimation_compensation = 100% | |
| time_start_gcode = 20 | |
| time_toolchange = 30 | |
| tool_name = "" | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| wipe_advanced = 0 | |
| wipe_advanced_algo = linear | |
| wipe_advanced_multiplier = 60 | |
| wipe_advanced_nozzle_melted_volume = 120 | |
| wipe_extra_perimeter = 0 | |
| wipe_inside_depth = 50% | |
| wipe_inside_end = 1 | |
| wipe_inside_start = 0 | |
| wipe_only_crossing = 1 | |
| wipe_speed = 0 | |
| z_offset = 0 | |
| z_step = 0.04 | |
| [printer:Gina] | |
| bed_custom_model = | |
| bed_custom_texture = | |
| bed_shape = 0x0,230x0,230x220,0x220 | |
| before_layer_gcode = | |
| between_objects_gcode = | |
| color_change_gcode = M600 | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Generic PLA @CREALITY" | |
| default_print_profile = 0.20mm NORMAL @CREALITY | |
| deretract_speed = 30 | |
| end_gcode = PRINT_DONE | |
| extra_loading_move = -2 | |
| extruder_colour = #FCE94F | |
| extruder_fan_offset = 0% | |
| extruder_offset = 0x0 | |
| extruder_temperature_offset = 0 | |
| fan_kickstart = 0 | |
| fan_percentage = 1 | |
| fan_speedup_overhangs = 0 | |
| fan_speedup_time = 0 | |
| feature_gcode = | |
| gcode_filename_illegal_char = [<>:"/\\\\|?*] | |
| gcode_flavor = klipper | |
| gcode_precision_e = 5 | |
| gcode_precision_xyz = 3 | |
| high_current_on_filament_swap = 0 | |
| host_type = octoprint | |
| inherits = Creality Ender-3 S1 | |
| init_z_rotate = 0 | |
| layer_gcode = | |
| lift_min = 0 | |
| machine_limits_usage = ignore | |
| machine_max_acceleration_e = 5000 | |
| machine_max_acceleration_extruding = 500 | |
| machine_max_acceleration_retracting = 1000 | |
| machine_max_acceleration_travel = 1500,1250 | |
| machine_max_acceleration_x = 500 | |
| machine_max_acceleration_y = 500 | |
| machine_max_acceleration_z = 100 | |
| machine_max_feedrate_e = 60 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 10 | |
| machine_max_jerk_e = 5 | |
| machine_max_jerk_x = 8 | |
| machine_max_jerk_y = 8 | |
| machine_max_jerk_z = 0.4 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_gcode_per_second = 1500 | |
| max_layer_height = 0.32 | |
| max_print_height = 250 | |
| milling_diameter = | |
| milling_toolchange_end_gcode = | |
| milling_toolchange_start_gcode = | |
| milling_z_lift = | |
| min_layer_height = 0.04 | |
| min_length = 0.035 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| pause_print_gcode = | |
| print_host = | |
| printer_custom_variables = | |
| printer_model = ENDER3S1 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1 | |
| printer_settings_id = | |
| printer_technology = FFF | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| printhost_port = | |
| remaining_times = 0 | |
| remaining_times_type = m73 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 1 | |
| retract_lift = 0 | |
| retract_lift_above = 0 | |
| retract_lift_below = 0 | |
| retract_lift_first_layer = 0 | |
| retract_lift_top = "All surfaces" | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 30 | |
| seam_gap = 15% | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = PRINT_START EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature] FILAMENT=[filament_type] | |
| start_gcode_manual = 1 | |
| template_custom_gcode = | |
| thumbnails = 32x32,300x300 | |
| thumbnails_color = #FB001B | |
| thumbnails_custom_color = 1 | |
| thumbnails_end_file = 0 | |
| thumbnails_format = PNG | |
| thumbnails_with_bed = 0 | |
| time_cost = 0 | |
| time_estimation_compensation = 100% | |
| time_start_gcode = 20 | |
| time_toolchange = 30 | |
| tool_name = "" | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| wipe_advanced = 0 | |
| wipe_advanced_algo = linear | |
| wipe_advanced_multiplier = 60 | |
| wipe_advanced_nozzle_melted_volume = 120 | |
| wipe_extra_perimeter = 0 | |
| wipe_inside_depth = 50% | |
| wipe_inside_end = 1 | |
| wipe_inside_start = 0 | |
| wipe_only_crossing = 1 | |
| wipe_speed = 0 | |
| z_offset = 0 | |
| z_step = 0.04 | |
| [presets] | |
| print = Gina - 100mms - 0.28 Layer Height | |
| sla_print = | |
| sla_material = | |
| printer = Gina | |
| filament = PETG Volt3d |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment