manual bonding configuration

manual bonding configuration.sh

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing. This file was generated by cede.
#
# This file describes the network interfaces available

modprobe bonding
echo 1      > /sys/class/net/bond0/bonding/mode
echo +eth0  > /sys/class/net/bond0/bonding/slaves
echo +eth1  > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add ${MGMT_ADDRESS}/20 broadcast ${MGMT_BROADCAST} dev ${MGMT_INTERFACE}
ip link set ${MGMT_INTERFACE} up


# 10gb bond
echo +${PUBLIC_BOND} > /sys/class/net/bonding_masters
echo 4      > /sys/class/net/bond1/bonding/mode
echo 100    > /sys/class/net/bond1/bonding/miimon
echo 200    > /sys/class/net/bond1/bonding/downdelay
echo 200    > /sys/class/net/bond1/bonding/updelay
echo 1      > /sys/class/net/bond1/bonding/xmit_hash_policy
echo 1      > /sys/class/net/bond1/bonding/ad_select
echo 1      > /sys/class/net/bond1/bonding/lacp_rate
echo +eth2  > /sys/class/net/bond1/bonding/slaves
echo +eth3  > /sys/class/net/bond1/bonding/slaves
ip link set bond1 up

# Interfaces
ip link add link ${IPMI_BOND} name ${IPMI_INTERFACE} type vlan id ${IPMI_VLAN}
ip addr add ${IPMI_ADDRESS}/24 broadcast ${IPMI_BROADCAST} dev ${IPMI_INTERFACE}
ip link set ${IPMI_INTERFACE} up

ip link add link ${OPS_BOND} name ${OPS_INTERFACE} type vlan id ${OPS_VLAN}
ip addr add ${OPS_ADDRESS}/20 broadcast ${OPS_BROADCAST} dev ${OPS_INTERFACE}
ip link set ${OPS_INTERFACE} up

ip link add link ${PUBLIC_BOND} name ${PUBLIC_INTERFACE} type vlan id ${PUBLIC_VLAN}
ip addr add ${PUBLIC_ADDRESS}/24 broadcast ${PUBLIC_BROADCAST} dev ${PUBLIC_INTERFACE}
ip link set ${PUBLIC_INTERFACE} up
ip route add default via ${PUBLIC_GATEWAY} dev ${PUBLIC_INTERFACE}

exit 0