Created
November 19, 2013 21:47
-
-
Save jameskyle/7553144 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/usr/bin/env bash | |
# | |
# Copyright 2011, AT&T Services, Inc. | |
# | |
# All rights reserved - Do Not Redistribute | |
# | |
# Next we have to fix udev. Since all of our hardware is the same, we can do it this way to make sure all deviceds are always the same | |
cat <<EOF >/etc/udev/rules.d/70-persistent-net.rules | |
# This file was generated by cede. | |
# | |
# You can modify it, as long as you keep each rule on a single | |
# line, and change only the value of the NAME= key. | |
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", KERNELS=="0000:06:00.0", NAME="eth0" | |
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", KERNELS=="0000:06:00.1", NAME="eth1" | |
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", KERNELS=="0000:03:00.0", NAME="eth2" | |
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", KERNELS=="0000:03:00.1", NAME="eth3" | |
EOF | |
cat <<EOF > /etc/network/interfaces | |
# This file was generated by cede. | |
# | |
# This file describes the network interfaces available on your system | |
# and how to activate them. For more information, see interfaces(5). | |
# The loopback network interface | |
auto lo | |
iface lo inet loopback | |
EOF | |
cat <<EOF > /etc/rc.local | |
#!/bin/sh -e | |
# | |
# rc.local | |
# | |
# This script is executed at the end of each multiuser runlevel. | |
# Make sure that the script will "exit 0" on success or any other | |
# value on error. | |
# | |
# In order to enable or disable this script just change the execution | |
# bits. | |
# | |
# By default this script does nothing. This file was generated by cede. | |
# | |
# This file describes the network interfaces available | |
modprobe bonding | |
echo 1 > /sys/class/net/bond0/bonding/mode | |
echo +eth0 > /sys/class/net/bond0/bonding/slaves | |
echo +eth1 > /sys/class/net/bond0/bonding/slaves | |
ip link set bond0 up | |
dhclient bond0 | |
# 10gb bond | |
echo +bond1 > /sys/class/net/bonding_masters | |
echo 4 > /sys/class/net/bond1/bonding/mode | |
echo 100 > /sys/class/net/bond1/bonding/miimon | |
echo 200 > /sys/class/net/bond1/bonding/downdelay | |
echo 200 > /sys/class/net/bond1/bonding/updelay | |
echo 1 > /sys/class/net/bond1/bonding/xmit_hash_policy | |
echo 1 > /sys/class/net/bond1/bonding/ad_select | |
echo 1 > /sys/class/net/bond1/bonding/lacp_rate | |
echo +eth2 > /sys/class/net/bond1/bonding/slaves | |
echo +eth3 > /sys/class/net/bond1/bonding/slaves | |
ip link set bond1 up | |
# Interfaces | |
ip link add link bond0 name bond0.198 type vlan id 198 | |
ip link set bond0.198 up | |
#dhclient bond0.198 | |
ip link add link bond1 name bond1.2001 type vlan id 2001 | |
ip link set bond1.2001 up | |
dhclient bond1.2001 | |
ip link add link bond1 name bond1.2002 type vlan id 2002 | |
ip link set bond1.2002 up | |
exit 0 | |
EOF |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment