Created
February 28, 2023 15:08
-
-
Save jamesxmcintosh/86b110c3df65db941512c6e699c0bbae to your computer and use it in GitHub Desktop.
SMART Report
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.1-arch1-1] (local build) | |
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Device Model: SSD 1TB | |
Serial Number: 2023011300110 | |
LU WWN Device Id: 0 000000 000000000 | |
Firmware Version: HPS2704D | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Size: 512 bytes logical/physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
TRIM Command: Available | |
Device is: Not in smartctl database 7.3/5319 | |
ATA Version is: ACS-2 T13/2015-D revision 3 | |
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) | |
Local Time is: Wed Mar 1 01:51:19 2023 AEDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x00) Offline data collection not supported. | |
SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. | |
Error logging capability: (0x00) Error logging supported. | |
General Purpose Logging supported. | |
SMART Attributes Data Structure revision number: 1 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 | |
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 19 | |
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 4 | |
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 | |
161 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 | |
163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 | |
164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 | |
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7 | |
166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 | |
167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 | |
168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 | |
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 | |
175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 16777216 | |
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 | |
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 16787504 | |
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 | |
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 2 | |
194 Temperature_Celsius 0x0032 100 100 050 Old_age Always - 40 | |
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 | |
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 | |
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 | |
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 | |
241 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 30552 | |
242 Total_LBAs_Read 0x0032 100 100 050 Old_age Always - 29824 | |
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 59671 | |
SMART Error Log Version: 1 | |
ATA Error Count: 581 (device log contains only the most recent five errors) | |
CR = Command Register [HEX] | |
FR = Features Register [HEX] | |
SC = Sector Count Register [HEX] | |
SN = Sector Number Register [HEX] | |
CL = Cylinder Low Register [HEX] | |
CH = Cylinder High Register [HEX] | |
DH = Device/Head Register [HEX] | |
DC = Device Command Register [HEX] | |
ER = Error register [HEX] | |
ST = Status register [HEX] | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 581 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 40 90 00 00 00 00 at LBA = 0x00000000 = 0 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
60 08 90 00 00 00 40 08 02:13:52.200 READ FPDMA QUEUED | |
ef 10 02 00 00 00 a0 08 02:13:52.200 SET FEATURES [Enable SATA feature] | |
ec 00 00 00 00 00 a0 08 02:13:52.200 IDENTIFY DEVICE | |
ef 03 46 00 00 00 a0 08 02:13:52.200 SET FEATURES [Set transfer mode] | |
ef 10 02 00 00 00 a0 08 02:13:52.200 SET FEATURES [Enable SATA feature] | |
Error 580 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 40 88 00 00 00 00 at LBA = 0x00000000 = 0 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
60 08 88 00 00 00 40 08 02:13:52.120 READ FPDMA QUEUED | |
ef 10 02 00 00 00 a0 08 02:13:52.100 SET FEATURES [Enable SATA feature] | |
ec 00 00 00 00 00 a0 08 02:13:52.100 IDENTIFY DEVICE | |
ef 03 46 00 00 00 a0 08 02:13:52.090 SET FEATURES [Set transfer mode] | |
ef 10 02 00 00 00 a0 08 02:13:52.090 SET FEATURES [Enable SATA feature] | |
Error 579 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 a0 00 00 00 00 7f | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
ec 00 00 00 00 00 a0 08 02:13:41.830 IDENTIFY DEVICE | |
51 04 01 01 00 00 00 ff 02:13:40.860 CONFIGURE STREAM | |
Error 578 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 00 01 01 00 00 51 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
51 04 01 01 00 00 00 ff 02:13:40.860 CONFIGURE STREAM | |
Error 577 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 00 01 01 00 00 51 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
51 04 01 01 00 00 00 ff 02:13:40.860 CONFIGURE STREAM | |
SMART Self-test log structure revision number 0 | |
Warning: ATA Specification requires self-test log structure revision number = 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
Selective Self-tests/Logging not supported |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment