Matebook X DSDT - Touchpad (TPL1)

matebook_dsdt.md

    Scope (_SB.PCI0.I2C1)
    {
        Device (TPL1)
        {
            Name (HID2, Zero)
            Name (SBFB, ResourceTemplate ()
            {
                I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                    0x00, ResourceConsumer, _Y23, Exclusive,
                    )
            })
            Name (SBFG, ResourceTemplate ()
            {
                GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                    "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0000
                    }
            })
            Name (SBFI, ResourceTemplate ()
            {
                Interrupt (ResourceConsumer, Level, ActiveLow, ExclusiveAndWake, ,, _Y24)
                {
                    0x00000000,
                }
            })
            CreateWordField (SBFB, \_SB.PCI0.I2C1.TPL1._Y23._ADR, BADR)  // _ADR: Address
            CreateDWordField (SBFB, \_SB.PCI0.I2C1.TPL1._Y23._SPE, SPED)  // _SPE: Speed
            CreateDWordField (SBFI, \_SB.PCI0.I2C1.TPL1._Y24._INT, INT2)  // _INT: Interrupts
            CreateWordField (SBFG, 0x17, INT1)
            Method (_INI, 0, NotSerialized)  // _INI: Initialize
            {
                If ((OSYS < 0x07DC))
                {
                    SRXO (GPLI, One)
                }

                INT1 = GNUM (GPLI)
                INT2 = INUM (GPLI)
                If ((SDM1 == Zero))
                {
                    SHPO (GPLI, One)
                }

                If ((TCTP == One))
                {
                    _HID = "SYNA1D31"
                    HID2 = 0x20
                    BADR = 0x2C
                    SPED = 0x00061A80
                    Return (Zero)
                }

                If ((TCTP == 0x02))
                {
                    _HID = "ELAN2201"
                    HID2 = One
                    BADR = 0x15
                    SPED = 0x00061A80
                    Return (Zero)
                }

                _HID = "SYNA1D31"
                HID2 = 0x20
                BADR = 0x2C
                SPED = 0x00061A80
                Return (Zero)
            }

            Name (_HID, "XXXX0000")  // _HID: Hardware ID
            Name (_CID, "PNP0C50" /* HID Protocol Device (I2C bus) */)  // _CID: Compatible ID
            Name (_S0W, 0x04)  // _S0W: S0 Device Wake State
            Method (_DSM, 4, Serialized)  // _DSM: Device-Specific Method
            {
                If ((Arg0 == HIDG))
                {
                    Return (HIDD (Arg0, Arg1, Arg2, Arg3, HID2))
                }

                If ((Arg0 == TP7G))
                {
                    Return (TP7D (Arg0, Arg1, Arg2, Arg3, SBFB, SBFG))
                }

                Return (Buffer (One)
                {
                     0x00                                             // .
                })
            }

            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If ((SDS1 != Zero))
                {
                    Return (0x0F)
                }

                Return (Zero)
            }

            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
            {
                If ((OSYS < 0x07DC))
                {
                    Return (SBFI) /* \_SB_.PCI0.I2C1.TPL1.SBFI */
                }

                If ((SDM1 == Zero))
                {
                    Return (ConcatenateResTemplate (SBFB, SBFG))
                }

                Return (ConcatenateResTemplate (SBFB, SBFI))
            }
        }

        Device (IMP3)
        {
            Name (_ADR, Zero)  // _ADR: Address
            Name (_HID, "IMPJ0003")  // _HID: Hardware ID
            Name (_CID, "IMPJ0003")  // _CID: Compatible ID
            Name (_UID, One)  // _UID: Unique ID
            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If ((HAID == One))
                {
                    Return (0x0F)
                }

                Return (Zero)
            }

            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
            {
                Name (SBUF, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x006E, ControllerInitiated, 0x00061A80,
                        AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                        0x00, ResourceConsumer, , Exclusive,
                        )
                })
                Return (SBUF) /* \_SB_.PCI0.I2C1.IMP3._CRS.SBUF */
            }
        }
    }
````