test_hierarchy_inference.json

{
  "over_inferences": {
    "https://brickschema.org/schema/1.1.0/Brick#Run_Enable_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Run_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Start_Stop_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Run_Enable_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Run_Enable_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Heating_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Minimum_Discharge_Air_Temperature_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Chilled_Water_Differential_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Chilled_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Chilled_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Hot_Water_Differential_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Hot_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Hot_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#HVAC_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_Air_Flow_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Air_Flow_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Rooftop_Unit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#AHU",
        "https://brickschema.org/schema/1.1.0/Brick#RTU",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Handler_Unit",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Rooftop_Unit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#AHU",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Rooftop_Unit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Chilled_Water_Differential_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Chilled_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Chilled_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Reheat_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Reheat_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Reheat_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Supply_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Supply_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Discharge_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Supply_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan_Air_Flow_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Zone_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Coil_Entering_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Coil_Entering_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Coil_Entering_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Proportional_Band_Parameter"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Proportional_Band_Parameter"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan_Air_Flow_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Percent_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Percent_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Percent_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Lowest_Exhaust_Air_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Lowest_Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Lowest_Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Return_Damper_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Overridden_On_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Damper_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Reset_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Reset_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Reset_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Standby_Glycool_Unit_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Unit_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Glycool_Unit_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Glycool_Unit_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Supply_Temperature_Load_Shed_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Supply_Temperature_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Supply_Temperature_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Coil_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Maximum_Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Cooling_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Thermal_Energy_Storage_Supply_Water_Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Thermal_Energy_Storage_Supply_Water_Differential_Pressure_Dead_Band_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Thermal_Energy_Storage_Supply_Water_Differential_Pressure_Dead_Band_Setpoint"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Dehumidification_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Dehumidification_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Dehumidification_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Proportional_Band",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Proportional_Band_Parameter"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Proportional_Band_Parameter"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Deionised_Water_Level_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Deionised_Water_Level_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#DI_Water_Level_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Level_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Deionised_Water_Level_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Level_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Water_Differential_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Proportional_Band",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Proportional_Band_Parameter"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Differential_Pressure_Proportional_Band_Parameter"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Supply_Air_Flow_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Valve"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Valve"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Return_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Return_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Return_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Cooling_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Maximum_Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Cooling_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Cooling_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Remotely_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Remotely_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Remotely_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Hot_Water_Differential_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Hot_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Hot_Water_Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Highest_Zone_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Warmest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Highest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Highest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Proportional_Band",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Outside_Damper_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Outside_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Outside_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heat_Wheel_Discharge_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Wheel_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Wheel_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Damper_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Damper"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_Supply_Water_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Average_Exhaust_Air_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Average_Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Average_Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Preheat_Hot_Water_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Preheat_Hot_Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Preheat_Hot_Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#HVAC_Zone_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Zone",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC_Zone",
        "https://brickschema.org/schema/1.1.0/Brick#Location",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Location",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC_Zone",
        "https://brickschema.org/schema/1.1.0/Brick#Zone"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#EconCycle_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#EconCycle_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#EconCycle_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Overridden_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Overridden_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Speed_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Turn_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Turn_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Turn_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Standby_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Proportional_Band",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#On_Off_Command_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Command",
        "https://brickschema.org/schema/1.1.0/Brick#Start_Stop_Command",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Command"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Command",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Command"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Discharge_Flow_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Supply_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Discharge_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Flow_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Discharge_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Water_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Flow_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Coil_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Stack_Flow_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Stack_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Stack_Flow_Dead_Band_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Stack_Flow_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Proportional_Band_Parameter"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Discharge_Air_Temperature_Proportional_Band_Parameter"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Speed_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#AHU_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#AHU",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Handler_Unit",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#AHU"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Entering_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Entering_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Entering_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Entering_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Fan"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Fault_Indicator_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Fault_Indicator_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Fault_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Fault_Indicator_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Load_Shed_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Load_Shed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Load_Shed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Last_Fault_Code_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Last_Fault_Code_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Fault_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Last_Fault_Code_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Lowest_Zone_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Lowest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Coldest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Lowest_Zone_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Pump_Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Pump_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Pump_Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Leaving_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Leaving_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#PreHeat_Coil_Leaving_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Leaving_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Preheat_Discharge_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Preheat_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Preheat_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Damper_Position_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Damper_Position_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Damper_Position_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Isolation_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Isolation_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Isolation_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_System_Enable_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_System_Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#System_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Heat_Exchanger_System_Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Unoccupied_Cooling_Supply_Air_Flow_Setpoint_Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Enable_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Enable_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Emergency_Power_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Heating_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Heating_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Minimum_Discharge_Air_Temperature_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Heating_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Medium_Temperature_Hot_Water_Differential_Pressure_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#System_Mode_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#System_Mode_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#System_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Mode_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#System_Mode_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Mode_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Humidification_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Humidification_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Humidification_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Supply_Air_Flow_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Outside_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Outside_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Outside_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Outside_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Percent_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Percent_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Demand_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Request_Percent_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Discharge_Air_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Discharge_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Discharge_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Supply_Air_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Supply_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Supply_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Locally_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Locally_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Locally_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Domestic_Hot_Water_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_System",
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Domestic_Hot_Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Domestic_Hot_Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Valve"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Economizer_Damper_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Economizer_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Damper",
        "https://brickschema.org/schema/1.1.0/Brick#Economizer_Damper",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Discharge_Temperature_Load_Shed_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Discharge_Temperature_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Discharge_Temperature_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Proportional_Band_Parameter_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Temperature_Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Proportional_Band_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#PID_Parameter",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Run_Direction_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Run_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Run_Direction_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Direction_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Start_Stop_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Run_Direction_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Direction_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Damper_Position_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Damper_Position_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Damper_Position_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Damper_Position_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#High_Static_Pressure_Cutout_Limit_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#High_Static_Pressure_Cutout_Limit_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#High_Static_Pressure_Cutout_Limit_Setpoint"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Fan_Start_Stop_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Start_Stop_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Start_Stop_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Start_Stop_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Fan_Start_Stop_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil_Discharge_Air_Temperature_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil_Discharge_Air_Temperature_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Sensor"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Discharge_Air_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Discharge_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Discharge_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Static_Pressure_Setpoint_Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#System_Shutdown_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#System_Shutdown_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#System_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#System_Shutdown_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Max_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Max_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Temperature_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Dead_Band_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Booster_Fan_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Booster_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Booster_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Fan",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Fan",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Differential_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Chilled_Water_Differential_Pressure_Load_Shed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Heating_Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Heating_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Return_Discharge_Fan_Differential_Speed_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Discharge_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Discharge_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Coil",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Coil"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Water_Valve_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Heating_Ventilation_Air_Conditioning_System",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Water_Valve",
        "https://brickschema.org/schema/1.1.0/Brick#Valve",
        "https://brickschema.org/schema/1.1.0/Brick#HVAC",
        "https://brickschema.org/schema/1.1.0/Brick#Equipment",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Occupied_Cooling_Supply_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Setpoint"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Supply_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Supply_Air_Static_Pressure_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Supply_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Min_Supply_Air_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Static_Pressure_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Average_Supply_Air_Flow_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Average_Supply_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Average_Discharge_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Average_Supply_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Exhaust_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Supply_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Building_Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Static_Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Reset_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Pressure_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Reset_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Load_Shed_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Hot_Water_Differential_Pressure_Load_Shed_Reset_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Pressure_Load_Shed_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Occupied_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Standby_Unit_On_Off_Status_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#On_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Unit_On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#On_Off_Status",
        "https://brickschema.org/schema/1.1.0/Brick#Status",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Standby_Unit_On_Off_Status"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Photovoltaic_Current_Output_Sensor_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Photovoltaic_Current_Output_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#PV_Current_Output_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Current_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Photovoltaic_Current_Output_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Current_Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Sensor",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Return_Supply_Fan_Differential_Speed_Setpoint_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Supply_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Return_Supply_Fan_Differential_Speed_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    },
    "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit_0": {
      "inferred_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Cooling_Discharge_Air_Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Flow_Setpoint",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ],
      "true_parents": [
        "https://brickschema.org/schema/1.1.0/Brick#Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Cooling_Discharge_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Min_Air_Flow_Setpoint_Limit",
        "https://brickschema.org/schema/1.1.0/Brick#Point",
        "https://brickschema.org/schema/1.1.0/Brick#Class",
        "https://brickschema.org/schema/1.1.0/Brick#Limit"
      ]
    }
  },
  "under_inferences": {},
  "wrong_inferencers": {}
}