Created
January 7, 2016 15:04
-
-
Save jasiek/0d8f575dab5da0f7c75e to your computer and use it in GitHub Desktop.
Raspberry Pi 2+ dmesg using a Sandisk Extreme Pro card.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0xf00 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 3.18.0-25-rpi2 (buildd@lgw01-08) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04) ) #26-Ubuntu SMP PREEMPT Sun Jul 5 06:46:34 UTC 2015 (Ubuntu 3.18.0-25.26-rpi2 3.18.17) | |
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] Machine: BCM2709 | |
[ 0.000000] cma: Reserved 8 MiB at 0x38800000 | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] On node 0 totalpages: 233472 | |
[ 0.000000] free_area_init_node: node 0, pgdat 8095ecc0, node_mem_map b80d3000 | |
[ 0.000000] Normal zone: 1824 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 233472 pages, LIFO batch:31 | |
[ 0.000000] [bcm2709_smp_init_cpus] enter (85a0->f3003010) | |
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4 | |
[ 0.000000] PERCPU: Embedded 11 pages/cpu @b80a2000 s12928 r8192 d23936 u45056 | |
[ 0.000000] pcpu-alloc: s12928 r8192 d23936 u45056 alloc=11*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 231648 | |
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0xc5e1c6aa smsc95xx.macaddr=B8:27:EB:E1:C6:AA bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootwait | |
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] allocated 1867776 bytes of page_cgroup | |
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
[ 0.000000] Memory: 905100K/933888K available (6339K kernel code, 564K rwdata, 2360K rodata, 364K init, 806K bss, 28788K reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
[ 0.000000] vmalloc : 0xb9800000 - 0xff000000 (1112 MB) | |
[ 0.000000] lowmem : 0x80000000 - 0xb9000000 ( 912 MB) | |
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
[ 0.000000] .text : 0x80008000 - 0x80886f3c (8700 kB) | |
[ 0.000000] .init : 0x80887000 - 0x808e2000 ( 364 kB) | |
[ 0.000000] .data : 0x808e2000 - 0x8096f36c ( 565 kB) | |
[ 0.000000] .bss : 0x8096f36c - 0x80a38da0 ( 807 kB) | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. | |
[ 0.000000] NR_IRQS:480 | |
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). | |
[ 0.000013] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns | |
[ 0.000031] Switching to timer-based delay loop, resolution 52ns | |
[ 0.000593] Console: colour dummy device 80x30 | |
[ 0.001428] console [tty1] enabled | |
[ 0.001466] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) | |
[ 0.001518] pid_max: default: 32768 minimum: 301 | |
[ 0.001777] Security Framework initialized | |
[ 0.001983] AppArmor: AppArmor initialized | |
[ 0.002010] Yama: becoming mindful. | |
[ 0.002338] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.002379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.003577] Initializing cgroup subsys memory | |
[ 0.003660] Initializing cgroup subsys devices | |
[ 0.003700] Initializing cgroup subsys freezer | |
[ 0.003736] Initializing cgroup subsys net_cls | |
[ 0.003777] Initializing cgroup subsys blkio | |
[ 0.003809] Initializing cgroup subsys perf_event | |
[ 0.003845] Initializing cgroup subsys net_prio | |
[ 0.004050] CPU: Testing write buffer coherency: ok | |
[ 0.004597] missing device node for CPU 0 | |
[ 0.004629] missing device node for CPU 1 | |
[ 0.004652] missing device node for CPU 2 | |
[ 0.004674] missing device node for CPU 3 | |
[ 0.004704] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 | |
[ 0.004731] [bcm2709_smp_prepare_cpus] enter | |
[ 0.004875] Setting up static identity map for 0x6066b0 - 0x606708 | |
[ 0.044842] [bcm2709_boot_secondary] cpu:1 started (0) 17 | |
[ 0.045149] CPU1: Booted secondary processor | |
[ 0.045157] [bcm2709_secondary_init] enter cpu:1 | |
[ 0.045209] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 | |
[ 0.052817] [bcm2709_boot_secondary] cpu:2 started (0) 17 | |
[ 0.053069] CPU2: Booted secondary processor | |
[ 0.053075] [bcm2709_secondary_init] enter cpu:2 | |
[ 0.053106] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 | |
[ 0.060787] [bcm2709_boot_secondary] cpu:3 started (0) 18 | |
[ 0.061029] CPU3: Booted secondary processor | |
[ 0.061035] [bcm2709_secondary_init] enter cpu:3 | |
[ 0.061065] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 | |
[ 0.061162] Brought up 4 CPUs | |
[ 0.061244] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
[ 0.061271] CPU: All CPU(s) started in SVC mode. | |
[ 0.062256] devtmpfs: initialized | |
[ 0.082009] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
[ 0.091136] pinctrl core: initialized pinctrl subsystem | |
[ 0.091985] NET: Registered protocol family 16 | |
[ 0.097546] DMA: preallocated 4096 KiB pool for atomic coherent allocations | |
[ 0.108673] cpuidle: using governor ladder | |
[ 0.120689] cpuidle: using governor menu | |
[ 0.120998] bcm2709.uart_clock = 3000000 | |
[ 0.124830] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
[ 0.124874] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
[ 0.124928] mailbox: Broadcom VideoCore Mailbox driver | |
[ 0.125047] bcm2708_vcio: mailbox at f300b880 | |
[ 0.125158] bcm_power: Broadcom power driver | |
[ 0.125187] bcm_power_open() -> 0 | |
[ 0.125208] bcm_power_request(0, 8) | |
[ 0.625882] bcm_mailbox_read -> 00000080, 0 | |
[ 0.625909] bcm_power_request -> 0 | |
[ 0.626143] Serial: AMBA PL011 UART driver | |
[ 0.626279] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 | |
[ 0.680776] SCSI subsystem initialized | |
[ 0.681037] usbcore: registered new interface driver usbfs | |
[ 0.681173] usbcore: registered new interface driver hub | |
[ 0.681292] usbcore: registered new device driver usb | |
[ 0.682961] NetLabel: Initializing | |
[ 0.682990] NetLabel: domain hash size = 128 | |
[ 0.683013] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 0.683106] NetLabel: unlabeled traffic allowed by default | |
[ 0.683529] Switched to clocksource arch_sys_counter | |
[ 0.746713] FS-Cache: Loaded | |
[ 0.747135] CacheFiles: Loaded | |
[ 0.747662] AppArmor: AppArmor Filesystem Enabled | |
[ 0.763958] NET: Registered protocol family 2 | |
[ 0.765203] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.765369] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.765583] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.765713] TCP: reno registered | |
[ 0.765746] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.765825] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.766214] NET: Registered protocol family 1 | |
[ 0.766868] RPC: Registered named UNIX socket transport module. | |
[ 0.766905] RPC: Registered udp transport module. | |
[ 0.766930] RPC: Registered tcp transport module. | |
[ 0.766955] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.767962] bcm2708_dma: DMA manager at f3007000 | |
[ 0.768115] bcm2708_gpio: bcm2708_gpio_probe 80908658 | |
[ 0.768797] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) | |
[ 0.771254] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
[ 0.771508] audit: initializing netlink subsys (disabled) | |
[ 0.771727] audit: type=2000 audit(0.767:1): initialized | |
[ 0.773193] zpool: loaded | |
[ 0.773714] VFS: Disk quotas dquot_6.5.2 | |
[ 0.773829] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 0.775073] FS-Cache: Netfs 'nfs' registered for caching | |
[ 0.775485] NFS: Registering the id_resolver key type | |
[ 0.775659] Key type id_resolver registered | |
[ 0.775688] Key type id_legacy registered | |
[ 0.775742] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.776366] msgmni has been set to 1783 | |
[ 0.779759] alg: No test for stdrng (krng) | |
[ 0.779961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
[ 0.780195] io scheduler noop registered | |
[ 0.780232] io scheduler deadline registered | |
[ 0.780322] io scheduler cfq registered (default) | |
[ 0.781960] BCM2708FB: allocated DMA memory f8c00000 | |
[ 0.782024] BCM2708FB: allocated DMA channel 0 @ f3007000 | |
[ 0.787643] Console: switching to colour frame buffer device 82x26 | |
[ 0.793470] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver | |
[ 0.795281] uart-pl011 dev:f1: no DMA platform data | |
[ 0.797403] vc-cma: Videocore CMA driver | |
[ 0.798873] vc-cma: vc_cma_base = 0x00000000 | |
[ 0.800408] vc-cma: vc_cma_size = 0x00000000 (0 MiB) | |
[ 0.801839] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) | |
[ 0.816103] brd: module loaded | |
[ 0.824210] loop: module loaded | |
[ 0.825903] vchiq: vchiq_init_state: slot_zero = 0xb8800000, is_master = 0 | |
[ 0.828252] Loading iSCSI transport class v2.0-870. | |
[ 0.830508] usbcore: registered new interface driver smsc95xx | |
[ 0.832011] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
[ 1.033753] Core Release: 2.80a | |
[ 1.035132] Setting default values for core params | |
[ 1.036538] Finished setting default values for core params | |
[ 1.238234] Using Buffer DMA mode | |
[ 1.239630] Periodic Transfer Interrupt Enhancement - disabled | |
[ 1.241075] Multiprocessor Interrupt Enhancement - disabled | |
[ 1.242527] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
[ 1.244015] Dedicated Tx FIFOs mode | |
[ 1.245851] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb8c14000 dma = 0xf8c14000 len=9024 | |
[ 1.248805] FIQ FSM acceleration enabled for : | |
[ 1.248805] Non-periodic Split Transactions | |
[ 1.248805] Periodic Split Transactions | |
[ 1.248805] High-Speed Isochronous Endpoints | |
[ 1.254648] dwc_otg: Microframe scheduler enabled | |
[ 1.254720] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8046174c | |
[ 1.256271] WARN::hcd_init_fiq:413: FIQ ASM at 0x80461a80 length 36 | |
[ 1.257828] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb9808000 | |
[ 1.259352] dwc_otg bcm2708_usb: DWC OTG Controller | |
[ 1.260899] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 | |
[ 1.262459] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 | |
[ 1.264007] Init: Port Power? op_state=1 | |
[ 1.265456] Init: Power Port (0) | |
[ 1.267132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.268658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.270149] usb usb1: Product: DWC OTG Controller | |
[ 1.271626] usb usb1: Manufacturer: Linux 3.18.0-25-rpi2 dwc_otg_hcd | |
[ 1.273105] usb usb1: SerialNumber: bcm2708_usb | |
[ 1.275584] hub 1-0:1.0: USB hub found | |
[ 1.277080] hub 1-0:1.0: 1 port detected | |
[ 1.279173] dwc_otg: FIQ enabled | |
[ 1.279186] dwc_otg: NAK holdoff enabled | |
[ 1.279196] dwc_otg: FIQ split-transaction FSM enabled | |
[ 1.279235] Module dwc_common_port init | |
[ 1.279638] usbcore: registered new interface driver usb-storage | |
[ 1.281413] mousedev: PS/2 mouse device common for all mice | |
[ 1.283049] i2c /dev entries driver | |
[ 1.285079] device-mapper: uevent: version 1.0.3 | |
[ 1.286820] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com | |
[ 1.289854] bcm2835-cpufreq: min=600000 max=900000 | |
[ 1.291661] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.293194] sdhci: Copyright(c) Pierre Ossman | |
[ 1.294849] DMA channels allocated for the MMC driver | |
[ 1.323572] Load BCM2835 MMC driver | |
[ 1.326592] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.335088] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.336870] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 1.339650] usbcore: registered new interface driver usbhid | |
[ 1.343263] usbhid: USB HID core driver | |
[ 1.346261] TCP: cubic registered | |
[ 1.347836] Initializing XFRM netlink socket | |
[ 1.351632] NET: Registered protocol family 10 | |
[ 1.354277] mip6: Mobile IPv6 | |
[ 1.355845] NET: Registered protocol family 17 | |
[ 1.357472] Key type dns_resolver registered | |
[ 1.358933] mpls_gso: MPLS GSO support | |
[ 1.360707] Registering SWP/SWPB emulation handler | |
[ 1.363432] registered taskstats version 1 | |
[ 1.365064] AppArmor: AppArmor sha1 policy hashing enabled | |
[ 1.366557] vc-sm: Videocore shared memory driver | |
[ 1.367969] [vc_sm_connected_init]: start | |
[ 1.370165] [vc_sm_connected_init]: end - returning 0 | |
[ 1.372296] PM: Hibernation image not present or could not be loaded. | |
[ 1.372857] Waiting for root device /dev/mmcblk0p2... | |
[ 1.376222] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ 1.381636] mmc0: new high speed SDHC card at address e624 | |
[ 1.383766] mmcblk0: mmc0:e624 SE16G 14.8 GiB | |
[ 1.386493] mmcblk0: p1 p2 | |
[ 1.476154] Indeed it is in host mode hprt0 = 00021501 | |
[ 1.479636] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities | |
[ 1.483591] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities | |
[ 1.655630] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
[ 1.657454] Indeed it is in host mode hprt0 = 00001101 | |
[ 1.851912] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 | |
[ 1.853706] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 1.856711] hub 1-1:1.0: USB hub found | |
[ 1.858590] hub 1-1:1.0: 5 ports detected | |
[ 2.009473] EXT4-fs (mmcblk0p2): 5 orphan inodes deleted | |
[ 2.011214] EXT4-fs (mmcblk0p2): recovery complete | |
[ 2.030310] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 2.033830] VFS: Mounted root (ext4 filesystem) on device 179:2. | |
[ 2.038545] devtmpfs: mounted | |
[ 2.040855] Freeing unused kernel memory: 364K (80887000 - 808e2000) | |
[ 2.131708] usb 1-1.1: new high-speed USB device number 3 using dwc_otg | |
[ 2.235950] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
[ 2.237859] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 2.242801] smsc95xx v1.0.4 | |
[ 2.295462] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e1:c6:aa | |
[ 2.343211] random: init urandom read with 85 bits of entropy available | |
[ 2.521105] init: plymouth-upstart-bridge main process (78) terminated with status 1 | |
[ 2.525143] init: plymouth-upstart-bridge main process ended, respawning | |
[ 2.575886] init: plymouth-upstart-bridge main process (88) terminated with status 1 | |
[ 2.580256] init: plymouth-upstart-bridge main process ended, respawning | |
[ 2.626915] init: plymouth-upstart-bridge main process (92) terminated with status 1 | |
[ 2.631680] init: plymouth-upstart-bridge main process ended, respawning | |
[ 2.671350] init: plymouth-upstart-bridge main process (97) terminated with status 1 | |
[ 2.675488] init: plymouth-upstart-bridge main process ended, respawning | |
[ 3.968548] systemd-udevd[222]: starting version 204 | |
[ 4.143205] bcm2708_i2c_init_pinmode(1,2) | |
[ 4.143240] bcm2708_i2c_init_pinmode(1,3) | |
[ 4.151250] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000) | |
[ 4.177151] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated | |
[ 4.180430] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80) | |
[ 4.281134] fuse init (API version 7.23) | |
[ 4.302274] random: nonblocking pool is initialized | |
[ 4.352001] bcm2708_rng_init=b9e54000 | |
[ 6.817357] init: avahi-cups-reload main process (378) terminated with status 1 | |
[ 7.287896] audit: type=1400 audit(7.280:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=259 comm="apparmor_parser" | |
[ 7.291391] audit: type=1400 audit(7.280:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=259 comm="apparmor_parser" | |
[ 7.312938] audit: type=1400 audit(7.304:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=259 comm="apparmor_parser" | |
[ 7.486483] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup | |
[ 7.487200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ 7.903653] audit: type=1400 audit(7.892:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=318 comm="apparmor_parser" | |
[ 7.906899] audit: type=1400 audit(7.896:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=318 comm="apparmor_parser" | |
[ 7.909858] audit: type=1400 audit(7.900:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=318 comm="apparmor_parser" | |
[ 8.248917] init: failsafe main process (460) killed by TERM signal | |
[ 8.582154] audit: type=1400 audit(8.572:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=328 comm="apparmor_parser" | |
[ 8.585814] audit: type=1400 audit(8.576:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser" | |
[ 8.588810] audit: type=1400 audit(8.580:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser" | |
[ 9.153639] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
[ 9.154977] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 | |
[ 10.179951] audit: type=1400 audit(10.172:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=602 comm="apparmor_parser" | |
[ 12.597832] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 12.630121] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 14.035684] i2c i2c-1: new_device: Instantiated device ds1307 at 0x68 | |
[ 14.047978] rtc-ds1307 1-0068: rtc core: registered ds1307 as rtc0 | |
[ 14.048011] rtc-ds1307 1-0068: 56 bytes nvram | |
[ 14.195491] init: plymouth-upstart-bridge main process ended, respawning | |
[71630.737914] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.737971] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.757454] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.757511] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.776804] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.776864] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.796236] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.796298] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.815612] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.815671] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.835764] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.835875] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.855863] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.855925] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.875442] Program dmidecode tried to access /dev/mem between f0000->100000. | |
[71630.875503] Program dmidecode tried to access /dev/mem between f0000->100000. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment