Created
August 14, 2017 01:01
-
-
Save jboone/2b9bbca59a7eeff0b1a2bc41ef670930 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| --- LPC43xx.svd.orig 2017-08-03 20:37:12.501824574 -0700 | |
| +++ LPC43xx.svd 2017-08-03 22:25:24.933731557 -0700 | |
| @@ -142,82 +142,82 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_0_RISING_EDGE</name> | |
| <description>Rising edges on input 0.</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_0_FALLING_EDGE</name> | |
| <description>Falling edges on input 0.</description> | |
| <value>0x1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_1_RISING_EDGE</name> | |
| <description>Rising edges on input 1.</description> | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_1_FALLING_EDGE</name> | |
| <description>Falling edges on input 1.</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_2_RISING_EDGE</name> | |
| <description>Rising edges on input 2.</description> | |
| <value>0x4</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_2_FALLING_EDGE</name> | |
| <description>Falling edges on input 2.</description> | |
| <value>0x5</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_3_RISING_EDGE</name> | |
| <description>Rising edges on input 3.</description> | |
| <value>0x6</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_3_FALLING_EDGE</name> | |
| <description>Falling edges on input 3.</description> | |
| <value>0x7</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_4_RISING_EDGE</name> | |
| <description>Rising edges on input 4.</description> | |
| <value>0x8</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_4_FALLING_EDGE</name> | |
| <description>Falling edges on input 4.</description> | |
| <value>0x9</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_5_RISING_EDGE</name> | |
| <description>Rising edges on input 5.</description> | |
| <value>0xA</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_5_FALLING_EDGE</name> | |
| <description>Falling edges on input 5.</description> | |
| <value>0xB</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_6_RISING_EDGE</name> | |
| <description>Rising edges on input 6.</description> | |
| <value>0xC</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_6_FALLING_EDGE</name> | |
| <description>Falling edges on input 6.</description> | |
| <value>0xD</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>RISING_EDGES_ON_INPU</name> | |
| + <name>INPUT_7_RISING_EDGE</name> | |
| <description>Rising edges on input 7.</description> | |
| <value>0xE</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FALLING_EDGES_ON_INP</name> | |
| + <name>INPUT_7_FALLING_EDGE</name> | |
| <description>Falling edges on input 7.</description> | |
| <value>0xF</value> | |
| </enumeratedValue> | |
| @@ -3678,7 +3678,7 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLED__DEFAULT_</name> | |
| + <name>DISABLED</name> | |
| <description>Disabled (default). Disabling the DMA Controller reduces power consumption.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| @@ -4157,12 +4157,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>THE_DESTINATION_ADDR</name> | |
| + <name>AFTER_XFER_NO_INC</name> | |
| <description>The destination address is not incremented after each transfer.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>THE_DESTINATION_ADDR</name> | |
| + <name>AFTER_XFER_INC</name> | |
| <description>The destination address is incremented after each transfer.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -4229,12 +4229,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>THE_TERMINAL_COUNT_I</name> | |
| + <name>TC_INT_DISABLED</name> | |
| <description>The terminal count interrupt is disabled.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>THE_TERMINAL_COUNT_I</name> | |
| + <name>TC_INT_ENABLED</name> | |
| <description>The terminal count interrupt is enabled.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -4278,82 +4278,82 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_SPIFI</name> | |
| + <name>SPIFI_SCTMATCH2_SGPIO14_TIMER3MATCH1</name> | |
| <description>Source = SPIFI</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_0_MAT</name> | |
| + <name>TIMER0MATCH0_USART0TX_AESIN</name> | |
| <description>Source = Timer 0 match 0/UART0 transmit</description> | |
| <value>0x1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_0_MAT</name> | |
| + <name>TIMER0MATCH1_USART0RX_AESOUT</name> | |
| <description>Source = Timer 0 match 1/UART0 receive</description> | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_1_MAT</name> | |
| + <name>TIMER1MATCH0_UART1TX_I2S1DMAREQ1_SSP1TX</name> | |
| <description>Source = Timer 1 match 0/UART1 transmit</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_1_MAT</name> | |
| + <name>TIMER1MATCH1_UART1RX_I2S1DMAREQ2_SSP1RX</name> | |
| <description>Source = Timer 1 match 1/UART 1 receive</description> | |
| <value>0x4</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_2_MAT</name> | |
| + <name>TIMER2MATCH0_USART2TX_SSP1TX_SGPIO15</name> | |
| <description>Source = Timer 2 match 0/UART 2 transmit</description> | |
| <value>0x5</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_2_MAT</name> | |
| + <name>TIMER2MATCH1_USART2RX_SSP1RX_SGPIO14</name> | |
| <description>Source = Timer 2 match 1/UART 2 receive</description> | |
| <value>0x6</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_3_MAT</name> | |
| + <name>TIMER3MATCH0_UART3TX_SCTDMAREQ0_ADCHSWR</name> | |
| <description>Source = Timer 3 match 0/UART3 transmit/SCT DMA request 0</description> | |
| <value>0x7</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_TIMER_3_MAT</name> | |
| + <name>TIMER3MATCH1_UART3RX_SCTDMAREQ1_ADCHSRD</name> | |
| <description>Source = Timer 3 match 1/UART3 receive/SCT DMA request 1</description> | |
| <value>0x8</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_SSP0_RECEIV</name> | |
| + <name>SSP0RX_I2S0DMAREQ1_SCTDMAREQ1</name> | |
| <description>Source = SSP0 receive/I2S channel 0</description> | |
| <value>0x9</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_SSP0_TRANSM</name> | |
| + <name>SSP0TX_I2S0DMAREQ2_SCTDMAREQ0</name> | |
| <description>Source = SSP0 transmit/I2S channel 1</description> | |
| <value>0xA</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_SSP1_RECEIV</name> | |
| + <name>SSP1RX_SGPIO14_USART0TX</name> | |
| <description>Source = SSP1 receive</description> | |
| <value>0xB</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_SSP1_TRANSM</name> | |
| + <name>SSP1TX_SGPIO15_USART0RX</name> | |
| <description>Source = SSP1 transmit</description> | |
| <value>0xC</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_ADC0</name> | |
| + <name>ADC0_AESIN_SSP1RX_USART3RX</name> | |
| <description>Source = ADC0</description> | |
| <value>0xD</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_ADC1</name> | |
| + <name>ADC1_AESOUT_SSP1TX_USART3TX</name> | |
| <description>Source = ADC1</description> | |
| <value>0xE</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_EQ_DAC</name> | |
| + <name>DAC_SCTMATCH3_SGPIO15_TIMER3MATCH0</name> | |
| <description>Source = DAC</description> | |
| <value>0xF</value> | |
| </enumeratedValue> | |
| @@ -4366,82 +4366,82 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_SPIFI</name> | |
| + <name>SPIFI_SCTMATCH2_SGPIO14_TIMER3MATCH1</name> | |
| <description>Destination = SPIFI</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER0MATCH0_UART0TX_AESIN</name> | |
| <description>Destination = Timer 0 match 0/UART0 transmit</description> | |
| <value>0x1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER0MATCH1_UART0RX_AESOUT</name> | |
| <description>Destination = Timer 0 match 1/UART0 receive</description> | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER1MATCH0_UART1TX_I2S1DMAREQ1_SSP1TX</name> | |
| <description>Destination = Timer 1 match 0/UART1 transmit</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER1MATCH1_UART1RX_I2S1DMAREQ2_SSP1RX</name> | |
| <description>Destination = Timer 1 match 1/UART 1 receive</description> | |
| <value>0x4</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER2MATCH0_USART2TX_SSP1TX_SGPIO15</name> | |
| <description>Destination = Timer 2 match 0/UART 2 transmit</description> | |
| <value>0x5</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER2MATCH1_USART2RX_SSP1RX_SGPIO14</name> | |
| <description>Destination = Timer 2 match 1/UART 2 receive</description> | |
| <value>0x6</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER3MATCH0_UART3TX_SCTDMAREQ0_ADCHSWR</name> | |
| <description>Destination = Timer 3 match 0/UART3 transmit/SCT DMA request 0</description> | |
| <value>0x7</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_TIMER_</name> | |
| + <name>TIMER3MATCH1_UART3RX_SCTDMAREQ1_ADCHSRD</name> | |
| <description>Destination = Timer 3 match 1/UART3 receive/SCT DMA request 1</description> | |
| <value>0x8</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_SSP0_R</name> | |
| + <name>SSP0RX_I2S0DMAREQ1_SCTDMAREQ1</name> | |
| <description>Destination = SSP0 receive/I2S channel 0</description> | |
| <value>0x9</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_SSP0_T</name> | |
| + <name>SSP0TX_I2S0DMAREQ2_SCTDMAREQ0</name> | |
| <description>Destination = SSP0 transmit/I2S channel 1</description> | |
| <value>0xA</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_SSP1_R</name> | |
| + <name>SSP1RX_SGPIO14_USART0TX</name> | |
| <description>Destination = SSP1 receive</description> | |
| <value>0xB</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_SSP1_T</name> | |
| + <name>SSP1TX_SGPIO15_USART0RX</name> | |
| <description>Destination = SSP1 transmit</description> | |
| <value>0xC</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_ADC0</name> | |
| + <name>ADC0_AESIN_SSP1RX_USART3RX</name> | |
| <description>Destination = ADC0</description> | |
| <value>0xD</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_ADC1</name> | |
| + <name>ADC1_AESOUT_SSP1TX_USART3TX</name> | |
| <description>Destination = ADC1</description> | |
| <value>0xE</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DESTINATION_EQ_DAC</name> | |
| + <name>DAC_SCTMATCH3_SGPIO15_TIMER3MATCH0</name> | |
| <description>Destination = DAC</description> | |
| <value>0xF</value> | |
| </enumeratedValue> | |
| @@ -4454,42 +4454,42 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>MEMORY_TO_MEMORY</name> | |
| + <name>MEMORY_TO_MEMORY_DMA_CTRL</name> | |
| <description>Memory to memory (DMA control)</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>MEMORY_TO_PERIPHERAL</name> | |
| + <name>MEMORY_TO_PERIPHERAL_DMA_CTRL</name> | |
| <description>Memory to peripheral (DMA control)</description> | |
| <value>0x1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>PERIPHERAL_TO_MEMORY</name> | |
| + <name>PERIPHERAL_TO_MEMORY_DMA_CTRL</name> | |
| <description>Peripheral to memory (DMA control)</description> | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_PERIPHERAL_TO</name> | |
| + <name>PERIPHERAL_TO_PERIPHERAL_DMA_CTRL</name> | |
| <description>Source peripheral to destination peripheral (DMA control)</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_PERIPHERAL_TO</name> | |
| + <name>PERIPHERAL_TO_PERIPHERAL_CTRL</name> | |
| <description>Source peripheral to destination peripheral (destination control)</description> | |
| <value>0x4</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>MEMORY_TO_PERIPHERAL</name> | |
| + <name>MEMORY_TO_PERIPHERAL_CTRL</name> | |
| <description>Memory to peripheral (peripheral control)</description> | |
| <value>0x5</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>PERIPHERAL_TO_MEMORY</name> | |
| + <name>PERIPHERAL_CTRL_TO_MEMORY</name> | |
| <description>Peripheral to memory (peripheral control)</description> | |
| <value>0x6</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>SOURCE_PERIPHERAL_TO</name> | |
| + <name>PERIPHERAL_CTRL_TO_PERIPHERAL</name> | |
| <description>Source peripheral to destination peripheral (source control)</description> | |
| <value>0x7</value> | |
| </enumeratedValue> | |
| @@ -8777,7 +8777,7 @@ | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DISABLED</name> | |
| + <name>ENABLED</name> | |
| <description>The periodic schedule status is enabled.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -8795,7 +8795,7 @@ | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DISABLED</name> | |
| + <name>ENABLED</name> | |
| <description>Asynchronous schedule status is enabled.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -9461,12 +9461,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DEVICE_NOT_ATTACHED_</name> | |
| + <name>DEVICE_NOT_ATTACHED</name> | |
| <description>Device not attached A zero indicates that the device did not attach successfully or was forcibly disconnected by the software writing a zero to the Run bit in the USBCMD register. It does not state the device being disconnected or suspended.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DEVICE_ATTACHED__A_</name> | |
| + <name>DEVICE_ATTACHED</name> | |
| <description>Device attached. A one indicates that the device successfully attached and is operating in either high-speed mode or full-speed mode as indicated by the High Speed Port bit in this register.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -12960,12 +12960,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DEVICE_NOT_ATTACHED_</name> | |
| + <name>DEVICE_NOT_ATTACHED</name> | |
| <description>Device not attached A zero indicates that the device did not attach successfully or was forcibly disconnected by the software writing a zero to the Run bit in the USBCMD register. It does not state the device being disconnected or suspended.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>DEVICE_ATTACHED__A_</name> | |
| + <name>DEVICE_ATTACHED</name> | |
| <description>Device attached. A one indicates that the device successfully attached and is operating in either high-speed mode or full-speed mode as indicated by the High Speed Port bit in this register.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -17687,7 +17687,7 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>INPUT_TO_THE_EVENT_R</name> | |
| + <name>INPUT_TO_THE_EVENT_ROUTER</name> | |
| <description>Input to the event router.</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| @@ -17702,7 +17702,7 @@ | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>INPUT_TO_THE_EVENT_R</name> | |
| + <name>INPUT_TO_THE_EVENT_ROUTER_3</name> | |
| <description>Input to the event router.</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| @@ -17715,7 +17715,7 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>INPUT_TO_EVENT_ROUTE</name> | |
| + <name>INPUT_TO_EVENT_ROUTER</name> | |
| <description>Input to event router.</description> | |
| <value>0x0</value> | |
| </enumeratedValue> | |
| @@ -17730,7 +17730,7 @@ | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>INPUT_TO_EVENT_ROUTE</name> | |
| + <name>INPUT_TO_EVENT_ROUTE_3</name> | |
| <description>Input to event router.</description> | |
| <value>0x3</value> | |
| </enumeratedValue> | |
| @@ -37582,12 +37582,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>BREAK_INTERRUPT_STAT</name> | |
| + <name>INACTIVE</name> | |
| <description>Break interrupt status is inactive.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>BREAK_INTERRUPT_STAT</name> | |
| + <name>ACTIVE</name> | |
| <description>Break interrupt status is active.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -40017,10 +40017,7 @@ | |
| </register> | |
| <register> | |
| - <dim>3</dim> | |
| - <dimIncrement>0x4</dimIncrement> | |
| - <dimIndex>18-20</dimIndex> | |
| - <name>SFSP1_%s</name> | |
| + <name>SFSP1_18</name> | |
| <description>Pin configuration register for pins P1</description> | |
| <addressOffset>0x0C8</addressOffset> | |
| <access>read-write</access> | |
| @@ -40174,10 +40171,315 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| - <dim>3</dim> | |
| - <dimIncrement>0x4</dimIncrement> | |
| - <dimIndex>0-2</dimIndex> | |
| - <name>SFSP2_%s</name> | |
| + <name>SFSP1_19</name> | |
| + <description>Pin configuration register for pins P1</description> | |
| + <addressOffset>0x0CC</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP1_20</name> | |
| + <description>Pin configuration register for pins P1</description> | |
| + <addressOffset>0x0D0</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP2_0</name> | |
| <description>Pin configuration register for pins P2</description> | |
| <addressOffset>0x100</addressOffset> | |
| <access>read-write</access> | |
| @@ -40331,10 +40633,315 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| - <dim>3</dim> | |
| - <dimIncrement>0x4</dimIncrement> | |
| - <dimIndex>3-5</dimIndex> | |
| - <name>SFSP2_%s</name> | |
| + <name>SFSP2_1</name> | |
| + <description>Pin configuration register for pins P2</description> | |
| + <addressOffset>0x104</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP2_2</name> | |
| + <description>Pin configuration register for pins P2</description> | |
| + <addressOffset>0x108</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP2_3</name> | |
| <description>Pin configuration register for pins P2</description> | |
| <addressOffset>0x10C</addressOffset> | |
| <access>read-write</access> | |
| @@ -40504,6 +41111,346 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| + <name>SFSP2_4</name> | |
| + <description>Pin configuration register for pins P2</description> | |
| + <addressOffset>0x110</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset but must be enabled to transfer data from the I/O buffer to the pad.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHD</name> | |
| + <description>Select drive strength.</description> | |
| + <bitRange>[9:8]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>NORMAL_DRIVE_4_MA_D</name> | |
| + <description>Normal-drive: 4 mA drive strength</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>MEDIUM_DRIVE_8_MA_D</name> | |
| + <description>Medium-drive: 8 mA drive strength</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>HIGH_DRIVE_14_MA_DR</name> | |
| + <description>High-drive: 14 mA drive strength</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ULTRA_HIGH_DRIVE_20</name> | |
| + <description>Ultra high-drive: 20 mA drive strength</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:10]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP2_5</name> | |
| + <description>Pin configuration register for pins P2</description> | |
| + <addressOffset>0x114</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset but must be enabled to transfer data from the I/O buffer to the pad.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHD</name> | |
| + <description>Select drive strength.</description> | |
| + <bitRange>[9:8]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>NORMAL_DRIVE_4_MA_D</name> | |
| + <description>Normal-drive: 4 mA drive strength</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>MEDIUM_DRIVE_8_MA_D</name> | |
| + <description>Medium-drive: 8 mA drive strength</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>HIGH_DRIVE_14_MA_DR</name> | |
| + <description>High-drive: 14 mA drive strength</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ULTRA_HIGH_DRIVE_20</name> | |
| + <description>Ultra high-drive: 20 mA drive strength</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:10]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| <dim>7</dim> | |
| <dimIncrement>0x4</dimIncrement> | |
| <dimIndex>6-12</dimIndex> | |
| @@ -40661,10 +41608,7 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| - <dim>3</dim> | |
| - <dimIncrement>0x4</dimIncrement> | |
| - <dimIndex>0-2</dimIndex> | |
| - <name>SFSP3_%s</name> | |
| + <name>SFSP3_0</name> | |
| <description>Pin configuration register for pins P3</description> | |
| <addressOffset>0x180</addressOffset> | |
| <access>read-write</access> | |
| @@ -40818,6 +41762,314 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| + <name>SFSP3_1</name> | |
| + <description>Pin configuration register for pins P3</description> | |
| + <addressOffset>0x184</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP3_2</name> | |
| + <description>Pin configuration register for pins P3</description> | |
| + <addressOffset>0x188</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EHS</name> | |
| + <description>Select Slew rate.</description> | |
| + <bitRange>[5:5]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>SLOW_LOW_NOISE_WITH</name> | |
| + <description>Slow (low noise with medium speed)</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FAST_MEDIUM_NOISE_W</name> | |
| + <description>Fast (medium noise with fast speed)</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:8]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| <name>SFSP3_3</name> | |
| <description>Pin configuration register for pins P3</description> | |
| @@ -41761,10 +43013,7 @@ | |
| </fields> | |
| </register> | |
| <register> | |
| - <dim>3</dim> | |
| - <dimIncrement>0x4</dimIncrement> | |
| - <dimIndex>0-2</dimIndex> | |
| - <name>SFSP8_%s</name> | |
| + <name>SFSP8_0</name> | |
| <description>Pin configuration register for pins P8</description> | |
| <addressOffset>0x400</addressOffset> | |
| <access>read-write</access> | |
| @@ -41856,19 +43105,176 @@ | |
| </enumeratedValues> | |
| </field> | |
| <field> | |
| - <name>EHS</name> | |
| - <description>Select Slew rate.</description> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| <bitRange>[5:5]</bitRange> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>SLOW_LOW_NOISE_WITH</name> | |
| - <description>Slow (low noise with medium speed)</description> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>FAST_MEDIUM_NOISE_W</name> | |
| - <description>Fast (medium noise with fast speed)</description> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + | |
| + </field> | |
| + <field> | |
| + <name>EHD</name> | |
| + <description>Select drive strength</description> | |
| + <bitRange>[9:8]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>STANDARD_DRIVE_4_MA</name> | |
| + <description>Standard drive: 4 mA drive strength</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>MEDIUM_DRIVE_8_MA_D</name> | |
| + <description>Medium drive: 8 mA drive strength</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>HIGH_DRIVE_14_MA_DR</name> | |
| + <description>High drive: 14 mA drive strength</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ULTRA_HIGH_DRIVE_20</name> | |
| + <description>Ultra-high drive: 20 mA drive strength</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:10]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP8_1</name> | |
| + <description>Pin configuration register for pins P8</description> | |
| + <addressOffset>0x404</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| </enumeratedValues> | |
| @@ -41909,12 +43315,216 @@ | |
| </enumeratedValue> | |
| </enumeratedValues> | |
| </field> | |
| - <field> | |
| - <name>RESERVED</name> | |
| - <description>Reserved</description> | |
| - <bitRange>[31:8]</bitRange> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + </field> | |
| + <field> | |
| + <name>EHD</name> | |
| + <description>Select drive strength</description> | |
| + <bitRange>[9:8]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>STANDARD_DRIVE_4_MA</name> | |
| + <description>Standard drive: 4 mA drive strength</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>MEDIUM_DRIVE_8_MA_D</name> | |
| + <description>Medium drive: 8 mA drive strength</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>HIGH_DRIVE_14_MA_DR</name> | |
| + <description>High drive: 14 mA drive strength</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ULTRA_HIGH_DRIVE_20</name> | |
| + <description>Ultra-high drive: 20 mA drive strength</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:10]</bitRange> | |
| + | |
| + </field> | |
| + </fields> | |
| + </register> | |
| + <register> | |
| + <name>SFSP8_2</name> | |
| + <description>Pin configuration register for pins P8</description> | |
| + <addressOffset>0x408</addressOffset> | |
| + <access>read-write</access> | |
| + <resetValue>0</resetValue> | |
| + <resetMask>0xFFFFFFFF</resetMask> | |
| + <fields> | |
| + <field> | |
| + <name>MODE</name> | |
| + <description>Select pin function.</description> | |
| + <bitRange>[2:0]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_0_DEFAULT</name> | |
| + <description>Function 0 (default)</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_1</name> | |
| + <description>Function 1</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_2</name> | |
| + <description>Function 2</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_3</name> | |
| + <description>Function 3</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_4</name> | |
| + <description>Function 4</description> | |
| + <value>0x4</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_5</name> | |
| + <description>Function 5</description> | |
| + <value>0x5</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_6</name> | |
| + <description>Function 6</description> | |
| + <value>0x6</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>FUNCTION_7</name> | |
| + <description>Function 7</description> | |
| + <value>0x7</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| </field> | |
| + <field> | |
| + <name>EPD</name> | |
| + <description>Enable pull-down resistor at pad.</description> | |
| + <bitRange>[3:3]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_DOWN</name> | |
| + <description>Disable pull-down.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_DOWN</name> | |
| + <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EPUN</name> | |
| + <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description> | |
| + <bitRange>[4:4]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_PULL_UP</name> | |
| + <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_PULL_UP</name> | |
| + <description>Disable pull-up.</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>EZI</name> | |
| + <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description> | |
| + <bitRange>[6:6]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_BUFFER</name> | |
| + <description>Disable input buffer</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_BUFFER</name> | |
| + <description>Enable input buffer</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>ZIF</name> | |
| + <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>ENABLE_INPUT_GLITCH</name> | |
| + <description>Enable input glitch filter</description> | |
| + <value>0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>DISABLE_INPUT_GLITCH</name> | |
| + <description>Disable input glitch filter</description> | |
| + <value>1</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[7:7]</bitRange> | |
| + | |
| + </field> | |
| + <field> | |
| + <name>EHD</name> | |
| + <description>Select drive strength</description> | |
| + <bitRange>[9:8]</bitRange> | |
| + <enumeratedValues> | |
| + <name>ENUM</name> | |
| + <enumeratedValue> | |
| + <name>STANDARD_DRIVE_4_MA</name> | |
| + <description>Standard drive: 4 mA drive strength</description> | |
| + <value>0x0</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>MEDIUM_DRIVE_8_MA_D</name> | |
| + <description>Medium drive: 8 mA drive strength</description> | |
| + <value>0x1</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>HIGH_DRIVE_14_MA_DR</name> | |
| + <description>High drive: 14 mA drive strength</description> | |
| + <value>0x2</value> | |
| + </enumeratedValue> | |
| + <enumeratedValue> | |
| + <name>ULTRA_HIGH_DRIVE_20</name> | |
| + <description>Ultra-high drive: 20 mA drive strength</description> | |
| + <value>0x3</value> | |
| + </enumeratedValue> | |
| + </enumeratedValues> | |
| + </field> | |
| + <field> | |
| + <name>RESERVED</name> | |
| + <description>Reserved</description> | |
| + <bitRange>[31:10]</bitRange> | |
| + | |
| + </field> | |
| </fields> | |
| </register> | |
| <register> | |
| @@ -50403,12 +52013,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>THE_MESSAGE_DIRECTIO</name> | |
| + <name>ACCEPTANCE_FILTER</name> | |
| <description>The message direction bit (DIR) is used for acceptance filtering.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>THE_MESSAGE_DIRECTIO</name> | |
| + <name>NO_EFFECT</name> | |
| <description>The message direction bit (DIR) has no effect on acceptance filtering.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| @@ -50421,12 +52031,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>THE_EXTENDED_IDENTIF</name> | |
| + <name>ACCEPTANCE_FILTER</name> | |
| <description>The extended identifier bit (IDE) is used for acceptance filtering.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>THE_EXTENDED_IDENTIF</name> | |
| + <name>NO_EFFECT</name> | |
| <description>The extended identifier bit (IDE) has no effect on acceptance filtering.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| @@ -50523,12 +52133,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>THE_MESSAGE_OBJECT_I</name> | |
| + <name>THE_MESSAGE_OBJECT_IS_CONFIGURED</name> | |
| <description>The message object is configured and should be considered by the message handler.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>THE_MESSAGE_OBJECT_I</name> | |
| + <name>THE_MESSAGE_OBJECT_IS_IGNORED</name> | |
| <description>The message object is ignored by the message handler.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| @@ -52213,12 +53823,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52324,12 +53934,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52435,12 +54045,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52546,12 +54156,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52657,12 +54267,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52768,12 +54378,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52879,12 +54489,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -52990,12 +54600,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53101,12 +54711,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53212,12 +54822,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53328,12 +54938,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53444,12 +55054,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53555,12 +55165,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53666,12 +55276,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53712,8 +55322,8 @@ | |
| <value>0x1</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>TBD__I2S0_TX_MWS</name> | |
| - <description>TBD - I2S0_TX_MWS</description> | |
| + <name>I2S0_TX_MWS</name> | |
| + <description>I2S0_TX_MWS</description> | |
| <value>0x2</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| @@ -53782,12 +55392,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -53898,12 +55508,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54014,12 +55624,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54125,12 +55735,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54236,12 +55846,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54347,12 +55957,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54463,12 +56073,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54579,12 +56189,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54690,12 +56300,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54806,12 +56416,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -54922,12 +56532,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -55068,12 +56678,12 @@ | |
| <enumeratedValues> | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -55186,12 +56796,12 @@ | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -55308,12 +56918,12 @@ | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -55425,12 +57035,12 @@ | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -55542,12 +57152,12 @@ | |
| <name>ENUM</name> | |
| <enumeratedValue> | |
| - <name>DISABLE__SYNCHRONIZ</name> | |
| + <name>DISABLE_SYNCHRONIZATION</name> | |
| <description>Disable synchronization.</description> | |
| <value>0</value> | |
| </enumeratedValue> | |
| <enumeratedValue> | |
| - <name>ENABLE__SYNCHRONIZA</name> | |
| + <name>ENABLE_SYNCHRONIZATION</name> | |
| <description>Enable synchronization.</description> | |
| <value>1</value> | |
| </enumeratedValue> | |
| @@ -56327,7 +57937,7 @@ | |
| <resetMask>0xFFFFFFFF</resetMask> | |
| <fields> | |
| <field> | |
| - <name>TRIGGER__MASK</name> | |
| + <name>TRIGGER_MASK</name> | |
| <description>00 = triggers off 01 = software trigger only 10 = external trigger only 11 = both triggers allowed</description> | |
| <bitRange>[1:0]</bitRange> | |
| </field> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment