Mbed CLI install script

debian64.sh

#!/bin/bash

cwd=$(pwd)
DIR=$(dirname $(readlink -f $0))

echo "This application will install Mbed CLI..."

sudo apt-get update
sudo apt -y install dh-autoreconf build-essential libncurses5-dev

if which screen | grep -q 'screen'; then
    echo "OK - Screen installed"
else
    echo "NOK - Screen not installed, installing..."

    # extract and build screen
    tar -xzf "$DIR/Section-1/screen-4.6.1.tar.gz" #q: need v?
    cd "$DIR/Section-1/screen-4.6.1"
    ./autogen.sh
    ./configure
    make
    sudo make install
    cd $cwd
fi

if dpkg -s zlib1g-dev | grep -q 'install ok installed'; then
    echo "OK - zlib1g-dev installed"
else
    echo "NOK - zlib1g-dev installed"

    sudo apt -y install zlib1g-dev
    # sudo dpkg -i "$DIR/Section-2/zlib1g-dev_1.2.8.dfsg-5_i386.deb"
fi

if which python | grep -q 'python'; then
    echo "OK - Python installed"
else
    echo "NOK - Python not installed, installing..."

    tar -xvzf "$DIR/Section-2/Python-2.7.11.tgz"
    cd "$DIR/Section-2/Python-2.7.11"
    ./configure
    make
    sudo make install
    cd $cwd
fi

python_version=$(python --version 2>&1 | sed 's/.* \([0-9]\).\([0-9]\).*/\1\2/')
if [ "$python_version" -eq "27" ]; then
    echo "OK - Python 2.7 configured as default python"
else
    echo "NOK - Python version is not 2.7, did you alias python3 to python? This is a problem that I can't fix."
    exit 1
fi

if which git | grep -q 'git'; then
    echo "OK - Git installed"
else
    echo "NOK - Git not installed, installing..."

    cd "$DIR/Section-2"
    tar -xvzf "$DIR/Section-2/git-2.9.5.tar.gz"
    cd "$DIR/Section-2/git-2.9.5"
    ./configure
    make
    sudo make install
    cd $cwd
fi

if which hg | grep -q 'hg'; then
    echo "OK - Mercurial installed"
else
    echo "NOK - Mercurial not installed, installing..."

    cd "$DIR/Section-2"
    tar -xvzf "$DIR/Section-2/mercurial-4.4-rc.tar.gz"
    cd "$DIR/Section-2/mercurial-4.4-rc"

    # mercurial needs python-dev...
    sudo apt -y install python-dev

    sudo make install
    cd $cwd
fi

if which pip | grep -q 'pip'; then
    echo "OK - Pip installed"
else
    echo "NOK - Pip not installed, installing..."

    # setuptools
    unzip "$DIR/Section-2/setuptools-36.6.0.zip" -d "$DIR/Section-2"
    cd "$DIR/Section-2/setuptools-36.6.0"
    python bootstrap.py
    sudo python setup.py install
    cd $cwd

    # pip
    unzip "$DIR/Section-2/pip-9.0.1.zip" -d "$DIR/Section-2"
    cd "$DIR/Section-2/pip-9.0.1"
    sudo python setup.py install
    cd $cwd
fi

if [ -d "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update" ]; then
    echo "OK - GCC ARM 6 already extracted"
else
    echo "NOK - GCC ARM 6 not extracted, installing..."

    cd "$DIR/Section-2"
    tar xvjf "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz2"
    cd $cwd
fi

if which mbed | grep -q 'mbed'; then
    echo "OK - Mbed CLI installed"
else
    echo "NOK - Mbed CLI not installed, installing..."

    if [ -d "$DIR/Section-2/mbed-cli-1.2.2" ]; then
        echo "Mbed CLI already extracted..."
    else
        unzip "$DIR/Section-2/mbed-cli-1.2.2.zip" -d "$DIR/Section-2"
    fi

    cd "$DIR/Section-2/mbed-cli-1.2.2/"
    sudo python setup.py install
    cd $cwd

    echo "Installing Mbed CLI requirements..."

    sudo pip install "$DIR/../mbed-cli-requirements/setuptools_scm-1.15.6-py2.py3-none-any.whl"
    sudo pip install --find-links "$DIR/../mbed-cli-requirements/" -r "$DIR/../mbed-connect-blinky/mbed-os/requirements.txt"
fi

if mbed config -G GCC_ARM_PATH 2>&1 | grep -q 'No global'; then
    echo "NOK - No global GCC_ARM_PATH set, setting..."

    mbed config -G GCC_ARM_PATH "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update/bin"
else
    echo "OK - Global GCC_ARM_PATH set"
fi

# needed for debugging
if [ -f /usr/bin/arm-none-eabi-gdb ]; then
    echo "OK - arm-none-eabi-gdb in /usr/bin"
else
    echo "NOK - arm-none-eabi-gdb not in /usr/bin, linking..."

    sudo ln -s "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update/bin/arm-none-eabi-gdb" /usr/bin/arm-none-eabi-gdb
fi

if which pyocd-gdbserver | grep -q 'pyocd-gdbserver'; then
    echo "OK - pyocd-gdbserver installed and in PATH"
else
    echo "OK - pyocd-gdbserver not installed, or not in PATH"

    pip install pyocd
fi

if which manifest-tool | grep -q 'manifest-tool'; then
    echo "OK - manifest-tool installed"
else
    echo "OK - manifest-tool not installed"

    unzip "$DIR/../manifest-tool-restricted-mbed-connect.zip" -d "$DIR/Section-2"
    cd "$DIR/Section-2/manifest-tool-restricted-mbed-connect"
    sudo pip install .
    cd $cwd
fi

# fix missing packages... (zlib)
sudo apt -f install

macos.sh

#!/bin/bash

cwd=$(pwd)
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"

echo "This application will install Mbed CLI..."

if which python | grep -q 'python'; then
    echo "OK - Python installed"
else
    echo "NOK - Python not installed, installing..."

    sudo installer -pkg "$DIR/Section-2/python-2.7.11-macosx10.6.pkg" -target /
fi

python_version=$(python --version 2>&1 | sed 's/.* \([0-9]\).\([0-9]\).*/\1\2/')
if [ "$python_version" -eq "27" ]; then
    echo "OK - Python 2.7 configured as default python"
else
    echo "NOK - Python version is not 2.7, did you alias python3 to python? This is a problem that I can't fix."
    exit 1
fi

if which pip | grep -q 'pip'; then
    echo "OK - Pip installed"
else
    echo "NOK - Pip not installed, installing..."

    cd "$DIR/Section-2"
    unzip "$DIR/Section-2/pip-9.0.1.zip"
    sudo python "$DIR/Section-2/pip-9.0.1/setup.py" install
    cd $cwd
fi

if which git | grep -q 'git'; then
    echo "OK - Git installed"
else
    echo "NOK - Git not installed, installing..."
    echo "\tMounting Git dmg"

    # mount and install git
    open "$DIR/Section-2/git-2.14.1-intel-universal-mavericks.dmg"
    sleep 7
    sudo installer -pkg "/Volumes/Git 2.14.1 Mavericks Intel Universal/git-2.14.1-intel-universal-mavericks.pkg" -target /
fi

if which hg | grep -q 'hg'; then
    echo "OK - Mercurial installed"
else
    echo "NOK - Mercurial not installed, installing..."

    sudo installer -pkg "$DIR/Section-2/Mercurial-4.3.3-macosx10.12.pkg" -target /
fi

if [ -d "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update" ]; then
    echo "OK - GCC ARM 6 already extracted"
else
    echo "NOK - GCC ARM 6 not extracted, installing..."

    open "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update-mac.tar.bz2"
fi

if which mbed | grep -q 'mbed'; then
    echo "OK - Mbed CLI installed"
else
    echo "NOK - Mbed CLI not installed, installing..."

    if [ -d "$DIR/Section-2/mbed-cli-1.2.2" ]; then
        echo "Mbed CLI already extracted..."
    else
        unzip "$DIR/Section-2/mbed-cli-1.2.2.zip" -d "$DIR/Section-2"
    fi

    cd "$DIR/Section-2/mbed-cli-1.2.2/"
    sudo python setup.py install
    cd $cwd

    echo "Installing Mbed CLI requirements..."

    pip install "$DIR/../mbed-cli-requirements/setuptools_scm-1.15.6-py2.py3-none-any.whl"
    pip install --find-links "$DIR/../mbed-cli-requirements/" -r "$DIR/../mbed-connect-blinky/mbed-os/requirements.txt"

    echo "Linking Mbed CLI..."
    ln -s /Library/Frameworks/Python.framework/Versions/2.7/bin/mbed /usr/local/bin/mbed
fi

if mbed config -G GCC_ARM_PATH 2>&1 | grep -q 'No global'; then
    echo "NOK - No global GCC_ARM_PATH set, setting..."

    mbed config -G GCC_ARM_PATH "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update/bin"
else
    echo "OK - Global GCC_ARM_PATH set"
fi

# needed for debugging
if [ -f /usr/local/bin/arm-none-eabi-gdb ]; then
    echo "OK - arm-none-eabi-gdb in /usr/local/bin"
else
    echo "NOK - arm-none-eabi-gdb not in /usr/local/bin, linking..."

    ln -s "$DIR/Section-2/gcc-arm-none-eabi-6-2017-q2-update/bin/arm-none-eabi-gdb" /usr/local/bin/arm-none-eabi-gdb
fi

if which pyocd-gdbserver | grep -q 'pyocd-gdbserver'; then
    echo "OK - pyocd-gdbserver installed and in PATH"
else
    echo "OK - pyocd-gdbserver not installed, or not in PATH"

    pip install pyocd
fi

if which manifest-tool | grep -q 'manifest-tool'; then
    echo "OK - manifest-tool installed"
else
    echo "OK - manifest-tool not installed"

    unzip "$DIR/../manifest-tool-restricted-mbed-connect.zip" -d "$DIR/Section-2"
    cd "$DIR/Section-2/manifest-tool-restricted-mbed-connect"
    pip install .
    cd $cwd
fi