T-CameraPlus-S3 esphome config

README.md

https://github.com/Xinyuan-LilyGO/T-CameraPlus-S3

https://www.cnx-software.com/2024/05/31/lilygo-t-camera-plus-s3-an-esp32-s3-powered-dev-board-with-night-vision-camera-and-touchscreen-display/

https://www.lilygo.cc/products/t-camera-plus-s3

lilygo-t-cameraplus-s3.yaml

esphome:
  name: newcamera
  friendly_name: newcamera

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:


ota:
  

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Newcamera Fallback Hotspot"
    password: "VKQl6C17qtQW"

captive_portal:
    

output:
  - platform: ledc
    pin: GPIO46
    id: screen_led

light:
  - platform: monochromatic
    output: screen_led
    id: backlight
    name: Backlight
    restore_mode: ALWAYS_ON

spi:
  clk_pin: GPIO36
  mosi_pin: GPIO35
  miso_pin: GPIO37

font:
  - file: "gfonts://Roboto"
    id: testfont
    size: 20

color:
  - id: my_red
    red: 100%
    green: 3%
    blue: 5%

display:
  - platform: ili9xxx
    model: ST7789V
    dc_pin: GPIO45
    cs_pin: GPIO34
    reset_pin: GPIO33
    invert_colors: true
    dimensions:
      width: 240
      height: 240
    lambda: |-
      it.print(0, 10, id(testfont), "Hello World!");